On Mon, 14 Oct 2002, Lapo Luchini wrote:
2. tmake
Whops, I see my message was a bit obscure, but was meant to be a vote.
Well I'll say it not tmake seems useful enough to me to vote it.
Ok, then ;) I'll put your vote in the next issue.
On Thu, 19 Sep 2002, Max Bowsher wrote:
Brian Keener wrote:
On a side note - Max - did you have to make any changes to get it to
compile - for some reason - my compile is now broken and I am not sure
if it is the gcc3 install or the mingw changes. Do you have any
ideas?
Cygwin
Oops, sorry, forgot to change the subject line...
Igor
-- Forwarded message --
Date: Wed, 16 Oct 2002 05:33:43 -0400 (EDT)
From: Igor Pechtchanski [EMAIL PROTECTED]
To: Max Bowsher [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: [setup] (Accidental?) Change in sort
Pavel Tsekov wrote:
On Mon, 14 Oct 2002, Ryunosuke Satoh wrote:
Updated.
http://www.geocities.co.jp/SiliconValley-SanJose/5153/cygwin-package/doxygen-1.2.18-1-package.tgz
I downloaded the package twice (just to be sure) but it is an old package
- maybe you forgot to replace the
Can you think of any good reason why acronyms should be in lower case?
Is not it an author's right to name a product?
Serge
From: Christopher Faylor [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: ELFIO
Date: Tue, 15 Oct 2002 13:55:14 -0400
I can't think of any
Igor Pechtchanski wrote:
On Thu, 19 Sep 2002, Max Bowsher wrote:
Brian Keener wrote:
On a side note - Max - did you have to make any changes to get it to
compile - for some reason - my compile is now broken and I am not
sure if it is the gcc3 install or the mingw changes. Do you have
any
On Wed, Oct 16, 2002 at 04:40:48PM +0200, Serge Lamikhov-Center wrote:
Can you think of any good reason why acronyms should be in lower case?
Is not it an author's right to name a product?
I didn't realize that you were the original author. Yes, it is an
author's right to do so.
I've moved
On Wed, 16 Oct 2002, Max Bowsher wrote:
Christopher Faylor wrote:
With gcc-3.2, gcc2, and gcc-mingw-3.2-20020817 (IIRC) installed, the
link still fails. I've replaced 'gcc' and 'g++' by 'gcc-2' and
'g++-2' respectively in the suggested configure options... I
suppose the build would
On Wed, Oct 16, 2002 at 05:30:15PM +0100, Max Bowsher wrote:
Christopher Faylor wrote:
With gcc-3.2, gcc2, and gcc-mingw-3.2-20020817 (IIRC) installed, the
link still fails. I've replaced 'gcc' and 'g++' by 'gcc-2' and
'g++-2' respectively in the suggested configure options... I
suppose the
Would someone kindly upload a new version of curl to the sourceware mirrors for me?
Anyone... Robert? Corinna? Jason? CGF? Buehler?
I don't mean to be a pest, but I've requested this twice already over the last couple
weeks and have seen no response. If my repackaging is not correct or should
Abraham Backus wrote:
http://www.mycgiserver.com/~abackus/xerces-c-2.1.0-1.tar.bz2
http://www.mycgiserver.com/~abackus/xerces-c-devel-2.1.0-1.tar.bz2
I also have a source tar.bz2, but it is just over the 5M limit on any of
the public web servers that I have access to :) If anyone
Nicholas Wourms wrote:
Abraham Backus wrote:
http://www.mycgiserver.com/~abackus/xerces-c-2.1.0-1.tar.bz2
http://www.mycgiserver.com/~abackus/xerces-c-devel-2.1.0-1.tar.bz2
I also have a source tar.bz2, but it is just over the 5M limit on any
of the public web servers that I have
On Wed, Oct 16, 2002 at 04:44:56PM -0400, Jason Tishler wrote:
Kevin,
On Wed, Oct 16, 2002 at 01:00:31PM -0400, Roth, Kevin P. wrote:
Would someone kindly upload a new version of curl to the sourceware
mirrors for me?
Anyone... Robert? Corinna? Jason? CGF? Buehler?
