Your message dated Wed, 08 Sep 2010 03:58:20 +
with message-id e1otbng-0005os...@ravel.debian.org
and subject line Closing old installation report #397133
has caused the Debian Bug report #397133,
regarding boot problem after installation
to be marked as done.
This means that you claim
my system is QNAP TS-409, which is armed platform
I have 3 disks and 2 partitions on each
When I start Debian Lenny installer based on instruction from
http://www.cyrius.com/debian/orion/qnap/ts-409/install.html my disks are
assigned to /dev/sd{a,b,c}.
I choose /dev/sda1 as /boot partition and
* Martin Minka martin.mi...@gmail.com [2010-05-13 14:37]:
Unfortunately I don't see the UBoot output, but when I try boot with
rescue image or start installation again I see the the /dev/sda1 is
swap and not /boot, so the order of disks changed.
Is this change of disk order the problem why
* Martin Minka martin.mi...@gmail.com [2010-05-13 15:27]:
does it mean I should follow your installation instruction and choose
expert mode installer and choose debian version squeeze ?
Will that work ?
No, the lenny installer won't do UUIDs. You have to use the squeeze
installer:
Hello Martin,
does it mean I should follow your installation instruction and choose
expert mode installer and choose debian version squeeze ?
Will that work ?
Thank you for you repeating help.
On 13. 5. 2010 15:16, Martin Michlmayr wrote:
* Martin Minkamartin.mi...@gmail.com [2010-05-13
I tried the 2.6.30 kernel you suggested, now it tries to boot, but I
get a kernel panik after trying to mount the root. I cannot make out
too much but I have console output which I do not have with the
regular 2.6.32 kernel.
I suspect they hang at the same place though, with the difference of
Part of the problem found !
I can now get console ouptup from 2.6.32 in the same way as 2.6.30-8
... the thing is that I found some bad RAM.
However the last thing I see is unpacking initrd something
After that it dies in the kernel, ( I have the debug flag on ) ... it
ends up in the
On Friday 12 February 2010, Lars Segerlund wrote:
I have a Sony Vaio TX3 ( VGN-TX3XT ) , which runs a on an intel
celeron ULW, and has a i945g graphics chip.
I have reinstalled with the squeeze install cd, but cannot boot the
kernels on the machine.
So the installer boots and works
Hello and thanks,
I will install 2.6.30 from stable tonight, I have tried 2.6.30 from squeeze
both 486 686 ... none boots.
I tried debian live ( standard ) yesterday with a 2.6.26 and it boots fine.
I have alredy removed the 'quiet' option it still stops at Booting the
kernel , I think I have
Should I create a bug bugreport ?
I was not sure until I checked with the list ?
regards, Lars Segerlund
On Feb 14, 2010 7:40 p.m., Frans Pop elen...@planet.nl wrote:
On Friday 12 February 2010, Lars Segerlund wrote: I have a Sony Vaio TX3 (
VGN-TX3XT ) , which ru...
So the installer boots
Hello,
I have a Sony Vaio TX3 ( VGN-TX3XT ) , which runs a on an intel
celeron ULW, and has a i945g graphics chip.
I have reinstalled with the squeeze install cd, but cannot boot the
kernels on the machine.
I can get into the machine from the rescue mode on the installer, (
if I chroot into
Hi Guys,
Just to let you know.
I have succesfully installed Debian-arm on NSLU2 with 2GB USB Penstick
on USB port 2.
After that, I was able to boot up with 20GB USB hard drive on port 1 but
when I connected 500GB drive I was not able to boot it up.
I was playing around with UUID and boot by
Hello,
When I boot or server (ia64) I receive theses errors :
Starting the hotplug events dispatcher: udevd
udevd[]: nss_ldap: could not connect to any LDAP server as (null) -
Can't contact LDAP server
udevd[]: nss_ldap: failed to bind to LDAP server ldaps://foo.bar:
Can't contact LDAP server
[mailto:[EMAIL PROTECTED]
Sent: Saturday,
September 02, 2006 3:36 AM
To: debian-boot
Cc: ???
Subject: kernel 2,6,17, boot
problem
Dear boot-list,
.
We are now using kernel 2.4.31.
We are trying to upgrade the kernel to 2.6.17.
The compilation was fine, but booting
Quoting datatek ([EMAIL PROTECTED]):
Dear boot-list,
.
We are now using kernel 2.4.31.
debian-boot is the list for developers of the Debian installer, not
exatly a list for booting problems.
