--- In digitalradio@yahoogroups.com, Rick W mrf...@... wrote:
Hi Scott,
Clover 2000 (circa 1995) is a wide bandwidth version of Clover II (circa
1992) and is may be used by a few agencies. It uses proprietary
hardware/firmware similar to Pactor 2 and 3 with 8 tones at a baud rate
of
No one I know uses the HAL product, but it appears from their web
information that they have several software packages that can provide
peer to peer mail, chat, and gateway to the internet. Since the cost is
prohibitive for casual amateur use, it is unlikely that you will find
others to
Has anyone had issues using Paclink with a KPC3+?
All seemed fine for about 3 connects, but now Paclink can't talk to the TNC. I
can talk to the TNC just fine with Hyper Terminal and Winlink and all are set
to 9600 baud. Will do a re-istall to see how that goes, but curious if anyone
else
We experienced the same thing this weekend at our EOC center, we are also going
to do a fresh install and setup.
Fred
VE3FAL
VE3ONN Ontario North ARES E.O.C
On Mon, 30 Mar 2009 14:21:04 -
dougjustham dougjust...@yahoo.com wrote:
Has anyone had issues using Paclink with a KPC3+?
All
I have had issues with other programs and the KPC3+.
In fact to the point that I gave it away and replaced it
with a PK232.
John, W0JAB
At 09:21 AM 3/30/2009, you wrote:
Has anyone had issues using Paclink with a KPC3+?
We'er going out in the RV for about two weeks, and would like to check my mail
on yahoo.com: Question is there nay mail servers on the HF that I can check
into and get my mail, and what program would I need for this to happen, any
help ?
Russell
Yesterday is HISTORY. Tomorrow is a MYSTERY.
hi to all in the group .. can any one tell me wer the white wire , or lead from
the usb on the main softrock v.9 .board can any one please tell me wer i
solder it to , as wen i was fitting it in a new box . it
came of aand i dont no wer to or wat pin to solder it back on thanks
please can somebody tell me wer i can find hb9tlk loop dll file please , as i
have benn looking all afternoon for it . to no avail . it is supposed to be
in the files on the softrock group but i cant find it ,,, durrr and can you
please tell me wer to put it , or open it to ... thanks
Hi Russel,
The only solution I know that is capable of doing that is pskmail. You need to
enable pop at yahoo but thats it.
There is more info available here: http://pskmail.wikispaces.com/
73 de Per, sm0rwo
From: Russell Blair russell_blai...@yahoo.com
Francis, have you tried posting this same question in the
http://groups.yahoo.com/group/softrock40/ group? They specialize in this device
and even have instruction files on all the softrock boards in the files section.
John - KE5HAM
--- In digitalradio@yahoogroups.com, francisho...@...
Russell,
MultiPSK is able to send and received email via Winlink 2000 using its
141A (ALE) mode and one of the HFN pilot stations (see
http://hflink.com) which are generally accessible on most HF bands
throughout North America. MultiPSK will also allow you to export all the
received mail into
Hello
hb9tlk loop.dll is available there:
http://f6cte.free.fr/loop.dll
73
Patrick
- Original Message -
From: francisho...@btinternet.com
To: digitalradio@yahoogroups.com
Sent: Monday, March 30, 2009 8:21 PM
Subject: [digitalradio] dll file
please can somebody tell me wer i can find
thanks patric . all i have to do now is find out wer tout the dll file in my
multipsk .. thanks
From: Patrick Lindecker f6...@free.fr
To: digitalradio@yahoogroups.com
Sent: Monday, 30 March, 2009 9:22:14 PM
Subject: Re: [digitalradio] dll file
Hello
hb9tlk
Hello Francis,
This dll is to be used with the SdR program (the decoding program will be
connected to the SdR program through the dll).
Now, if the goal is to use Multipsk, the best is to take profit of the direct
RX/TX SdR interface available in the 4.13 version:
I/Q direct interface via the
Did fresh reinstall and still had issues. Accidentally had KPC#+ off when
starting the connect process and turned it on after the Paclink displayed Comm
Port Open and it set up fine. I tried over and over again and it seems to
work fine if I wait to power the TNC on after the comm port is
anyone know a way to get paclink to connect to a Node 3 hops out? I am trying
to connect to KC2LAS-10, bu it is 3 hops from me.
16 matches
Mail list logo
