Package: libftdi0
Version: 0.7-1
Severity: minor
Tags: patch
The URL where the source can be downloaded has changed.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/dash
Severity 401820 grave
Tags 401820 + patch
thanks
Justification: Renders package (almost) unuseable, and this is not good
for edge. (If after resume, like using powersaved, changes are high,
this will give no working graphics at all...)
Subject: 915resolution: Patch works
Followup-For: Bug
Package: fetchmail
Version: 6.3.6~rc3-1
Followup-For: Bug #262257
REOPENING, because bug is still there!
#apt-cache show fetchmail | grep -e Version: -e Conflicts:
Version: 6.3.6~rc3-1
Conflicts: popclient, fetchmail-common, logcheck ( 1.1.1-9),
fetchmail-ssl (= 6.2.5-12)
-- System
Package: debian-policy
Version: 3.7.2.2
Severity: wishlist
Looking at #262257, as an exampple, there are packages which declares
conflicts for whatever reason. However, the reason is NOT, that thec
packages could not co-existent on the same system (For the example,
retchmail could be also
Severity: wishlist
thanks
Sorry for interfering, but why do you think this is RC-critical?
___
Viren-Scan für Ihren PC! Jetzt für jeden. Sofort, online und kostenlos.
Gleich testen!
severity 392524 wishlist
thanks
Mhpf... Forgot to edit command
___
Viren-Scan für Ihren PC! Jetzt für jeden. Sofort, online und kostenlos.
Gleich testen! http://www.pc-sicherheit.web.de/freescan/?mc=02
merge 392540 392541
thanks
--
++[-]+++.
++.---.--...+++.---..+.+.---.
-. +++.
PGP-KeyID: 0x0DBDCA9B
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Package: mediawiki1.7
Followup-For: Bug #392941
I think, this bug is originated in bad dependency, and therefore
a seroius Debian Policy Violation.
If you think, that mediawiki-1.5 and mediawiki-1.7-xxx shoould not
be installed together, they have to conflict.
But as a debian maintainer, you
Package: mediawiki
Severity: serious
Justification: Violation of Debian Policy 3.3
The address is [EMAIL PROTECTED]
and as it showed up in bug #392941, this is a -private- member-only
email list, which can -- and did in 392941 -- can bounce.
-- System Information:
Debian Release:
Package: xserver-xorg-video-i810-modesetting
Version: 1.6.5.git20061014.ac1-1
Severity: important
After X is started. switching back to a text console (Ctrl+F1 as
example), the text console just flickers and is completly unusable.
(However, the console is responsible, so a blind login works..
Package: aptitude
Version: 0.4.2-1
Severity: normal
If running aptitude -u as regular user, and then pressing enter on the
prompt become root, it segfaults.
If run as root, it is fine and works.
Also, if run as regular user without -u, and then pressing u it
works too.
Attached is a strace of
Package: bacula-doc
Version: 2.4.2-1
Severity: wishlist
I think, it should be possible to install the docs without the package: In my
case, bacula is running on a different machine, and I only need the doc package
as refernce.
Thank you!
-- System Information:
Debian Release: lenny/sid
APT
Package: bacula-director-mysql
Followup-For: Bug #441995
Hi, I just ran into the same issue...
As discussed if the removal of the offending statement is a fix, I'd
like to add my 2 cents: IMHO the removal of the USE ...; statement is a fix.
Looking at [1], it states:
you do not need to create
Package: bacula-director-mysql
Followup-For: Bug #441995
I looked into these packages:
cacti jffnms mydms ndoutils-mysql otrs2 phpwiki pixelpost
prelude-manager roundcube
and *every* package did not USE in the dbcommons-install scripts.
They all assume that the database is already
Package: firmware-iwlwifi
Version: 0.12
Severity: normal
Latley, the WiFi stops working frequently.
in this context, dmesg tells something like:
iwl3945: Microcode SW error detected. Restarting 0x8208.
iwl3945: Error Reply type 0x0005 cmd REPLY_TX (0x1C) seq 0x022A ser
0x004B
the same error.
XFS is known to have problems on ARM. We put the following fix into
the 2.6.26-1 kernel:
* [arm] xfs: pack some shortform dir2 structures for the ARM old ABI
architecture (closes: #414932).
