Re: [Unattended] Question
You need to make an new install from the dell disks that shipped with the 7010 the motherboard/devices are different enough that the original install doesn't work with it. I had different models grab different boot devices based on mac address filtering. Good luck, Ben On Apr 24, 2013, at 3:01 PM, Brandon Aho wrote: We have been using the unattended process and it’s been working great. My question is now we have had to changed hardware models to the dell 7010 and now the following is happening when pxe booting. Our Dell 790’s work great but the new ones not so much. Unable to determine boot device at usr/bin/find-boot-device line 212 *** find-boot-device failed *** dropping to shell Bash-4.1# Any help would be great. image001.png Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. -- Try New Relic Now We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info -- Try New Relic Now We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question
We have been using the unattended process and it's been working great. My question is now we have had to changed hardware models to the dell 7010 and now the following is happening when pxe booting. Our Dell 790's work great but the new ones not so much. Unable to determine boot device at usr/bin/find-boot-device line 212 *** find-boot-device failed *** dropping to shell Bash-4.1# Any help would be great. [Description: NTELogo] Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. inline: image001.png-- Try New Relic Now We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question
It's kinda old, but this web page has some details about how to do that. I haven't needed to edit the initrd in several years myself. http://sourceforge.net/apps/trac/unattended/wiki/ModifyingTheBootDisk Brandon Aho brandon@northerntool.com 06/22/2012 08:49 AM Please respond to All things concerning http://unattended.sourceforge.net/; unattended-info@lists.sourceforge.net To unattended-info@lists.sourceforge.net unattended-info@lists.sourceforge.net, unattended-de...@lists.sourceforge.net unattended-de...@lists.sourceforge.net cc Subject [Unattended] Question Does anyone have instructions on how to rebuild the initrd file? I need to update the drivers for the Broadcom and of course don’t know all that is required to recompile that file so I can get my PXE to boot for the newer style servers. What tools are required to update it as well. Thanks Brandon Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. https://console.mxlogic.com/redir/?5BN5NxcQsECSn4n6nTD3o0brmY_lRunMhQNB7oMfKMCMDt5f4kmcvKyCCCUPxK_8I9LfzAm4PhOrKrrxIV_13Q2YEeRbAaJMJZ0kvaAWtiHsruW01_wqrohhK-rhpoKOejd78VMSCyrdbojxIV_13Q3iWq807r-AVlwrDUvf5zZB0SyrhdIzDT4TTC3usLWSFP9fVWs ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://console.mxlogic.com/redir/?2OUyUMCqekjrbybzbXPxIDeqR4IM-l9QWBmUSZQ03_0T3VkDj3VkDa3JsrxIV_13Q2YEeRdTV5xdVYsyMCqejtPrsdDfU8uwnB1SFsxlK5LE2zVkDjGlrzrTg0fY3jr2adTPqbb5ShOpEV7e6QQjpFr2sdDfU8uwqnjh00XvQDaI3s_3VUIvIE6Qjq9JAs-UC-YMr4ndmYH7- NOTICE: The information contained in this electronic message, and any attachments accompanying this transmission, may be legally privileged and/or confidential and protected health information. This information is intended only for the use of the individual(s) and/or entity identified above. The authorized recipient of this information is prohibited from disclosing this information to any other party unless required to do so by law or regulation and is required to protect the information after its stated need has been fulfilled. If you are not the intended recipient, or an employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any disclosure, printing, copying, forwarding, or distributing of this information is strictly prohibited. If you have received this communication in error, please notify the sender immediately, by telephone or return fax/email, to advise of wrongful receipt and confirm your understanding of this Notice. Thank You. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question
El 22/06/12 21:57, Brandon Aho escribió: Okay I read through the following and could do it but the only issue I have is I don’t have debian or fedora box mine would be Ubuntu. Brandon, There are 2 methods to fix your issue. One is to build using debian/ubuntu and the other on is to add those drivers without building it. Just check the page and let us know if that works for you. https://sourceforge.net/apps/trac/unattended/wiki/ModifyingTheBootDisk I am testing right now to build using 3.4.4 and applying some patches from Slava Pechenin so I am curious if that works for you as well... -- Si no disfrutas la libertad interior, ¿qué otra libertad esperas gozar? -- Arturo Graff. (1848-1913) Escritor italiano. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question
Does anyone have instructions on how to rebuild the initrd file? I need to update the drivers for the Broadcom and of course don't know all that is required to recompile that file so I can get my PXE to boot for the newer style servers. What tools are required to update it as well. Thanks Brandon [Description: NTELogo] Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. inline: image001.png-- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question
you should ask this question on the list for the os you are using they would have the best answer. Sounds like your making progress. keep on plugging. Ben On Jun 22, 2012, at 9:48 AM, Brandon Aho wrote: Does anyone have instructions on how to rebuild the initrd file? I need to update the drivers for the Broadcom and of course don’t know all that is required to recompile that file so I can get my PXE to boot for the newer style servers. What tools are required to update it as well. Thanks Brandon image001.png Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question
Thanks for the help. I will see what I can do. It's too bad it still not being actively developed on it's a great tool. I have it working well for the desktops and my older servers it just the newer ones that have the updated nic cards that seem to have the issue. Thanks for the help, Brandon [Description: NTELogo] Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell From: Ben Greenfield [mailto:b...@cogs.com] Sent: Friday, June 22, 2012 9:28 AM To: All things concerning http://unattended.sourceforge.net/ Subject: Re: [Unattended] Question I didn't actually use the linux distribution I just used netbsd because that is what I like. Figure out the linux distribution and version and ask I'm sure someone will help you. This google search yielded some answers and if the distribution was added it would probably work. linux rebuild initrd add network driver - Google Searchhttp://www.google.com/search?client=safarirls=enq=linux+rebuild+initrd+add+network+driverie=UTF-8oe=UTF-8 Unfortunately for you I seem to be the only left on this list and I have no idea. Good Luck, Ben On Jun 22, 2012, at 10:15 AM, Brandon Aho wrote: This would be the initrd file that is included with the unattended linux boot files for the unattend install. I would like to make sure that everything stays the same as that distribution with the exception of the updated nic drivers. image001.png Brandon Aho Retail Systems Manager brandon@northerntool.commailto:brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell From: Ben Greenfield [mailto:b...@cogs.com] Sent: Friday, June 22, 2012 9:13 AM To: All things concerning http://unattended.sourceforge.net/ Subject: Re: [Unattended] Question you should ask this question on the list for the os you are using they would have the best answer. Sounds like your making progress. keep on plugging. Ben On Jun 22, 2012, at 9:48 AM, Brandon Aho wrote: Does anyone have instructions on how to rebuild the initrd file? I need to update the drivers for the Broadcom and of course don't know all that is required to recompile that file so I can get my PXE to boot for the newer style servers. What tools are required to update it as well. Thanks Brandon image001.png Brandon Aho Retail Systems Manager brandon@northerntool.commailto:brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.netmailto:unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.netmailto:unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info inline: image001.png-- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question
