Re: WiFi Not Working After System Reinstallation

Both systems are fully updated Bullseye on a laptop. I have two access points, let's call them A and B. When I connect to A, DHCP does not work. When I connect to B, DHCP works, laptop gets an IP address and internet works without problems. On the other hand, my mobile phone can

WiFy Not Working After System Reinstallation

Hi all, my wireless network interface is not working after system reinstallation. Before it was working perfectly. It cannot get an IP address from DHCP. Also, when I assign to it and IP address manualy, it's not working. The wired interface is working perfectly. Itried with both

Re: mic issues after upgrade to Debian 11

On Sat, 9 Oct 2021 13:21:51 + (UTC) L Dimov wrote: > > > On Tuesday, October 5, 2021, 1:14:48 PM EDT, Marko Randjelovic > wrote: > > On Tue, 5 Oct 2021 13:58:35 + (UTC) > L Dimov wrote: > > > My mic used to work fine under Debian 9 and

Re: mic issues after upgrade to Debian 11

On Tue, 5 Oct 2021 13:58:35 + (UTC) L Dimov wrote: > My mic used to work fine under Debian 9 and 10, but after upgrading to 11, > people tell me that the audio coming out of my mic is really scratchy and bad > to the point where if I do a video call, I'd have to use the phone for the >

Re: Up-to-date Bullseye, Power Save turned Samsung T55 Monitor off. Couldn't wake it up

On Sat, 2 Oct 2021 15:48:39 -0400 Kenneth Parker wrote: > HP Elitedesk 705 G1. Bullseye XFCE. > > I had a timeout set like usual. Before, I could jiggle the Mouse and press > the Shift Key and it would wake up, but not today. > > Fortunately, I was able to power up a Laptop, and SSH into the

Re: Sound input source detected but not capturing

On Sat, 04 Sep 2021 07:47:02 +0530 Pankaj Jangid wrote: > Marko Randjelovic writes: > > > Did you make sure: > > > > 1. correct device is set to record from > > 2. recording is enabled > > 3. input volume is large enough > > I guess I have only

Re: Sound input source detected but not capturing

On Fri, 3 Sep 2021 20:48:52 +0200 Marko Randjelovic wrote: > If you are not sure send the output of command 'amixer' so we can check. In fact, unless you have only one sound device, the command should be 'amixer -cN' where N is the number of your sound card and can change after reboot. So fi

Re: Sound input source detected but not capturing

On Fri, 03 Sep 2021 22:52:45 +0530 Pankaj Jangid wrote: > I have a fresh Bullseye installation on a laptop. Sound output is > working. But the input is not working. The device is detected. > > --8<---cut here---start->8--- > $ arecord -l > List of

Re: WiFi turned off

On Thu, 5 Aug 2021 10:30:42 +0300 Gunnar Gervin wrote: > Hi again, experts. > Please advice how fix it. > WiFi gone. > I used ethernet cable to reinstall Debian i386 32b Buster. Now WiFi won't > turn on. In Xfce desktop "Advanced Network Manager" shows the WiFi > provider, but "Save" button's

Re: Thunderbird problems

On Mon, 14 Jun 2021 23:22:41 -0400 Frank McCormick wrote: > I filed a bug report with Mozilla. Perhaps I should do the same with Debian? Of course, Mozilla cannot solve Debian bugs and it looks like the bug is from Debian. It is possible the bug is from Thunderburd (not Mozilla as Thunderbird

Re: Battery drain with poweroff

Hi all, On Mon, 8 Feb 2021 13:26:12 +0100 Nicolas George wrote: > Now I need a way to apply it; apparently I need some way to boot > Windows. I hope I will not need to overwrite the complete drive with the > backup image I made. There is a program named 'flashrom' in Debian, but I don't know

Re: NULL pointer dereference

On Sat, 19 Dec 2020 17:13:13 +0100 Grzesiek Sójka wrote: > Hi there, > > I found the following in my "server" log: > > == > > BUG: unable to handle kernel NULL pointer dereference at 0008 > PGD 0 P4D 0 > Oops: [#2] SMP PTI > CPU: 5

Re: Installing Debian 10 from flash drive [NO network]

On Sat, 21 Nov 2020 09:11:18 -0600 Richard Owlett wrote: > On 11/20/2020 10:56 AM, Marko Randjelovic wrote: > > On Fri, 20 Nov 2020 09:35:04 -0600 > > Richard Owlett wrote: > > > >> > >> I attempted to install gparted using Synaptic. > >> Th