As this is about compiling your own custom kernel on a Debian system,
I suggest you ask this in the
Jean-Pierre Broeders wrote:
I have a problem after i flashed for the last time using this manual:
http://www.cyrius.com/debian/nslu2/
After is flashed debian-sda1.bin, I shutdown the power and connect my
usb harddisk. When I power my nslu2 the only green led (also after some
couple of
On 24/07/06, Joey Hess [EMAIL PROTECTED] wrote:
Jean-Pierre Broeders wrote:
I have a problem after i flashed for the last time using this manual:
http://www.cyrius.com/debian/nslu2/
After is flashed debian-sda1.bin, I shutdown the power and connect my
usb harddisk. When I power my nslu2 the
Hello,
I have a problem after i flashed for the last time using this manual:
http://www.cyrius.com/debian/nslu2/
After is flashed debian-sda1.bin, I shutdown the power and connect my
usb harddisk. When I power my nslu2 the only green led (also after some
couple of hours) i see is the transfer
- Forwarded message from marcoux.olivier [EMAIL PROTECTED] -
Date: Mon, 27 Feb 2006 12:43:21 +0100
Subject: Re: boot problem on laptop compaq presario 2115EU
From: marcoux.olivier [EMAIL PROTECTED]
To: bubulle [EMAIL PROTECTED]
Thanks !
I finally get it working : the linux
debian
Hi,
The installation of the 3.1r1 froze on keyboard select
with my presario 2115EU laptop : Nothing respond on the
keyboard even Ctrl-Alt-Suppr. Has anyone already experienced
this kind of problem and found a solution ?
Thank you very much,
Olivier
Accédez au courrier électronique de La
Quoting marcoux.olivier ([EMAIL PROTECTED]):
Hi,
The installation of the 3.1r1 froze on keyboard select
with my presario 2115EU laptop : Nothing respond on the
keyboard even Ctrl-Alt-Suppr. Has anyone already experienced
this kind of problem and found a solution ?
Thank you very much,
Hi There,
My ultra sparc 80 (2CPU, 2GB RAM) doesn't boot after the installation by
using the netboot image. coule you please advise, thanks!
Regdars,
Le
boot msgs:
---
{1} ok boot disk1
Boot device: /[EMAIL
On Fri, Oct 01, 2004 at 07:10:53PM +0200, Le Chen - Sun IT Operations Central Europe
wrote:
Hi There,
My ultra sparc 80 (2CPU, 2GB RAM) doesn't boot after the installation by
using the netboot image. coule you please advise, thanks!
To me it sounds like http://bugs.debian.org/267428
Your message dated Sun, 25 Jul 2004 23:14:25 +0200
with message-id [EMAIL PROTECTED]
and subject line Processed: Bug#240372: boot problem, then broken fstab
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt
I can't boot with the ia64 beta 4 on my notebook.
The boot on the cd freeze the notebook.
My screen show me ascii flashing caracters.
here is my notebook - http://www.faurerap.perso.cegetel.net/
So i'm using the i386 version of DI beta 4
Thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
* VETSEL Patrice [EMAIL PROTECTED] [2004-05-12 20:04]:
I can't boot with the ia64 beta 4 on my notebook.
here is my notebook - http://www.faurerap.perso.cegetel.net/
So i'm using the i386 version of DI beta 4
This notebook uses the AMD chip which is i386 and not ia64 compatible.
The ia64
I am trying to install Debian 3.0 Woody Vanilla on an IBM PS/ValuePoint
486 machine. It has 64 MB of mem, IDE bios extensions, and a Maxtor
90640D4 hard disk. The cmos on this machine will not allow a boot from CD,
so I made set of 2 Vanilla boot floppies from CD#1. At the boot: prompt
I entered
Hi,
when i try to boot my system with bf24 it hang on Compaq CISS driver (v 2.4.5 )
i'm using an Acer Aspire 1400 and debian 3.0 r2
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sun, Feb 01, 2004 at 02:38:45PM +0100, [EMAIL PROTECTED] wrote:
Hi,
when i try to boot my system with bf24 it hang on Compaq CISS driver (v 2.4.5 )
i'm using an Acer Aspire 1400 and debian 3.0 r2
Maybe you should try out the new debian-installer beta2, look at :
Am Mit, den 10.12.2003 schrieb Barrie James um 23:34:
Suggestions : I'm surprised the network config is split into 2 sections, dhcp
and static. I would have thought that this would be 2 options in a single
section, maybe with dial-up as a further option as a lot of Debian users will
have
Package:installation-reports
Debian-installer-version: download 21 November - http://gluck.debian.org/
cdimage/testing/netinst/i386/beta-1/sarge-i386-netinst.iso 100MB
uname -a: Linux localhost 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686
GNU/Linux
Date: 25 or 26 Nov.