I was about to do the
Same links apply for the packages themselves, the source package is on a
different site due to space limitations on all the other places that I know
of...
https://plus.xdrive.com/s/804283208Fy53FcN9QeLkMTBhBPtpartner=xdrv
click on the Download button, then double check the download filename...
Not sure if this is the best place to ask,
but could someone remove the exim entry from
http://www.cygwin.com/ported.html
now that it is in setup? That link is now obsolete.
Thanks
Pierre
On Thu, 2002-10-17 at 03:00, Roth, Kevin P. wrote:
Would someone kindly upload a new version of curl to the sourceware mirrors for me?
Anyone... Robert? Corinna? Jason? CGF? Buehler?
I don't mean to be a pest, but I've requested this twice already over the last
couple weeks and have seen
Sorry for the excessive mailing related to this, it's my first shot at
getting a cygwin package...
Anyway, I didn't like the process that xdrive provided for third party
retrieval of files and yahoo briefcase wouldn't let me share files either.
I put all the files on a single server for
I tried out this patch (took a few days because I needed to get xfree86 out
of CVS and build it). Very cool. Thanks a bunch to MATSUZAKI for coding
it! You saved me a lot of work.
Here's a screenshot...
http://home.adelphia.net/~tlcweb/cygwin/pseudo_rootless_screenshot.gif
Notice that you
Thomas,
What CVS tree did you pull this from? Why isn't MATSUZAKI working with
us? If I recall correctly, he wrote the Unicode support for xwinclip,
right?
Harold
Thomas Chadwick wrote:
I tried out this patch (took a few days because I needed to get
xfree86 out of CVS and build it).
You might want to take a look at this recent post of mine...
http://www.cygwin.com/ml/cygwin-xfree/2002-10/msg00091.html
Of particular interest to you might be the stuff at the bottom about how to
create a shortcut on the Windows desktop which runs xinit. You could easily
change the target
In response to your first question - the patch isn't in CVS. I pulled the
source from CVS, applied the patch that was posted to the ML, then built it.
Sorry if that wasn't clear.
As for your other 2 questions - I don't have an answer.
The fact that Matsuzaki posted this patch came as a
Oh my god, I completely missed this patch! Wow!
I can't wait to take a look at it tonight!
Harold
MATSUZAKI Kensuke wrote:
Thomas didn't talk about X Shape Extension.
I think Thomas's idea is something like this.
With this patch and -nodecoration option, it seems to work good.
Heh heh... as you will see from my reply that I just sent to MATSUZAKI's
post, I missed his email, or I saw it but I didn't realize that he wrote
a patch for rootless mode.
Very cool.
Harold
Thomas Chadwick wrote:
In response to your first question - the patch isn't in CVS. I pulled
the
On Wed, 16 Oct 2002, Harold L Hunt II wrote:
Oh my god, I completely missed this patch! Wow!
I can't remember this patch too. Either it got lost or was somehow
rejected by the mailserver or maybe was sent to a private address.
bye
ago
--
[EMAIL PROTECTED]
http://www.gotti.org
By the way, my ISP seems to be blocking downloads of exe's. Zipping it
seems to work. Please download the exe using this URL instead...
http://home.adelphia.net/~tlcweb/cygwin/XWin.zip
From: Thomas Chadwick [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED], [EMAIL
That's brilliant.
Works well on W2K serving a remote Linux. Problems with applications that spawn extra
child windows, help, abouts etc, being confined to the top left of the parent window.
I ssh tunelled stuff like ethereal with no other problems. Spotted the 'ghost' rubber
banding on
From: MATSUZAKI Kensuke [EMAIL PROTECTED]
To: Thomas Chadwick [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: Re: Rootless mode revisited...
Date: Thu, 17 Oct 2002 02:08:41 +0900
[snip]
3) A favorite tool of mine, x2x, is broken, which is due to the lack of
a
root window causing the mouse
I have seen this on multiple Win2k SP3 machines. I cannot perform a new install of
the XFree86 package. The setup proceeds as normal till it gets to the fonts. It will
freeze unpacking the first font package, and I have to cancel. I have tried to
manually running bunzip2 on any of the
support. (Jehan Bing, Harold Hunt)
5) Warning dialog on disruptive screen depth change --- not quite perfect.