I haven't used it in 5 years at least. It was such a great tool that I don't want to leave the list:) On Jun 22, 2012, at 10:31 AM, Brandon Aho wrote: Thanks for the help. I will see what I can do. It’s too bad it still not being actively developed on it’s a great tool. I have it working well for the desktops and my older servers it just the newer ones that have the updated nic cards that seem to have the issue. It really is a collection of scripts. I used a netbsd server instead of the linux server. As far as the image you are currently struggling with I believe you could swap out pxe boot image. Have fun, Ben Thanks for the help, Brandon image001.png Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell From: Ben Greenfield [mailto:b...@cogs.com] Sent: Friday, June 22, 2012 9:28 AM To: All things concerning http://unattended.sourceforge.net/ Subject: Re: [Unattended] Question I didn't actually use the linux distribution I just used netbsd because that is what I like. Figure out the linux distribution and version and ask I'm sure someone will help you. This google search yielded some answers and if the distribution was added it would probably work. linux rebuild initrd add network driver - Google Search Unfortunately for you I seem to be the only left on this list and I have no idea. Good Luck, Ben On Jun 22, 2012, at 10:15 AM, Brandon Aho wrote: This would be the initrd file that is included with the unattended linux boot files for the unattend install. I would like to make sure that everything stays the same as that distribution with the exception of the updated nic drivers. image001.png Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell From: Ben Greenfield [mailto:b...@cogs.com] Sent: Friday, June 22, 2012 9:13 AM To: All things concerning http://unattended.sourceforge.net/ Subject: Re: [Unattended] Question you should ask this question on the list for the os you are using they would have the best answer. Sounds like your making progress. keep on plugging. Ben On Jun 22, 2012, at 9:48 AM, Brandon Aho wrote: Does anyone have instructions on how to rebuild the initrd file? I need to update the drivers for the Broadcom and of course don’t know all that is required to recompile that file so I can get my PXE to boot for the newer style servers. What tools are required to update it as well. Thanks Brandon image001.png Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists
Re: [Unattended] Question
It's kinda old, but this web page has some details about how to do that. I haven't needed to edit the initrd in several years myself. http://sourceforge.net/apps/trac/unattended/wiki/ModifyingTheBootDisk Brandon Aho brandon@northerntool.com 06/22/2012 08:49 AM Please respond to All things concerning http://unattended.sourceforge.net/; unattended-info@lists.sourceforge.net To unattended-info@lists.sourceforge.net unattended-info@lists.sourceforge.net, unattended-de...@lists.sourceforge.net unattended-de...@lists.sourceforge.net cc Subject [Unattended] Question Does anyone have instructions on how to rebuild the initrd file? I need to update the drivers for the Broadcom and of course don’t know all that is required to recompile that file so I can get my PXE to boot for the newer style servers. What tools are required to update it as well. Thanks Brandon Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. https://console.mxlogic.com/redir/?5BN5NxcQsECSn4n6nTD3o0brmY_lRunMhQNB7oMfKMCMDt5f4kmcvKyCCCUPxK_8I9LfzAm4PhOrKrrxIV_13Q2YEeRbAaJMJZ0kvaAWtiHsruW01_wqrohhK-rhpoKOejd78VMSCyrdbojxIV_13Q3iWq807r-AVlwrDUvf5zZB0SyrhdIzDT4TTC3usLWSFP9fVWs ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://console.mxlogic.com/redir/?2OUyUMCqekjrbybzbXPxIDeqR4IM-l9QWBmUSZQ03_0T3VkDj3VkDa3JsrxIV_13Q2YEeRdTV5xdVYsyMCqejtPrsdDfU8uwnB1SFsxlK5LE2zVkDjGlrzrTg0fY3jr2adTPqbb5ShOpEV7e6QQjpFr2sdDfU8uwqnjh00XvQDaI3s_3VUIvIE6Qjq9JAs-UC-YMr4ndmYH7- NOTICE: The information contained in this electronic message, and any attachments accompanying this transmission, may be legally privileged and/or confidential and protected health information. This information is intended only for the use of the individual(s) and/or entity identified above. The authorized recipient of this information is prohibited from disclosing this information to any other party unless required to do so by law or regulation and is required to protect the information after its stated need has been fulfilled. If you are not the intended recipient, or an employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any disclosure, printing, copying, forwarding, or distributing of this information is strictly prohibited. If you have received this communication in error, please notify the sender immediately, by telephone or return fax/email, to advise of wrongful receipt and confirm your understanding of this Notice. Thank You. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question
El 22/06/12 16:31, Brandon Aho escribió: It’s too bad it still not being actively developed on it’s a great tool. I have it working well for the desktops and my older servers it just the newer ones that have the updated nic cards that seem to have the issue. Brandon,*Ben Every week there is update on the project. Mainly on the scripts. https://sourceforge.net/apps/trac/unattended/timeline are you using latest version (4.9)? * -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question
I am using 4.9. But it doesn't have the latest Broadcom BCM5709C NetXtremeII GigE driver in it as part of the Linux boot. Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell -Original Message- From: Juanjo Pablos [mailto:jua...@apertus.es] Sent: Friday, June 22, 2012 1:07 PM To: All things concerning http://unattended.sourceforge.net/ Subject: Re: [Unattended] Question El 22/06/12 16:31, Brandon Aho escribió: It's too bad it still not being actively developed on it's a great tool. I have it working well for the desktops and my older servers it just the newer ones that have the updated nic cards that seem to have the issue. Brandon,*Ben Every week there is update on the project. Mainly on the scripts. https://sourceforge.net/apps/trac/unattended/timeline are you using latest version (4.9)? * -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question
I think you should at least give it a try. Ubuntu is based on debian, so I would guess that the kernel modules would be the same. Brandon Aho brandon@northerntool.com 06/22/2012 02:58 PM Please respond to All things concerning http://unattended.sourceforge.net/; unattended-info@lists.sourceforge.net To unattended-info@lists.sourceforge.net unattended-info@lists.sourceforge.net cc unattended-de...@lists.sourceforge.net unattended-de...@lists.sourceforge.net Subject Re: [Unattended] Question Okay I read through the following and could do it but the only issue I have is I don’t have debian or fedora box mine would be Ubuntu. Is there anyone that could rebuild this for me and include the latest Broadcom 5709C netXtreme II GigE network drivers? Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell From: matt_fr...@simplifieso.com [mailto:matt_fr...@simplifieso.com] Sent: Friday, June 22, 2012 9:49 AM To: All things concerning http://unattended.sourceforge.net/ Cc: unattended-de...