Method: Tried to boot
Hi AllI decided to try to install the Sarge
(testing) version as it has the 2.4 kernel. I got it installed but when I
went to reboot I get the following error.LILO 22.5.7.2 Loading LinuxEBDA is
big; kernel setup stackoverlaps Lilo second stage.Can anyone tell me
what the problem is and even
The initial boot hangs with:
modprobe: failed to load module vesafb
I've tried mono and video=vga16:off as boot options. Same problem...
I've tried both the businesscard and netinst iso.
-Thomas
_
Wußten Sie, daß Sie Ihren
On Wed, Oct 01, 2003 at 08:15:07PM +0200, thomas corda wrote:
The initial boot hangs with:
modprobe: failed to load module vesafb
I've tried mono and video=vga16:off as boot options. Same problem...
I've tried both the businesscard and netinst iso.
Thanks for telling. Are you willing to
Thanks for telling. Are you willing to tell more?
Like which images from which site you use.
Tell also more about the hardware you are using.
I've used the images from
http://gluck.debian.org/cdimage/testing/netinst/i386/
The PC:
Dual Celeron 500 (Abit BP6 MoBo)
256MB RAM
4 hd + 2 cd drives
On Wed, Oct 01, 2003 at 09:37:22PM +0200, thomas corda wrote:
Thanks for telling. Are you willing to tell more?
Like which images from which site you use.
Tell also more about the hardware you are using.
I've used the images from
http://gluck.debian.org/cdimage/testing/netinst/i386/
The
On Mon, Aug 04, 2003 at 12:57:46AM -0400, soupman wrote:
Hi!
This:
http://lists.debian.org/debian-boot/2003/debian-boot-200302/msg00253.html
|
| I think I only have 8MB of RAM is that maybe the problem? If so, is
|
| Yes.
|
| there a way to work around that?
|
| Get Slink disks from
Hi!
This:
http://lists.debian.org/debian-boot/2003/debian-boot-200302/msg00253.html
appears to be an architecture problem. I have reached the installation
screen without a problem using a computer with 8MB RAM, but it failed as
per the message with another computer (Thinkpad AT clone) with 8MB
Hello,I am trying to install debian Linux over network, i am using
floppies to boot a 50MHz 486 16meg of Ram , i get the 'boot:' prompt without
problems, i then hit enter to install default optionScreen looks like
thisBoot:Loading Linux.bin . . . . . . . . . . . . . . . . . .
Ready.
Then
On Sat, Jul 12, 2003 at 10:21:01PM +1000, Michael wrote:
Hello,
I am trying to install debian Linux over network, i am using floppies to boot a
50MHz 486 16meg of Ram , i get the 'boot:' prompt without problems, i then hit enter
to install default option
Screen looks like this
Boot:
I recently installed Debian from the LordSutch.com ISOLINUX mini-iso. When
I got to the step where you try to boot from the hard drive, it did not
work. I can boot from the boot floppy created during installation. But when
I try to boot from the hard drive I get a text screen that says:
MBR
01
On Sun, Jul 06, 2003 at 06:57:47PM -0500, Jeff wrote:
I recently installed Debian from the LordSutch.com ISOLINUX mini-iso. When
I got to the step where you try to boot from the hard drive, it did not
work. I can boot from the boot floppy created during installation. But when
I try to boot
Hi!
I've try to boot Debian 3.0 with experimental 2.4
kernel, but after one screen of stuff the boot process stops. Actually it
come to the point:
enabled ExtINT on CPU#0
ESR value before enabling vector :
0002
Later I try to use kernel parameters debug, nomce,
nmi_watchdog, but no
i cannot install Debain on a G4 867 dual becaus it can't find the hard
disk.
under mac OS x it is located in /dev/rdisk0 but Debian installer can't
find it
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sun, Nov 24, 2002 at 02:26:09PM +0100, Dario Meloni wrote:
i cannot install Debain on a G4 867 dual becaus it can't find the hard
disk.
under mac OS x it is located in /dev/rdisk0 but Debian installer can't
find it
d-i powerpc port is currently suspended because noone works on it.
