The other way is to hit F8, Enter key and then F9.
Dave, N4QS
Sent via BlackBerry by ATT
-Original Message-
From: John, K9EL k...@comcast.net
Sender: dx4win-boun...@mailman.qth.net
Date: Fri, 27 Jan 2012 15:50:24
To: 'Jim Reisert AD1C'jjreis...@alum.mit.edu; 'John
Sullivan'jsull
and requires some advanced knowledge of
DX4WIN. Paul could make this whole process a snap by allowing users to
create an ADIF file directly from the Submission report once it is
generated.
I hope this helps. Good luck.
Dave, N4QS
- Original Message -
From: Pete Smith N4ZR n
. It would sure be
a great enhancement to roll out at Dayton!
Dave, N4QS
- Original Message -
From: B. Nowak n8...@comcast.net
To: dx4win@mailman.qth.net
Sent: Monday, May 07, 2012 8:09 PM
Subject: Re: [Dx4win] export a submission to ADIF?
Dave/Jim List
Thanks for the help on the ADIF
think you have to exit out of MMTTY in DX4WIN and open the full version of
MMTTY to get to this setting.
Dave, N4QS
- Original Message -
From: PY2YP py...@py2yp.com
To: Dx4win@mailman.qth.net
Sent: Sunday, June 24, 2012 6:40 AM
Subject: [Dx4win] MMTTY
Is there any set to have MMTTY
My mistake. I meant the MMTTY help file. Dave
- Original Message -
From: N4QS n...@comcast.net
To: PY2YP py...@py2yp.com; Dx4win@mailman.qth.net
Sent: Sunday, June 24, 2012 1:41 PM
Subject: Re: [Dx4win] MMTTY
This if from the N1MM Help file:
Stay on Top
You can make MMTTY stay
Have you tried Reports and then Awards?
Dave, N4QS
- Original Message -
From: George goofy...@rochester.rr.com
To: dx4win@mailman.qth.net
Sent: Monday, July 16, 2012 7:49 PM
Subject: [Dx4win] interesting, no 6M DX4WIN
I've clicked on everything 6 meters in preferences and cannot get
into
DX4WIN without the Options for duplicate QSOs window popping up. Doing it
this way imports the confirmations directly.
Dave, N4QS
- Original Message -
From: Fred - NA2U cw...@juno.com
To: dx4win@mailman.qth.net
Sent: Saturday, July 21, 2012 3:54 PM
Subject: [Dx4win] Importing LOTW
I use an RCS-1 rotor control box by MDS which drives the Yaesu rotator.. The
MDS box is connected to my pc via a serial cable. I also use pstRotator
software and/or DX4WIN to automatically turn the beam by pressing F11. Works
great!
Dave, N4QS
Sent via BlackBerry by ATT
-Original
automatically turns on
the default filter selection? I have lots of filters setup based on groups
and dates, but 99.99% of the time, I want the log to open to my main N4QS
group filter. I always have to click on Filter and Selection to select my
default filter whenever I open the log. I don't want
directly from the Submission report once it is
generated.
I hope this helps. Good luck.
Dave, N4QS
- Original Message -
From: andyphewitt andyphew...@btopenworld.com
To: dx4win@mailman.qth.net
Sent: Wednesday, August 29, 2012 12:30 PM
Subject: [Dx4win] ON - LINE DXCC APPLICATION
I am
--
but it provides an automated way to clean up over 60,000 Qs!
Good luck.
Dave, N4QS
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Dave Earnest k...@arrl.net
Cc: DX4WIN dx4win@mailman.qth.net
Sent: Tuesday, September 04, 2012 6:39 PM
Subject: Re: [Dx4win] Duplicates
,
Dave, N4QS
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Peter Solly peterso...@bell.net
Cc: DX4WIN@mailman.qth.net
Sent: Tuesday, September 18, 2012 3:23 PM
Subject: Re: [Dx4win] no psk31
On Tue, Sep 18, 2012 at 12:42 PM, Peter Solly peterso...@bell.net wrote
Yes, dual monitors work great! DX4WIN saves all of the windows across both
screens.
