correction options are all 0 in my
case.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/K3-Firmware-2.10%2C1.81-problems-tp18152247p18153361.html
Sent from the Elecraft
to
send @ as a prosign instead of using it as an abort character.)
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/K3-PSK-D-tp18153773p18154526.html
Sent from the Elecraft mailing
features such as prevention
of compression and other data special settings.
Julian (G4ILO) thanks for your interest. All my CAT corrections are zero
in MixW also. Interesting that you say there
was some change in the last release - K3 was erroneously reporting the
data modes as reversed
that rather than redefine the mode values so that they are
the opposite of the K2, MixW needs to be updated. I expect that Simon has
already updated HRD to take account of the change, as he was told about it a
couple of weeks ago.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack
with my calculations.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/-k3--Wattmeter-calibration-tp18155295p18155740.html
Sent from the [K3] mailing list archive at Nabble.com
of always switching to
TEST whenever I turn on the radio. Except when I forget to, of course.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/K3-Key-down-on-power-up
my KK7UQ IMD meter tells me that my IMD is 2dB better using the internally
generated modulation than it is using the soundcard.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com
it is (almost) impossible for a program to tell which of these data
mode options have been selected on the radio.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/K3-Firmware
Shane White wrote:
G4ILO wrote:
I didn't get the option of using the postal service here to the UK
because the maximum insurance was not enough to cover the value of the
shipment. I assume that you just looked at the website, which doesn't
understand this, rather than contacting
the maximum insurance was not enough to cover the value of the shipment. I
assume that you just looked at the website, which doesn't understand this,
rather than contacting Elecraft Sales direct.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com
have
the DSP providing most of the selectivity, so it probably depends more on
how fussy you are and how willing to spend the extra bucks.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http
with firmware. Considering
the functionality such a device would provide, I can't see much reason for
not choosing the already available alternative.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context
risk of harming the K3 and without requiring any
special equipment. I have had enough feedback to suggest that my idea should
work (though still suggesting that I should try it first on something
disposable.)
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3
in
there. But if that does ever happen, it probably isn't going to happen for a
very long time, and I can't see what it would offer that an Asus Eee PC (or
similar) couldn't do a lot better with a similar footprint and cost.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3
to be removed. The idea is that the solder will be melted on both sides
of the SMD part simultaneously and the part can immediately be moved. If
necessary, the solder wick can then be used to clean up the area.
Does anyone think this would work?
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's
on a tool to do
a one-off modification just isn't an option.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/K3---SMT-mods-tp18052931p18058004.html
Sent from the Elecraft mailing
didn't spot there were two
different settings: PA NOR and PAIO NOR. So I had one of those heart sinking
oh dear, it doesn't work moments. Possibly something that could be spelt
out a bit more clearly in the otherwise admirably thorough installation
instructions?
-
Julian, G4ILO K3 s/n: 222 K2
by
side, without the aid of a lab full of test equipment. These test results
just encourage people to obsess over differences in performance that
probably can not be discerned in actual on-air operation.
As far as I am concerned, if my K3 seems OK to me then it *is* OK.
-
Julian, G4ILO K3 s/n
it in the first place) and this is probably more
true of radio hams than computer users in general since most of us are
getting to the age when it isn't so easy to remember stuff.
Now what was the point I was making...? :)
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm
.
2. As mentioned elsewhere by Eric, 5dB worse IMD in SSB. Considering the
difference between 100 and 120W won't be noticeable at the other end, it
isn't worth using it.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View
it will be possible to access it through the Elecraft
website in the near future?
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/Nabble-2-tp17881717p17881717.html
Sent from
is in use for receiving.
It *does* make a difference for the software developer, since if you are
changing the frequency by software control you have to figure out which VFO
is being used. For the K3 you just set VFO A every time, which is simpler.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's
, I think.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-Split-Operations-tp17839491p17846944.html
Sent from the Elecraft mailing list archive at Nabble.com
Carl Clawson wrote:
Thanks, Wayne. I was unaware of the AC feature. I'm using it as a STOP
in
a logging program; would've said so had I known about the other usage.
