After much debate, I've decided to part with my trusty sidekick KX1, only to
raise money towards my upcoming K3. Yeah, I know, two completely different
rigs with two different missions, but they're both related to dollars ;-)
More details and photos can be seen at
Hi,
I have for sale a K2 with KSB2 and KDSP2. It is nicely built and aligned. It
is serial number 5108. Asking $850 insured and shipped to CONUS. Paypal OK.
Thanks for looking.
Theodore W. Wong K6OI
[EMAIL PROTECTED]
___
Elecraft mailing list
For sale: K2. S/N 00502. K2 version 2.04P/1.09; KSB2 1.08b.
Options furnished: KAF2; KSB2; K160RX; KNB2; KAT2. Kenwood hand
microphone. Documentation and manual included.
Updated and recalibrated November 2007 by Gary Surrency AB7MY of
Elecraft. Radio is currently at Elecraft. Excellent
Hi All I have a Fully loaded assembled K2/100 for sale. This radio is new built
for sale and consists of the following: K2 - radio s/n 5363KSSB - sideband
adapter 2.6KhzKAF2 - Audio filterKNB2 - noise blankerK160RX - 160 meter Receive
antenna inputKPA100 - 100 watt amplifierQRP Lid with KAT2 -
I have new assembled KX1 For sale with the following options:
KX1 - Radio
KXB3080 - 30 and 80 meter module upgrade for 4 bands
KXAT1 - internal antenna tuner
KXPD1 - paddle kit
The price for all of the above from Elecraft is $522
I am selling for $500 plus shipping check or money order only
All modules have been sold, thanks for the interest.
--
JT Croteau, N1ESE - Manchester, NH (FN42gx)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
I'm selling the following Elecraft mini-modules, all are assembled and
working fine:
N-Gen - Wideband Noise Generator - $25.00
XG1 - Signal Generator - $25.00
DL1 - Dummy Load - $15.00
Would prefer to sell all three for $50.00 delivered anywhere in the
US. PayPal preferred.
--
JT Croteau,
Selling my K2 #6233 that I just put on the air on October 2nd. Rig
works perfectly, I have 147 QSOs logged since 10/2. It is configured
as follows:
K2
K160RX
K60XV
KAT2
KIO2
KSB2
KNB2
MH2 Hand Mic
When I built it, I used Rework Eliminators (http://unpcbs.com/) so if
I ever wanted to remove an
Selling my recently built XV50 transverter. It works fine, I have 3
QSO's with it, but I find myself obsessed with a new project I want to
build. It comes with the crystal oven installed but no DB9 connectors
or wire to build a control cable if you want to use it with a K2.
New cost from
I am forwarding this on behalf of my good friend and fellow QRPer Norm
K9NK:
I am selling my complete FT-817 station for a reduced
price of $675 including shipping. All in Excellent
Condition,non-smoker.
Please contact me at
[EMAIL PROTECTED] 73's -- Norm K9NK
FT-817 - has 60 meter mod - all
Tuner is spoken for. Thanks!
73 Dub
At 08:15 PM 10/4/2007, you wrote:
Excellent condition, inside and out, with one very small
exception. The thin inner web of the antenna selection knob was
split, probably by over tightening the set screw, which is a fairly
common occurrence, especially
Hi gang,
I have a perfectly functioning KAF2 Audio Filter for
the K2 that I am willing to sell for $60 to be paid by
U.S. Postal Service Money Order, and I'll pay for
shipping within the U.S. or Canada.
If you're interested, please email me at [EMAIL PROTECTED]
Thanks very much 73,
Jeff, NE2J
FOR SALE:
Elecraft KX-1, KXB30 and manual. $325
Ten-Tec Scout 555 with noise blanker, Mic, 80m, 20m, 10M band modules
and manual. $375
WRL Electronics Globe Matcher, Sr. Model AT-4 antenna matcher and
manual. $125
Plus actual shipping.
TNX es 73,
D. A. Mike Michael W3TS
Hi Guys,
Like alot of you I am patiently waiting for my K3 to arrive. The K2 that
I am currently using will be relegated to portable, QRP only, status.
As a result, I am selling a KPA-100 100 watt amplifier and a KDSP-2 dsp
filter. Both were built with care and work great.
I am asking $325.00
I have a built Elecraft KX1 for sale with the KXB30 30 meter module, KXAT1
automatic antenna tuner and the KXPD1 paddle. It has a fresh set of lithium
batteries installed.