Re: Installing Debian 10 from flash drive [NO network]

On Fri, 20 Nov 2020 09:35:04 -0600 Richard Owlett wrote: > > I attempted to install gparted using Synaptic. > The message received was: > > "Please insert the disk labeled: > Debian GNU/Linux10.0.0_Buster_-Official amd64 DVD > Binary-120190706-10:24 > in drive /media/cdrom/" > > What is the

Re: Juk hangs after launch

On Sat, 26 Sep 2020 14:09:28 +0200 (CEST) local10 wrote: > Hi, > > Installed a kernel update and soft-rebooted the system to load the new kernel > while juk was playing. After the system came back, juk cannot be launched, it > just hangs and cannot even show its initial window properly. When

Re: query about kernel, download options, sessions

On Tue, 8 Sep 2020 10:45:41 + nenu crok wrote: > i am privacy freak, hence not using android. however, after seeing size of > libreoffice, is there any way an option to download only small portion. i > have overheard aboout similar option in our os debian. this is must, only > metered

Re: virt-install returns error

On Tue, 1 Sep 2020 21:57:59 -0500 Charles Zeitler wrote: > [27901.892175] audit: type=1400 audit(1599004754.496:57): > apparmor="DENIED" operation="open" > profile="libvirt-845413b9-8775-499f-bfaa-bf583e4040ae" > name="/sys/devices/system/node/" pid=9 comm="qemu-system-x86" >

Re: stretch uefi install ends up with no framebuffer for console

On Fri, 17 Jul 2020 16:45:33 + rbraun204 wrote: > Hey all, i'm installing stretch onto a HP Z4G4 workstation via > netboot and in uefi mode. The only video hardware in the box is a > NVIDIA Corporation GP107GL [Quadro P620]. The install goes as > expected. Only installed standard utils

Re: which package to file a bug against?

Hi Matt Zagrabelny, On Sat, 20 Jun 2020 08:54:52 -0500 Matt Zagrabelny wrote: > Greetings d-u, > > I have a new-ish laptop and a pair of the function keys (screen > brighter/dimmer) are mapped to the wrong function (mic mute/unmute). > > Where should I look to file the bug? Use reportbug

Re: why flash fails for this web site?

On Sun, 21 Jul 2019 21:04:27 + (UTC) Long Wind wrote: > my firefox for stretch can display flash, for example: > http://www.10jqka.com.cn/flash/ > but it can't display > https://www.gtja.com/jccy/syhq.htmli can't see any error msg, the page is > blank > > my other stretch can display

Re: update to new kernel

On Wed, 8 May 2019 11:49:18 -0400 Default User wrote: > So, since > linux-image-4.19.0-5-amd64 - Linux 4.19 for 64-bit PCs > (signed) > seems to be available, why did updating not update the kernel from > linux-image-4.19.0-4-amd64 to linux-image-4.19.0-5-amd64? Because

Re: System in broken state after dpkg upgrade

On Wed, 07 Sep 2016 18:24:29 +0200 Sven Joachim <svenj...@gmx.de> wrote: > On 2016-09-07 17:13 +0200, Marko Randjelovic wrote: > > > On Wed, 07 Sep 2016 15:17:23 +0200 > > Sven Joachim <svenj...@gmx.de> wrote: > > > >> File a bug against dpkg. In the

Re: System in broken state after dpkg upgrade

On Wed, 07 Sep 2016 15:17:23 +0200 Sven Joachim wrote: > File a bug against dpkg. In the meantime, rebooting with the > "selinux=0" kernel parameter should give you a working dpkg. After rebooting with 'selinux=0' I reinstalled dpkg with success: dpkg -i

Re: System in broken state after dpkg upgrade

On Wed, 07 Sep 2016 15:17:23 +0200 Sven Joachim wrote: > This might be a bug in dpkg or in one of the libraries it depends on > (libselinux1 comes to mind). What are the versions of libselinux1 and > libpcre3 on your system? They are both latest jessie versions. --

System in broken state after dpkg upgrade

I have mixed wheezy/jessie system. When tried to upgrade cmake from jessie, apt pulled other packages including dpkg which gave error during configure: root@debian:~# apt-get -t jessie install cmake Reading package lists... Done Building dependency tree Reading state information... Done

Re: Problem upgrading libc6 on sid

On Mon, 1 Feb 2016 07:41:47 -0500 Brad Alexander wrote: > I have an openvz container that I am having a hard time upgrading libc6. > Whether I use dpkg -i, apt-get, or aptitude, I get the same result. > > (Reading database ... 56136 files and directories currently installed.)