But even with this fix there are problems, as reported by Tobias Frost
here
Package: libfcgi-dev
Version: 2.4.0-7
Severity: important
The file quotes:
* This file contains proprietary and confidential information and
* remains the unpublished property of Open Market, Inc. Use,
* disclosure, or reproduction is prohibited except as permitted by
* express written
Package: libfcgi0ldbl
Version: 2.4.0-7
Severity: normal
I trying to setup a fastcgi-interface using lighttpd. I used the tiny
example given in the libfcgi documentation. However, this example seems
to be faulty: The programm SIGSEVS whenever it tries to
getenv(SERVER_NAME).
Commenting out getenv
Package: cryptsetup
Version: 2:1.0.6~pre1-1
Severity: normal
I tried today to add another key, but cryptsetup fails, telling Can not
access device.
#cryptsetup isLuks /dev/sda3 echo it is
it is
(note: cryptsetup output edited, removed salt and uuid)
#cryptsetup luksDump /dev/sda3
LUKS header
found 460409 2:1.0.6~pre1-1
thanks
I downgraded to 2:1.0.5-1, and luksAddKey seems working again.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Yes, strace shows that the cause is the attempt to open the
device exclusive.
However, if the crypted partition contains the rootfs, luksClose
is quite uncool ;-)
On Sun, 2008-01-13 at 19:34 +0100, Gregory Colpart wrote:
Hello,
Same problem here.
My workaround is luksClose the partition
Package: libsane
Version: 1.0.19~cvs20071213-1
Severity: critical
Justification: breaks unrelated software
SYMTOMS:
After my recent upgrade, suddendly my (usb) mouse stopped resonding. An
investigation gave the evidence, that the /dev filesystem misses some
entries: The cause for the mouse stop
reopen 459424
reassign 459424 libsane
thanks
Justification: Debian Policy 3.5 and breaks system.
I do not habe libsane-extras installed, as this is only suggested.
Might it be the case, that your dependencies are not set up correctly
and libsane is indeed required than only suggested?
dpkg -l
:
reassign 459424 libsane-extras 1.0.18.13
close 459424 1.0.18.14
thanks
Tobias Frost [EMAIL PROTECTED] wrote:
I do not habe libsane-extras installed, as this is only suggested.
Might it be the case, that your dependencies are not set up correctly
and libsane is indeed required than only
Hi!
I saw that you filed an ITP for navit.
As I unofficially packaged it already (A friend is upstream author of
navit, and I did him the favour), maybe you might be interested in
the effort I already put in?
I will upload the source package later this evening to my site...
Well, I'll put a
Package: gnome-screensaver
Version: 2.20.0-2
Severity: normal
Not reproducable, but at a frequent level, I get the following
behaviour:
After the screen is (auto-)locked, i press the shift key to login again.
But sometimes the login screen is not appearing. However, the keystroke
is
Package: ebook-dev-alp
Version: 200407-1
Severity: wishlist
Please do not store the ebook as .gz. Is just unconfortable to
decompress it first before you can use it.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Package: smartmontools
Version: 5.37-6
Severity: normal
I think, smartmontools post-install should not fail, if the /etc/init.d/
script fails for whatever reason... (Correct me, if you are of another opinion)
snip
0 packages upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
Need to
Package: ipw2100-source
Version: 1.1.0-1
Severity: minor
The installed file has the following attributes:
-rw-r--r-- 1 root root 114028 2005-03-26 18:41 ipw2100-source.tar.gz
Please note, that the date is March 26. This leads (at least in my
case) to confusion, if it is really the newest
Package: avr-libc
Version: 1:1.4.6-2
Severity: important
Justification: fails to build from source
build fails while generating documentation. I did not investigate the
reason, but I think it is a missing dependency.
cd latex_pdf_src make refman.pdf
make[5]: Entering directory
Package: e2fsprogs
Version: 1.40.2-1
Severity: minor
File: /sbin/fsck
My mainboard has a little problem: Rarely, it manipulates its clock to a
date in the future. Also it did today: It set the time to Oct 16.
So I rebooted to fix the date in the bios...
After the change, I booted as normal but
wrote:
On Tue, Oct 09, 2007 at 09:08:16PM +0200, Tobias Frost wrote:
Package: e2fsprogs
Version: 1.40.2-1
Severity: minor
File: /sbin/fsck
My mainboard has a little problem: Rarely, it manipulates its clock to a
date in the future. Also it did today: It set the time to Oct 16
Package: openssh-client
Version: 1:4.6p1-5
Severity: normal
Issuing e.g:
scp -r [EMAIL PROTECTED]:/sbin .