(Harold Hunt)
Harold
xwin-20021016-2004.diff.bz2
Description: Binary data
xwin-newfiles.tar.bz2
Description: Binary data
xc-programs-Xserver-Imakefile-20021016-2004.diff
Description
, direct link:
http://www.msu.edu/~huntharo/xwin/shadow/XWin-Test66.exe.bz2 (1106 KiB)
Server source, direct link:
http://www.msu.edu/~huntharo/xwin/shadow/xwin-20021016-2004.tar.bz2 (90 KiB)
xc/config/cf (all files) diff against 20021016 XFree86 CVS:
http://www.msu.edu/~huntharo/xwin/shadow/xc
Thanks! This did the trick! I just have a question now, where is this
mount information stored? I started out by deleting any previous cygwin
directory trees. Does cygwin use the windows registry to save previous
configurations?
On Wed, 2002-10-16 at 18:39, Harold Hunt wrote:
Chris,
You
I didn't see a mention of the argument to invoke the new rootless mode
anywhere in this thread--no doubt it's in the updated man pages, but I just
grabbed the Test66 binary. Logically enough, it's '-rootless':
-rootless
EXPERIMENTAL: Run the server in pseudo-rootless mode.
You
Here is a patch suggested some time ago by Gerrit to
make the process of building a dll more clear:
http://sources.redhat.com/ml/cygwin/2002-08/msg01224.html
I have changed it to C instead of C++ and also added a remark
in the Linking to DLLs section about building your own
import lib.
Hi
I haven't had any response to this question. Can someone please tell me
who the maintainer of the cygwin/newlib package is?
I will address the question straight to him/her.
Thanks.
Anurag
On Fri, 11 Oct 2002 11:22:56 +1000
Anurag Sharma [EMAIL PROTECTED] wrote:
Hi All,
Does anyone
Hi!
Wednesday, 16 October, 2002 Sven Köhler [EMAIL PROTECTED] wrote:
SK the sollution that paths like //comp/share are interpreted like an
SK UNC-path is just not compatible with an application might expect from a
SK unix-environment.
Then those applications are making false assumptions.
Christopher Faylor wrote:
I think I figured out the problem. It was Windows 98 specific. I was
trying to fix the perl/dll problem but it only manifests, AFAICT, on
Windows NT, so I've turned off all of that for Windows 98.
The next snapshot may work better.
It sure did.
I tried the 20021016
Hey,
i reinstalled some packages and all my file permissions are now set to
777 mode.
Can i undo this ?
Why did it do this ? I never had this kind of problem before.
--
GarulfO:
--
There is much pleasure to be gained from useless knowledge.
Bertrand Russell (1872-1970) British philosopher,
Hello,
I compiled FLTK under cygwin and got the following warning multiple times.
/usr/lib/gcc-lib/i686-pc-cygwin/2.95.3-5/../../../../i686-pc-cygwin/bin/ld
C:\usr\i686-pc-cygwin\bin\ld
[Warning] cannot find entry symbol _WinMainCRTStartup; defaulting to
00401000
FLTK is a GUI library for
Also, Gary, you might want to try the most recent snapshot. I kludged
around some similar problems with rxvt and X. Maybe I got lucky and
fixed some problems with perl.
No such luck with 20021016 00:57:28. Sorry.
--
Gary R. Van Sickle
Brewer. Patriot.
--
Unsubscribe info: http
Hi,
after updating to the latest 3.2 (from 8h ago)
i get the above error message.
Should gcc find in /usr/lib/gcc-lib/arch whateverversion/cc1
on his own?
sample line:
gcc -mno-cygwin -o hello.exe hello.c
Also does not find his crt2.o and crtbegin.o etc.
(gcc invokes: ld -Bdynamic -o
This is because ntsec is now on by default. If you dont like having the
control this gives then add nontsec to your CYGWIN environment variable.
(this has been discussed very recently so a quick search of the archives
will give more detail)
-Original Message-
From: GarulfO:
Hi Tom,
No, even after un/reinstalling, I still see
* When emacs starts up, the display is usually shifted either down a
line or to the right a column from where it should be, with
extraneous characters showing in either the minibuffer, or the top
of the display (first line
Hello,
I have built gcc 3.2 with support for Ada.