Re: mencoder - Skipped and duplicate frames when recording from TV

On Sat, 02 Jan 2016 12:39:13 +0100 deloptes <delop...@yahoo.com> wrote: > Marko Randjelovic wrote: > > > Regarding hardware, I've said before reinstall everything was working, and > > nothing changed in hardware. I use libx264 and preset=ultrafast which is > > qu

Re: mencoder - Skipped and duplicate frames when recording from TV

Quoting deloptes <delop...@yahoo.com>: > Marko Randjelovic wrote: > > > I use Squeeze on this machine. It has TV card: > > Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder > > > > When recording from this TV card with mencoder, every 0.15s

Re: mencoder - Skipped and duplicate frames when recording from TV

On Sat, 2 Jan 2016 11:53:03 +0100 Marko Randjelovic <marko...@eunet.rs> wrote: > I eliminated all but essential options, but nothing changed. I can further try > only without audio to see if the problem is related to mixing audio and video. With 'noaudio' option, messages a

Re: mencoder - Skipped and duplicate frames when recording from TV

On Sat, 2 Jan 2016 13:36:12 +0100 Nicolas George <geo...@nsup.org> wrote: > > Marko Randjelovic wrote: > > > With 'noaudio' option, messages about skipped/duplicate frames do not > > > appear anymore and recorded file plays smoothlty, so appears that the > > &g

Re: mencoder - Skipped and duplicate frames when recording from TV

On Sat, 02 Jan 2016 14:03:27 +0100 Sven Arvidsson wrote: > Are you using the noskip options in mencoder? This is my standard command which always worked perfectly and now it doesn't. There were dropped frames from sometimes but uncomparably rarer and audio and video were well

Re: mencoder - Skipped and duplicate frames when recording from TV

On Sat, 02 Jan 2016 13:19:51 +0100 deloptes <delop...@yahoo.com> wrote: > Marko Randjelovic wrote: > > > On Sat, 2 Jan 2016 11:53:03 +0100 > > Marko Randjelovic <marko...@eunet.rs> wrote: > > > >> I eliminated all but essential options, but nothing

Re: mencoder - Skipped and duplicate frames when recording from TV

On Sat, 02 Jan 2016 16:00:13 +0100 Sven Arvidsson <s...@whiz.se> wrote: > On Sat, 2016-01-02 at 15:27 +0100, Marko Randjelovic wrote: > > This is my standard command which always worked perfectly and now it > > doesn't. There were dropped frames from sometimes but uncomparabl

mencoder - Skipped and duplicate frames when recording from TV

I use Squeeze on this machine. It has TV card: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder When recording from this TV card with mencoder, every 0.15s on average, a message is output from mencoder: 1 duplicate frame(s)! or Skipping frame! When playing recorded file,

Re: apt stuck at Reading database

Did you try apt-get udpate dpkg --configure -a apt-get -f install ? -- http://markorandjelovic.hopto.org One should not be afraid of humans. Well, I am not afraid of humans, but of what is inhuman in them. Ivo Andric, Signs near the travel-road -- To UNSUBSCRIBE, email to

Strange errors from SELinux when long listing directory (ls -l)

After I issue command ls -l in terminal, as normal user, one or more of this messages appear in syslog: mcstransd: Failed to get context of client process (pid=5390) mcstransd: Servicing of request failed for fd (5) When issue as root, nothing is logged. I notice nothing else related with this

Strange kernel error when doing make modules_install

I use Debian 7.8 with vanilla kernel 3.14 and grsecurity and when rebuildgin kernel in order to resolve problem from my previous post, I noticed this in syslog: Mar 23 09:48:24 wrk kernel: [ 2323.105145] [ cut here ] Mar 23 09:48:24 wrk kernel: [ 2323.105155] WARNING:

Re: Vetrinary software

On Mon, 23 Feb 2015 16:07:33 -0700 Bob Proulx b...@proulx.com wrote: http://blends.debian.org/med/tasks That is a set of tasks for the Debian Med project. The question Marko asked was what features did Emil need. Saying to look at the Debian Med tasks does not in any way answer the

Re: Vetrinary software

On Sun, 22 Feb 2015 03:50:38 -0600 Emil Payne ehspa...@yahoo.com wrote: I see a bunch of medical software, including Clinica GnuMed, that I can install. However, I don't see anything for veterinarians or animals. I'm basically looking for medical record software. Mostly home use, but we