My program is using it as STOP too - I have not observed this problem.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's
settings are getting lost or confused as well.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/Fw%3A-K3---SSB-levels-tp17842353p17843721.html
Sent from the Elecraft mailing
is not enabled.
73 Dave, G4AON
That's definitely the issue I identified, which Wayne fixed yesterday.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/Fw%3A-K3---SSB-levels
been able to find it again.
Perhaps someone knows where it is.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/phase-detector-for-tuning-magnetic-loop-tp17844244p17844669
the Elecraft MH2 too.
Thanks for info
I0CG Giuliano ITALY
K1 # 1524 modified for SSB,
The connector may be the same but Icom wires their mic plugs differently.
Still, I can't imagine that being much of a challenge to someone who
modified a K1 for SSB. :)
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
to separate the decoded text from other responses sent by
the radio.
All the KComm documentation is on my web site, so you can find out
everything you may need to know about the program by visiting
http://www.g4ilo.com/kcomm.html . Enjoy!
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack
me concerned.
I have the 2.00 firmware.
How could he tell? When tuning in an SSB signal, the frequency could vary by
+ or - 100Hz or more according to personal taste, especially if you don't
know what the other guy's voice really sounds like.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's
in, and continues to put in,
developing and supporting it. But it is not for me, and until today I
thought I was in a minority of one!
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com
the fan by
itself when the temperature rose above thresholds defined in the firmware.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/PA-Temp-tp17646931p17652206.html
Sent from
change command won't do anything.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/Re%3A--K3-More-on-changing-band-mode-and-filters-don%27t-tp17576785p17579881.html
Sent from
as well.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-Memories---Band-changing-etc.-tp17561737p17562868.html
Sent from the Elecraft mailing list archive at Nabble.com
Bill W4ZV wrote:
Sorry you had a bad experience and I hope this helps others!
Yep, it helped me to decide not to even *think* about doing it!
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context
allow memories to be edited on the PC as well, that
would certainly be a bonus!
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3---More-on-memories---I-think
it.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3%3A-too-easy-to-overwrite-dial--memories-tp17527947p17539733.html
Sent from the Elecraft mailing list archive
-generated PSK mode, but I did test
it recently by monitoring on another receiver and it decoded OK. There have
been a couple of updates since then, though.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message
on regular parts
these days. If there are any old timers able to work with these parts, I
take my hat off to them.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3---HAGCMDKT-mod
Yves Dussault wrote:
I would like suggestions on interfacing the K2 and suggestions...
If you like the simple approach: http://www.g4ilo.com/k2psk31.html
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View
+5.5=14.5.
9-5.0=4.0. 9-5.5=3.5.
Sorry, I don't see how that isn't true. I'm sure I can also recall some
published transceiver designs that took advantage of this fact to provide
two band coverage using a single VFO and 9MHz IF.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack
) but it seems to work OK so I haven't investigated further.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-FM-Operation-tp17457370p17458571.html
Sent from the Elecraft
have room for.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/-K3--Logging-programs-and-internal-keyer-tp17451428p17458853.html
Sent from the Elecraft mailing list archive
.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-FM-Operation-tp17457370p17461718.html
Sent from the Elecraft mailing list archive at Nabble.com
phones, TV set top boxes, burglar alarms and goodness knows what else that
you just get used to them. If some of them were actually generated from
within the K3 I would never know.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
eagerly ramping up production as fast as they could but,
like Elecraft, refused to compromise quality in the process.
The result was one of the most successful automobile companies in history.
They're a good example to follow.
As long as you forget about Ralph Nader. :)
-
Julian, G4ILO
points. So unless the changes made in production
were done in such a way that the board still looks the same, I must assume
my K3 does not have the mod, and possibly others post S/N 211 haven't
either.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums
me.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-noise-blanker-tp17338480p17379116.html
Sent from the Elecraft mailing list archive at Nabble.com
? Not to mention all the noise a computer
generates.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3%3A-bandscope-etc-etc-tp17338453p17339597.html
Sent from the Elecraft mailing list
self contained, or it would use an
inexpensive portable LCD TV for its display. Perhaps Elecraft will come up
with something like this in the future?
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context
at Zerobeat you can find where to download the last version that works on
the standard Eee PC OS.
