balWeb.net
WebmasterSent: Monday, November 28, 2005 11:16 AMTo:
Declude.JunkMail@declude.comSubject: RE: [Declude.JunkMail] OT:
Erasing Cisco Pix 515 flash RAM
you can also try replacing the NIC card first - we just had
an issue with an older PIX 520 that wouldn;t take an OS upgrade due to an
incom
.
- Original Message -
From: Chris
Fitch
To: Declude.JunkMail@declude.com
Sent: Monday, November 28, 2005 1:45 PM
Subject: RE: [Declude.JunkMail] OT: Erasing Cisco Pix 515 flash
RAM
Not an expert on pix (been years since I worked on one) but
generally there is a way on their routers
Best way to reset a PIX to factory defaults (if you can log in) is
"write erase" then reboot. If you don't have the password, check this
out: "http://www.cisco.com/warp/public/110/34.shtml#pix_without".
Not 100% if you can do it from the monitor, but I've been in a similar
trap in the past
@declude.com
Sent: Monday, November 28, 2005 2:12 PM
Subject: Re: [Declude.JunkMail] OT: Erasing Cisco Pix 515 flash
RAM
Best way to reset a PIX to factory defaults (if you can log in)
is "write erase" then reboot. If you don't have the password, check this
out: "http://www.cisco.com/war
the flash image... I'm guessing it hangs in the process
of loading the startup-config.
Darin.
-
Original Message -
From:
S.J.Stanaitis
To: Declude.JunkMail@declude.com
Sent: Monday, November 28, 2005 2:12 PM
Subject: Re: [Declude.JunkMail] OT: Erasing Cisco Pix 515
flash
Subject: Re: [Declude.JunkMail] OT:
Erasing Cisco Pix 515 flash RAM
Sucks dude. Any chance it's part of a load balanced
config and it's looking for the other PIX? Have you just let it sit to
see if it times out?Darin Cox wrote:
Unfortunately, wr erase only works from enable
: [Declude.JunkMail] OT: Erasing Cisco Pix 515 flash
RAM
Best way to reset a PIX to factory defaults (if you can log in)
is "write erase" then reboot. If you don't have the password, check this
out: "http://www.cisco.com/warp/public/110/34.shtml#pix_without".Not
100% i
Sent: Monday, November 28, 2005 3:31 PM
Subject: Re: [Declude.JunkMail] OT: Erasing Cisco Pix 515 flash
RAM
Only thing I can think of is from monitor mode...copy over the
flash with tftp.
Otherwise you have to call cisco support and get an erase
utility.
- Original Message -
From
Only thing I can think of is from monitor mode...copy over the flash
with tftp.
A few different PIX OS images were tried, including the eraser
image, but none of them overwrote the corrupt area.
Darin gave me the full rundown off-line and, sadly, there was nothing
he could do (supported
Yep. Thanks again for the assist, Sandy. If only
Darin.
- Original Message -
From: Sanford Whiteman [EMAIL PROTECTED]
To: Doug Anderson Declude.JunkMail@declude.com
Sent: Monday, November 28, 2005 4:23 PM
Subject: Re[2]: [Declude.JunkMail] OT: Erasing Cisco Pix 515 flash RAM
28, 2005 1:35 PM
To: Declude.JunkMail@declude.com
Subject: Re: Re[2]: [Declude.JunkMail] OT: Erasing Cisco Pix 515 flash
RAM
Yep. Thanks again for the assist, Sandy. If only
Darin.
- Original Message -
From: Sanford Whiteman [EMAIL PROTECTED]
To: Doug Anderson
]
To: Declude.JunkMail@declude.com
Sent: Monday, November 28, 2005 5:32 PM
Subject: RE: Re[2]: [Declude.JunkMail] OT: Erasing Cisco Pix 515 flash RAM
Is it possible you have a bad memory module in the box?
Remove one of the memory modules and load a 6.x release. If that does not
work try th other
This is way off topic, but I'm desperate so I'm
appealing to the list...
We just purchased a used Cisco pix 515 running
7.0(4) that won't boot due to what we believe is a corrupted
startup-config. Does anyone out there know how to clear NVRAM on a pix
from monitor mode? We can't get to
We've tried everything we can think of, even a special flash erase image from
Cisco, but it needs the Pix to be running 6.2(2) to work, and we don't have
that image.
I have 6.2(2). Send me an off-list message if you want it.
--Sandy
--
Sanford Whiteman,
14 matches
Mail list logo