Re: [Dx4win] JT65 in report

2017-08-13 Thread Kostas SV1DPI 

It has been corrected

...73 de Kostas SV1DPI
  (One of SZ1A-EP6T)

Στις 13/8/2017 10:18 πμ, ο OZ0J Joe έγραψε:

-> As a beta tester, I find it easier to import my WSJT-X log as an ADIF
file every now and then.

In the beta version will the RST be correct imported according to WSJT-X? Or
will it be 599 as other QSOs?


73 Joe, OZ0J

http://english.oz0j.dk
Skype ID from the shack: onair-oz0j.dk


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-13 Thread OZ0J Joe 
-> As a beta tester, I find it easier to import my WSJT-X log as an ADIF
file every now and then.

In the beta version will the RST be correct imported according to WSJT-X? Or
will it be 599 as other QSOs?


73 Joe, OZ0J

http://english.oz0j.dk
Skype ID from the shack: onair-oz0j.dk


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-12 Thread Jim Reisert AD1C 
On Fri, Aug 11, 2017 at 3:16 PM, Mike Cizek W0VTT wrote:

> FWIW, I find it easier to log the QSOs directly in DX4WIN, rather than
> importing my WSJT-X log.

I am the opposite.  As a beta tester, I find it easier to import my
WSJT-X log as an ADIF file every now and then.  The frequency of the
imported QSOs includes the frequency offset too.  I.e. if the radio
dial says 50313 KHz and the station was +1500 Hz, the logged frequency
will be 50314.5 KHz.  And the QSO start/end times are from the actual
WSJT sequence, not when you typed the QSO into DX4WIN.

73 - Jim AD1C

--
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-11 Thread N4QS, Dave Perry 
Yes, JT65 does get imported into the mode field.  I was thinking about JT9
and FT8.  Hopefully those new modes are coming with the new version.  And
Mike is right--F8 will not work, but creating a group should do it.

73,
Dave, N4QS

-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com] 
Sent: Friday, August 11, 2017 4:35 PM
To: 'Robert Garceau' <rgarc...@snet.net>; 'N4QS, Dave Perry' <n...@vci.net>;
dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

Hello Bob,

The program only does phone, cw, and digital because that is what the League
counts for DXCC; they don't care which digital mode you use for your digital
DXCC.  The reports generator looks at the entire log, or a selection, but
will not recognize the F8 filter.

There are two ways to get the report info you want.  One (I think the
easiest) is to use the method I described in my last email.  The other would
be to assign all of your JT65 QSOs to a group, make a selection (different
than a filter) of that group number, and do your report on the selection.

73,
Mike W0VTT

-Original Message-
From: Robert Garceau [mailto:rgarc...@snet.net]
Sent: Friday, 11 August, 2017 16:25
To: 'Mike Cizek W0VTT'; 'N4QS, Dave Perry'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

I have version 8.02 and it does accept JT65 in the mode column of all the
q's that import from WSJT-X. And uploading to LOTW is not a problem. What I
tried to do was go to reports>report generator and do a search by mode. JT65
doesn't show, only PHONE, CW and DIG. 

Bob, W1EQ

-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com]
Sent: Friday, August 11, 2017 5:16 PM
To: 'N4QS, Dave Perry'; 'Robert Garceau'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

The F8 filter will not work this way; the report will still look at all of
the QSOs in your log.  There are a couple of ways to do it, but I think the
easiest would be to filter for JT65, export the filtered QSOs to another log
file, and do your report(s) from that file.  None of the ARRL awards care
about signal reports, so you don't need them for a submission.

Paul has announced that he is working on a new version and it is in beta
test.  I'm sure he is reading the reflector and will have this import thing
corrected in the new version.

FWIW, I find it easier to log the QSOs directly in DX4WIN, rather than
importing my WSJT-X log.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of N4QS, Dave Perry
Sent: Friday, 11 August, 2017 15:28
To: 'Robert Garceau'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] JT65 in report

Robert,

If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping.  You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for this QSO box.
If you are entering the QSOs manually, you can enter JT65 directly into the
Notes for the QSO box.  Once you have JT65 entered into the Notes for this
QSO box for all of your Jt65 QSOs, you can do a search by pressing F8 and
then entering JT65 in the Notes box -- when you hit enter all of your JT65
Qs should be displayed.  With this filter displayed, you should be able to
then run reports as you want.