However, every Ada program using the 'delay' statement can't be linked:
the 'delay' statement involves the 'nanosleep' system call the emulation
of which is not provided by the Cygwin dll.
Has anyone encountered the same kind of problem ?
Is
Andrei --
...and then Andrei Cernea said...
%
% Hi!
%
% I am using Cygwin 2.05. I am emailing you because of this:
%
%
% chmod --help
...
%
% Report bugs to [EMAIL PROTECTED].
%
%
% I noticed that in
Hi all,
now that ntsec is default, I guess we need to read up on what it does. So, I
went to the User's guide on the web and (tried to) read the doc. It sounds
great, thanks Corinna, but I'm afraid it's a bit too technical for me. I
would appreciate it if
there could be a list of do's and don'ts
Hi Andrei,
we see only part of your problem here. However, if you're asking on how to
make cygwin recognise that a shell script is executable, you should put
#! /bin/sh
as first line in the script. No chmod necessary (This is a FAQ actually).
(I don't know if chmod would work/is necessary with
Gary,
On Mon, Oct 14, 2002 at 10:24:57AM -0500, Gary R Van Sickle wrote:
I've never manually done anything with rebasing etc.
Nevertheless, rebasing should solve this problem. I encourage you to
try it and report your findings to the list.
Thanks,
Jason
--
Unsubscribe info:
just tried with ntsec enabled. if run as ./foo.sh the script foo.sh will run
whether or not the executable bit is set. the only difference was that bash
wouldn't auto complete it for me when not marked as executable ;)
-Original Message-
From: Kris Thielemans [mailto:[EMAIL
Hello
I am interested in building and running GDA ( GNOME Data Access at
http://www.gnome-db.org/ ) on
Cygwin.
It is built for Linux, but it is suppose to be portable to other platforms.
It does not require GNOME nor gtk+. It only requires libxml2 (included in
Cygwin) and glib-2.0 (already a
I doing the make command and at the first file it try to compile I'm
getting that error ccppc.exe: installation problem, cannot exec
`C:/Torn21_PPC_00/host/x86-win32/lib/gcc-lib/powerpc-wrs-vxworks/gcc-2.96/cp
p.exe': No more processes.
My problem seem to be comming from a
I cannot run vi in cygwin. It complains cygintl.dll
cannot be found. It may be due to the fact that I
installed multiple language support.
Where can I find this dll ? Is it all I need to fix
it?
How Man
__
Do you Yahoo!?
Faith Hill - Exclusive
Hello,
ioctl(SIOCGIFFLAGS) doesn't work the way I expected it to : it
apparently uses as an input the ifr_addr field of the output union
present in struct ifreq, instead of the ifr_name (first union in that
struct) which is used by the 2 Unices I have access to (Linux and
Solaris).
The code I'm
Hallo,
I have *not* updated Cygwin recently:
$ cygcheck -c cygwin
Cygwin Package Information
Package Version
cygwin 1.3.12-4
and everything works fine some days back when compiling C files,
now I'm having these problems:
$ mount
[...]
I tried continuing, it hangs for about 5 minutes, then displays Can't
read instruction at and some address starting with 7.
-Rolf
-Original Message-
From: Christopher Faylor [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 15, 2002 7:41 PM
To: [EMAIL PROTECTED]
Subject: Re: GDB
I get the same symptoms (without the -ldb and -lutils which I don't have)
Removing the -shared option from the gcc compile line fixes it for me.
Dave
NT SP6
cygwin 1.3.12-4
gcc 2.95.3-4
-Original Message-
From: Gerrit P. Haase [mailto:[EMAIL PROTECTED]]
Sent: 16
http://sources.redhat.com/newlib/
IIRC there is some information about reentrancy in
libc.info and libm.info -- have you read over that?
__
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos More
http://faith.yahoo.com
--
Unsubscribe
Christopher Faylor wrote:
I'm generating a new snapshot which should fix this. I've downloaded
ispell from franken.de and verified that it was previously broken but
seems to work now. I should probably incorporate this test into the
cygwin test suite.
