).
--
From: Ron D'Eau Claire r...@cobi.biz
Sent: Tuesday, September 03, 2013 5:28 PM
To: 'Reflector Elecraft' elecraft@mailman.qth.net
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
An interesting point I noticed modeling a 43 foot vertical was that, while
on 10 meters
Definitely a loaded question. No pun intended. I don't have any
experience with 43 ft verticals myself but have heard a lot about them
and have been thinking about building one. I too would like to learn more.
Matt Moller
KG6KSL
K3 #3496
On 9/2/2013 4:10 PM, Jim Brown wrote:
43 ft verticals
most people I have heard running a 23 or 32 ot 43 foot vertical all use
a 4:1 and a 1:1 inline...
I hvae also been reading articals where a 5.1 rf coil is used.
--
R.Neese
KB3VGW
__
Elecraft mailing list
Home:
Dave WX7G wrote an article that may be of interest:
www.eham.net/articles/21272
I also have some info in the “Presentations” section of my website at
www.ad5x.com.
As Jim says, if you use good quality coax over reasonable distances (I use 1/2”
heliax over a 60-ft run), SWR-related losses are
On 09/03/2013 06:29 AM, Phil Debbie Salas wrote:
I also have some info in the “Presentations” section of my website at
www.ad5x.com.
Phil's The 43-Foot Vertical presentation is very well written and
contains a wealth of good information.
Phil references a 10 Ohm ground. Using the information
On 9/2/2013 11:18 PM, Matt Moller wrote:
I don't have any experience with 43 ft verticals myself but have heard
a lot about them and have been thinking about building one. I too
would like to learn more.
The reason for my post asking for experience with this antenna and the
Elecraft tuner is
--
From: Jim Brown j...@audiosystemsgroup.com
Sent: Monday, September 02, 2013 7:10 PM
To: Reflector Elecraft elecraft@mailman.qth.net
Subject: [Elecraft] 43 Ft Vertical and Elecraft Tuners
43 ft verticals have become a popular antenna, and while they have some
strong
Thanks Mike. Your observations about radiation angle and performance
are in good agreement with my modeling. Yes, the secret sauce is that 43
ft is 5/8 on 20M.
73, Jim K9YC
On 9/3/2013 11:17 AM, mikefur...@att.net wrote:
Hi Jim,
I use exactly that here in Tampa. My antenna is a stealth 43'
An interesting point I noticed modeling a 43 foot vertical was that, while
on 10 meters the main lobe is up around 50 degrees, the gain at low angles
is similar to a 1/4 wave ground plane antenna cut for 10 meters. That's
because the longer antenna has significant gain over a 1/4 wave antenna so
YES! You've hit the nail beautifully on the head, Ron. I just finished
preparing slides comparing a 43 ft ground-mounted vertical with a good
radial system on 20M, 15M, and 10M with a classic ground plane at 30 ft
and vertical dipole with a base at 30 ft for those bands.Looking at
performance
This has been an excellent discussion on the 43 foot vertical. I have one
installed in my back yard (DX Engineering). Very happy with it overall. It's
been an excellent performer on 20 meters, and good on other bands; I'm a casual
DX-er, but have worked 5 continents SSB with the 12 watt output
On 9/3/2013 5:23 PM, Jim Brown wrote:
The practical problem with sticking a ground plane on your roof is that
it needs at least two radials per band, but there are several multiband
antennas for those bands configured as vertical dipoles that work well
without radials. That's the basis of my
On 9/3/2013 7:30 PM, Fred Jensen wrote:
With the KPA500 at 500W, on 40m, I get a lot of RF from the GAP
screwing up things like the WinKey, the laptop, and various other
digital gadgets.
The first thing I would do is put a serious ferrite choke on the coax at
the antenna. If that doesn't
...@audiosystemsgroup.com
To: elecraft@mailman.qth.net
Sent: Tuesday, September 03, 2013 11:03 PM
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
On 9/3/2013 7:30 PM, Fred Jensen wrote:
With the KPA500 at 500W, on 40m, I get a lot of RF from the GAP screwing
up things like the WinKey
to tangles.
73, Charlie k3ICH
- Original Message - From: Jim Brown
j...@audiosystemsgroup.com
To: elecraft@mailman.qth.net
Sent: Tuesday, September 03, 2013 11:03 PM
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
On 9/3/2013 7:30 PM, Fred Jensen wrote:
With the KPA500 at 500W
I use paralleled dipoles here, and I have limited the number of bands on
a single feedline to 3 bands, so I have one for 20, 15, and 10 meters,
and another for 30, 17, and 12. The wires are spaced about 1 foot apart
with PVC spreaders.
Tuning them is a bit of a challenge, but if one tunes
On 9/3/2013 9:16 PM, Don Wilhelm wrote:
I use paralleled dipoles here, and I have limited the number of bands
on a single feedline to 3 bands, so I have one for 20, 15, and 10
meters, and another for 30, 17, and 12. The wires are spaced about 1
foot apart with PVC spreaders.
I like fan
43 ft verticals have become a popular antenna, and while they have some
strong points, they present a very high SWR on most bands, so they
require a serious tuner to get them to load.
I'd like to know of any stations using a 43 Ft vertical as a multi-band
antenna using nothing but an Elecraft
Good question... I would like to know too.
A wise man once said nothing
On Sep 2, 2013, at 5:10 PM, Jim Brown j...@audiosystemsgroup.com wrote:
43 ft verticals have become a popular antenna, and while they have some
strong points, they present a very high SWR on most bands, so they
I know this isn't an answer to the basic premise of the raised question,
but let me throw this out.
1. 43 ft. verticals that are ground mounted require a large, good ground
system.
2. Depending on the band you are operating, the assumption of a high
VSWR is correct.
3. High VSWRs on coax are
One can feed the 43 foot vertical with ladder line, and do the tuning in
the shack (yes, you can feed a vertical with balanced line), but if
feeding with coax, the best place for the matching network is at the
base of the antenna. Coax is good for an swr of 2.0 or less (depending
on the
with great success
along with many stateside contests.
73
George Osier , N2JNZ
-Original Message-
From: Jim Brown
Sent: Monday, September 02, 2013 7:10 PM
To: Reflector Elecraft
Subject: [Elecraft] 43 Ft Vertical and Elecraft Tuners
43 ft verticals have become a popular antenna
.
73
George Osier , N2JNZ
-Original Message- From: Jim Brown
Sent: Monday, September 02, 2013 7:10 PM
To: Reflector Elecraft
Subject: [Elecraft] 43 Ft Vertical and Elecraft Tuners
43 ft verticals have become a popular antenna, and while they have some
strong points, they present
.
73, Ron AC7AC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Barry LaZar
Sent: Monday, September 02, 2013 4:32 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
I know this isn't
-boun...@mailman.qth.net] On Behalf Of Ron D'Eau Claire
Sent: Monday, September 02, 2013 7:04 PM
To: 'Barry LaZar'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
Barry, Number 1 is true if, and only if, the antenna is used below 14 MHz.
It's all a matter of feed
Don#x27;t worry about remoteing the tuner, but ditch the RG8X and use RG8 with
the least loss you can find.
George,W6GF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
26 matches
Mail list logo
