Re: [NTG-context] split natural table over columns
Johan Sandblom wrote:
What is missing from the example that started the thread?
Nothing, but I think it would be a waste of time. Instead of a one
column table (of this size) I would use
\startitemize[n,columns,three] or simply change the orientation of the
table and use column spanning (columns.pdf).
In my eyes a one column table is the wrong approach to present such content.
Peter
Johan
2006/9/26, Peter Rolf [EMAIL PROTECTED]:
Hi Johan,
Johan Sandblom wrote:
Hi
But I don't understand why you want to split a table over columns. You
can reach this effect by using offsets (or empty columns if you use
backgrounds or frames), beside from the (in my eyes) strange look. And
how will you guarantee that a complete table line is horizontally
aligned inside of columns (and pages)? Sounds like overkill to me ;)
I don't understand how you mean with offsets or empty columns, do you
have an example? I wanted the functionality for a very narrow table in
a booklet where paper economy is a great concern. It does not matter
if it is horizontally aligned, a hole at the end (though ugly) might
still save an entire page for other useful information. Of course it
is overkill, but since every strange request on this list usually
leads to a pointer to functionality implemented several years back, I
figured it couldn't hurt to ask ...
Sorry, I have missed that your test table has only one column (really
narrow). So offset and empty column are pretty useless. :)
I thought there were 9 table columns, that should be split over the
three page columns.
So all depends on the exact size of your table. Can you make a minimal
example?
Greetings, Peter
Johan
Peter
For instance below I would like three cells in each column
\starttext
\startcolumns{3}
\placetable{}{
\bTABLE[split=repeat]
\dorecurse{9}{\bTR\bTD ha \eTD\eTR}
\eTABLE}
\stopcolumns
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] split natural table over columns
Good point, in the actual case there were two columns, a name and a
number. The reason for using the table is align the name to the left
and the number to the right. So a more realistic example is something
like
\starttext
\bTABLE
\setupTABLE[c][1][align=right]
\setupTABLE[c][2][align=left]
\dorecurse{10}{
\bTR\bTD foo\eTD\bTD 123\eTD\eTR
\bTR\bTD b \eTD\bTD 123456\eTD\eTR}
\eTABLE
\stoptext
Thank you for your interest.
Regards, Johan
2006/9/27, Peter Rolf [EMAIL PROTECTED]:
Johan Sandblom wrote:
What is missing from the example that started the thread?
Nothing, but I think it would be a waste of time. Instead of a one
column table (of this size) I would use
\startitemize[n,columns,three] or simply change the orientation of the
table and use column spanning (columns.pdf).
In my eyes a one column table is the wrong approach to present such content.
Peter
Johan
2006/9/26, Peter Rolf [EMAIL PROTECTED]:
Hi Johan,
Johan Sandblom wrote:
Hi
But I don't understand why you want to split a table over columns. You
can reach this effect by using offsets (or empty columns if you use
backgrounds or frames), beside from the (in my eyes) strange look. And
how will you guarantee that a complete table line is horizontally
aligned inside of columns (and pages)? Sounds like overkill to me ;)
I don't understand how you mean with offsets or empty columns, do you
have an example? I wanted the functionality for a very narrow table in
a booklet where paper economy is a great concern. It does not matter
if it is horizontally aligned, a hole at the end (though ugly) might
still save an entire page for other useful information. Of course it
is overkill, but since every strange request on this list usually
leads to a pointer to functionality implemented several years back, I
figured it couldn't hurt to ask ...
Sorry, I have missed that your test table has only one column (really
narrow). So offset and empty column are pretty useless. :)
I thought there were 9 table columns, that should be split over the
three page columns.
So all depends on the exact size of your table. Can you make a minimal
example?