Dave, N4QS
--Original Message--
From: Mike Baker
Sender: dx4win-boun...@mailman.qth.net
To: Dx4win@Mailman. Qth. Net
Subject: [Dx4win] Dual monitors
Sent: Nov 29, 2012 4:01 PM
Hey guys
are not all bad! But yes, I would like to see Paul work on
some enhancements and take more input and feedback from his users.
By the way, I recently tried to uninstall DxLab after testing it for a few
days, and it would not uninstall properly! So I guess you get what you pay for!
Dave, N4QS
I have the same problem when I use an external monitor and then switch back to
the built in screen on the laptop. The two have different aspect ratios which
causes the windows to resize.
Dave, N4QS
Sent via BlackBerry by ATT
-Original Message-
From: Ricardo Navarrete ricardoea
I assume that Jim's upgrade notes will apply:
http://dx4win.ad1c.us/appnotes/upgrade.html
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of n...@vci.net
Sent: Thursday, October 19, 2017 2:47 PM
To: 'Ricardo
This is good news!
I placed my order and downloaded version 9.0. How do I upgrade from version
8.05 to 9.0? It has been so long, I can't remember.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of Ricardo
Hi Mike. The latest version. 9.0.3
Dave, N4QS
-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com]
Sent: Tuesday, December 19, 2017 2:22 PM
To: n...@vci.net; 'Wes Printz W3SE / ZL3TE' <zl...@xtra.co.nz>;
dx4win@mailman.qth.net
Subject: RE: [Dx4win] How to
.
Dave, N4QS
-Original Message-
From: Wes Printz W3SE / ZL3TE [mailto:zl...@xtra.co.nz]
Sent: Tuesday, December 19, 2017 12:44 PM
To: dx4win@mailman.qth.net; n...@vci.net
Subject: Re: [Dx4win] How to change mapping for FT8
Hi Dave,
You will need to edit the ADIF File.
Use Search
for
this QSO field?
Thanks in advance.
73,
Dave, N4QS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered
the Notes for this Call field in DX4WIN.
Simple workaround. Sorry for the wasted bandwidth. Hi, hi
Now back to working DX...
Dave, N4QS
-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com]
Sent: Tuesday, December 19, 2017 2:35 PM
To: n...@vci.net; 'Wes Printz W3SE /
of PstRotator and also select DX4WIN under Tracker.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Steve Lund
Sent: Friday, November 10, 2017 3:55 PM
To: DX4WIN <DX4WIN@mailman.qth.net>
Subject: [Dx4win] PzRot
hit F11 to turn
the rotator from within DX4WIN. Works great.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of Steve Lund
Sent: Friday, November 10, 2017 4:08 PM
To: Mike Cizek W0VTT <mgci...@gmail.com&
QSOs made with J5 on 15M.
So something is wrong with the mode filter in the country window. This just
started with 9.01 or 9.02. It used to work just fine.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf
How do you set up xml data lookups from qrz.com? I don't see it in the
documentation. I have a subscription.
Thank you.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of kostas sv1dpi
Sent: Friday, October 20, 2017
Click on Order and then Secure Order Form at the top. You may have to
refresh the form, but it should show Version 9.01 in the order box.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mike Greenway
Sent: Friday
you Paul!
73,
Dave, N4QS
-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com]
Sent: Friday, October 20, 2017 3:30 PM
To: n...@vci.net; 'kostas sv1dpi' <sv1...@otenet.gr>; dx4win@mailman.qth.net
Subject: RE: [Dx4win] new features in 901
Hello Dave,
File > Pr
You don't need to open the license file. Just copy it into the new
directory for ver 9.0 See Jim's upgrade tips below:
Dave, N4QS
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Thursday, October 19, 2017 7:08 PM
To: DX4WIN
Is there a long queue for license keys?
Dave, N4QS
-Original Message-
From: sa...@dx4win.com [mailto:sa...@dx4win.com]
Sent: Thursday, October 19, 2017 2:42 PM
To: David R. Perry <n...@vci.net>
Subject: DX4WIN Secure Order
Thank you for your recent order via the DX4WIN we
Ernie,
This may or not respond to your question. I save my log to OneDrive in the
cloud, which allows my four separate computers at three different locations
to access and sync to the same master logfile. Works great in Version 8.05
and in the new Version 9.01.
73,
Dave, N4QS
-Original
Mike,
Have you tried Alt P?