On Sun, Nov 24, 2002 at 04:34:32PM +0100, Bastian Blank wrote:
On Sun, Nov 24, 2002 at 02:26:09PM +0100, Dario Meloni wrote:
i cannot install Debain on a G4 867 dual becaus it can't find the hard
disk.
under mac OS x it is located in /dev/rdisk0 but Debian installer can't
find it
d-i
Hello all,
I'm with some troubles on trying to boot a kernel in a dual PPro machine. When
a compile the kernel with smp support the machine hungs during the boot, this occurs
exactly when the dac960 driver is being loaded. When I remove the smp support the
driver is
On Tue, 30 Apr 2002 20:37:53 -0300
Carlos Francisco Regis [EMAIL PROTECTED] wrote:
I think the problem is the i440gx pci bridge and the pci-apic irq
Actually it's a i450kx/gx.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
Ok, i wanted to install DeMuDi, dowloaded the RAW-file and wrote it to a CD. B
ut because the CD was not bootable i just created Boot-Disks from the rescue.b
in, root.bin and driver-1.bin in /dists/woody/main/disks-i386/3.0.0-200107-30
/images-1.44.
So far so good.
But when booting the rescue
On Mon, Dec 10, 2001 at 02:35:53AM +0800, Pablo Puerro wrote:
Ok, i wanted to install DeMuDi, dowloaded the RAW-file and wrote it to a CD. B
ut because the CD was not bootable i just created Boot-Disks from the rescue.b
in, root.bin and driver-1.bin in
Sorry, I'am new of the list,
I've a Acer Travel Mate 613 TXV with no floppy controller,
when I boot for the installation of my Debian, the system stops after
the line:
floppy0: no floppy controller found
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
I've tested Debian rev3, rev4 Woody and SID.
The
On Tue, Dec 04, 2001 at 02:44:51PM +0100, Osvaldo wrote:
Sorry, I'am new of the list,
I've a Acer Travel Mate 613 TXV with no floppy controller,
when I boot for the installation of my Debian, the system stops after
the line:
floppy0: no floppy controller found
md driver 0.36.6 MAX_MD_DEV=4,
Processing commands for [EMAIL PROTECTED]:
retitle 113239 [i386] booting from DOS
Bug#113239: boot problem
Changed Bug title.
tags 113239 + potato
Bug#113239: [i386] booting from DOS
Tags added: potato
tags 113239 + moreinfo
Bug#113239: [i386] booting from DOS
Tags added: moreinfo
thanks
I´m Ricardo Gastón
Salomone, and yesterday I tried to install Debian 2.1 in my computer but I
couldn´t.
Following this, It
is the detail of the boot part. After the message "DC390: 0 adapters Found" the
systems hangs. The computer stops there. It didn´t tell me what´s the
problem.
I´m Ricardo Gastón
Salomone, and yesterday I tried to install Debian 2.1 in my computer but I
couldn´t.
Following this, It
is the detail of the boot part. After the message "DC390: 0 adapters Found" the
systems hangs. The computer stops there. It didn´t tell me what´s the
problem.
#include hallo.h
Ricardo Gastón Salomone wrote on Mon Aug 27, 2001 um 10:06:35AM:
I´m Ricardo Gastón Salomone, and yesterday I tried to install Debian 2.1 in
my computer but I couldn´t.
LOL. 2.1 has been released years ago, you cannot expect it running with
the brand-new hardware without
On Sun, May 13, 2001 at 03:30:56PM +1000, Robert Butler wrote:
Problem is I can't press that Continue button, so have never gotten past
this screen. No response to any keyboard or mouse commands from this screen,
including Ctrl-alt-delete: I have to reboot via the reset button. Of course
it
Hi,
I wonder if anyone could help me with an installation problem. I'm trying to
install Debian 2.2r2 from CD onto an AMD based PC. This is a completely
empty drive I'm installing to.
So far I have seen the black screen with the help pages (and read them),
pressed enter, seen lots of info whizz
"Kevin L. Gross" [EMAIL PROTECTED] writes:
Hi,
My Penguin Relion was running RedHat6.2 when I purchased the system.
I upgraded to RedHat7.0 with no problems.