Re: Suspicious file found in /dev/shm with Rkhunter

On Fri, 20 Feb 2015 11:47:02 +0100 Marko Randjelovic marko...@eunet.rs wrote: On Fri, 20 Feb 2015 09:44:27 +0100 Petter Adsen pet...@synth.no wrote: On Fri, 20 Feb 2015 08:18:37 +0100 Marko Randjelovic marko...@eunet.rs wrote: While trying to find out how to eliminate messages

Re: Suspicious file found in /dev/shm with Rkhunter

On Fri, 20 Feb 2015 09:44:27 +0100 Petter Adsen pet...@synth.no wrote: On Fri, 20 Feb 2015 08:18:37 +0100 Marko Randjelovic marko...@eunet.rs wrote: While trying to find out how to eliminate messages: Warning: Hidden directory found: /etc/.java Warning: Hidden directory found: /dev

Re: Suspicious file found in /dev/shm with Rkhunter

On Fri, 20 Feb 2015 12:42:13 +0100 Petter Adsen pet...@synth.no wrote: Odd. Did you (manually) delete the file first? rkhunter probably won't delete any files previous runs have created. Also, you could try to grab the latest version (1.4.2) from http://rkhunter.sourceforge.net/ and

Re: unattended-upgrades uncertainty with Unable to get Terminal Size

On Thu, 19 Feb 2015 08:41:33 +0200 Brent Clark brentgcl...@gmail.com wrote: Good day Guys I just installed and new to unattended-upgrades. Looking at the logs this morning I see the folllowing. cat /var/log/unattended-upgrades/unattended-upgrades-dpkg_2015-02-19_06\:48\:53.476190.log

Suspicious file found in /dev/shm with Rkhunter

While trying to find out how to eliminate messages: Warning: Hidden directory found: /etc/.java Warning: Hidden directory found: /dev/.udev Warning: Hidden directory found: /dev/.initramfs which are made by rkhunter every morning as cron job, one more message appeared (when ran

Re: Canon PIXMA MG 2922 and 64-bit Debian Wheezy

On Tue, 10 Feb 2015 17:26:38 -0500 brian br...@meadows.pair.com wrote: Hi all, Does anyone know of the whereabouts of a working driver for the Canon PIXMA MP 2922 printer/scanner/copier? I did check up before buying the printer, and indications were that the drivers from Canon Asia

Re: SSL error in (e)links(2) web browers

On Fri, 6 Feb 2015 23:08:29 -0700 Bob Proulx b...@proulx.com wrote: Marko Randjelovic wrote: When I use links2 or elinks web browsers on some websites when https is https://webmail.sbb.rs/ elinks does not complain about the site. This may be a bug in elinks as it may be ignoring

Re: SSL error in (e)links(2) web browers

On Thu, 5 Feb 2015 14:06:47 -0700 Bob Proulx b...@proulx.com wrote: Marko Randjelovic wrote: When I use links2 or elinks web browsers on some websites when https is protocol I get error Error loading ... SSL error and page is not loaded. This is probably due to the combination

SSL error in (e)links(2) web browers

When I use links2 or elinks web browsers on some websites when https is protocol I get error Error loading ... SSL error and page is not loaded. -- http://markorandjelovic.hopto.org One should not be afraid of humans. Well, I am not afraid of humans, but of what is inhuman in them. Ivo

Re: Is this a hacking attempt?

On Wed, 21 Jan 2015 08:56:33 +0800 Paul Wise p...@debian.org wrote: On Wed, Jan 21, 2015 at 2:42 AM, Marko Randjelovic wrote: Fortunately, this works, but there are sites where doesn't. Do you have any examples of sites that still need Flash? Obviously flash game sites still need

Re: Is this a hacking attempt?

On Tue, 20 Jan 2015 17:52:05 +0100 Vincent Deffontaines vinc...@gryzor.com wrote: Le 2015-01-20 12:40, Marko Randjelovic a écrit : I was running Wheezy Iceweasel with vanilla 3.14 kernel with grsec. I tried to play video on YouTube with gnash plugin but Iceweasel crashed with alike

Re: Upgrading from squeeze to wheezy

What happens when you run apt-get -f install? -- http://markorandjelovic.hopto.org One should not be afraid of humans. Well, I am not afraid of humans, but of what is inhuman in them. Ivo Andric, Signs near the travel-road -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org

Re: Machine hangs at boot

On Mon, 15 Dec 2014 14:37:10 +0400 German gentger...@gmail.com wrote: My machine hangs at boot, so i'd like someone to take a look at my log. Thanks http://pastebin.com/3crkJgnE 939. [ 34.070472] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro What's sda2? Looks like it has errors.