PLEASE TRY THE SNAPSHOT and verify
[EMAIL PROTECTED] wrote:
snip
EXIM_PERL=/usr/src/perl-5.8.0-1/buildperl/perl.o
Try
EXIM_PERL=perl.o
It's complaining about not finding exim defined functions defined
in perl.c
/usr/src/exim-4.10-2/build-CYGWIN-i386/exim.c:2375: undefined
reference to `_init_perl'
expand.o: In function
The multiple cygwin1.dll version is generally a good idea, but for old apps
with only binaries available, it was nice to use multiple copies sparingly.
It would be nice to have a CYGWIN variable to disable the strict multiple
cygwin1.dll version checking feature.
I don't know if this would
Igor Pechtchanski wrote:
On 16 Oct 2002, Robert Collins wrote:
On Wed, 2002-10-16 at 09:11, Max Bowsher wrote:
David A. Cobb wrote:
Would it be a big deal to have the various setup scripts send their
output to, say, /var/log/setup/SCRIPTNAME.log?
Probably not, but
On Wed, 16 Oct 2002, David A. Cobb wrote:
Igor Pechtchanski wrote:
On 16 Oct 2002, Robert Collins wrote:
On Wed, 2002-10-16 at 09:11, Max Bowsher wrote:
David A. Cobb wrote:
Would it be a big deal to have the various setup scripts send their
output to, say,
Original Message:
-
From: Soren A [EMAIL PROTECTED]
Date: Wed, 16 Oct 2002 04:15:29 + (UTC)
To: [EMAIL PROTECTED]
Subject: Re: New cygwin .dir_colors
Jelks Cabaniss [EMAIL PROTECTED] wrote around 14 Oct 2002
David schrieb:
I get the same symptoms (without the -ldb and -lutils which I don't have)
Removing the -shared option from the gcc compile line fixes it for me.
Strange ... how does Perl's Configure script got the idea to use -shared
to try this compile?
Looks like a bug in the Configure...
oaidl.h uses a symbol CURRENCY that is not defined anywhere in the Cygwin
system headers.
Also, it would need to include wtypes.h and unknwn.h in order to compile.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
I'm going to go out on a limb here and guess that the reason you
haven't heard a response on this is because the answer is not something
that folks on this list know off the top of their head. You'll probably
find it more expedient and useful to check the Cygwin configure to determine
this
I think the answer to the question below hinges on the appearance
of a patch to implement 'nanosleep' from some interested party.
Larry
Original Message:
-
From: Pierre Habraken [EMAIL PROTECTED]
Date: Wed, 16 Oct 2002 11:55:15 +0200
To: [EMAIL PROTECTED]
Subject: 1.3.12-2:
Not really. You might want to try querying the original source of this
cross-compiler though. This list can't really answer questions about
software that isn't part of the Cygwin net release.
Larry
Original Message:
-
From: Alexandre April [EMAIL PROTECTED]
Date: Wed, 16 Oct
vent
Why don't people who post these kinds of questions think to look at the
available resources (web site, FAQ, email archives, etc) before posting???
/vent
OK, I guess that helped me! ;-)
Try www.cygwin.com/packages
If it's not obvious to you how this helps you solve your problem, check
Yes Victor, ispell is broken with the 1.3.13-2 cygwin1.dll
but there is already a fix available:
http://cygwin.com/ml/cygwin/2002-10/msg00862.html
http://cygwin.com/snapshots/
Pierre
Victor Stepanov wrote:
Pierre,
Did you tried to use your ispell binarys with latest cygwin dll and libs?
.
The next snapshot may work better.
It sure did.
I tried the 20021016 snapshot and it does not crash on W89SE like the
20021015 snapshot. Also more now works properly in a cygwin/DOS box.
The snapshot info from cygcheck is:
[snip]
Phew! Thanks for checking this.
cgf
--
Unsubscribe info: http
On Wed, Oct 16, 2002 at 09:20:18AM -0400, Rolf Campbell wrote:
I tried continuing, it hangs for about 5 minutes, then displays Can't
read instruction at and some address starting with 7.
Hmm. Is this with the experimental version of gdb or the crufty version?
cgf
--
Unsubscribe info:
On Wed, Oct 16, 2002 at 03:18:52AM -0500, Gary R. Van Sickle wrote:
Also, Gary, you might want to try the most recent snapshot. I kludged
around some similar problems with rxvt and X. Maybe I got lucky and
fixed some problems with perl.
