Does anybody else have the problem that clicking the printer button on the
print preview screen does not actually cause anything to happen?
73,
Rick
W2RDS
Sorry if this is a bit off topic.
I have been trying to get my radio (TS-950SD) setup to use RTTY/PSK31 and I
have made the cable to go from the connector on the back of the radio to
the soundcard. I plugged the cable into the line in jack on the sound card
and could not get anything to work.
Testing
All,
I have noticed that since I upgraded to V6.02 that there is an annoying
behavior that did not happen in the 5.x versions. The problem is that when
I have DX4WIN open and I then open/switch to another window (web browser
for example) when I click the DX4WIN button on the start/programs
Stoneking; dx4win@mailman.qth.net
Subject: Re: [Dx4win] V6.02 question
Rick,
I cannot reproduce this behavior under Win98 or under WinXP.
Paul
At 09:58 AM 7/9/03 -0400, Rick Stoneking wrote:
All,
I have noticed that since I upgraded to V6.02 that there is an annoying
behavior that did
All,
I have a strange problem with V6.02 on my work computer which is running
Windows NT. A little background: I use the installation on my work
computer so that I can run various reports and print them on the nice
laserjet printer here. I have been a DX4WIN user since very early 2000 and
Fred,
I recenctly when through this exact same exercise. I had to make a couple
of chagnes to the DX4WIN rig file for the pro III.Find the [RF-Current
VFO] entry and edit it as follows:
[RF-Current VFO]
CMD=Read VFO A
FMT=BCD-R
POS=7
LM=4
After making these changes my ProIII works
PROTECTED] Tue Oct 31 00:06:08 2006
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Tue Oct 31 00:13:14 2006
Subject: [Dx4win] 756 ProIII and RigTalk USB interface
In-Reply-To: [EMAIL PROTECTED]
References: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
At 10:52 PM 10/30/2006, Rick Stoneking
VFO; L=VFO AB D=N
Cmd: Read VFO A
Send:
FE FE 00 E0 03 FD
Echo:
FD FE FE 00 E0 03
Received:
FD FE FE E0 6E 03 80 96
94 42 00
Integer Read: Current VFO; V=7
Last error = 0
- Original Message -
From: Rick Stoneking [EMAIL PROTECTED]
To: W2RDS Rick [EMAIL PROTECTED]; DX4win Reflector
Correction
In the Password box in DX4WIN I entered may password (not my callsign).
Doh! Sorry about the error.
Rick
-Original Message-
From: Rick Stoneking
Sent: Monday, July 3, 2023 08:31
To: Tim moore ; Florian w
Cc: DX4WIN Reflector
Subject: RE: [Dx4win] DX4WIN and QRZ.com
Tim/All,
I have subscribed to QRZ.com XML service and verified it is working using
the QRZ XML Test page.
I have put the following in the Ext Data config of DX4WIN - this is a
copy/paste from the fields in DX4WIN:
Initial Callsign Lookup Address:
was None
it would not have worked for the Web lookup either... Wrong! I tested this
and with Data Source set to None the Web lookup still works fine, so it was
all cockpit error.
My apologies,
Rick
W2RDS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Rick Stoneking
Sent
All,
I have DX4WIN 9.0.9 running on a Windows 10 PC which has one build in
hardware serial port which is connected to my Kenwood TS-950SD via the
Kenwood IF-232. I then have a USB 2.0 to Serial (FTDI chipset) adapter
plugged in to a USB 2.0 port (COM9) and configured DX4WIN to use COM9 for CW
13 matches
Mail list logo