@lists.sourceforge.net Subject: Re: [Unattended] Question It's kinda old, but this web page has some details about how to do that. I haven't needed to edit the initrd in several years myself. http://sourceforge.net/apps/trac/unattended/wiki/ModifyingTheBootDisk Brandon Aho brandon@northerntool.com 06/22/2012 08:49 AM Please respond to All things concerning http://unattended.sourceforge.net/; unattended-info@lists.sourceforge.net To unattended-info@lists.sourceforge.net unattended-info@lists.sourceforge.net, unattended-de...@lists.sourceforge.net unattended-de...@lists.sourceforge.net cc Subject [Unattended] Question Does anyone have instructions on how to rebuild the initrd file? I need to update the drivers for the Broadcom and of course don’t know all that is required to recompile that file so I can get my PXE to boot for the newer style servers. What tools are required to update it as well. Thanks Brandon Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. https://console.mxlogic.com/redir/?5BN5NxcQsECSn4n6nTD3o0brmY_lRunMhQNB7oMfKMCMDt5f4kmcvKyCCCUPxK_8I9LfzAm4PhOrKrrxIV_13Q2YEeRbAaJMJZ0kvaAWtiHsruW01_wqrohhK-rhpoKOejd78VMSCyrdbojxIV_13Q3iWq807r-AVlwrDUvf5zZB0SyrhdIzDT4TTC3usLWSFP9fVWs___ unattended-info mailing list unattended-info@lists.sourceforge.net https://console.mxlogic.com/redir/?2OUyUMCqekjrbybzbXPxIDeqR4IM-l9QWBmUSZQ03_0T3VkDj3VkDa3JsrxIV_13Q2YEeRdTV5xdVYsyMCqejtPrsdDfU8uwnB1SFsxlK5LE2zVkDjGlrzrTg0fY3jr2adTPqbb5ShOpEV7e6QQjpFr2sdDfU8uwqnjh00XvQDaI3s_3VUIvIE6Qjq9JAs-UC-YMr4ndmYH7- NOTICE: The information contained in this electronic message, and any attachments accompanying this transmission, may be legally privileged and/or confidential and protected health information. This information is intended only for the use of the individual(s) and/or entity identified above. The authorized recipient of this information is prohibited from disclosing this information to any other party unless required to do so by law or regulation and is required to protect the information after its stated need has been fulfilled. If you are not the intended recipient, or an employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any disclosure, printing, copying, forwarding, or distributing of this information is strictly prohibited. If you have received this communication in error, please notify the sender immediately, by telephone or return fax/email, to advise of wrongful receipt and confirm your understanding of this Notice. Thank You. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. https://console.mxlogic.com/redir
Re: [Unattended] Question
i thought you could change this using a config.pl file placed in the site subfolder see e.g. http://unattended.sourceforge.net/dynamic.php Michael De Groote On Thu, Apr 12, 2012 at 11:17 AM, FIRSOVS Jegors jegors.firs...@transcom.com wrote: Hello, guys! THanks you for this service - it is really amazing! One thing, that bother me for a year ... Where can I change the embedded administrator credentials (The default ones are Administrator/password), But I can't seem to find them in any file... I just want to change the default Administrators login to some other... that is it =) Thanks Best regards, Jegors Firsovs ** IT administrator ***Transcom*** Vienibas gatve 109 Riga, LV-1058, Latvia Mobile: +371 29569900 Fixed : +371 67060577 e-mail: jegors.firs...@transcom.com www.transcom.com -- For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question
Hello, guys! THanks you for this service - it is really amazing! One thing, that bother me for a year ... Where can I change the embedded administrator credentials (The default ones are Administrator/password), But I can't seem to find them in any file... I just want to change the default Administrators login to some other... that is it =) Thanks Best regards, Jegors Firsovs IT administrator Transcom Vienibas gatve 109 Riga, LV-1058, Latvia Mobile: +371 29569900 Fixed : +371 67060577 e-mail: jegors.firs...@transcom.commailto:jegors.firs...@transcom.com www.transcom.comhttp://www.transcom.com/ -- For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question
Is there a way out of the box to create an unattended.txt for multiple OS and the system identify which one to use or do I have to make coding changes to reflect which one goes where? Thanks Brandon [Description: NTELogo] Brandon Aho Retail Systems Manager brandon@northerntool.com 952-808-6685 Desk 952-992-0502 Cell Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. inline: image001.png-- For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Unattended question...
El 11/03/11 18:52, Andrew Pike escribió: Hi, Does unattended support the installation of Windows Vista, Windows 7 or Windows Server 2008? I'm guessing that it does not because I can't find it on your website - I'm just checking the website is not out-of-date. Andy, Some user had reported using appsonly: https://sourceforge.net/apps/trac/unattended/wiki/appsonly follow this ticket: https://sourceforge.net/apps/trac/unattended/ticket/3 -- Colocation vs. Managed Hosting A question and answer guide to determining the best fit for your organization - today and in the future. http://p.sf.net/sfu/internap-sfd2d ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Unattended question...
Hi, Does unattended support the installation of Windows Vista, Windows 7 or Windows Server 2008? I'm guessing that it does not because I can't find it on your website - I'm just checking the website is not out-of-date. Thanks for your help, Andy -- Colocation vs. Managed Hosting A question and answer guide to determining the best fit for your organization - today and in the future. http://p.sf.net/sfu/internap-sfd2d ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Unattended - Question (Vista/Server 2008)
Can I use this program to deply Vista and Server 2008 or only XP and lower? Regards, Chris - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question
Is it possible to install vista with unattended? If not do you know of any free programs out there that will? -- Ryan - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question regarding license
Hi back, -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von [EMAIL PROTECTED] Gesendet: Dienstag, 3. Juni 2008 00:37 An: unattended-info@lists.sourceforge.net Betreff: [Unattended] Question regarding license Hi there, I just have a question regarding the license of Unattended. We are currently developing an application which allows us to perform installations for Linux/BSD and Windows over a network, using PXE. This is being coupled with a web-based interface, as well as XML features to automate all of this. Initially this will only be used in-house. If everything works well, we are considering to sell this as a commercial product. Now the thing is that we are planning to use Unattended for the installations of Windows servers. Now my question is; is it permitted to distribute our commercial application with Unattended integrated into it? AFAIK: You're allowed to distribute it with/as an commercial product. BUT you have to open your sources for everyone who's interested. That means, that you could more or less sell your support, not the software itself. Linksys also _had_ to open their linux-sources because they're using Linux on their routers. Thank you. Andre For more infos, follow Juan's Link to gpl. Regards - Christof -- --- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question regarding license
[EMAIL PROTECTED] escribió: Initially this will only be used in-house. If everything works well, we are considering to sell this as a commercial product. Now the thing is that we are planning to use Unattended for the installations of Windows servers. Be aware that Windows server 2003 updates have not been revised to latest security update. Now my question is; is it permitted to distribute our commercial application with Unattended integrated into it? I am not a lawyer, check the licence here: http://www.gnu.org/licenses/old-licenses/gpl-2.0.html - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question regarding license