Greetings, Peter
Johan
Peter
For instance below I would like three cells in each column
\starttext
\startcolumns{3}
\placetable{}{
\bTABLE[split=repeat]
\dorecurse{9}{\bTR\bTD ha \eTD\eTR}
\eTABLE}
\stopcolumns
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
--
Johan Sandblom N8, MRC, Karolinska sjh
t +46851776108 17176 Stockholm
m +46735521477 Sweden
What is wanted is not the will to believe, but the
will to find out, which is the exact opposite
- Bertrand Russell
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] split natural table over columns
Johan Sandblom wrote:
Good point, in the actual case there were two columns, a name and a
number. The reason for using the table is align the name to the left
and the number to the right. So a more realistic example is something
like
\starttext
\bTABLE
\setupTABLE[c][1][align=right]
\setupTABLE[c][2][align=left]
\dorecurse{10}{
\bTR\bTD foo\eTD\bTD 123\eTD\eTR
\bTR\bTD b \eTD\bTD 123456\eTD\eTR}
\eTABLE
\stoptext
So there is no need to split that table. I would suggest to only
rearrange it a bit for your column layout. Also TABLE is not the best
choise here (I'm no table expert, but I think table is better here).
%\SetTableToWidth\hsize
\starttable[|l|r|l|r|]
\dorecurse{10}{%
\VL foo \NC 123 \VL[2] b \NC 12345 \VL\AR}
\stoptable
For more details about table see
http://wiki.contextgarden.net/Table
HTH, Peter
Thank you for your interest.
Regards, Johan
2006/9/27, Peter Rolf [EMAIL PROTECTED]:
Johan Sandblom wrote:
What is missing from the example that started the thread?
Nothing, but I think it would be a waste of time. Instead of a one
column table (of this size) I would use
\startitemize[n,columns,three] or simply change the orientation of the
table and use column spanning (columns.pdf).
In my eyes a one column table is the wrong approach to present such content.
Peter
Johan
2006/9/26, Peter Rolf [EMAIL PROTECTED]:
Hi Johan,
Johan Sandblom wrote:
Hi
But I don't understand why you want to split a table over columns. You
can reach this effect by using offsets (or empty columns if you use
backgrounds or frames), beside from the (in my eyes) strange look. And
how will you guarantee that a complete table line is horizontally
aligned inside of columns (and pages)? Sounds like overkill to me ;)
I don't understand how you mean with offsets or empty columns, do you
have an example? I wanted the functionality for a very narrow table in
a booklet where paper economy is a great concern. It does not matter
if it is horizontally aligned, a hole at the end (though ugly) might
still save an entire page for other useful information. Of course it
is overkill, but since every strange request on this list usually
leads to a pointer to functionality implemented several years back, I
figured it couldn't hurt to ask ...
Sorry, I have missed that your test table has only one column (really
narrow). So offset and empty column are pretty useless. :)
I thought there were 9 table columns, that should be split over the
three page columns.
So all depends on the exact size of your table. Can you make a minimal
example?
Greetings, Peter
Johan
Peter
For instance below I would like three cells in each column
\starttext
\startcolumns{3}
\placetable{}{
\bTABLE[split=repeat]
\dorecurse{9}{\bTR\bTD ha \eTD\eTR}
\eTABLE}
\stopcolumns
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] split natural table over columns
Peter Rolf wrote:
Johan Sandblom wrote:
Good point, in the actual case there were two columns, a name and a
number. The reason for using the table is align the name to the left
and the number to the right. So a more realistic example is something
like
\starttext
\bTABLE
\setupTABLE[c][1][align=right]
\setupTABLE[c][2][align=left]
\dorecurse{10}{
\bTR\bTD foo\eTD\bTD 123\eTD\eTR
\bTR\bTD b \eTD\bTD 123456\eTD\eTR}
\eTABLE
\stoptext
So there is no need to split that table. I would suggest to only
rearrange it a bit for your column layout. Also TABLE is not the best
choise here (I'm no table expert, but I think table is better here).
%\SetTableToWidth\hsize
\starttable[|l|r|l|r|]
\HL
\dorecurse{10}{%
\VL foo \NC 123 \VL[2] b \NC 12345 \VL\AR}
\HL
\stoptable
For more details about table see
http://wiki.contextgarden.net/Table
HTH, Peter
I missed the horizontal ones :D
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] split natural table over columns
Johan Sandblom wrote:
Is it possible to make a natural table split over columns or columnsets?