No such luck with 20021016 00:57:28. Sorry.
Can
On Wed, Oct 16, 2002 at 07:19:10AM -0400, Jason Tishler wrote:
Gary,
On Mon, Oct 14, 2002 at 10:24:57AM -0500, Gary R Van Sickle wrote:
I've never manually done anything with rebasing etc.
Nevertheless, rebasing should solve this problem. I encourage you to
try it and report your findings to
On Wed, Oct 16, 2002 at 09:00:59AM +, skyper wrote:
Hi,
after updating to the latest 3.2 (from 8h ago)
i get the above error message.
Should gcc find in /usr/lib/gcc-lib/arch whateverversion/cc1
on his own?
sample line:
gcc -mno-cygwin -o hello.exe hello.c
Also does not find his crt2.o
New News:
===
I have updated the version of fetchmail to 6.1.0-1. The tarballs should
be available on a Cygwin mirror near you shortly.
fetchmail 6.1.0 was released to address the following security advisory:
http://security.e-matters.de/advisories/032002.html
Old News:
===
I just installed Cygwin. When I try to launch using desktop Cygwin icon,
a window launches momentarilly, then disappears. I also tried running
the cygwin.bat file, but that doesn't work. It tries to chdir to a bin
directory that isn't there. I tried uninstalling everything and doing a
Both.
-Original Message-
From: Christopher Faylor [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 16, 2002 11:36 AM
To: [EMAIL PROTECTED]
Subject: Re: GDB always receives sigsegv with cygwin 1.3.13-2
On Wed, Oct 16, 2002 at 09:20:18AM -0400, Rolf Campbell wrote:
I tried
On Wed, Oct 16, 2002 at 09:36:23AM -0400, Pierre A. Humblet wrote:
Christopher Faylor wrote:
I'm generating a new snapshot which should fix this. I've downloaded
ispell from franken.de and verified that it was previously broken but
seems to work now. I should probably incorporate this test into
Larry Hall wrote:
Just installed the new cygwin and the old directory listing
colors are no longer recognized. Now it only distinguishes
between normal files (red), directories (dark blue), and
links (cyan). It used to distinguish between the file types
too, i.e., .zip, .c,.txt, .jpg
Actually, my inquiry was to Soren w.r.t. his comment about the
desire to have dircolors output the Cygwin terminal information
as well. You chopped that part out of the text you quoted below
so it makes it look like I was responding to your issue specifically.
I agree with you that you've found
Based on your general description, it's not clear why you see the problem
you do. Of course, the devil is in the details and those are lacking. The
log files from setup might be of some help. However, you should be able
to resolve your immediate problem by simply editing your cygwin.bat file
On Wed, 16 Oct 2002, [EMAIL PROTECTED] wrote:
Original Message:
-
From: Soren A [EMAIL PROTECTED]
Date: Wed, 16 Oct 2002 04:15:29 + (UTC)
To: [EMAIL PROTECTED]
Subject: Re: New cygwin .dir_colors
[snip]
The dircolors command in Cygwin should, IMHO, output its
On Wed, Oct 16, 2002 at 11:39:15AM -0400, Christopher Faylor wrote:
On Wed, Oct 16, 2002 at 09:00:59AM +, skyper wrote:
Hi,
after updating to the latest 3.2 (from 8h ago)
i get the above error message.
Should gcc find in /usr/lib/gcc-lib/arch whateverversion/cc1
on his own?
GDB does not 'crash', so it does not produce a traceback. The only
traceback that I can get is of the program I'm debugging, which I don't
think is meaningful, and I can't seem to copy/paste from the gdb console
window.
-Rolf
-Original Message-
From: Christopher Faylor [mailto:[EMAIL
Eduardo Chappa writes:
Let me tell you my part of the story. I have compiled the imapd server,
and as to how I understand that it should work, it works. However, one of
the people in this forum tells me that it does not work for him.
I thought i would pass along my recent experience with the
Hi,
Is LIBCMT.LIB available with CYGWIN gcc? If not, what is the possible
alternatives?