Hi there, I just have a question regarding the license of Unattended. We are currently developing an application which allows us to perform installations for Linux/BSD and Windows over a network, using PXE. This is being coupled with a web-based interface, as well as XML features to automate all of this. Initially this will only be used in-house. If everything works well, we are considering to sell this as a commercial product. Now the thing is that we are planning to use Unattended for the installations of Windows servers. Now my question is; is it permitted to distribute our commercial application with Unattended integrated into it? Thank you. Andre - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question to unattended
*Von:* Lennard Toll [EMAIL PROTECTED] *Gesendet:* 11.03.08 10:40:41 *An:* [EMAIL PROTECTED] *Betreff:* Question to unattended Hi, ich have Download your unattended script. And i have a problem with your script ich have download active perl for using the .pl datas but i dont work! Want must i do?? And the next problem is when is start the install.pl in the dosbin folter the dos window show me a error message, he sad there are two errors! One in line31 an the other one in line 33 it were whery nice when you can help me. good bye Lennard Toll ps: here the link to the picture from the error screen! http://250kb.de/u/080311/j/435e226a.jpg [http://250kb.de/u/080311/j/435e226a.jpg] Unbegrenzter Speicherplatz für Ihr E-Mail Postfach? Jetzt aktivieren! *http://freemail.web.de/club/landingpage.htm/?mc=02* [http://freemail.web.de/club/landingpage.htm/?mc=02] - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question to unattended
Hmm I don't understand where the question is? What are you trying to do? Execute the install.pl? What's your environment you're using unattended in? Sebastian _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lennard Toll Sent: Tuesday, March 11, 2008 10:45 AM To: unattended-info@lists.sourceforge.net Subject: [Unattended] Question to unattended Importance: High _ Von: Lennard Toll Gesendet: 11.03.08 10:40:41 An: [EMAIL PROTECTED] Betreff: Question to unattended Hi, ich have Download your unattended script. And i have a problem with your script ich have download active perl for using the .pl datas but i dont work! Want must i do?? And the next problem is when is start the install.pl in the dosbin folter the dos window show me a error message, he sad there are two errors! One in line31 an the other one in line 33 it were whery nice when you can help me. good bye L ennard Toll ps: here the link to the picture from the error screen! HYPERLINK http://250kb.de/u/080311/j/435e226a.jpghttp://250kb.de/u/080311/j/435e226a .jpg HYPERLINK https://img.web.de/p.gif; Unbegrenzter Speicherplatz für Ihr E-Mail Postfach? Jetzt aktivieren! HYPERLINK http://freemail.web.de/club/landingpage.htm/?mc=02http://freemail.web. de/club/landingpage.htm/?mc=02 No virus found in this incoming message. Checked by AVG. Version: 7.5.518 / Virus Database: 269.21.7/1324 - Release Date: 10.03.2008 19:27 No virus found in this outgoing message. Checked by AVG. Version: 7.5.518 / Virus Database: 269.21.7/1324 - Release Date: 10.03.2008 19:27 - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] question about unattended on Optiplex 755
David Bynum escribió: I'm having a problem with unattended on Dell's new Optiplex 755 model. It drops to shell while trying to find eth0, eth1, or eth2. The network card is: Broadcom 5721C1 NetXtreme Gigabit Ethernet PCI-E Driver find out if this is supported by the linux kernel first. If not then you need to compile your own kernel with the ones from broadcom. find out the pci id for that card: lspci -n | grep 14e4 - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] question about unattended on Optiplex 755
The unattend-gui works well with the Optiplex 755. HTH, Kaari Juan Jose Pablos schrieb: David Bynum escribió: I'm having a problem with unattended on Dell's new Optiplex 755 model. It drops to shell while trying to find eth0, eth1, or eth2. The network card is: Broadcom 5721C1 NetXtreme Gigabit Ethernet PCI-E Driver find out if this is supported by the linux kernel first. If not then you need to compile your own kernel with the ones from broadcom. find out the pci id for that card: lspci -n | grep 14e4 - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question about partitioning with 4.7
Hi, so far I've been happy with having just one partition on my drive but now customers are bugging me if it is somewho possible to create two partions of the same size on one drive. For example on a 120GB drive there should be C: with 60GB and D: with 60GB. Of course I could just use fixed values but since not all machines have harddisks of the same size (replaced with a different, bigger one because the old one was broken/a whole other type of computer with smaller drives/..) I was wondering if it was somehow possible to use percentages (50%|50% (or any other combination)) in fdisk_cmds. Any ideas or even better: working examples? ;) Thanks in advance, - jens - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question about the Boot Disks
I am brand new to this, and I realize that netbooting has been done for decades (Solaris at least). I am trying to build a Linux (Ubuntu) box that can house a few boot images and configure the machines after a fresh install. I want to have this all done over a network, using the PXE boot option. I have 23089743 questions, but I would like to start with the obvious first and then move into the more mundane. 1) Where / How do I build a Windows XP boot image? Is it just a bootable ISO image? If so, do I place an 'unattend.cfg' file in there too so it answers all the groovy install questions? 2) Are there actions available after the last boot to trigger variances in the installation, like IP addressing, hostname, etc. or would I need a different 'image' for each variant? That should get me really scratching my head. Thanks in Advance, Patrick - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question about NSIS
Hi there, William Cheng schrieb: For software using NSIS as installer, we can use the /S to switch it to silent mode, however it seems that it will return before the installation finish. Is there any switch to solve this problem. start /wait nsisinstaller.exe (without quotes) should do the trick. How about override the default langauge? Or if it auto detect the system langauge but I don't want to use the system language, is it possible to override it silently? Yes, but you have to parse that argument manually. See GetOptions (http://nsis.sourceforge.net/Docs/AppendixE.html#E.1.12). HTH Greetings Alexander Stein PS: Please stop posting HTML mails. Thanks! - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question about NSIS
Hi,On 11/13/06, Alexander Stein [EMAIL PROTECTED] wrote: Hi there,William Cheng schrieb: For software using NSIS as installer, we can use the /S to switch it to silent mode, however it seems thatit will return before the installation finish. Is there any switch to solve this problem.start /wait nsisinstaller.exe (without quotes) should do the trick. Thanks, it works How about override the default langauge? Or if it auto detect the system langauge but I don't want to use the system language, is it possible to override it silently?Yes, but you have to parse that argument manually. See GetOptions( http://nsis.sourceforge.net/Docs/AppendixE.html#E.1.12).Do you mean I need to modify the installer? (Modify the script and compile the installer again?) HTHGreetingsAlexander SteinPS: Please stop posting HTML mails. Thanks!HTML mail? Do you mean those spam on the list or I have done some silly thing in my mail which is related HTML? I don't I have any HTML tag in my mail. ThanksWilliam - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question about NSIS