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mike Greenway
Sent: Monday, October 23, 2017 10:55 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] V9 Packet window
OK I give up.. After 2
I updated to 9.04 this morning, but I do not see a revision history. I
wonder what's new! Interface to WSJT-X?!!
73,
Dave, N4QS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http
Add the call sign, change country to Bouvet and save the QSO. Then reselect
the QSO and delete it. 3Y0Z will now come up as Bouvet.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Tom Hammond
Sent: Wednesday
Is there any way to create a custom award in DX4WIN ver 9.04 to support the
International Grid Chase?
73,
Dave, N4QS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net
contacts from
WSJT-X. I wish DX4WIN would do that.
5. Not sure about Jim's script and XP. You will have to ask him.
I hope this helps.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ed Stratton
Sent
data. You have to click in that field to get it to delete
the -- and then it appears that the new data will fill and then be saved.
Not exactly sure about this behavior, but it appears to be consistent with
how the other fields get updated.
73,
Dave, N4QS
-Original Message-
From: dx4win
Jim,
I think he is talking about your email from a couple of weeks ago. The one
in which you talked about a way to map windows to the wsjt-x file that is
hidden in Users/AppDate/ etc.
I have the email saved somewhere.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun
Try Alt-F3.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of K. Scott Wood
Sent: Tuesday, January 02, 2018 2:03 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem Accessing QRZ.COM
Gentlemen,
I recently
Randy,
Mine remembers the last logbook report format and the column widths. Not
sure how.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Randy Farmer
Sent: Friday, August 17, 2018 11:27 AM
To: DX4WIN Reflector
Subject: [Dx4win] "Sticky&quo
the WAS list so that the bogus row at the bottom
goes away.
Thanks to all who responded.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net <dx4win-boun...@mailman.qth.net> On Behalf
Of kostas sv1dpi
Sent: Wednesday, March 28, 2018 12:09 PM
To: dx4win@mailman.q
e S is red and
the L is black. If I try to hit F2 and do a search for SL in the State
field, I get nothing.
It is apparent that there is a corrupted QSO in the database, but the
question is how do I find it and delete it? Any ideas would be appreciated.
73,
back to 50 states.
I hope that helps.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of Leonard Kay
Sent: Friday, June 22, 2018 8:37 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Corrupt state file?
Hi all,
After I downloaded the most recent update
Rory,
What contesting software did you use to create the WWDX log file?
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Rory Bowers
Sent: Monday, October 29, 2018 12:03 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4Win Import Help
I worked the WWDX
work with only one computer. Just map a drive to the file location that Jim
described below. Importing from WSJT-X becomes a snap!
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Jim Reisert AD1C
Sent: Thursday, November 8, 2018 1:50 PM
To: g
recall, you used to have to go into the Personal tab to turn on expert mode
to change this, but that is no longer available. Is Top Ten Devices using a
LPT port still supported in Version 9? And can anyone tell me what happened
to Expert Mode? Thanks, Dave, N4QS
John,
This has happened to me before. As I recall, you should try doing a search
of your log for "DC" in the state field. In some contests, those living in
DC can send that as their exchange, and that gets imported into the state
field incorrectly. 73, Dave, N4QS
-Origin
and it automatically updates with new spot
info when your radio changes to a different band.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of Dick Grolleman
Sent: Monday, June 17, 2019 12:13 PM
To: Paul van der Eijk
Cc: DX4WIN Reflector
Subject: Re: [Dx4win
Just open your existing copy of DX4WIN (assuming you have Version 9
installed.) Then click on Help and Check for Updates. The new DX4WIN
executable file will be in the list of files to download. Then click on OK.
It's that simple.
Dave, N4QS
-Original Message-
From: dx4win-boun
arrow again. But if you tune
the radio off the top or bottom of the scale, my version will automatically
move the scale up or down to follow the red arrow.
Dave, N4QS
From: Tom Doligalski
Sent: Monday, June 17, 2019 3:34 PM
To: Dick Grolleman ; n...@vci.net
Cc: DX4WIN Reflector
Subject
Rick,
My F8 search is working fine in 9.05. My log has over 150,000 Qs. Are you
sure you opened your old log? Try going to file, open and selecting your
log from the Save folder within the DX4WIN directory for Version 9.