From what I have read there are now other small, cheap Linux based laptops
that could easily be used as a simple data modes terminal besides the Asus
Eee PC.
-
Julian, G4ILO K3 s/n: 222 K2 s/n
the K3 came,
but I'm sure it wasn't 13.50, and I was able to pay the driver as well so
delivery wasn't further delayed. I think UPS is probably the best option for
all but the smallest items.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums
. Type TT0;
to turn it off again.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/Operating-from-the-Terminal...-tp17268019p17268998.html
Sent from the Elecraft mailing list
this reflector!
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-Shipping-to-UK-tp17273511p17273858.html
Sent from the Elecraft mailing list archive at Nabble.com
afford one (or manage to carry it up the stairs
without hospitalizing myself with a back injury!) The K3 is just about
perfect for my situation.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context
to try building something that he would
have to know CW to use. I doubt if you'd need to ask for help, just explain
the problem and they'll be queuing up to assist.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View
bug free updates.
Worth thinking about the next time a K3 software update breaks something...
We're all beta testers now.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/-OT
of legal action against the copier-person. Further, the original
owner must often prove MEASURABLE damages from the copying not easy in
many cases. Consult your lawyer. 73 Charles Harpole [EMAIL PROTECTED]
Charles [EMAIL PROTECTED]
I have Copyright © 1998 - 2007 Julian Moss, G4ILO
want to be forced to use a lower frequency.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/Zero-beat-hint-and-why-800hz-maximum--tp17231065p17235282.html
Sent from the Elecraft
a pair of center loaded mobile
whips back to back?
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/Packing-the-Buddipole-antenna-tp17195403p17204793.html
Sent from
adjustment of it into 50 ohms will be
lost. If the ATU is automatically bypassed when I select the antenna that
doesn't need it, nothing happens if I press the button in error. And believe
me, I often press things in error.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
before, and probably it is possible to
assemble a K3 taking the same care I have for most of my life when handling
static sensitive components, but given the cost of the K3 components I
decided it wasn't worth risking it.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
things I've asked for that I'm
still waiting for.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K2-v-K3-tp17106006p17108887.html
Sent from the Elecraft mailing list archive
than 6KHz?
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-FM-filter-required-for-full-AM-receive-width-tp17052986p17053976.html
Sent from the Elecraft mailing list
it was before.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/Bass-in-audio-is-good-tp17053403p17053981.html
Sent from the Elecraft mailing list archive at Nabble.com
or another.
Lower deviation is needed on 10m where there is no strict channelization and
people tend to operate on 5KHz multiples than on 2m where 12.5KHz (15KHz in
the USA?) channels are the norm.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums
than the 2.7KHz
crystal filter I guess it lets you hear a bit more bandwidth, but it's a bit
misleading. The AM filter is quite sharp already so I doubt if allowing the
DSP to be wider would gain you much.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums
to an equivalent standard.)
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/VFO-A%3EB-tp17064615p17066400.html
Sent from the Elecraft mailing list archive at Nabble.com
, but mistakes happen. I still would rather have had the
experience of assembling the K3 than avoid these minor issues by having it
ready built.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http
modes like CW and FM do give 5W out.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/MCU-1.88---DSP-1.70-tp17060678p17066967.html
Sent from the Elecraft mailing list archive
that are widely used. Hence it supports RTTY and PSK31
but not MFSK, Olivia and many other modes that would probably be used by a
greater number of operators if they were available than a beacon mode.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums
frequency.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-FIRMWARE-UPDATE%3A---MCU-1.87%2C-DSP-1.69---%28Finally%21%29-tp17041394p17044805.html
Sent from the Elecraft mailing
what you mean. Building a K3 from discrete components
would have been way beyond my ability anyway, but I did enjoy assembling it.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http
and the scratchiness is detectable even
at low mic gain settings.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-FIRMWARE-UPDATE%3A---MCU-1.87%2C-DSP-1.69---%28Finally%21%29
and
send something, I only get about 0.2W! I have to change mode to CW and then
back to SSB and then the power out in PSK D is correct.