Rumor has it that Paul may be working on a new version that will fix this
problem.  Can any beta testers speak to this?

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 3:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-11 Thread Mike Cizek W0VTT 
Hello Bob,

The program only does phone, cw, and digital because that is what the League
counts for DXCC; they don't care which digital mode you use for your digital
DXCC.  The reports generator looks at the entire log, or a selection, but
will not recognize the F8 filter.

There are two ways to get the report info you want.  One (I think the
easiest) is to use the method I described in my last email.  The other would
be to assign all of your JT65 QSOs to a group, make a selection (different
than a filter) of that group number, and do your report on the selection.

73,
Mike W0VTT

-Original Message-
From: Robert Garceau [mailto:rgarc...@snet.net] 
Sent: Friday, 11 August, 2017 16:25
To: 'Mike Cizek W0VTT'; 'N4QS, Dave Perry'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

I have version 8.02 and it does accept JT65 in the mode column of all the
q's that import from WSJT-X. And uploading to LOTW is not a problem. What I
tried to do was go to reports>report generator and do a search by mode. JT65
doesn't show, only PHONE, CW and DIG. 

Bob, W1EQ

-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com] 
Sent: Friday, August 11, 2017 5:16 PM
To: 'N4QS, Dave Perry'; 'Robert Garceau'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

The F8 filter will not work this way; the report will still look at all of
the QSOs in your log.  There are a couple of ways to do it, but I think the
easiest would be to filter for JT65, export the filtered QSOs to another log
file, and do your report(s) from that file.  None of the ARRL awards care
about signal reports, so you don't need them for a submission.

Paul has announced that he is working on a new version and it is in beta
test.  I'm sure he is reading the reflector and will have this import thing
corrected in the new version.

FWIW, I find it easier to log the QSOs directly in DX4WIN, rather than
importing my WSJT-X log.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of N4QS, Dave Perry
Sent: Friday, 11 August, 2017 15:28
To: 'Robert Garceau'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] JT65 in report

Robert,

If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping.  You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for this QSO box.
If you are entering the QSOs manually, you can enter JT65 directly into the
Notes for the QSO box.  Once you have JT65 entered into the Notes for this
QSO box for all of your Jt65 QSOs, you can do a search by pressing F8 and
then entering JT65 in the Notes box -- when you hit enter all of your JT65
Qs should be displayed.  With this filter displayed, you should be able to
then run reports as you want.

Rumor has it that Paul may be working on a new version that will fix this
problem.  Can any beta testers speak to this?

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 3:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-11 Thread Robert Garceau 
I have version 8.02 and it does accept JT65 in the mode column of all the
q's that import from WSJT-X. And uploading to LOTW is not a problem. What I
tried to do was go to reports>report generator and do a search by mode. JT65
doesn't show, only PHONE, CW and DIG. 

Bob, W1EQ

-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com] 
Sent: Friday, August 11, 2017 5:16 PM
To: 'N4QS, Dave Perry'; 'Robert Garceau'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

The F8 filter will not work this way; the report will still look at all of
the QSOs in your log.  There are a couple of ways to do it, but I think the
easiest would be to filter for JT65, export the filtered QSOs to another log
file, and do your report(s) from that file.  None of the ARRL awards care
about signal reports, so you don't need them for a submission.

Paul has announced that he is working on a new version and it is in beta
test.  I'm sure he is reading the reflector and will have this import thing
corrected in the new version.

FWIW, I find it easier to log the QSOs directly in DX4WIN, rather than
importing my WSJT-X log.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of N4QS, Dave Perry
Sent: Friday, 11 August, 2017 15:28
To: 'Robert Garceau'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] JT65 in report

Robert,

If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping.  You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for this QSO box.
If you are entering the QSOs manually, you can enter JT65 directly into the
Notes for the QSO box.  Once you have JT65 entered into the Notes for this
QSO box for all of your Jt65 QSOs, you can do a search by pressing F8 and
then entering JT65 in the Notes box -- when you hit enter all of your JT65
Qs should be displayed.  With this filter displayed, you should be able to
then run reports as you want.