Dave, N4QS
-Original Message-
From: dx4win-boun
Rick,
Sorry, that is beyond my pay grade! You might email Paul directly and ask
for his help.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Rick
Sent: Monday, June 17, 2019 3:48 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Version 9.05
,
Dave, N4QS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list
in
yellow on the map. You may need to zoom in to see it.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of radiode...@gmail.com
Sent: Wednesday, September 11, 2019 10:10 AM
To: 'vk3io' ; DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN World Map
@Ron
I just sent out five or six SWL cards using DX4WIN. Maybe you have to enter
the station call sign and bring it up in the QSO window before Control+F2 will
work. Did you do that? I am just guessing. I can't remember for sure.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun
Yes, I would also like the option to turn off IOTA as the default when
spotting.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Jeffrey Maass
Sent: Sunday, November 3, 2019 9:40 AM
To: DX4Win Mailing List
Subject: [Dx4win] 'Announce DX' &
I am on the same version and it works normally for me. I import the wsjt-x
log from two different stations many times every day. I wish that we could
get UDP Broadcast working so that QSOs made in WSJT-X would automatically
import into DX4WIN.
Dave, N4QS
-Original Message-
From: dx4win
Another one is com0com.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Mike Cizek W0VTT
Sent: Saturday, December 14, 2019 1:29 PM
To: 'William Osborne' ; dx4win@mailman.qth.net
Subject: Re: [Dx4win] HamLib
A port sharing program like LP Bridge works
Hi Irwin,
I have also used JTAlert, and you have the same problem. As long as DX4WIN
cannot receive UDP broadcasts of QSO information, no program would be able to
automatically upload QSOs to it. It is a limitation of DX4WIN, not the other
logging apps.
73,
Dave, N4QS
From
support to make that happen.
73,
Dave, N4QS
From: ShelbyK4WW
Sent: Tuesday, October 15, 2019 4:31 PM
To: N4QS
Subject: Re: [Dx4win] Fwd: WSJT to DX4WIN
"So now all you can do is manually import the logfile from WSJT-X into DX4WIN.
This is not as easy as it sounds be
an be a real problem when you are in the middle of a big
opening on 6 meters into EU. DX4WIN is an excellent logging problem except for
this one glaring weakness.
Now all you can do is manually import the WSJT-X logfile over and over and
over...
I hope this helps.
73,
Dave, N4QS
-
the
state field since DC is not a state. Hit enter to save the change. That
should get you back to 50 states. This normally happens when importing a
contest file into DX4WIN.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Kirk-N0KK
Sent: Saturday
, it is difficult to track them down on my
own. You idea is a good one.
I also like suggestions #2 and #3. Great ideas that would be used extensively
by me if available.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of Paul GRANGER
Sent
I like all three of your suggestions. I know that I would use them frequently.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of Paul GRANGER
Sent: Wednesday, November 27, 2019 10:49 AM
To: REFLECTOR dx4win
Subject: Re: [Dx4win] Ideas
all sorts of ways to get duplicates into the log and you
have no way to identify them. I was just trying to agree with Paul that it
would be a nice feature to have a function or utility within DX4WIN that would
help us identify potential dupes.
73,
Dave, N4QS
-Original Message-
From: d
Paul, I agree that we need direct logging via UDP broadcast with
WSJT-X/JTDX. Especially before the 6 meter E season this summer.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Paul GRANGER
Sent: Thursday, January 9, 2020 5:20 AM
To: REFLECTOR
was right
there in the middle and I could move it to where I wanted.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Tim moore
Sent: Monday, December 23, 2019 3:02 PM
To: John K9EL
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] lost packet window
new
enhancements as our fascinating hobby continues to evolve.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of WA7AA
Sent: Thursday, April 16, 2020 11:25 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Very Satisfied with DX4WIN
On 16-Apr-20 08
Sure, I would be willing to pay for it. Can Paul give me a quote?
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of Jerry N9AW
Sent: Thursday, April 16, 2020 3:53 PM
To: Paul F6EXV
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Fw: Re: Very Satisfied
. It
will automatically upload QSOs to Clublog, QRZ.COM and other websites.
