[Dx4win] DXCC Challenge

2023-06-30 Thread Scott Millick K9SM via DX4WIN 

wam not spam
ignore above

I am working on the DXCC Challenge and I  know F8 is the key to find 
a call which I have made a contact with. As this has been some years 
ago and the award was not conceived at that time when I had a big 
station I need the following report information.


I want to see all stations that are not on the regular report that I 
have worked for any country on the different bands and modes that I 
do not have credit for. For example I want to see every other 
contact(s) I have made with any of my none-credited countries Ion 
every band and mode.  I have used F8 and know if u use the page up 
and down key does a few but would like to have a report on the band 
or mode I can use. Not sure if possible but anyone with ideas I would 
appreciate them.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] help with DX4WIN

2023-06-30 Thread Keith Beebe W3KB 
Let’s see if he can get things running on the one port (in his case Com 7 
enhanced Yaesu port)  before even trying a port splitter.

One thing at a time.  The bottom line is he is trying to get DX4WIN working.

Keith W3KB


From: Tim moore 
Sent: Friday, June 30, 2023 9:48 PM
To: Keith Beebe W3KB 
Cc: Courtney Judd ; DX4WIN Reflector 
Subject: Re: [Dx4win] help with DX4WIN

Or again, use a Virtual Serial Splitter. I'm using LPB2. It's free. I run 
multiple apps SIMULTANEOUSLY.my assigning "virtual" ports via that splitter 
software. That way, I can run many apps .to the ONE port (the enhanced 
port) to the radio. I assign "virtual" portsIE 8, 9, 10etc.that run 
SIMULTANEOUSLY. That way, there is no conflict.

K4TK

[https://ci3.googleusercontent.com/mail-sig/AIorK4wIVub_JWx_nJluE1vkIqTIWKhpOLgBoMgsxul1ysPNKYsaDR3VrI6IkdE4Opyt1nYVUEFjJw8]
  
[https://ci3.googleusercontent.com/mail-sig/AIorK4xvDlCVayixH8caeP-wxruMFBbTukdT-3vtlbddy_6PhaPgqZEXs1444-7ZyrqEV_zbMSO4EWg]
  
[https://ci3.googleusercontent.com/mail-sig/AIorK4xopb4fTpOdcYNbdqPDhlhGjY3C-X6iIM4nNNwOo_lZAjF8WSkBJghGeFnGnz88Q0st5IjUmp8]

Tim Moore
PMP


On Fri, Jun 30, 2023 at 8:38 PM Keith Beebe W3KB 
mailto:ke...@w3kb.net>> wrote:
There will be a conflict if you have WSJT-X (or anything else) running on that 
port and you try to start DX4WIN.

Make sure nothing else is accessing that port (in this case your Com 7) and see 
if DX4WIN launches on its own.

You must use the G4IRN rig file designed for the Yaesu FTDX101.  I am using the 
following parameters in the Radio Setup section of DX4WIN.

38,400 Baud Rate; Com 6 (in my case...yours is Com 7), 250 MS Poll Rate, Max 
Tries 1 and RTS High Checked . DTS High Checked is Blank.

You must also set the DX4WIN Radio parameter to Start Radio.

Again, make sure nothing else (such as WSJT-X) is running on that port.

Keith W3KB


-Original Message-
From: dx4win-boun...@mailman.qth.net 
mailto:dx4win-boun...@mailman.qth.net>> On 
Behalf Of Tim moore
Sent: Friday, June 30, 2023 9:00 PM
To: Courtney Judd mailto:k...@k4wi.net>>
Cc: DX4WIN Reflector mailto:dx4win@mailman.qth.net>>
Subject: Re: [Dx4win] help with DX4WIN

If you have multiple applications trying to hit the same comm port, you'll 
likely need to try a virtual serial splitter app. I'm using one to run DX4WIN 
and  HDSDR with Omnirig on the same enhanced serial port on my 101D.
I can't run two apps on one port without that virtual serial splitter.
Some software/apps have built-in virtual splitter capabilities.  But DX4WIN and 
HDSDR don't have that capability.