Re: How Not to Install systemd to Begin With.

On Sun, 14 Dec 2014 15:49:57 -0800 Patrick Bartek nemomm...@gmail.com wrote: After the lively debate here that replacing systemd after it's installed is not the same as not installing it in the first place: Here's the solution, more or less. Although, it seems, one will never be truly free

Re: Wheezy: mouse middle button issue

On Mon, 15 Dec 2014 15:07:52 +0100 Jerome BENOIT g62993...@rezozer.net wrote: Hello Forum ! Since a couple of day, the middle button of my magic mouse (USB) has experienced a major issue: I can more copy/past or open-in-new-tab. A deeper investigation with xev shows that button 2 is no more

Re: Strange problem with samba share, maybe dns related

On Mon, 17 Nov 2014 15:15:25 +0100 Cyril Alberts calbe...@afu.de wrote: Hello, today I realized a strange bug (maybe there is a reason for it but I dont know): All our employees have a directory/folder at our (wheezy-lts) server, which is for interchange. Everybody gets a folder with

Re: Unable too boot after fresh install of latest testing

On Tue, 11 Nov 2014 11:09:17 +0200 Jarle Aase j...@jgaa.com wrote: tried to install from /cdimage/weekly-builds/amd64/iso-cddebian-testing-amd64-kde-CD-1.iso (dd'd to a USB disk) when I ran into all these problems. Today I tried again with the latest debian-testing-amd64-CD-1.iso, using full

Re: Unable too boot after fresh install of latest testing

On Mon, 10 Nov 2014 10:16:59 +0200 Jarle Aase j...@jgaa.com wrote: I have been using testing for quite some time. Saturday, I upgraded to the latest version. That was a disaster. Eventually I gave up fixing the upgrade and performed a fresh install (with encrypted root file system). No

Re: APT: Failed to fetch cdrom://[Debian...

On Tue, 4 Nov 2014 11:49:47 + Darac Marjal mailingl...@darac.org.uk wrote: On Tue, Nov 04, 2014 at 09:14:04AM +0100, Marko Ranđelović wrote: I use Wheezy and I use DVD 1 in APT and http as well. DVD *is* working, but whenever I do 'apt-get update', I get and error: Ign

Re: APT: Failed to fetch cdrom://[Debian...

On Tue, 4 Nov 2014 09:14:04 +0100 Marko Ranđelović marko...@eunet.rs wrote: I use Wheezy and I use DVD 1 in APT and http as well. DVD *is* working, but whenever I do 'apt-get update', I get and error: Ign cdrom://[Debian GNU/Linux 7.7.0 _Wheezy_ - Official amd64 CD Binary-1

Re: Monitor does not turn on after suspend

On Sun, 19 Oct 2014 21:27:07 +1100 Scott Ferguson scott.ferguson.debian.u...@gmail.com wrote: On 19/10/14 02:54, Marko Ranđelović wrote: I use Wheezy on desktop computer. I use vesa driver for X because radeon is not working. After pm-suspend command, computer is like turned off, when

Re: wrong mount point after update

On Sun, 5 Oct 2014 13:00:15 +0100 José Silva jsantossi...@hotmail.com wrote: On 04/10/14 16:07, José Silva wrote: On 04/10/14 06:00, Marko Randjelovic wrote: On Sat, 4 Oct 2014 00:20:19 +0100 José Silva jsantossi...@hotmail.com wrote: On 03/10/14 23:44, José Silva wrote: Hello

Re: usb dvd drive does not mount automatically as it used to

On Sun, 5 Oct 2014 12:05:30 +0100 José Silva jsantossi...@hotmail.com wrote: Hello, My external dvd drive (usb) used to get automatically mounted on my jessie x64 / xfce, at /media/cdrom if I recall. It doesn't anymore, I guess due to updates I do daily. lsusb lists the device. I

Re: wrong mount point after update

On Sat, 4 Oct 2014 00:20:19 +0100 José Silva jsantossi...@hotmail.com wrote: On 03/10/14 23:44, José Silva wrote: Hello, On my Jessie x64, until today, I was used to my usb disks being mounted at /media/myuser/disklabel. After today's update, the first disk always get mounted at