Rumor has it that Paul may be working on a new version that will fix this
problem.  Can any beta testers speak to this?

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 3:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-11 Thread Mike Cizek W0VTT 
The F8 filter will not work this way; the report will still look at all of
the QSOs in your log.  There are a couple of ways to do it, but I think the
easiest would be to filter for JT65, export the filtered QSOs to another log
file, and do your report(s) from that file.  None of the ARRL awards care
about signal reports, so you don't need them for a submission.

Paul has announced that he is working on a new version and it is in beta
test.  I'm sure he is reading the reflector and will have this import thing
corrected in the new version.

FWIW, I find it easier to log the QSOs directly in DX4WIN, rather than
importing my WSJT-X log.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of N4QS, Dave Perry
Sent: Friday, 11 August, 2017 15:28
To: 'Robert Garceau'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] JT65 in report

Robert,

If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping.  You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for this QSO box.
If you are entering the QSOs manually, you can enter JT65 directly into the
Notes for the QSO box.  Once you have JT65 entered into the Notes for this
QSO box for all of your Jt65 QSOs, you can do a search by pressing F8 and
then entering JT65 in the Notes box -- when you hit enter all of your JT65
Qs should be displayed.  With this filter displayed, you should be able to
then run reports as you want.

Rumor has it that Paul may be working on a new version that will fix this
problem.  Can any beta testers speak to this?

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 3:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-11 Thread Dan Violette 
Filter for JT65 before creating the Report.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 1:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-11 Thread N4QS, Dave Perry 
Robert,

If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping.  You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for this QSO box.
If you are entering the QSOs manually, you can enter JT65 directly into the
Notes for the QSO box.  Once you have JT65 entered into the Notes for this
QSO box for all of your Jt65 QSOs, you can do a search by pressing F8 and
then entering JT65 in the Notes box -- when you hit enter all of your JT65
Qs should be displayed.  With this filter displayed, you should be able to
then run reports as you want.

Rumor has it that Paul may be working on a new version that will fix this
problem.  Can any beta testers speak to this?

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 3:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65

2017-06-23 Thread Lee Hallin 
Re: NotePad adding the .txt suffix when saving a file, if you surround
the file name with double quotes, it will use the name between the "'s
as the file name (Eg.  "n7cw.adi").

Lee
>>> Bud Semon  6/20/2017 8:58 AM >>>


Paul,

Are you able to figure out what ADIF version that BV7 is using? 
Perhaps it
is an older version that will not accept some data that your middle
program
is putting in the ADIF file.

Also check that the program you use to modify the ADIF file is saving
the
file with the .adi extension.  When I use Notepad to modify an ADIF
file,
it will save the file as something like n7cw.adi.txt

Good luck.

73, Bud  N7CW

On Tue, Jun 20, 2017 at 8:02 AM, Paul F6EXV  wrote:

> Mark
> I can do that, but the label will not show the proper report.
> I cannot change it in BV7 as they will not be imported through adif
> conversion.
> 73
> Paul F6EXV
>
> Le 20/06/2017 à 17:00, Mark a écrit :
>
>> Hello Paul,
>>
>> In the "Notes for this QSO" field, I insert the report sent and the
report
>> received.
>>
>> For example:
>>R -11   S -2
>>
>> Since WSJT-X keeps all of each QSO's information in a text file, the
sent
>> and received reports are always available to retrieve.
>>
>> 73 & CU on JT-65A,
>>
>> Mark, K6FG
>>
>> -Original Message-
>> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-bounces@mailman
>> .qth.net]
>> On Behalf Of Paul F6EXV
>> Sent: Tuesday, June 20, 2017 7:30 AM
>> To: 'DX4WIN Reflector'
>> Subject: [Dx4win] JT65
>>
>> Hi all
>> I know DX4Win will not accept JT65-type reports (negative numbers) I
have
>> exported my QSO to an adif file, hoping to deal with the report
issue with
>> another logging program.
>> So I export myDX4Win log to adif.
>> I import to the other program which allows to me modify the
reports.
>> I export to an adif file.
>> I open BV7 and import that adif file (I want to use BV7 for my
labels) ..
>> no
>> QSO is imported.
>>
>> I am lost. Can someone help me to deal with this problem ?
>>
>> For info, if I try to export my general log which includes JT65 QSO,
they
>> are all imported no problem... EXCEPT the JT65 ones which disappear
!!
>>
>> 73
>> Paul F6EXV
>> __
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win