[EMAIL PROTECTED]'s password:
Segmentation fault
heres the last lines of the strace, reading of the password removed.
stat64(., {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
read(7,
tags 406825 upstream
retitle 406825 rt2500-source: rt2500 fails to build in kernel2.6.20-rc5
thanks
Retitle:
I used rc5 not rc3.
(This was a typo...)
Upstream
I filed the bug in the projects BTS at sf.net
PS: why it is marked done?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
tags 406825 upstream
retitle 406825 rt2500-source: rt2500 fails to build in kernel2.6.20-rc5
thanks
Retitle:
I used rc5 not rc3.
(This was a typo...)
Upstream
I filed the bug in the projects BTS at sf.net
PS: why is the bug marked done?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Subject: fetchmail: Submitting Patch, Correcting tags
Followup-For: Bug #262257
Package: fetchmail
Version: 6.3.6~rc3
As the package is not yet uploaded, I built the package locally.
Attached is the patch I used for that. It only fixes the problem.
(As a suggestion, one could also add popclient
Package: gramofile
Version: 1.6-7
Severity: minor
Tags: patch
As wodim is now replacing cdrecord in debian, please update your
debian/config file, and allowing to remove the transitional package
cdrecord
Attached is a patch, which will update the debian/control file.
NOTE: I'm working on a
of cdrecord in the source and
documentation.
+# This includes removing a link to a (not existing anymore) site of Schilling.
+#
+# Also changes the packagefile to suggest wodim instead of cdrecord.
+#
+# by Tobias Frost, [EMAIL PROTECTED], 12-31-2006
+#PATCHOPTIONS -p1
+
+diff -pur -p1 gramofile-1.6
Package: gramofile
Version: 1.6-7
Followup-For: Bug #405101
Please disregard the prevoius patch. I did the patch in the wrong file,
as I was blind to see that you use dpatch...
Well, here is the complete patch, removing all (but one in the TODO)
occurence of cdrecord.
The patch modified two
Package: eterm
Version: 0.9.4.0debian1-2
Severity: important
Seems that the file-parameter is not io...
Also, it seems, that the programm lacks to check for the result, as it
does not fail (it also ask the question, but does not wait for user input).
Exit-Code is also 0 even if a failure
Just a question: Is the bug fixed or not...
The changelog implies, that it is, so can we close that bug then?
Or is this still an issue?
_
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Package: mp3check
Version: 0.8.0-4
Severity: grave
Justification: causes non-serious data loss
Using mp3check to remove junk deletes id3-info, even if it tells not to
so. Can it be, that in retrying the junk-end detection, the
id3-detection fails, or the restoring of the id-tags fails?
Here's
Package: mp3check
Version: 0.8.0-4
Followup-For: Bug #399047
I found the bug, and here's the patch.
Also, upstream will be informed...
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386
tags 399047 -upstream
thanks
I have to correct the upstream tag, as this is not in upstream.
looking at mp3check_0.8.0-4.diff.gz, this is where the bug was introduced.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
,
On Fri, Nov 17, 2006 at 05:00:34PM +0100, Tobias Frost wrote:
I have to correct the upstream tag, as this is not in upstream.
looking at mp3check_0.8.0-4.diff.gz, this is where the bug was introduced.
Looking at the package changelog, it seems this change was introduced
Package: aptitude
Version: 0.4.4-4
Severity: important
Now it happend a second time within a week, so time to file it as a bug.
I invoked aptitude update; aptitude -i and after the update, the
following assertion failed:
Nicht gefangene Ausnahme:
Package: dvdrtools
Version: 0.3.1-1
Severity: normal
aptitude throws:
dpkg: Fehler beim Bearbeiten von
/var/cache/apt/archives/dvdrtools_0.3.1-2_i386.deb (--unpack):
Versuche, »/usr/bin/cdda2wav« zu überschreiben, welches auch in Paket
cdda2wav ist
(Translation:
Package: linux-image-2.6.20.3
Version: 3
Severity: normal
If initramfs-tools are installed, the kernel fails to install with this
message:
Setting up linux-image-2.6.20-1-k7 (2.6.20-3) ...
Running depmod.
Finding valid ramdisk creators.
Failed to find suitable ramdisk generation tool for kernel
retitle 421078 linux-image-2.6.20: Does not find initramfs-tools
thanks
Correcting typo in title
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: avr-libc
Version: 1:1.4.5-3
Severity: minor
With the latest package -- though stating in the changelog that they
have been rebuilt against the newest binutils-avr -- the support for
the AT90PWMx devices is missing.