I just purchased a Debian2.2_r2 CD set and booted directly off the
CD. The boot process hangs after the last line shown here:
Adam Di Carlo [EMAIL PROTECTED] writes:
"Kevin L. Gross" [EMAIL PROTECTED] writes:
Hi,
My Penguin Relion was running RedHat6.2 when I purchased the system.
I upgraded to RedHat7.0 with no problems.
I just purchased a Debian2.2_r2 CD set and booted directly off the
CD. The
Hi,
My Penguin Relion was running RedHat6.2 when I purchased the system.
I upgraded to RedHat7.0 with no problems.
I just purchased a Debian2.2_r2 CD set and booted directly off the
CD. The boot process hangs after the last line shown here:
megaraid:v1.11 (Aug. 23, 2000)
megaraid: found
Adam Di Carlo wrote:
Glenn McGrath [EMAIL PROTECTED] writes:
Adam Di Carlo wrote:
Glenn McGrath [EMAIL PROTECTED] writes:
I just tested the 2.2.17-ide and 2.2.18-ide kernels and they both detect
a HPT370 chip
Where does this lead us? Are you saying the HPT370
Glenn McGrath [EMAIL PROTECTED] writes:
I just tested the 2.2.17-ide and 2.2.18-ide kernels and they both detect
a HPT370 chip
Where does this lead us? Are you saying the HPT370 problems should be
fixed as of 2.2.18-ide (as opposed to 2.2.18pre21-ide which we are
using now)?
--
.Adam
Adam Di Carlo wrote:
Glenn McGrath [EMAIL PROTECTED] writes:
I just tested the 2.2.17-ide and 2.2.18-ide kernels and they both detect
a HPT370 chip
Where does this lead us? Are you saying the HPT370 problems should be
fixed as of 2.2.18-ide (as opposed to 2.2.18pre21-ide which we
I just tested the 2.2.17-ide and 2.2.18-ide kernels and they both detect
a HPT370 chip
Glenn
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Glenn, you sent this followup to the wrong place. Resending.
Glenn McGrath [EMAIL PROTECTED] writes:
Acording to www.linux-ide.org hpt370 should be supported under the 2.2
series fo kernels, the first patch i see was to 2.2.16, so it should be
integrated with anything above that.
HPT370
D]
Subject: UDMA66 boot problem/HPT370
Date: Tue, 12 Dec 2000 21:46:46 +0100
When I try installing Debian 2.2r2 on my HPT370 Raid/UDMA100 controller, with the
UDMA66 boot floppies, the system halts during the boot process. ...
...
Abit KT7-Raid Motherboard
...
Jon Branch wrote:
Hi Alexander
Sorry no solution from me. I'm faced with a near identical problem using the HPT 370
on-board controller with a 2theMax BX7 +100 motherboard (actually with five of them).
So I'll be interested to see the solution if/when you get one.
Regards
I read up
Debian Bug Tracking System wrote:
Processing commands for [EMAIL PROTECTED]:
reassign 79459 boot-floppies
Bug#79459: UDMA66/HPT370 boot problem
Bug reassigned from package `disks-i386' to `boot-floppies'.
--
Stopping processing here.
Please contact me if you need assistance
Grzegorz Bieszczak [EMAIL PROTECTED] writes:
I am trying to install Debian 2.2 r0. While the first boot to start
installation system hangs after the line:
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
I was able to install on this computer Redhat 7 and Mandrake 7.2, so
the
problem seems to be
On Sun, Dec 17, 2000 at 04:43:49PM +0100, [EMAIL PROTECTED] wrote:
Grzegorz Bieszczak [EMAIL PROTECTED] writes:
I am trying to install Debian 2.2 r0. While the first boot to start
installation system hangs after the line:
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
[...]
Hardware
On Sun, Dec 17, 2000 at 04:07:05PM +0100 , Marcin Owsiany wrote:
On Sun, Dec 17, 2000 at 04:43:49PM +0100, [EMAIL PROTECTED] wrote:
Grzegorz Bieszczak [EMAIL PROTECTED] writes:
I am trying to install Debian 2.2 r0. While the first boot to start
installation system hangs after the
On Sun, Dec 17, 2000 at 05:45:01PM +0100, Petr Cech wrote:
On Sun, Dec 17, 2000 at 04:07:05PM +0100 , Marcin Owsiany wrote:
If you have read the documentation, you would know that there
are 4 'flavors' of kernels in Debian. One of them only has
No. The standard one has almost all SCSI
On Sun, Dec 17, 2000 at 10:19:16PM +0100, [EMAIL PROTECTED] wrote:
The problem is that I can't even get into installation
program to choose kernel.