Re: apt update problems

On Fri, 03 Oct 2014 22:17:42 -0400 Maureen L Thomas mthomas9...@tampabay.rr.com wrote: On 10/03/2014 03:07 AM, Andrei POPESCU wrote: On Jo, 02 oct 14, 19:59:15, Maureen L Thomas wrote: On 10/02/2014 07:19 PM, Brian wrote: On Fri 03 Oct 2014 at 00:15:32 +0100, Brian wrote: You have a

vsftpd with ssl

I installed vsftpd on Wheezy and am trying to make it work with ssl (ftps protocol). This is my config file: listen=YES anonymous_enable=NO local_enable=YES dirmessage_enable=YES use_localtime=YES xferlog_enable=YES nopriv_user=ftpsecure secure_chroot_dir=/var/run/vsftpd/empty

Re: vsftpd with ssl

On Mon, 29 Sep 2014 21:19:44 -0400 (EDT) Stephen Powell zlinux...@wowway.com wrote: I work with SSL-secured FTP regularly. First of all, let's get the terminology right. I'm glad to see that you used the term FTPS instead of SFTP. Many people have the two confused. SFTP is a file transfer

Re: Slight New Sound Problem

On Wed, 17 Sep 2014 21:32:27 -0500 Martin G. McCormick mar...@server1.shellworld.net wrote: Thanks for any constructive ideas. Did you try with another kernel? Kind regards -- http://markorandjelovic.hopto.org One should not be afraid of humans. Well, I am not afraid of humans, but of what

Re: Slight New Sound Problem

On Thu, 18 Sep 2014 06:14:00 -0500 Martin G. McCormick mar...@server1.shellworld.net wrote: Marko Randjelovic writes: Did you try with another kernel? Well, indirectly. As I mentioned, the system has always exhibited this behavior slightly for several years through a number

Re: how to reinstall bash

On Sun, 14 Sep 2014 13:29:15 +0800 lina lina.lastn...@gmail.com wrote: $ ls -l /bin/sh /bin/bash /bin/dash -rwxr-xr-x 1 root root 1029624 Aug 22 05:15 /bin/bash -rwxr-xr-x 1 root root 117176 Jan 10 2014 /bin/dash lrwxrwxrwx 1 root root 9 Sep 13 17:48 /bin/sh - /bin/bash Now it is

Re: Brainydeal Receipt Printer

On Mon, 8 Sep 2014 09:30:47 +0100 Brian a...@cityscape.co.uk wrote: [I have rearranged one of your responses to be on a separate line to the question] On Mon 08 Sep 2014 at 00:08:15 -0400, Ethan Rosenberg wrote: On 09/07/2014 04:26 PM, Brian wrote: Brian - You didn't say how

Re: Irony

On Sat, 9 Aug 2014 16:26:40 -0400 Steve Litt sl...@troubleshooters.com wrote: Hi all, Some of the reasons I switched my desktop from Ubuntu to Debian were: 1) To do more config by editor and less by magical binary program. 2) To get rid of gratuitous boot gunge (in this case Plymouth)

Re: manual Packages file download?

On Sun, 20 Jul 2014 15:52:53 +1000 Zenaan Harkness z...@freedbms.net wrote: I keep getting (tried 3 times now) this sort of error from my chosen mirror: --- 100% [15 Packages 9,119 kB/9,119 kB 100%] Err ftp://mirror.aarnet.edu.au sid/main amd64 Packages For me this mirror is working: Hit

Re: Pin package to any version, don't remove?

On Sat, 19 Jul 2014 21:58:13 -0400 The Wanderer wande...@fastmail.fm wrote: when an X not compatible with the newest available fglrx-driver is available, 'apt-get dist-upgrade' still tries to remove fglrx-driver. Then why don't you pin X? -- http://markorandjelovic.hopto.org Please make

Re: IBM ServeRAID 8k-l driver

On Tue, 10 Jun 2014 12:34:22 +0200 basti black.flederm...@arcor.de wrote: Hello, I have a IBM System X3550 with a IBM ServeRAID 8k-l RAID Controller. First of all I have build a RAID with the BIOS Raid-config and installed Debian. Now I need a management system to check if the raid is

Re: Post-installation: how to auto-configure network adapter (ie. enable internet access)?