These are all features that I need to have especially as I get ready for the
summer Es season on 6 meters.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Paul F6EXV
Sent: Saturday
TM6M just confirmed about 50 QSOs in my log via LoTW. That had to be a big
log. Maybe that was the hold up.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of Paul F6EXV
Sent: Sunday, April 26, 2020 10:22 AM
To: dx4win@mailman.qth.net
Subject: Re
It's been four days and I still see no country updates from the Help menu in
DX4WIN. Jim, can Ver 9 users still use the updater? I might want to go
back to that if possible.
Thank you.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Jim Reisert AD1C
,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of William Osborne
Sent: Thursday, May 7, 2020 12:08 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Digest, Vol 193, Issue 1
Hi Folks,
I wonder if the lotwreport.notfound works. Due to potential sync
Arne,
If you have already created the Group, you just need to go to Filter,
Selection and click on the arrow in the upper right (next to All QSOs).
This is display the list of all groups that you have created. Select the
one you want and click OK.
73,
Dave, N4QS
-Original Message
Should read:
"This will display...
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of n...@vci.net
Sent: Tuesday, June 30, 2020 9:38 AM
To: 'ARNE GJERNING'
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Log File
Arne,
If you have already cr
Rick,
My comments were not directed toward LOTW. That’s not the issue. Thank you
for all your efforts in working to improve LOTW.
73,
Dave, N4QS
From: Rick Murphy
Sent: Monday, June 15, 2020 1:49 PM
To: n...@vci.net
Cc: DX4WIN
Subject: Re: [Dx4win] QSO time issues when
to spend this afternoon finding all the dupes that
were created this morning!
Thank you.
73,
Dave, N4QS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net
Hi Mike,
Yes, I used this same tutorial. WSJT-X and N1MM worked great together.
There was a lot of activity on 6M FT4 towards the end of the contest.
73,
Dave, N4QS
-Original Message-
From: Mike Cizek W0VTT
Sent: Monday, June 15, 2020 1:45 PM
To: n...@vci.net; dx4win
Bob,
Assuming you are using Version 9 of DX4WIN, the digital modes will be
imported correctly. FT4 QSOs show up as MFSK for the mode and FT4 as the
submode. FT8 QSOs show up as FT8 for the mode and no submode.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net
It is also fixed in version 2.2.2
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Jim Reisert AD1C
Sent: Saturday, March 13, 2021 10:16 AM
To: Pat Pat
Cc: DX4WIN Reflector ; DaveK
Subject: Re: [Dx4win] RE : Import FT8 LOG FILE INTO DX4WIN
Tim,
I believe PstRotator will do what you need. It will interface with DX4WIN
and it also has a feature that allows on rotator controller to be the slave
of another controller. It's a great little app.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net
. But merely setting the default to off would be the simplest
approach.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Alan Zack
Sent: Tuesday, January 25, 2022 10:27 PM
To: 'David Raymond'
Cc: DX4WIN Group
Subject: Re: [Dx4win] Omitting IOTA info
This is a test.
Dave Perry, N4QS
3600 Savoy Circle
Paducah, KY 42001
USA
From [EMAIL PROTECTED] Wed May 16 00:44:33 2007
From: [EMAIL PROTECTED] (Jeff Steinkamp)
Date: Wed May 16 00:54:22 2007
Subject: [Dx4win] Date Formats
Message-ID: [EMAIL PROTECTED]
I have the date format in the setup
: 299 matches
RTTY: 66 matches
80M: 132 matches
40M: 228 matches
30M: 119 matches
20M: 282 matches
17M: 146 matches
15M: 209 matches
12M: 37 matches
10M: 157 matches
Thanks for implementing FJ.
Dave, N4QS
- Original Message -
From: Jim Reisert AD1C [EMAIL
dropped
a QSO with a bug they were having. I had over 25,000 Q's to compare, but
found the missing one in just a few minutes. But a file comparison utility
would work fine too.
Dave, N4QS
- Original Message -
From: AC0W [EMAIL PROTECTED]
To: DX4WIN dx4win@mailman.qth.net
Sent
I have a new K3 and it works perfectly with DX4WIN. I have baud rate set at
4800 and poll rate at 1000 ms. I have Elecraft K3 X4 selected as radio
type.
Dave, N4QS
- Original Message -
From: Howard K2HK k...@arrl.net
To: n...@n3me.net; dx4win@mailman.qth.net
Sent: Sunday, June 28
confirmed -- e.g. Lotw, Card, etc. That
way I could more easily separate out Lotw submissions from Card submissions
when making an online submission of both types via the Lotw website.