(Maybe avr-gcc was not up-to-date, that is supporting the new devices
retitle 420061 avr-gcc: Please update to 4.1.x with new devices patch
thanks
I think we talked offline about it: As the new devices patch should be
also apply to 4.1.1, it would be very helpful for sid, and maybe you
could do a 4.1.2 for experimental? ( for the braves )
Tobi
--
severity 421088 wishlist
blocked 421088 by 420061
thanks
Well, you're right... avr-gcc is not updated yet.
gcc 4.1.1 will support the new devices as soon as the newdevices patch
is applied. I marked the bug blocked by the related avr-gcc bug.
Am Donnerstag, den 26.04.2007, 13:06 +0200 schrieb
Package: dbs
Version: 0.42
Severity: wishlist
Tags: patch
I currently prepare a patch for the avr-gcc FTBFS #421142. The build
fails, because the source-dir contains a link to a archive located in
outside of the source-tree, but install with a different package
(gcc-4.1-source).
However, if
Subject: gcc-avr: Patch to fix the FTBFS (at least almost)
Followup-For: Bug #421142
Package: gcc-avr
I made a patch to fix the FTBFS.
- debian/control : adapted the build-depends to depend against the right
gcc-source (the original would also match to 4.1.2, which is in
experimental
The dbs has been patched, therefore, it is now possible to build the
package.
Please use the new (attached) patch, as this also updates build-depend
against the new dbs.
Best regards,
Tobi
--
++[-]+++.
:1.4.5-3) unstable; urgency=low
+
+ * debian/control: changed build-depends to fix FTBFS
+
+ -- Tobias Frost [EMAIL PROTECTED] Wed, 18 Apr 2007 15:21:32 +0100
+
avr-libc (1:1.4.5-2) unstable; urgency=low
* Convertion to debheler fixed (closes: #398220)
diff -Naur avr-libc-1.4.5.orig/debian
Package: avr-libc
Version: 1:1.4.5-3
Severity: normal
Tags: patch
In the include file for the at90pwm devices, in the register PLLCSR,
one bit has the wrong name.
According the datasheet (Atmel document id 4317H–AVR–12/06, page 36) bit
#2 should have the name PLLF, not PCKE.
The attached patch
I also filed the bug upstream.
http://savannah.nongnu.org/bugs/index.php?19650
Tobi
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
severity 420443 grave
thanks
Justification: Breaks whole mail subsystem. Neither send nor receive is
possbile. After sending server giving up, mail loss will occour. On not
proberbly configured mail servers, mail loss will occour after first
delivery attempt. (they exists: my univeristy has one)
Package: avr-libc
Followup-For: Bug #420163
The attached patch addes these Bits to the register ADCSRB
ADHSM 7 /* ADC High Speed Mode */
ADTS3 3 /* ADC Auto Trigger Source 3 */
Tobi
Filed upstream as bug #19666
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT
found 420163 1:1.4.5-2
thanks
Correction of the version... 1.4.5.3 is my local generated package.
--
++[-]+++.
++.---.--...+++.---..+.+.---.
-. +++.
PGP-KeyID: 0x0DBDCA9B
--
To UNSUBSCRIBE, email to [EMAIL
Package: kdevelop3
Version: 4:3.2.0-3
Severity: grave
Justification: renders package unusable
kdelibs4 is not available anymore. This makes this package in
uninstallable or forces to uninstall due other updates.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
merge 326929 326883
thanks
Jeremy Laine [EMAIL PROTECTED] schrieb am 06.09.05 19:37:42:
Hi Tobias,
I submitted a similar bug today and sent a patch to build KDevelop 3.2.2 against
the latest Qt / KDE libs:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=326883
Jeremy
--
Package: kdessh
Version: 4:3.3.2-1
Severity: important
as now the ssh packets are split into openssh-client and openssh-server
packages, the dependencies should be changed to this packages
(maybe openssh-server as recommended, and openssh-client as required)
The ssh package itself is marked
Package: udev
Version: 0.062-3
Followup-For: Bug #317332
Severity: grave
The package should be name a dependecy on kernel-2.6.12
This fault can make a system unusable (think of remote machines.)