On Sun, 1 Jun 2014 17:01:04 -0700 (PDT) Horatio Leragon hlera...@yahoo.com wrote: Did you mean that at the console, tty1, I type the following command? sudo apt-get install network-manager If you didn't unselect Desktop Environment during install, it's already installed. What do the

Re: How to find dirs with single item

On Fri, 30 May 2014 17:17:29 +1000 Chris Angelico ros...@gmail.com wrote: On Fri, May 30, 2014 at 3:38 PM, Marko Randjelovic marko...@eunet.rs wrote: On Thu, 29 May 2014 22:43:29 +0100 Clive Standbridge list-u...@tgstandbridges.plus.com wrote: find temp |sed 's|[^/]*$||' |sort |uniq -u

Re: Cloning hdds of different sizes

On Tue, 27 May 2014 21:15:45 -0700 Patrick Bartek nemomm...@gmail.com wrote: 8. Create a new grub.cfg: Use grub-mkconfig. 9. Install to MBR of the 300GB drive: Use install-grub. I use LILO, but make sure you install GRUB on your new (300GB) drive, use fdisk -l /dev/sd[a-z] to find what is

Re: How to find dirs with single item

On Thu, 29 May 2014 22:43:29 +0100 Clive Standbridge list-u...@tgstandbridges.plus.com wrote: find temp |sed 's|[^/]*$||' |sort |uniq -u This doesn't work on this directory. $ find cenovnici |sed 's|[^/]*$||' |sort |uniq -u cenovnici/comtel_2011-12-20/Aktivna mre�

Re: Security updates for hold package

On Wed, 14 May 2014 11:00:30 +0200 Frank fr...@dead-link.org wrote: Hi, can anybody explain to me what exactly happens if I place a package on hold? I have an application which unfortunately requires an older php version. If I now mark the package hold does this mean no major upgrade will be

Re: Security updates for hold package

On Wed, 14 May 2014 11:40:04 +0200 Frank fr...@dead-link.org wrote: On 05/14/2014 11:35 AM, Andrei POPESCU wrote: APT does not differentiate between major or security or whatever upgrade, just about version numbers. However, if you're on stable (or oldstable) there will be no major

Re: Security updates for hold package

On Wed, 14 May 2014 14:16:37 + (UTC) Curt cu...@free.fr wrote: On 2014-05-14, Marko Randjelovic marko...@eunet.rs wrote: Pin php packages to a=oldstable, 500 Pin-Priority 990. But to receive security support for squeeze past this month, you have to include squeeze-lts repo

Re: minimal X.org xserver installation on Debian Wheezy

On Sun, 11 May 2014 13:14:28 +0300 Andrei POPESCU andreimpope...@gmail.com wrote: These two have been replaced by xserver-xorg-input-evdev xserver-xorg-video-radeon xserver-xorg-video-ati I'm fairly sure I installed the Recommends:. You may need to have different video packages.

Re: Default supported service manager in Wheezy

On Fri, 09 May 2014 17:24:13 +1000 Scott Ferguson scott.ferguson.debian.u...@gmail.com wrote: On 09/05/14 16:19, Mihamina Rakotomandimby wrote: Hi all, A long time ago, when I was young ;-), services used to be managed with invoke-rc.d update-rc.d on Debian. Know playing with

Re: OpenVPN client configuration for simultaneous connections to external servers

On Mon, 5 May 2014 14:35:18 -0300 Daniel Bareiro daniel-lis...@gmx.net wrote: On Saturday, 19 April 2014 11:47:37 -0300, Daniel Bareiro wrote: I'm doing tests to simultaneously maintain two VPN links against PureVPN servers. As this is an external provider, I have no way to make changes

Re: debian install wireless fails on laptop with Ralink RT3290 wireless, what to do?

On Sun, 13 Apr 2014 21:26:09 -0700 Britton Kerin britton.ke...@gmail.com wrote: The installer correctly detects a Ralink RT3290 and seems to think its going to be able to work with it, but then it always fails (I think at the DHCP stage) to actually manage to connect to the network. Has

Re: AMD Graphics on Debian 7.4

On Sun, 13 Apr 2014 11:27:31 -0700 (PDT) ray r...@aarden.us wrote: Am I missing something here? Of course you are, in one of previous posts you got a solution but looks like you missed it :) -- http://markorandjelovic.hopto.org -- To UNSUBSCRIBE, email to

Re: Update Squeeze to Wheezy syslog audit entry

On Tue, 18 Mar 2014 13:45:46 +0100 basti black.flederm...@arcor.de wrote: Hello, today I have update squeeze to wheezy and now my syslog is full of messaged like: Mar 18 13:38:39 vsrv65965 kernel: [ 8518.427682] type=1400 audit(1395146319.571:8122): avc: denied { read } for pid=989

Re: Updating not working as expected

Use apt-cache policy to see what are your repositories' priorities, and than adjust them in /etc/apt/preferences. That synaptic option probably changes Default-Release in apt.conf[.d/], but, I don't recommend it because I think it's simpler to specify everyting in /etc/apt/preferences. --

Re: Poll: Which Init-System should Debian use in the future?