>> Help: http://mailman.qth.net/mmfaq.htm

>> Post: mailto:DX4WIN@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net

>> Please help support this email list: http://www.qsl.net/donate.html

>>
>>
>>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win

> Help: http://mailman.qth.net/mmfaq.htm

> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net

> Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html


!SIG:5949467b192451508113561!

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65

2017-06-20 Thread Jerry N9AW 
Hi All,
I guess this doesn't address Paul's issue directly but..  I use the
JT65 program by HB9HQX.  It has an internal logging function with an export
feature.  The export from HB9HQX comes into DX4WIN very cleanly.  While the
rstS and rstR are filled with 599  the Notes for this QSO field look like
this:
Import:{rstS=-04 rstR=-06}

I am fairly new to JT65 but the HB9HQX program is working solid for me.

73
Jerry N9AW


On Tue, Jun 20, 2017 at 9:30 AM, Paul F6EXV  wrote:

> Hi all
> I know DX4Win will not accept JT65-type reports (negative numbers)
> I have exported my QSO to an adif file, hoping to deal with the report
> issue with another logging program.
> So I export myDX4Win log to adif.
> I import to the other program which allows to me modify the reports.
> I export to an adif file.
> I open BV7 and import that adif file (I want to use BV7 for my labels)
> ... no QSO is imported.
>
> I am lost. Can someone help me to deal with this problem ?
>
> For info, if I try to export my general log which includes JT65 QSO, they
> are all imported no problem... EXCEPT the JT65 ones which disappear !!
>
> 73
> Paul F6EXV
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65

2017-06-20 Thread Bud Semon 
Paul,

Are you able to figure out what ADIF version that BV7 is using?  Perhaps it
is an older version that will not accept some data that your middle program
is putting in the ADIF file.

Also check that the program you use to modify the ADIF file is saving the
file with the .adi extension.  When I use Notepad to modify an ADIF file,
it will save the file as something like n7cw.adi.txt

Good luck.

73, Bud  N7CW

On Tue, Jun 20, 2017 at 8:02 AM, Paul F6EXV  wrote:

> Mark
> I can do that, but the label will not show the proper report.
> I cannot change it in BV7 as they will not be imported through adif
> conversion.
> 73
> Paul F6EXV
>
> Le 20/06/2017 à 17:00, Mark a écrit :
>
>> Hello Paul,
>>
>> In the "Notes for this QSO" field, I insert the report sent and the report
>> received.
>>
>> For example:
>>R -11   S -2
>>
>> Since WSJT-X keeps all of each QSO's information in a text file, the sent
>> and received reports are always available to retrieve.
>>
>> 73 & CU on JT-65A,
>>
>> Mark, K6FG
>>
>> -Original Message-
>> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-bounces@mailman
>> .qth.net]
>> On Behalf Of Paul F6EXV
>> Sent: Tuesday, June 20, 2017 7:30 AM
>> To: 'DX4WIN Reflector'
>> Subject: [Dx4win] JT65
>>
>> Hi all
>> I know DX4Win will not accept JT65-type reports (negative numbers) I have
>> exported my QSO to an adif file, hoping to deal with the report issue with
>> another logging program.
>> So I export myDX4Win log to adif.
>> I import to the other program which allows to me modify the reports.
>> I export to an adif file.
>> I open BV7 and import that adif file (I want to use BV7 for my labels) ..
>> no
>> QSO is imported.
>>
>> I am lost. Can someone help me to deal with this problem ?
>>
>> For info, if I try to export my general log which includes JT65 QSO, they
>> are all imported no problem... EXCEPT the JT65 ones which disappear !!
>>
>> 73
>> Paul F6EXV
>> __
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65

2017-06-20 Thread Mark via DX4WIN 
Hello Paul,

In the "Notes for this QSO" field, I insert the report sent and the report
received.