Dear all, For software using NSIS as installer, we can use the /S to switch it to silent mode, however it seems that it will return before the installation finish. Is there any switch to solve this problem. How about override the default langauge? Or if it auto detect the system langauge but I don't want to use the system language, is it possible to override it silently?William - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] question is joining domain
Hello William, I encounter this problem if the password on the account responsible for joining the computer to the domain exceeds 12 (?) characters. Windows 2000 imposes a limit here, whereas Windows XP doesn't have such a limit. Best regards, Kaari William Cheng schrieb: Dear all, I have my unattended server and the config.pl set up and working fine in join a windows 2000 domain. However, recently we set up a new windows 2003 domain, I changed the config.pl with new identification information. If I install a machine with windows XP sp2, everything things still working fine. Problem occurs, when installing machine with windows 2000 sp4, after the installation the machine still in workgroup . Any one have idea what's going on? Thx William - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question about partitioning
To me it's clear that I#m able to edit the [_meta] section in unattended.txt. But I want to have the choice during installation, such as the choice of OS, driver, what to do, etc. (without editing the [_meta] section) I'm using the unattended 4.6 on a linux machine. As I could remember on the 4.4 the was a choice for the partitioning. Is it possible to include this in 4.6? Greets Oliver [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 08.08.2006 04:28 To: [EMAIL PROTECTED] cc: unattended-info@lists.sourceforge.net Subject: Re: [Unattended] Question about partitioning [EMAIL PROTECTED] wrote: is it possible to choose how the harddisk was partitioned? Greets Oliver Yep, look in the [_meta] section at fdisk_cmds = ... - you can alter that to your heart's content. Cheers, Greg. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question about partitioning
Hello, is it possible to choose how the harddisk was partitioned? Greets Oliver- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
RE: [Unattended] Question to the OemPnPDriversPath
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christian Cronen Sent: Friday, March 24, 2006 1:20 AM To: unattended-info@lists.sourceforge.net Subject: [Unattended] Question to the OemPnPDriversPath hi, i have a great idea to slim the OS directorys, but i don't know how to do this. I have in every from my four diverent OS a folder for driver. In every folder are the same files. In the WINNT.SIF i set the Option OemPnPDriversPath to that folder. Now i think, it is possible, to set the path to the drivers folder on a networkpath ? like \\ntinstall\install\drivers or something like that ? did any one tested it ? or have any one information about that ? Christian, The way that I did it was to install NTFS Link (http://www.elsdoerfer.info/ntfslink/) on the Windows box that was providing the unattended share, and create a junction to an $OEM$ folder stored elsewhere in the folder tree. This meant that I had one $OEM$ folder to keep updated, and all the install points were updated. It also avoids having to mess around with Windows files, so that if a SP update changed the file... Under *nix, you can do this by creating hard links (ln target source) instead of symbolic links, and all should be fine. HTH Jerome Brown --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question to the OemPnPDriversPath
hi, i have a great idea to slim the OS directorys, but i don't know how to do this. I have in every from my four diverent OS a folder for driver. In every folder are the same files. In the WINNT.SIF i set the Option OemPnPDriversPath to that folder. Now i think, it is possible, to set the path to the drivers folder on a networkpath ? like \\ntinstall\install\drivers or something like that ? did any one tested it ? or have any one information about that ? Best regards Christian -- _ Name: Christian Cronen Company: Noffz ComputerTechnik GmbH Address: Tempelsweg 24A D-47918 Toenisvorst Germany Phone:+49-2151-99878-22 Fax: +49-2151-99878-88 e-mail: [EMAIL PROTECTED] Internet: www.noffz.com _ --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question
Hey there! I like th concept of your program... I think it's great. However, I have one minor question... Is there any Live CD distribution that has your program on it? I would think that there would be a great use for a live-cd that would pretty much do everything for you, and all you would have to do is prepare the windows intstall. Does something like that exist... Or would that be something that a community project would be interasted in? -Thanks!-- -Rick ConleeA+, MCP+i Certified Computer Specialist / Network Engineer
[Unattended] Question...
I can get the network pxe boot to go, but then I get an error saying cannot find z/linuxaux. I have gone over the docs, but cannot find reference to this folder. Mark Cooperider Field Engineer Nexus IS, Inc. 9130 SW Pioneer Court Suite E Wilsonville, OR 97070 Office: 800.221.2281 Fax: 503.218.4001 [EMAIL PROTECTED] www.nexusis.com The information contained in this email and any additional attachments is confidential and may be legally privileged. If you are not the intended recipient then you must not use, disseminate, distribute or copy any information contained in this email or any attachments. If you receive this email in error, please destroyit immediately and contact us .Thank you.
Re: [Unattended] question about freedos bootdisk image
On Mon, 26 Sep 2005, [EMAIL PROTECTED] wrote: That's a clever idea. However, if Thomas is using the DOS boot disks, then he would need to boot twice. Once to fdisk, and once to install. Do you suppose it would be possible to make some sort of server side boot counter that would delete the hex file after 2 boots instead of just one? (Just curious. I have limited knowledge of server side stuff, but it's interesting.) My script is effectively a shell script reading the TFTP log file. If it sees a sucessful transfer to an IP, it converts that IP to a hex, and then does an unlink of that hex file in the config directory. I think it would be fairly easy to add a counter. Right now the script doesn't keep any state at all. I guess it would depend of what TFTP server/service you are using. HTH, --- Ryan Go Renaissance Technologies Corp. --- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] question about freedos bootdisk image
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo, from reading the list in the last few days I learnt that the dos bootdisks are deemed deprecated. Anyway, is anyone still using them? I think they are much more convenient to customize when compared to the linux boot disks and their uncountable ;) prerequisites (with specific versions ...). I have a strange problem where the bootdisk (real floppy) works fine, but as soon as I make an image from this disk and use this as my own empty-bootdisk.img for PXE booting, it stops working. The symptom is that the config.sys is not used, i.e. himem.sys and ifshlp.sys are not loaded. No matter if I call the file config.sys or fdconfig.sys, use plain msdos syntax or advanced freedos syntax ... it fails. I added a minimalistic german keyboard driver (from 1991 c't), and I can devload the ifshlp.sys, but then I don't have enough memory to execute perl and spawned programs like fdisk. devload.com hangs on loading himem.sys ;( I even tried with original msdos 5, but this could not execute perl at all. A related question: if the primary boot option is PXE boot, how do I prevent an infinite loop? Currently linuxboot-4.6 gets booted by PXE, WXP setup.exe configures the disk, but even on the 2nd run it does not recognize that the disk is already formatted and WXP waits to get booted to continue the windows configuration. Can I rename the tftpboot config file (the 32bit hex-IP filename) somehow during or after the first run, so that the default file can have localboot as 1st option? Can PXE boot look at the hard disk and decide it's worth booting? While playing with unattended I created a file C0A86420 manually (for 192.168.100.32, my test machine) with localboot option (and this works), but I'd like to have even this one automated ;). Thanks in advance! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDN95t6tRbEjWup3IRAtFJAJ4vaBttBGjfhVOitNhoh8GmdYCNLwCgheyC jWPEFS9JOAP8GIUrmu+kMdQ= =cCuB -END PGP SIGNATURE- --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] question about freedos bootdisk image