I have a C program for a device that calls _beginthead and _end thread
directly . LIBCMT.LIB certainly has them.
Your help would be greatly appreciated.
Plese send your reply to [EMAIL PROTECTED]
Regards,
On Wed, Oct 16, 2002 at 03:18:52AM -0500, Gary R. Van Sickle wrote:
Also, Gary, you might want to try the most recent snapshot. I kludged
around some similar problems with rxvt and X. Maybe I got lucky and
fixed some problems with perl.
No such luck with 20021016 00:57:28. Sorry.
Can you
Thanks to the help of lots of folks, I now have emacs goodness in both
bash and X. I've tried to transfer the knowledge to
http://www.emacswiki.org/cgi-bin/wiki.pl?CygwinizedEmacsHOWTO
Feel free to add/modify. HTH another newbie.
--
Unsubscribe info:
Hi,
I was wondering if anyone has sucessfully got apache going as a service? I
installed it as a service and worked for about 5 minutes but then would not
tender to clients, although the daemon was still in listening state. I then
tried to run it through inetd but same symptons as before, only
On Wed, Oct 16, 2002 at 05:10:03PM +, skyper wrote:
On Wed, Oct 16, 2002 at 11:39:15AM -0400, Christopher Faylor wrote:
Please send the output of 'cygcheck -r -s -v' as an attachment to this
mailing list.
here we go...
That helped. You need to download the gcc-mingw package.
I thought
On Wed, Oct 16, 2002 at 01:21:14PM -0400, Rolf Campbell wrote:
GDB does not 'crash', so it does not produce a traceback. The only
traceback that I can get is of the program I'm debugging, which I don't
think is meaningful, and I can't seem to copy/paste from the gdb console
window.
Huh? You
On Wed, Oct 16, 2002 at 01:17:14PM -0500, D. N. Knisely wrote:
It looks like something has changed in 1.3.13-2 related to poll or waiting
for signals? Possibly there has always been a race condition that is now
occurring 100% of the time with 1.3.13-2, but never occurred with previous
versions.
Igor,
I don't think you understand. Asking for a patch is supposed to kill
a thread. You're not actually supposed to do anything as a result. It's
just our code word on this list for this discussion is over. Sorry you
didn't understand that. ;-)
In all seriousness (and I *was* joking with
New News:
===
I have updated the version of PostgreSQL to 7.2.3-1. The tarballs should
be available on a Cygwin mirror near you shortly.
PostgreSQL 7.2.3 is a bug fix release addressing a serious problem with
vacuum that could result in data loss. See the following for more
details, if
Sorry, I'm not that good at interpreting setup log files. Perhaps
others can help. I'm assuming c:\foo exists locally. I'm a bit
concerned by messages like compress_bz::error called but that might
be fine. Better info would be the output of cygcheck -s -r -v. That
I can read *and*
On Wed, 16 Oct 2002, [EMAIL PROTECTED] wrote:
Igor,
I don't think you understand. Asking for a patch is supposed to kill
a thread. You're not actually supposed to do anything as a result. It's
just our code word on this list for this discussion is over. Sorry you
didn't understand
Having looked at the recent discussion about rebase and apache and
having tried everything I can think of, I come to the list for the first
time...
I installed cygwin virgin from the web Monday on a newly reimaged Win XP
Professional machine.
I proceeded to run /usr/sbin/httpd in my usual way
When I run an application that uses the cygwin1.dll from either a Windows Service and
then from the command line I get different results when trying to read a text file.
As a Windows Service:
I use fopen and fgets to read a DOS text file and the CR/LF combinations are handled
properly. Meaning
One of the (implicit, unstated) rules of using 'setup.exe' is that you
run it in a directory other than the directory in which you will install
the files.
try this (read the entire reply before starting):
1. create a directory, say c:\cygwin-setup
2. download (or copy) setup.exe to that
On Wed, Oct 16, 2002 at 04:20:41PM -0500, Madsen, Mark wrote:
When I run an application that uses the cygwin1.dll from either a Windows Service and
then from the command line I get different results when trying to read a text file.
As a Windows Service:
I use fopen and fgets to read a DOS text
1 - 100 of 131 matches
Mail list logo