On Mon, 27 Jan 2014 12:36:07 + (GMT) Holger Vogt vogt_hol...@yahoo.de wrote: I've found a interesting poll on heise.de (german it news) today. Its a survey which init system Debian Users would prefer for future releases. You can find the Poll here: 

Re: Debian logging - confused

On Wed, 15 Jan 2014 06:14:42 -0500 Tanstaafl tansta...@libertytrek.org wrote: Hi all, I understand and agree with the argument for having separate logs for different services, as it makes troubleshooting individual servcies much easier - in most cases. However, I also would like to

Re: how to upgrade only from stable.

On Fri, 20 Dec 2013 18:06:33 +0500 Muhammad Yousuf Khan sir...@gmail.com wrote: what i want to do is, i want some packages that are available in wheezy , Sid and unstable repositories, however they are very old in squeeze. i also want to keep my system uptodate for any security patchs. with

Re: Problems while using Tor Browser on Debian 7

On Sat, 04 Jan 2014 01:21:03 +0600 Muntasim-Ul-Haque ninet...@iut-dhaka.edu wrote: Hi, I have installed Tor on Debian 7 but couldn't use it. Viladia is showing the following errors: /*[Warning] Could not bind to 127.0.0.1:9050: Cannot assign requested address*//* *//*[Warning]

Re: How do I mount mmc card so that a non-root user has write access?

On Fri, 20 Dec 2013 22:39:32 -0700 Lawrence Galka kala...@gmail.com wrote: I am running debian wheezy with the lxde desktop environment. When I insert a mmc card, it gets detected as /dev/mmcblk0p1 and mounted in /media/blah. Unfortunately, the /media/blah directory is owned by root and

Re: startup console

On Fri, 20 Dec 2013 09:33:01 +0700 Diogene Laerce me_buss...@yahoo.fr wrote: On 12/20/2013 03:44 AM, André Nunes Batista wrote: On Thu, 2013-12-19 at 15:11 +0700, Diogene Laerce wrote: Hi, Does anybody can tell me where I need to go to configure the console I get before X

Re: Init system deba{te|cle}

On Mon, 04 Nov 2013 11:06:25 +0100 berenger.mo...@neutralite.org wrote: Systemd makes system startup more complicated and you need to know not only shell scripts but also systemd syntax. I'm interested. Do you have a document explaining that you need to use shell scripts with systemd?

Re: Init system deba{te|cle}

On Sun, 3 Nov 2013 14:33:27 + Jonathan Dowland j...@debian.org wrote: On Sun, Nov 03, 2013 at 10:23:02AM +0100, Marko Randjelovic wrote: I find shell scripts the most efficient way to automate system adin tasks. It could be because I am a programmer, but at least init scripts

Re: Init system deba{te|cle}

On Mon, 04 Nov 2013 10:44:23 -0600 Conrad Nelson y...@marupa.net wrote: Not everyone is a programmer, but a lot of non-programmers are still admins but are not interested in working with shell scripts if they don't have to. We already have: skeleton, /etc/default. I agree it's poor, but

Re: Init system deba{te|cle}

On Sat, 02 Nov 2013 15:58:45 +0100 berenger.mo...@neutralite.org wrote: _ sysvinit scripts are scripts. Scripts needs programming skills, and the sh language does not have an easy to read syntax. I would in fact call it rather obscure compared to various other languages I used. Systemd

Re: Init system deba{te|cle}

On Tue, 29 Oct 2013 16:55:44 -0400 John johnrchamp...@wowway.com wrote: Could someone who has been following the giant fuss on -devel over init systems explain why there's such a sense of dire urgency? I am sure this is not urgent, Gnome should not be default DE and even they could easily just

Re: Wheezy Installation doesn't work on reboot

Did you change UEFI mode from Secure to Legacy? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20131103104738.7e75b...@eunet.rs

  1   2   3   >