A related question: if the primary boot option is PXE boot, how do I prevent an infinite loop? Currently linuxboot-4.6 gets booted by PXE, WXP setup.exe configures the disk, but even on the 2nd run it does not recognize that the disk is already formatted and WXP waits to get booted to continue the windows configuration. Can I rename the tftpboot config file (the 32bit hex-IP filename) somehow during or after the first run, so that the default file can have localboot as 1st option? Can PXE boot look at the hard disk and decide it's worth booting? While playing with unattended I created a file C0A86420 manually (for 192.168.100.32, my test machine) with localboot option (and this works), but I'd like to have even this one automated ;). Here we set our default boot option to be localboot. We then create hex files for the clients that need to be installed. We also have a script in our TFTP server that deletes/moves the client hex config file after it finishes handing out the TFTP image. HTH, --- Ryan Go Renaissance Technologies Corp. Direct: 631-444-7105 --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] question about freedos bootdisk image
That's a clever idea. However, if Thomas is using the DOS boot disks, then he would need to boot twice. Once to fdisk, and once to install. Do you suppose it would be possible to make some sort of server side boot counter that would delete the hex file after 2 boots instead of just one? (Just curious. I have limited knowledge of server side stuff, but it's interesting.) Ryan Go [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 09/26/2005 04:36 PM To:Thomas Seeling [EMAIL PROTECTED] cc:unattended-info@lists.sourceforge.net Subject:Re: [Unattended] question about freedos bootdisk image A related question: if the primary boot option is PXE boot, how do I prevent an infinite loop? Currently linuxboot-4.6 gets booted by PXE, WXP setup.exe configures the disk, but even on the 2nd run it does not recognize that the disk is already formatted and WXP waits to get booted to continue the windows configuration. Can I rename the tftpboot config file (the 32bit hex-IP filename) somehow during or after the first run, so that the default file can have localboot as 1st option? Can PXE boot look at the hard disk and decide it's worth booting? While playing with unattended I created a file C0A86420 manually (for 192.168.100.32, my test machine) with localboot option (and this works), but I'd like to have even this one automated ;). Here we set our default boot option to be localboot. We then create hex files for the clients that need to be installed. We also have a script in our TFTP server that deletes/moves the client hex config file after it finishes handing out the TFTP image. HTH, --- Ryan Go Renaissance Technologies Corp. Direct: 631-444-7105 --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info NOTICE: The information contained in this email message, and any attachments accompanying this transmission, may be legally privileged and/or confidential and protected health information. This information is intended only for the use of the individual(s) and/or entity identified above. The authorized recipient of this information is prohibited from disclosing this information to any other party unless required to do so by law or regulation and is required to protect the information after its stated need has been fulfilled. If you are not the intended recipient, or an employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any disclosure, printing, copying, forwarding, or distributing of this information is strictly prohibited. If you have received this communication in error, please notify the sender immediately, by telephone or return email, to advise of wrongful receipt and confirm your understa nding of this Notice. Thank You.
RE: [Unattended] Question
Title: Nachricht After installing cygwin and trying to run the make command again i now see this issue. $ makeversion=`../linuxboot/tools/version.pl` \echo -e "SET VERSION=$version\r" template/version.bat.tmpcmp -s template/version.bat.tmp template/version.bat || mv template/version.bat.tmp template/version.batrm -f template/version.bat.tmpMaking images/b44.imz.../bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mmd: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not found/bin/bash: line 1: mcopy: command not foundmake: *** [images/b44.imz] Error 127 Thanks, Brian From: Steffen Hornung [mailto:[EMAIL PROTECTED] Sent: Thursday, June 23, 2005 3:25 AMTo: Hansen, Brian; unattended-info@lists.sourceforge.netSubject: AW: [Unattended] Question Yes, you probably missed to install cygwin since "make" is a linux command not provided by unattended. So you have to install cygwin to get your minilinux inside your windows. Start the cygwin shell and there type your make whatever. Best regards Steve -Ursprüngliche Nachricht-Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Hansen, BrianGesendet: Donnerstag, 23. Juni 2005 03:54An: unattended-info@lists.sourceforge.netBetreff: [Unattended] Question I am trying to test this application for an unattended install of Windows 2003. When trying to use the network boot procedure I follow this step: In the bootdisk directory, typing make images will generate the floppy disk images. Typing make iso will create the ISO image. Typing make tftpboot will populate the tftpbootdirectory. And simply typing make will do all these. This does not work since there is no "make" file anywhere in the distribution. The unattended server is Windows 2000. Is there something else im missing or need to have installed to make this work? Thanks, Brian http://unattended.sourceforge.net/index.php Brian Hansen | eLoyalty Corporation | 7800 Equitable Drive, Suite 100 | Eden Prairie, MN | 55344 | USA| o - 952.908.8156 | f - 952.908.8001 | [EMAIL PROTECTED]
RE: [Unattended] Question
On Thu, 2005-06-23 at 16:38 -0500, Hansen, Brian wrote: After installing cygwin and trying to run the make command again i now see this issue. Why not just use the binaries and install it manually? It's very easy to do. I've been using those without any problems for a while on OpenBSD and Solaris servers. http://download.sourceforge.net/unattended/unattended-4.6-linuxboot.zip Just copy everything from the unattended-4.6/linuxboot/tftpboot directory to your server's tftp directory. Then just copy over the pxelinux.0 from here: http://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-3.09.zip If you want a cd image, just use unattended-4.6/linuxboot/linuxboot.iso. Also, if you want a floppy or cdrom you can use one from Etherboot: http://rom-o-matic.net/5.4.0/ /bin/bash: line 1: mcopy: command not found That's part of mtools. I'm not sure if that works under Cygwin. BTW, the lack of a Reply-To on the mailing list is very annoying. --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477alloc_id=16492op=click ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question