For example:
  R -11   S -2

Since WSJT-X keeps all of each QSO's information in a text file, the sent
and received reports are always available to retrieve.

73 & CU on JT-65A,

Mark, K6FG

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Paul F6EXV
Sent: Tuesday, June 20, 2017 7:30 AM
To: 'DX4WIN Reflector'
Subject: [Dx4win] JT65

Hi all
I know DX4Win will not accept JT65-type reports (negative numbers) I have
exported my QSO to an adif file, hoping to deal with the report issue with
another logging program.
So I export myDX4Win log to adif.
I import to the other program which allows to me modify the reports.
I export to an adif file.
I open BV7 and import that adif file (I want to use BV7 for my labels) .. no
QSO is imported.

I am lost. Can someone help me to deal with this problem ?

For info, if I try to export my general log which includes JT65 QSO, they
are all imported no problem... EXCEPT the JT65 ones which disappear !!

73
Paul F6EXV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65

2017-06-20 Thread Paul F6EXV 

Mark
I can do that, but the label will not show the proper report.
I cannot change it in BV7 as they will not be imported through adif 
conversion.

73
Paul F6EXV

Le 20/06/2017 à 17:00, Mark a écrit :

Hello Paul,

In the "Notes for this QSO" field, I insert the report sent and the report
received.

For example:
   R -11   S -2

Since WSJT-X keeps all of each QSO's information in a text file, the sent
and received reports are always available to retrieve.

73 & CU on JT-65A,

Mark, K6FG

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Paul F6EXV
Sent: Tuesday, June 20, 2017 7:30 AM
To: 'DX4WIN Reflector'
Subject: [Dx4win] JT65

Hi all
I know DX4Win will not accept JT65-type reports (negative numbers) I have
exported my QSO to an adif file, hoping to deal with the report issue with
another logging program.
So I export myDX4Win log to adif.
I import to the other program which allows to me modify the reports.
I export to an adif file.
I open BV7 and import that adif file (I want to use BV7 for my labels) .. no
QSO is imported.

I am lost. Can someone help me to deal with this problem ?

For info, if I try to export my general log which includes JT65 QSO, they
are all imported no problem... EXCEPT the JT65 ones which disappear !!

73
Paul F6EXV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 signal reports

2013-09-03 Thread Jim - N4ST 
John,
I use WSJTX and JT-Alertx when working JT65a and JT9-1.
There is a configuration option to write the mode and signal reports to the
comment field.
I am using a different logging program and this works fine with it and then
I can import into DX4WIN the info in the comment field.
You might see if it possible to write the ADIF file directly with the mode
and signal report in the comment field which could then be imported to
DX4WIN.
Never tried it , so don't know for sure.

73,
Jim - N4ST 

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of John Balsillie
Sent: Tuesday, September 03, 2013 16:17
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] JT65 signal reports

I see this has been discussed before by browsing the Archives but didn't
find a solution.
I'm running version 8.04 and maintaining a group log with imports from
various other logging programmes which include JT65 QSOS with negative
signal reports. However DX4Win wont accept a negative report and records a
default 599.  I need to be able to record a negative report in the correct
field for QSLing

Has there been a fix or upgrade I missed?

John ZL1ALZ


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 DX4WIN and LoTW

2012-09-02 Thread Jim Reisert AD1C 
On Sun, Sep 2, 2012 at 7:23 PM, David Ross dro...@sympatico.ca wrote:

 TQSL is mapped for JT65 = DATA.

Don't do that.  It caused the problem you saw.  LoTW is smart enough
that when you upload a JT65 QSO, it will credit it as DATA mode.

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html