You don't choose the kernel in the installation program. There
are four kinds of installation sets, with four different
kernels. If you have
Grzegorz Bieszczak [EMAIL PROTECTED] writes:
I am trying to install Debian 2.2 r0. While the first boot to start
installation system hangs after the line:
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
I was able to install on this computer Redhat 7 and Mandrake 7.2, so the
problem seems to
be
interested to see the solutionif/when you get one.
Regards Jon Branch
--Original Message-- From: "Alexander Sawallich"
[EMAIL PROTECTED] To: debian-user [EMAIL PROTECTED], debian-boot[EMAIL PROTECTED] Sent: December 12, 2000 8:46:46 PM GMT
Subject: UDMA66 boot problem/HPT37
When I try installing Debian 2.2r2 on my HPT370 Raid/UDMA100
controller, with the UDMA66 boot floppies, the system halts during the boot
process. Why? Thnanks for any help. I´m sorry this description got so long, but
if someone really wants to help he might need some of the info below.
I´m
When I try installing Debian 2.2r2 on my HPT370 Raid/UDMA100 controller, with
the UDMA66 boot floppies, the system halts during the boot process. Why? Thnanks
for any help. I´m sorry this description got so long, but if someone really
wants to help he might need some of the info below.
I´m
Processing commands for [EMAIL PROTECTED]:
reassign 79459 boot-floppies
Bug#79459: UDMA66/HPT370 boot problem
Bug reassigned from package `disks-i386' to `boot-floppies'.
--
Stopping processing here.
Please contact me if you need assistance.
Darren Benham
(administrator, Debian Bugs
Processing commands for [EMAIL PROTECTED]:
reassign 79092 boot-floppies
Bug#79092: boot problem
Bug reassigned from package `boot -cd' to `boot-floppies'.
--
Stopping processing here.
Please contact me if you need assistance.
Darren Benham
(administrator, Debian Bugs database
Hello...
My name is Darshan and I was broswing the web for a solution to my problem,
when I came across a message board, which had your email addresses.
I have a Pentium III 500 in which I have 2 operating systems. I have
partioned my drives and I am running windows 98 as my mine and linux
n Fri 03 Nov, Tim Veazey wrote:
Hello,
I've just attempted to install debian for the first time (new to the
linux world too). The installation seems to go ok. However, when it
comes time to reboot, the system freezes after the following boot
message:
"Setting the System Clock using
Hello,
I've just attempted to install debian for the first time (new to the
linux world too). The installation seems to go ok. However, when it
comes time to reboot, the system freezes after the following boot
message:
"Setting the System Clock using the Hardware Clock as a reference..."
The
Tim Veazey wrote:
Hello,
I've just attempted to install debian for the first time (new to the
linux world too). The installation seems to go ok. However, when it
comes time to reboot, the system freezes after the following boot
message:
"Setting the System Clock using the Hardware
Hi!
I've performed a standard installation with Debian 2.2.
MBR installed /dev/hda (/boot mounted on /dev/hda1 which is 100MB)
PC with Amibios v1.5 1995-12-19, Pentium 133, Disk 1,2GB
and I have the following messages which appears (not the same message at
each reboot, random..which is very
"Adam" == Adam Di Carlo [EMAIL PROTECTED] writes:
Adam Sorry we haven't been able to help you here.
Adam The only time I've heard of another reporting this problem, it was bad
Adam memory in the machine. You might try a memory scrubber.
Adam This is a hardware/kernel problem
Sorry we haven't been able to help you here.
The only time I've heard of another reporting this problem, it was bad
memory in the machine. You might try a memory scrubber.
This is a hardware/kernel problem -- not much we can do about it in
this group.
--
.Adam Di [EMAIL
Package: boot-floppies
Version: 2.1.8-1999-02-22
architecture: i386
model: Systemax, Athlon 550Mhz
memory:128MB
scsi: None
cd-rom:ATAPI*2
network card: None
pcmcia:None
During intallation boot, my system hangs. The last kernal message is:
md driver
Hi Guys,
We are having a problem getting Linux to boot on an Industrial Computer
Source SB586P(V) Rev(C) computer board. The SB586 has a 100 Mhz Pentium
and uses American Megatrent BIOS (1994, the latest version for this
board).
The system has 30 meg of main memory and is using the on-board
89 matches
Mail list logo