Title: Question I am trying to test this application for an unattended install of Windows 2003. When trying to use the network boot procedure I follow this step: In the bootdisk directory, typing make images will generate the floppy disk images. Typing make iso will create the ISO image. Typing make tftpboot will populate the tftpbootdirectory. And simply typing make will do all these. This does not work since there is no make file anywhere in the distribution. The unattended server is Windows 2000. Is there something else im missing or need to have installed to make this work? Thanks, Brian http://unattended.sourceforge.net/index.php Brian Hansen | eLoyalty Corporation | 7800 Equitable Drive, Suite 100 | Eden Prairie, MN | 55344 | USA | o - 952.908.8156 | f - 952.908.8001 | [EMAIL PROTECTED]
Re: [Unattended] Question
Hansen, Brian wrote: I am trying to test this application for an unattended install of Windows 2003. When trying to use the network boot procedure I follow this step: In the bootdisk directory, typing** * make images * will generate the floppy disk images. Typing *** make iso * will create the ISO image. Typing *** make tftpboot * will populate the tftpboot directory. And simply typing *** make * will do all these. This does not work since there is no make file anywhere in the distribution. The unattended server is Windows 2000. Is there something else im missing or need to have installed to make this work? Make is a linux only command, either install cygwin on the server or follow this how-to for Windows systems to get it done without the need of non-native windows commands: http://unattended.sourceforge.net/pxe-win2k.html Best regards, Kaari --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477alloc_id=16492op=click ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
AW: [Unattended] Re: Unattended Question
Hi, I'm not sure if I understood. But if you only want to get other options in the menu where to choose sales/developer/Base installation. You can just copy the base.bat to a new one and edit this file. Or just create a new batch file. Beware of the first line! -- Moritz -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:unattended-info- [EMAIL PROTECTED] Im Auftrag von Niels S. Richthof Gesendet: Samstag, 21. Mai 2005 10:26 An: unattended-info@lists.sourceforge.net Betreff: [Unattended] Re: Unattended Question Hi Michael! I'm sorry if I intruded on your e-mail. That would be okay I you wrote to the unattended-info list. I've bounced your mail to that list and answer it there so other people can answer too or benefit from the answers. However, I have pretty much automated the script but I have come to one menu that I really cannot explain. When the user is prompted for a sales/developer/Base kind of computer, how can I edit this menu to better fit my Batch files I have created for various group of people. You can use a self-written config.pl. There you can implement a user-defined menu where you can select the type of computer etc. (My favorite computer hard- and software dealer www.b-c-s.de are doing that - maybe I can ask them to share their script and I put parts of it to the example page in our documentation) My preferred way is to use a database. Please have a look at sample- config.pl in the /install/site directory. Jeffrey C Albo posted a documentation for that a couple days ago on the devel-list.[*] With a database you are not answering ANY question ... nice, isn't it? cu Niels [*] I promised to put that into the documentation. Unfortunately, I had a bike accident and was in hospital a couple of days. So, please, have some patient with me. -- A: Weil es die Lesbarkeit des Textes verschlechtert. F: Warum ist TOFU so schlimm? A: TOFU F: Was ist eins der groesste Aergernisse in E-Mails? --- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7412alloc_id=16344op=click ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info --- This SF.Net email is sponsored by Yahoo. Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Unattended Question
I'm sorry if I intruded on your e-mail. I've been to the regular mailing list and I couldn't find the resouce I needed. I've been trying to deploy unattended and its a very nice project. However, I have pretty much automated the script but I have come to one menu that I really cannot explain. When the user is prompted for a sales/developer/Base kind of computer, how can I edit this menu to better fit my Batch files I have created for various group of people. I don't know where this menu is called from, I think its the one before the postinstall.bat is created. Thanks for the help, sorry for the disturbance Michael __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com --- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7412alloc_id=16344op=click ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] Question on keys.bat
Hi, would someone feel like giving me an example of keys.bat ? kind regards, Tarjei -- Tarjei Huse [EMAIL PROTECTED] --- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7412alloc_id=16344op=click ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
AW: [Unattended] Question on keys.bat
-Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:unattended-info- [EMAIL PROTECTED] Im Auftrag von Tarjei Huse Gesendet: Donnerstag, 19. Mai 2005 11:48 An: unattended-info@lists.sourceforge.net Betreff: [Unattended] Question on keys.bat Hi, would someone feel like giving me an example of keys.bat ? snip-- @SET office2k3=1234567890 @SET corel12=1234567-123456-789 Snip Regards, Moritz kind regards, Tarjei -- Tarjei Huse [EMAIL PROTECTED] --- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7412alloc_id=16344op=click ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info --- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_idt12alloc_id344op=click ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] question
I don´t understood what make a PXE server has to do with the project, but yes it can be used with one, I boot trough a DOS floppy image supplied by a PXE service (dhcp3-server + tftpd-hpa + syslinux) configured in a linux server. How do you get your unattended share mapped to Z doesn't really matter and the project doesn´t show all the possible ways. You can even boot trough a CDROM or floppy with ROM images to get the images of the PXE server if your network card doesn´t allow to do that directly. Edmundo Valle Neto Rick Elnor escreveu: Could your software be used to make a PXE server which supplied Linux images? --- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info Esta mensagem foi verificada pelo E-mail Protegido Terra. Scan engine: McAfee VirusScan / Atualizado em 29/04/2005 / Versão: 4.4.00 - Dat 4480 Proteja o seu e-mail Terra: http://mail.terra.com.br/ --- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] question
Could your software be used to make a PXE server which supplied Linux images? --- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20 ___ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] question
I have the middle key word in my unattended file and it does not cause these questions to be answered automatically. It still asks me what I want to install and then at the end of the install it runs the middle and bottom line and installs the programs again. Also after it installs SP4 (on w2k install) it reboots then logs in and does nothing more, when I terminal service into the box it starts running the win2ksp4-updates.bat portion, am I doing something wrong? Here are the relevant files. [_meta] fdisk_lba=1 fdisk_cmds=fdisk /clear 1;fdisk /pri:2000;fdisk /activate:1 fdisk_confirm=0 format_cmd=format c: /y /z:seriously /q /v: replace_mbr=1 edit_files = 0 top=base2000.bat middle=7-zip.bat,putty.bat,sun-jre.bat,tightvnc.bat local_admins=Administrator local_admins_password=xx ntp_servers=192.168.252.11 :: MASTER: Perform a basic server installation @Echo off :: Set Automatic Updates to download automatically but prompt before install. todo.pl auconfig.pl 3 --policy --sus http://192.168.194.7; :: Update windows and turn off annoying stuff. todo.pl win2ksp4-notips.pl win2k-updates.bat .reboot :: Defragment the drive to collect the free space. todo.pl defrag.bat :: Set IIS startup type to manual and