$485 shipped Insured Priority Mail to your USA QTH. DX (outside of the USA)
please contact me and I can provide
Hi gang,
Well it looks like if I want a new K3 before Xmas I better get my order
in now... but the XYL sez somethings gotta go first. (Too many toys :-( )
So I have for sale my beautiful, fully equipped K1 w/ALL accessories
available:
K1 ser #20xx 40,30,20,15 meter bands
KAT1 ATU
KNB1
I have a KDSP2 that was built and installed in January 2007. I have played
with it and find that it works fine. However, being an old CW op I prefer to
use the anatomical filter between my ears!!
If you have a KAF2 and want to try the KDSP2 it will go directly in place of
the analog filter.
HI,
I have just finished installing a Steppir . Now I have all antennas with less
than 1.5:1 SWR and this ATU is is out of a job.
The linear is three years old and in excellent condition. It has never left a
centrally heated room in a non-smoking household.
My location is Redditch in
Hi,
The kit for this was bought late last year for use in this year's Es. I have
just finished assembling it and setting it up. It works fine.
Now I have a K3 on order and it includes 6M. So rather than change the station
wiring around etc, I will continue with my other rig on six and
But my other rig is a K2 and it is NOT for sale ;-)
Doug,W6JD
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Ditto... although I don't love my K3 yet (I fully expect that I will
in about September, though).
73,
Larry N8LP
[EMAIL PROTECTED] wrote:
But my other rig is a K2 and it is NOT for sale ;-)
Doug,W6JD
___
Elecraft mailing list
Post to: Elecraft
My other rig is... For Sale.
My other rig is not for sale and my other, other rig is also not for
sale. Poor choice of T-Shirt slogan if you ask me.
The difficult bit will introducing them to each other. #885 is still a
bit jealous of #3248... How's that for anthropomorphising?
vy 73 de
An option that Vic, K2VCO, suggested that I liked better was:
My other rig is...lonely.
I'm not much for anthropomorphizing but I know full well how things become
part of my mental landscape. Anyone who has felt the deep emotional
violation of having had something taken from them in a fire or
Toby Deinhardt wrote:
My other rig is... For Sale.
.
The difficult bit will introducing them to each other. #885 is still a
bit jealous of #3248... How's that for anthropomorphising?
I name mine:
KX1: Squirt
K2: Clark [able to leap tall pileups with a single bound]
TS-850: Tubby
MY 'other-other' rig (TS-950SD) _DEFINITELY IS_ for sale! Though my
'other' rig (K2) will remain with me for YEARS!.
73,
Tom N0SS
At 01:28 PM 5/21/2007, Toby Deinhardt wrote:
My other rig is... For Sale.
My other rig is not for sale and my other, other rig is also not for
sale. Poor
And folks, I *will* have my extra K2/100 SN 4192 available for sale -
like Tom, my SN 00020 will *never* be up for sale.
This is a fully upgraded K2 and is fully loaded - including 160 and 60
meter options (with KAF2 rather than the KDSP2). Total value of the
unbuilt kits is $1363, and I am
.
Ton kf4yyd
-Original Message-
From: [EMAIL PROTECTED] [mailto:elecraft-
[EMAIL PROTECTED] On Behalf Of Toby Deinhardt
Sent: Monday, May 21, 2007 2:29 PM
To: Elecraft
Subject: Re: [Elecraft] For sale?
My other rig is... For Sale.
My other rig is not for sale and my other
I have FOR SALE a KX1 transceiver 20/40 meter version with built in KXAT1
automatic antenna tuner. This radio worked perfectly until I added the
30/80 meter module and then nothing worked. I removed the 30/80 meter
module and restored the radio to original condition (I think).
It now works
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Benton Webb
Sent: Saturday, May 05, 2007 4:22 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] FOR SALE: KX1 with KXAT1 ANTENNA TUNER
I have FOR SALE a KX1 transceiver 20/40 meter version with
built
FOR SALE: K2 QRP top cover complete with KAT2 20 watt antenna tuner,
speaker, all connectors and wiring as originally built. Tuner works
perfectly. Cover is spotless, scratchless, just like new. $140 shipped to
your doorstep.
Please contact off-list if interested. Thank you.
Paul Webb,
XG-1 Test Oscillator Kit.packaged never opened.
$32 shipping included.
73
Elliott WA6TLA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Sold
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
k2 with everything. email me and lets negotiate
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
The first of many!!
From: Bob Blair [EMAIL PROTECTED]
Date: Sat, 28 Apr 2007 10:48:41 -0500
k2 with everything. email me and lets negotiate
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
Hakko 936-12 soldering stations are ON SALE at Wassco -- $ 81.50
until April 23, 2007
http://www.wassco.com/saleitems.html
w9gb
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
For Sale: Elecraft AF1 Active Audio Filter. Built nicely and working
fine.
Specs are at www.elecraft.com under Mini Modules.
$48.00 plus $8.00 shipping Sell only to the lower 48 states. Paypal.