-- Package-specific info:
-- /etc/udev/rules.d/:
/etc/udev/rules.d/:
total 0
lrwxrwxrwx 1
Package: gnome-games-data
Version: 1:2.22.1.1-1
Severity: normal
Tags: patch
Got this via cron:
/etc/cron.monthly/scrollkeeper:
///usr/share/gnome/help/blackjack/el/blackjack.xml:402: parser error :
//Entity 'ΒοήΞεια' not defined
paraguimenuitemÎ
Package: monotone
Version: 0.39-1
Severity: wishlist
thank you for updateing.
(btw, at my computer, dpgk-buildpacake went trough withiout any error.)
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Package: xdm
Version: 1:1.0.1-6
Severity: normal
If xdm is restarted, e.g. via the /etc/init.d/xdm script,
any (valid) login fails. There is no error message, it looks like,
as xdm restarts the x-server after the login.
At the moment, my only known solution to the issue is a reboot.
Bug is
Package: vegastrike
Version: 0.4.3-4
Followup-For: Bug #359173
For me, it works, when disabling sound.
If sounds are enabled, I also experience the very same crash.
Maybe this is a sound-related crash?
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT
Package: cdrw-taper
Version: 0.3-6
Severity: wishlist
I prepared a patch to make cdrw-taper support DVD-RW (not only DVD+RW)
I upload the patch as soon as the BTS assigned a number to this bug, as
I want to inform upstream as well.
-- System Information:
Debian Release: testing/unstable
APT
Package: cdrw-taper
Version: 0.3-6
Followup-For: Bug #350111
Here is the patch.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/dash
Kernel: Linux 2.6.15
Locale: [EMAIL
Package: cdrw-taper
Version: 0.3-6
Severity: minor
Followup-For: Bug #350346
Unfortunatly you filled your bug without usage of reportbug,
so some infos are not there.
I have kernel 2.6.15 with udev. And the devfs setup works for me
even for udev-fs.
Please try this if you also have a udev
I think I was in error. Probably this bug was related to ftp-server load...
Therefore I close this bug.
__
XXL-Speicher, PC-Virenschutz, Spartarife mehr: Nur im WEB.DE Club!
Jetzt gratis testen!
I agree with Michael...
So as I stumbled about the topic, I thinks this should be wishlist if not
closed..
(Please change the tags if you are not of my opinion)
_
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer
Sounds like a low-priority debconf question.
In the first line, it is not a bug.
Anyway, I still oppose to making the default just shut down unless
you know how to handle it properly.
Also, the typical use case for
powersaved/kpowersave is a laptop user running KDE.
No, it's not. powersaved
severity 370817 grave
thanks
(Please appologize the severity, but I think it is not a good idea to
let this pacakge in testing without resolving this issue)
Also my printer (Espon Stylus 640) stopped working.
There is no error message in the logs.
(Just backend failed with status 1)
I did not
, this bug is related to #370834 (and all the merged)
and I also think that the new #372586 is related...
Because of thesee, grave is appropiate, according
the BTS.
Tobi
la, 2006-06-10 kello 13:46 +0200, Tobias Frost kirjoitti:
severity 370817 grave
thanks
(Please appologize the severity
Package: powersaved
Version: 0.12.18-1
Severity: normal
Tags: patch
On my system, the vbe-state-[save|restore] script is required to get the
display working again after S2R.
However, especially when theres load on the machine, reactivation of the
machine leads to corruption in
the kde's windows
Package: powersaved
Version: 0.12.18-1
Severity: important
powersave -U (S2D) seems to check for a kernel in /boot/vmlinuz.
But in debian, the running kernel is /boot/vmlinuz-(Version)
and there can be a sym-link /vmlinuz pointing to the kernel.
Therefore, the check fails, and suspend to disk
Package: boinc-manager
Version: 5.4.9-1
Severity: wishlist
If connecting, it would be feasable to make it possible to store
authentification information,
and there should be a support for multiple hosts.
This can be best done -- in linux flavour -- by using some configuration file
in the
Package: reportbug
Version: 3.20
Severity: grave
Justification: renders package unusable
On todays dist-upgrade, updating reportbug failed with this error message:
Errors were encountered while processing:
reportbug
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to
I had the same problem
Using update-alternatives, you can set the default editor for your
system...
It seems that on updating some package, the editor settings disapeared.
No idea, what it caused.
Best regards
Tobias
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Package: harden-clients
Severity: minor
The ssh package is a transitional package and replaced by
the openssh-client and openssh-server packagages.
Maybe it is a good idea to require these instead of ssh?
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT
Package: kernel-package
Version: 10.049
Followup-For: Bug #377267
I think, the patch is ok.