For instance below I would like three cells in each column
\starttext
\startcolumns{3}
\placetable{}{
\bTABLE[split=repeat]
\dorecurse{9}{\bTR\bTD ha \eTD\eTR}
\eTABLE}
\stopcolumns
\stoptext
pretty complex: balancing and afterwards splitting graphics and such;
beyond my current ambitions
--
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] split natural table over columns
Hi Johan,
Johan Sandblom wrote:
Is it possible to make a natural table split over columns or columnsets?
see
http://wiki.contextgarden.net/Tables_Overview
what is possible and what is not. Currently only *linetable* is
supporting horizontal splitting. The syntax looks similar to TABLE, but
I don't know the details (never used it). Anyhow worth a try...
http://wiki.contextgarden.net/Linetable
But I don't understand why you want to split a table over columns. You
can reach this effect by using offsets (or empty columns if you use
backgrounds or frames), beside from the (in my eyes) strange look. And
how will you guarantee that a complete table line is horizontally
aligned inside of columns (and pages)? Sounds like overkill to me ;)
Peter
For instance below I would like three cells in each column
\starttext
\startcolumns{3}
\placetable{}{
\bTABLE[split=repeat]
\dorecurse{9}{\bTR\bTD ha \eTD\eTR}
\eTABLE}
\stopcolumns
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] split natural table over columns
Hi
But I don't understand why you want to split a table over columns. You
can reach this effect by using offsets (or empty columns if you use
backgrounds or frames), beside from the (in my eyes) strange look. And
how will you guarantee that a complete table line is horizontally
aligned inside of columns (and pages)? Sounds like overkill to me ;)
I don't understand how you mean with offsets or empty columns, do you
have an example? I wanted the functionality for a very narrow table in
a booklet where paper economy is a great concern. It does not matter
if it is horizontally aligned, a hole at the end (though ugly) might
still save an entire page for other useful information. Of course it
is overkill, but since every strange request on this list usually
leads to a pointer to functionality implemented several years back, I
figured it couldn't hurt to ask ...
Johan
Peter
For instance below I would like three cells in each column
\starttext
\startcolumns{3}
\placetable{}{
\bTABLE[split=repeat]
\dorecurse{9}{\bTR\bTD ha \eTD\eTR}
\eTABLE}
\stopcolumns
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
--
Johan Sandblom N8, MRC, Karolinska sjh
t +46851776108 17176 Stockholm
m +46735521477 Sweden
What is wanted is not the will to believe, but the
will to find out, which is the exact opposite
- Bertrand Russell
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] split natural table over columns
Hi Johan,
Johan Sandblom wrote:
Hi
But I don't understand why you want to split a table over columns. You
can reach this effect by using offsets (or empty columns if you use
backgrounds or frames), beside from the (in my eyes) strange look. And
how will you guarantee that a complete table line is horizontally
aligned inside of columns (and pages)? Sounds like overkill to me ;)
I don't understand how you mean with offsets or empty columns, do you
have an example? I wanted the functionality for a very narrow table in
a booklet where paper economy is a great concern. It does not matter
if it is horizontally aligned, a hole at the end (though ugly) might
still save an entire page for other useful information. Of course it
is overkill, but since every strange request on this list usually
leads to a pointer to functionality implemented several years back, I
figured it couldn't hurt to ask ...
Sorry, I have missed that your test table has only one column (really
narrow). So offset and empty column are pretty useless. :)
I thought there were 9 table columns, that should be split over the
three page columns.
So all depends on the exact size of your table. Can you make a minimal
example?
Greetings, Peter
Johan
Peter
For instance below I would like three cells in each column
\starttext
\startcolumns{3}
\placetable{}{
\bTABLE[split=repeat]
\dorecurse{9}{\bTR\bTD ha \eTD\eTR}
\eTABLE}
\stopcolumns
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