And of course I'm running the latest rig file for the 101D in DX4WIN.

There are several virtual splitter apps available.  Most or all are free.

K4TK

On Fri, Jun 30, 2023, 7:05 PM Courtney Judd 
mailto:k...@k4wi.net>> wrote:

> I have been playing around with my new FTdx101MP and have it working
> with everything except DX4WIN. For some reason it can not find COM
> port
> 7 which is the enhanced port Yaesu gives with their downloads. I get a
> message ie_Bdid specified com port can not be found. It's there
> working with Writelog and WSJT-X!~ Any suggestions of how to sort this out?
> Thanks, 73's Cort K4WI
>
> Sent from Postbox 
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] help with DX4WIN

2023-06-30 Thread Tim moore 
Or again, use a Virtual Serial Splitter. I'm using LPB2. It's free. I run
multiple apps SIMULTANEOUSLY.my assigning "virtual" ports via that
splitter software. That way, I can run many apps .to the ONE port (the
enhanced port) to the radio. I assign "virtual" portsIE 8, 9,
10etc.that run SIMULTANEOUSLY. That way, there is no conflict.

K4TK



Tim Moore
PMP


On Fri, Jun 30, 2023 at 8:38 PM Keith Beebe W3KB  wrote:

> There will be a conflict if you have WSJT-X (or anything else) running on
> that port and you try to start DX4WIN.
>
> Make sure nothing else is accessing that port (in this case your Com 7)
> and see if DX4WIN launches on its own.
>
> You must use the G4IRN rig file designed for the Yaesu FTDX101.  I am
> using the following parameters in the Radio Setup section of DX4WIN.
>
> 38,400 Baud Rate; Com 6 (in my case...yours is Com 7), 250 MS Poll Rate,
> Max Tries 1 and RTS High Checked . DTS High Checked is Blank.
>
> You must also set the DX4WIN Radio parameter to Start Radio.
>
> Again, make sure nothing else (such as WSJT-X) is running on that port.
>
> Keith W3KB
>
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net  On
> Behalf Of Tim moore
> Sent: Friday, June 30, 2023 9:00 PM
> To: Courtney Judd 
> Cc: DX4WIN Reflector 
> Subject: Re: [Dx4win] help with DX4WIN
>
> If you have multiple applications trying to hit the same comm port, you'll
> likely need to try a virtual serial splitter app. I'm using one to run
> DX4WIN and  HDSDR with Omnirig on the same enhanced serial port on my 101D.
> I can't run two apps on one port without that virtual serial splitter.
> Some software/apps have built-in virtual splitter capabilities.  But
> DX4WIN and HDSDR don't have that capability.
>
> And of course I'm running the latest rig file for the 101D in DX4WIN.
>
> There are several virtual splitter apps available.  Most or all are free.
>
> K4TK
>
> On Fri, Jun 30, 2023, 7:05 PM Courtney Judd  wrote:
>
> > I have been playing around with my new FTdx101MP and have it working
> > with everything except DX4WIN. For some reason it can not find COM
> > port
> > 7 which is the enhanced port Yaesu gives with their downloads. I get a
> > message ie_Bdid specified com port can not be found. It's there
> > working with Writelog and WSJT-X!~ Any suggestions of how to sort this
> out?
> > Thanks, 73's Cort K4WI
> >
> > Sent from Postbox 
> > __
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:DX4WIN@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> >
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] help with DX4WIN

2023-06-30 Thread Keith Beebe W3KB 
There will be a conflict if you have WSJT-X (or anything else) running on that 
port and you try to start DX4WIN.

Make sure nothing else is accessing that port (in this case your Com 7) and see 
if DX4WIN launches on its own.