Unlike someone else who reported low output on SSB my own aaallo testing
has found nothing amiss in this mode.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's
is what you would expect at that
level. If I then press TUNE, and then try transmiting in DATA A again,
either a pure tone or an idle signal, the output reverts to the lower level
again.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
a matter of personal
preference, then I can't use TX EQ to adjust it to my liking as long as
there is only one TX EQ setting for all modes.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http
... :)
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3%3A-nice-feature-%22FM-off%22-tp17049376p17052347.html
Sent from the Elecraft mailing list archive at Nabble.com
Bill W4ZV wrote:
Elecraft brings new meaning to the phrase customer responsiveness!
AD6XY Q: Sun May 4 06:42:20 EDT 2008
K6KR A: May 4 09:11:35 EDT 2008
G4ILO Q: Sun May 4 07:06:38 EDT 2008
KK7P A: Sun May 4 14:47:18 EDT 2008
NW8L Q: Sun May 4 02:39:45 EDT 2008
KK7P A: Sun
think there is anything wrong with the power meter calibration as
PWR=5.0 produces 5W on CW and FM, but how exactly is the low power wattmeter
calibration supposed to work?
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View
, and you'd probably
benefit from putting a resistive attenuator in the output.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-FW-1.87-problem-tp17052474p17052722.html
Sent
there, but that's not going
to happen...
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3---Linking-the-VFOs-for-CW---SSB-switching-tp17008996p17024191.html
Sent from the Elecraft
Dave G4AON wrote:
No sign of any spurious signals on my K3 on 3.721 MHz... No idea what
the problem with your K3 may be.
No sign of one here, either.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message
it and support it. But yours might
work, and might even have the same chipset and use the same drivers.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/KUSB-question
a problem try telling
the software the K3 is a TS-2000.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/RTTY-ON-K3---PY5EG-tp16946058p16982422.html
Sent from the Elecraft
order has just gone in for the PA upgrade to my K3.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-10-mojo---discovered-the-source.-tp16980794p16987194.html
Sent from
already owns one and has a
K3 might be able to answer. Since the K3 has a built-in two tone generator
for making PA IMD measurements, could the KK7UQ IMD meter be used to measure
SSB IMD performance too, or is it calibrated purely for PSK use?
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's
memories are per band as
well.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3%3A-VFO-B-follows-band-changes-on-VFO-A-tp16924349p16924521.html
Sent from the Elecraft
when operating so for other antennas I
do rely on the K3 power meter to confirm that I am running the correct
amount of power output.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http
, which is not as I would expect. It is
as if the ALC is not working to limit the power. I know it won't help the
linearity but that is beside the point in this context. If you set the power
control to 5W you don't expect to see the meter showing 10W.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's
. I know the K3/100 is specced at key-down for 10 minutes at full
power, but I'd like to know whether the K3/10 is OK at 10W or even 12W for
continuous duty modes.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View
is released.
It's possible a click could occur when the switch is connected that is
causing this spike.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-Mic-Gain-vs-ALC
.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3%3A-PC-boards---lead-free--tp16521773p16522543.html
Sent from the Elecraft mailing list archive at Nabble.com
and what is it
made of?
Sounds like somebody is exaggerating, as is usually the case when people
start boasting that my knob is bigger than yours. :)
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context
or worse than another when it is the component holding the
microphone that really determines how clean the transmitted signal is?
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http
fast
and it will operate like compression creating many IMD products.
But I am not an expert and am interested in what they have to say to this
hypothesis as well.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View
Geoffrey Mackenzie-Kennedy wrote:
Julian G4ILO wrote:
The design of ALC systems is not a casual matter especially when dealing
with human speech, and the points which you raise have to be addressed by
the designer if the ALC might be used improperly. It would appear that ALC
systems
a working radio?
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View this message in context:
http://www.nabble.com/K3-HABC-mod---stop-press%3A-WHAT-DATE--tp16412042p16416913.html
Sent from the Elecraft mailing list archive
underneath after 3 or 4 minutes,
and the K3 doesn't seem to be much different in that department. With the FM
capability it would be nice to be confident what power level is OK.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View
to spend money.
g
Personally I can't imagine how crimping an APP would be better than
soldering it - quicker, yes, but better? I'm sure the difference won't be
detectable by the guy you're in QSO with!
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums
801 - 900 of 1395 matches
Mail list logo