However, one could use = instead of := but
I do not see a difference. However, this could
be a feature, as it allows overriding.
However, I cannot find an issue, where a cleared kernel source
will fail
On Sun, 2008-04-20 at 10:24 -0500, Peter Samuelson wrote:
No, it's not an endian problem. i386, amd64, arm, and armel are _all_
little-endian.
MMmmh, I always thought arm and armel differs in endianess...
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
I'm not currently at that machine, but I neigther used compiz nor I have
a special PAM setup.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sun, 2008-04-06 at 15:26 +0200, Paul Menzel wrote:
$ gnome-screensaver-command --exit
$ gnome-screensaver --no-daemon --debug
Ctrl + a, c
$ gnome-screensaver-command -a
See no login-dialog, move mouse, enter some keys and then login under
tty? do
$ screen -dr
Maybe one
also my infos:
My external VGA connector is not in use and alos has been never used.
moria:/home/tobi#lspci | grep Graph
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation
I just missed the hint for #420339 to include in the prevoius mail.
There is a difference in my case: The screensaver works as usual,
showing its animations but suddendly it wilkl just freeze. Mostly, The
animation will stop and then
the bug is occuring.
Also seen, that the screen is blank
Package: adjtimex
Version: 1.23-1
Severity: important
When installing -- or invoking manually -- adjtimex segfaults on lenny/armel.
Regulating system clock...adjtimex: Invalid argument
for this kernel:
USER_HZ = 100 (nominally 100 ticks per second)
9000 = tick = 11000
-33554432 = frequency =
Package: adjtimex
Version: 1.23-1
Followup-For: Bug #471203
Attached is the strace
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: armel (armv5tel)
Kernel: Linux 2.6.24-1-iop32x
Locale: LANG=C, LC_CTYPE=C
. I Will install ist from
sid, and then send the strace log too.
On Mon, 2008-03-17 at 17:28 +0100, Alain Guibert wrote:
Hello Tobias,
On Sunday, March 16, 2008 at 17:53:44 +0100, Tobias Frost wrote:
When installing -- or invoking manually -- adjtimex segfaults on
lenny/armel.
Thank
The no-interrupts-fallback seems to do the trick:
thecus:~/debsrc/adjtimex-1.23#/adjtimex --compare=1 --verbose
opened /dev/rtc for reading
/dev/rtc doesn't allow user access to update interrupts
- using busy wait instead
waiting for CMOS time change
CMOS time Mon Mar 24 11:27:33 2008
(assuming
adjustment) = 1206794057
1206794078 5.851405 1764.5 1 0
On Sat, 2008-03-29 at 12:31 +0100, Alain Guibert wrote:
package adjtimex
retitle 471203 adjtimex: --directisa segfaults on armel
thanks
On Monday, March 24, 2008 at 12:38:59 +0100, Tobias Frost wrote
Package: kronolith2
Version: 2.2-1
Severity: important
On my Thecus N2100, an ARM machine, especially when the machine is under some
load,
the cron line starts up hundreds of php processes, because the previous one is
not finished.
I just got a load well above 100, and had severe problems to
Package: nut
Version: 2.4.3
Severity: wishlist
Please package the new version. It supports new UPSs and some bugfixes.
Thank you!
tobi
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386
Subject: Re: backuppc_nightly gets wrong parameter
Package: backuppc
Severity: normal
The bug is still there.
Maybe some additional information:
- It happened again when playing with the BackupPCNightlyPeriod Option
- This time I have more log files to show.
Log (excepts)
2011-02-26
Package: syslog-ng
Version: 3.1.3-3
Severity: normal
When adding the parameter -Q to /etc/default/syslog-ng like this
# Command line options to syslog-ng
SYSLOGNG_OPTS=--no-caps -Q /tmp/
/etc/init.d/syslog-ng (re)start fails with
Starting system logging: syslog-ngError parsing command line
Package: bacula-common
Version: 2.4.2-3.1
Severity: wishlist
File: bacula
Please update the version in debian to 2.4.3
Please also enable the build of bat
Thank you!
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1,
Package: dovecot-imapd
Version: 1:1.2.7-1
Severity: normal
I installed squirrelmail on my NAS system. After installing I get this message
in squirrelmail:
ERROR: Could not complete request.
Query: LSUB *
Reason Given: [SERVERBUG] Internal error occurred. Refer to server log for more
1 - 100 of 4160 matches
Mail list logo