You must use the G4IRN rig file designed for the Yaesu FTDX101.  I am using the 
following parameters in the Radio Setup section of DX4WIN.

38,400 Baud Rate; Com 6 (in my case...yours is Com 7), 250 MS Poll Rate, Max 
Tries 1 and RTS High Checked . DTS High Checked is Blank.

You must also set the DX4WIN Radio parameter to Start Radio.

Again, make sure nothing else (such as WSJT-X) is running on that port.

Keith W3KB


-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Tim moore
Sent: Friday, June 30, 2023 9:00 PM
To: Courtney Judd 
Cc: DX4WIN Reflector 
Subject: Re: [Dx4win] help with DX4WIN

If you have multiple applications trying to hit the same comm port, you'll 
likely need to try a virtual serial splitter app. I'm using one to run DX4WIN 
and  HDSDR with Omnirig on the same enhanced serial port on my 101D.
I can't run two apps on one port without that virtual serial splitter.
Some software/apps have built-in virtual splitter capabilities.  But DX4WIN and 
HDSDR don't have that capability.

And of course I'm running the latest rig file for the 101D in DX4WIN.

There are several virtual splitter apps available.  Most or all are free.

K4TK

On Fri, Jun 30, 2023, 7:05 PM Courtney Judd  wrote:

> I have been playing around with my new FTdx101MP and have it working 
> with everything except DX4WIN. For some reason it can not find COM 
> port
> 7 which is the enhanced port Yaesu gives with their downloads. I get a 
> message ie_Bdid specified com port can not be found. It's there 
> working with Writelog and WSJT-X!~ Any suggestions of how to sort this out?
> Thanks, 73's Cort K4WI
>
> Sent from Postbox  
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] help with DX4WIN

2023-06-30 Thread Tim moore 
If you have multiple applications trying to hit the same comm port, you'll
likely need to try a virtual serial splitter app. I'm using one to run
DX4WIN and  HDSDR with Omnirig on the same enhanced serial port on my 101D.
I can't run two apps on one port without that virtual serial splitter.
Some software/apps have built-in virtual splitter capabilities.  But DX4WIN
and HDSDR don't have that capability.

And of course I'm running the latest rig file for the 101D in DX4WIN.

There are several virtual splitter apps available.  Most or all are free.

K4TK

On Fri, Jun 30, 2023, 7:05 PM Courtney Judd  wrote:

> I have been playing around with my new FTdx101MP and have it working
> with everything except DX4WIN. For some reason it can not find COM port
> 7 which is the enhanced port Yaesu gives with their downloads. I get a
> message ie_Bdid specified com port can not be found. It's there working
> with Writelog and WSJT-X!~ Any suggestions of how to sort this out?
> Thanks, 73's Cort K4WI
>
> Sent from Postbox 
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] help with DX4WIN

2023-06-30 Thread Courtney Judd 
I have been playing around with my new FTdx101MP and have it working 
with everything except DX4WIN. For some reason it can not find COM port 
7 which is the enhanced port Yaesu gives with their downloads. I get a 
message ie_Bdid specified com port can not be found. It's there working 
with Writelog and WSJT-X!~ Any suggestions of how to sort this out? 
Thanks, 73's Cort K4WI


Sent from Postbox 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] DX4WIN country file Release #23.22 - 30 June 2023

2023-06-30 Thread Jim Reisert AD1C 
DX4WIN Country File release #23.22 is now available from:

https://www.country-files.com/dx4win-info/

You can read the release notes at:

https://www.country-files.com/dx4win-cty-23.22-30-june-2023/

DX4WIN 9 users should use Help | Check for Updates from the main menu.
Note that there may be a delay between this announcement and when the
updated country file is actually available.

Users of older versions of DX4WIN should use the DX4WIN Data Updater:

https://ad1c.us/dx4win/updater/

Please inform me of any corrections.

73 - Jim AD1C

-- 
Jim Reisert AD1C, , https://ad1c.us



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html