But I am placing my order for 8.0 tonight!
Dave, N4QS
- Original Message -
From: Randy Farmer w
to 0 for worked cutoff, I get the same number of Total
Worked as in ver 8.0 with the value set to 3650.
I may have to revert back to 7.07 for a while and let the dust settle.
Dave, N4QS
- Original Message -
From: DAVID DERAIN k8...@sbcglobal.net
To: dx4win@mailman.qth.net
Sent
Has this issue been fixed by Paul? Lotw uploaded QSOs should not be showing
as mailed (M) in the DXCC Listing.
Dave, N4QS
- Original Message -
From: DAVID DERAIN k8...@sbcglobal.net
To: dx4win@mailman.qth.net
Sent: Thursday, August 06, 2009 10:30 AM
Subject: [Dx4win] 8.01 REPORT
Jim,
I tested sending CW from the keyboard with no problem. I simply use DX4WIN
as the device type and LPT1 as the port. Works great in both versions 7.07
and 8.01. The first two letters are not being joined. Using Windows XP.
Dave, N4QS
- Original Message -
From: Jim Reisert
Thor,
Mine works okay in version 8.02. I just imported my SAC log into DX4WIN
with no problem. You must have a corrupted file of some sort.
Dave, N4QS
- Original Message -
From: Thorvaldur Stefansson otrada...@gmail.com
To: dx4win@mailman.qth.net
Sent: Sunday, September 20, 2009 8
works better
than the Elecraft K3 radio file.
Dave, N4QS
- Original Message -
From: Tony McClenny n...@n3me.net
To: Dx4win@mailman.qth.net
Sent: Saturday, October 31, 2009 6:13 AM
Subject: [Dx4win] 30 Meter (USB) Error
My Elecraft K3 radio always opens in USB mode and I have tried
. The RX and TX
frequencies are being set properly by DX4WIN -- it is just that the filter
bandwidths are being reversed. I am using the Elecraft K3 X4 radio file.
Any help would be appreciate. Thanks.
Dave Perry, N4QS
__
Dx4win
.
By the way, nice working you yesterday on 12M CW! You were loud into KY!
73's,
Dave, N4QS
- Original Message -
From: John Shaw jns...@internet.co.nz
To: dx4win@mailman.qth.net
Sent: Monday, November 16, 2009 5:28 PM
Subject: Re: [Dx4win] ADIF export to Club Log
One question, one reply, how
command SWH58 as he
suggested. Works fine now. Some people may want to norm their filters when
they go into split. Not me. I like keeping my filter settings for both RXs
the same.
Dave, N4QS
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Dave Perry N4QS n
Garry,
Click on Reports, Awards, WAZ tab and then uncheck the Lotw box in upper
left corner, then click OK.
Dave, N4QS
- Original Message -
From: Garry Shapiro ga...@ni6t.com
To: dx4win@mailman.qth.net
Sent: Wednesday, April 21, 2010 7:29 PM
Subject: Re: [Dx4win] WPX, WAZ, County
version 8.02.
Thanks,
Dave Perry, N4QS
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
in a new directory
and selected the main dx4w804 directory under Program Files. Works fine.
Your emails about deleting older versions prompted me to do just that
yesterday. I also upgraded to 8.04 without a hitch.
BTW, nice working you in the NAQP yesterday.
Dave, N4QS
- Original Message
?
Is this approach better than using a Y cable and having the SDA controller
listen
for any frequency exchanges between the pc and the K3?
I am also wondering whether or not N1MM can support Steppir in the same
way. Thanks in advance for the assistance.
Dave, N4QS
by selecting its
group number by going to File, Preference and QSO. See group in upper
right
corner.
You will find that the group functions within DX4WIN are very powerful and
easy to use. Others may know of other ways to use and refer to groups.
Dave, N4QS
- Original Message -
From: cw
I followed the link and the download shows a zip file called tqsl-113.zip.
Look's like the new one to me. I did not try to unzip the file yet.
Dave, N4QS
- Original Message -
From: ON4AOI on4...@skynet.be
To: 'Jim Reisert AD1C' jjreis...@alum.mit.edu
Cc: dx4win@mailman.qth.net
Sent
1 - 100 of 183 matches
Mail list logo