ignore if not installed. todo.pl .ignore-err 255 startup-type.pl Manual IISADMIN .ignore-err 255 startup-type.pl Manual W3SVC :: Turn off Windows Messenger service todo.pl startup-type.pl Manual Messenger :: Cleanup messes left over from installing. todo.pl hidepw.pl bootini.pl fixtz.pl -Original Message- From: Patrick J. LoPresti [mailto:[EMAIL PROTECTED] Sent: Monday, September 06, 2004 11:11 AM To: Adriel Navarro Cc: [EMAIL PROTECTED] Subject: Re: [Unattended] question Adriel Navarro [EMAIL PROTECTED] writes: I am running 4.4b with the linux boot over a samba share. I noticed that I now get a menu asking what optional scripts I want to run, where does it generate this list from? It generates the list by scanning Z:\scripts for all of the .bat files whose first line reads OPTIONAL: Is there a way to automatically answer these questions in the unattended file? Yes, by setting the [_meta]/middle key. This is documented (briefly) in http://unattended.sourceforge.net/advanced.html. I'm still having trouble getting the NIC card configs working right, it seems to be ignoring anything I put in the unattended file for NIC 2 and continues using dhcp after the install. Here is the relevant part: [Networking] InstallDefaultComponents=Yes Redundant, as it turns out (http://support.microsoft.com/?id=247952), but not harmful. [NetAdapters] Adapter0=params.Adapter0 Adapter1=params.Adapter1 Adapter2=params.Adapter2 OK, as far as it goes, but where are your [params.Adapter0], [params.Adapter1], and [params.Adapter2] sections? Without those sections, Setup has no way of knowing which adapter is Adapter0, which is Adapter1, and which is Adapter2. You can either identify them by PCI location or by PCI vendor/device ID plus MAC address. See http://www.microsoft.com/resources/documentation/windowsServ/2003/all/t echref/en-us/w2k3tr_u_paramsadapterinstance.asp. [params.MS_TCPIP.Adapter2] SpecificTo=Adapter2 NetBIOSOptions=1 DNSDomain=x DefaultGateway=192.168.202.210 SubnetMask=255.255.128.0 DNSServer=192.168.252.11,192.168.252.12 Should that be DNSServerSearchOrder? - Pat --- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_idP47alloc_id808op=click ___ unattended-info mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] question
Adriel Navarro [EMAIL PROTECTED] writes: I am running 4.4b with the linux boot over a samba share. I noticed that I now get a menu asking what optional scripts I want to run, where does it generate this list from? It generates the list by scanning Z:\scripts for all of the .bat files whose first line reads OPTIONAL: Is there a way to automatically answer these questions in the unattended file? Yes, by setting the [_meta]/middle key. This is documented (briefly) in http://unattended.sourceforge.net/advanced.html. I'm still having trouble getting the NIC card configs working right, it seems to be ignoring anything I put in the unattended file for NIC 2 and continues using dhcp after the install. Here is the relevant part: [Networking] InstallDefaultComponents=Yes Redundant, as it turns out (http://support.microsoft.com/?id=247952), but not harmful. [NetAdapters] Adapter0=params.Adapter0 Adapter1=params.Adapter1 Adapter2=params.Adapter2 OK, as far as it goes, but where are your [params.Adapter0], [params.Adapter1], and [params.Adapter2] sections? Without those sections, Setup has no way of knowing which adapter is Adapter0, which is Adapter1, and which is Adapter2. You can either identify them by PCI location or by PCI vendor/device ID plus MAC address. See http://www.microsoft.com/resources/documentation/windowsServ/2003/all/techref/en-us/w2k3tr_u_paramsadapterinstance.asp. [params.MS_TCPIP.Adapter2] SpecificTo=Adapter2 NetBIOSOptions=1 DNSDomain=x DefaultGateway=192.168.202.210 SubnetMask=255.255.128.0 DNSServer=192.168.252.11,192.168.252.12 Should that be DNSServerSearchOrder? - Pat --- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=5047alloc_id=10808op=click ___ unattended-info mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-info
[Unattended] question
Title: Message I am running 4.4b with the linux boot over a samba share. I noticed that I now get a menu asking what optional scripts I want to run, where does it generate this list from? Is there a way to automatically answer these questions in the unattended file? I'm still having trouble getting the NIC card configs working right, it seems to be ignoring anything I put in the unattended file for NIC 2 and continues using dhcp after the install. Here is the relevant part: [Networking] InstallDefaultComponents=Yes [NetAdapters] Adapter0=params.Adapter0 Adapter1=params.Adapter1 Adapter2=params.Adapter2 [NetClients] MS_MSClient=params.MS_MSClient [NetServices] MS_SERVER=params.MS_SERVER [NetProtocols] MS_TCPIP=params.MS_TCPIP MS_NetMon=params.MS_NetMon [params.MS_TCPIP] DNS=Yes UseDomainNameDevolution=No EnableLMHosts=No AdapterSections=params.MS_TCPIP.Adapter0 AdapterSections=params.MS_TCPIP.Adapter1 AdapterSections=params.MS_TCPIP.Adapter2 [params.MS_TCPIP.Adapter0] SpecificTo=Adapter0 DHCP=Yes WINS=Yes WINSServerList=192.168.252.11,192.168.252.12 NetBIOSOptions=1 [params.MS_TCPIP.Adapter1] SpecificTo=Adapter1 DHCP=Yes WINS=Yes WINSServerList=192.168.252.11,192.168.252.12 NetBIOSOptions=1 [params.MS_TCPIP.Adapter2] SpecificTo=Adapter2 NetBIOSOptions=1 DNSDomain=x DefaultGateway=192.168.202.210 SubnetMask=255.255.128.0 DNSServer=192.168.252.11,192.168.252.12 IPAddress=192.168.252.100 DHCP=no WINS=Yes WINSServerList=192.168.252.11,192.168.252.12
Re: [Unattended] question about partitioning, software and driver installing
[EMAIL PROTECTED] writes: hi, i got a few question: 1. How could i change the install.pl (i dont have any clue about perl) to part the harddisk half c and other half d, automatically? First you ask about it publicly, embarrassing me into doing something. Next, download a new install.pl from http://unattended.sourceforge.net/testing/ and copy it to Z:\dosbin. You will find a new menu option to use a 50/50 split for C:/D:. 2. How could i give MS Office 2000 the Product key? i only got the update version, so normally i have to copy word97.exe on c: for the update to find an old version, but with unattended it wasnt nessesary, only key and Workgroup Samples folder (please excuse my bad english, i hope you know what i mean) for Word is needed in my case In later versions of Office, you can add PIDKEY=... to the msiexec command line, where ... is your product key with all hyphens deleted. I do not know whether this works for Office 2000. 3. is the only way to integrate drivers to copy them in the os folder an then choose the needed subdirs? do i have to know every hardware part from my computer and find all the driver .inf files? thx for every help I usually just add them all, or almost all, because most drivers are only loaded for the hardware they actually drive. (The .inf file specifies PCI vendor/device/subvendor/subdevice ID numbers.) The exception I found was a touchpad driver which always put a stupid icon in the system tray even on machines with no touchpad. So I have to un-select that one by hand. - Pat --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ unattended-info mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-info
Re: [Unattended] Question about DOS BOOT FLOPPY
[EMAIL PROTECTED] wrote: I am testing your application but I have a big problem : I am trying to create the DOS boot floppy from the image donwloaded with the version 4.0b and I can not create the floppy. I tested the 2 software recomanded by you and the result is the same. I donwloaded the version 3.5 and I can create with the same software the boot floppy. Do you have an idea to solve that ? What program did you try, and on what OS? If it was on Windows, did you try rawwrite? What was exactly the problem? --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ unattended-info mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-info