I have two of them.
--Bob W1XT
K2 #1434, K2-100 #5812, KX1, + +
Surprise, Arizona
Hi
I am selling one of my K2s
Elecraft K2 QRP version
Serial 4271
Options
160m and second antenna
KIO2 Serial interface
Works fine - £450
Also KAT2 QRP ATU £50
Clearing out the shack
73 Bob G3PJT
___
Elecraft mailing list
Post to:
For sale K2 # 5619 + KSB2, brand new, built last summer and autumn, because
I like building these kits. Asking EUR 600.00 plus transport to your home.
If you want, it is possible to add all other options you want at cost-price.
Pictures are available. Please respond off list.
Gerard PA1GP
I have for sale one Black Widow Paddle by W5JH. I had it assembled and was
not happy with the finish on the brass so I disassembled it and it has been
in a plastic tray for quite a few months. I resanded the base and never
went back to it. So it's basically a kit again that has been sanded a
If anyone needs an already built KXB30 30M adapter for
their KX1, I will sell you mine for $12 (includes
postage). My KXB30 works perfectly but is no longer
needed for my KX1.
I have the already-built KXB30, and its 8 page
Assembly and Operating Instructions ... all in mint
condition.
Mike
I have for sale a 120W version of the LP-200 Dummy Load/Digital Wattmeter by
Larry Phipps - N8LP. The meter is assembled and works great. Check out his
web site for all the info and pictures you could want on the LP-200. Larry
makes great products. I think they are as good as Elecraft's and
The meter has been sold.
Roger, W1EM
-
-I have for sale a 120W version of the LP-200 Dummy Load/Digital Wattmeter
by
-Larry Phipps - N8LP. The meter is assembled and works great. Check out
his
-web site for all the
I have a K2 serial number 1661 for sale or trade. It is in good
electrical and physical condition. It has the following options:
KAT2 - Internal 20W tuner
KSB2 - SSB option
K160RX - 160 m
KNB2 - Noise Blanker
KBT2 - Internal battery kit (new battery from Elecraft last week)
KAF2 - Audio
Hi Group,
I have recently upgraded my amplifier keying with Tom's kit. In the past,
Elecraft also sold an amp keying kit at US$5 plus postage. This earlier
version consists of two 2N7000 with similar working principle of Tom's kit.
This kit is now surplus to me. It is a completed kit and
And, if you have the parts, I _do_ offer bare PC
boards for the kit for $6 (USD) ppd to your (US)
mailbox... $7 (USD) to DX addresses.
73,
Tom N0SS
At 08:05 AM 1/2/2007, Siu Johnny wrote:
Hi Group,
I have recently upgraded my amplifier keying
with Tom's kit. In the past, Elecraft also
FOR SALE: Brand-new Super Antennas MP-1 with Tripod.
Please see: http://www.superantennas.com/
This is a great portable vertical antenna that can cover 40 to 6
meters. Has sliding adjustable coil similar to the Yaseu ATAS-25.
The unit is rated for 150 watts.
$75 + $7.50 shipping.
The XYL
Build this kit last summer just for the fun of building another K2. I am
an electrical engineer and have been building kits for some 50 years. I
would like to sell it just at the price I payed for it, including
postage from the US and taxes (VAT) and including the US$ 50 Dayton
discount: EUR 675
Purchased kit a little over a year ago - decided to build the
KDSP2 instead. Please contact off list
73,
Jack KA1QG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
I have a new, unbuilt KXB30 option for the KX1.
If interested, make me an offer.
It is surplus to my needs as I have installed KXB3080 option instead.
Javier NM6E
K2 #4409
K1# 1103
KX1# 813
ARCI #11908
___
Elecraft mailing list
Post to:
Hello Elecraft builders,
I have the subject Auto Tuner for sale. In unopened package.
Bought as part of a K2 package. Previous owner never found building time.
$159.00 shipped. Pay-Pal or Postal type Money Order preferred. CONUS only.
Please respond off-reflector...
Thank you...
Ken,
Hi,
Well it looks like Murphy has struck me hard. I received a few inquiries
regarding the HP 8640b, some requesting
pictures. So I figured I'd show the generator into a frequency counter
and scope. I noticed some erratic readings
on the freq. counter, so I hooked up the scope and saw the
Hello all,
I have for sale an HP 8640B Signal Generator with options 001 and 003.
There is a problem with the frequency counter readout, the range switch
needs
a new front wafer for the readout to work properly. I know it needs a
new wafer because
there is a connecting finger missing from the
All items sold except the K2 below. Thanks for the responses.
Here's the details:
My father (K6AXS ex: KE0PG, WA0UMR now SK) built this K2 and
options in 2002. He became a SK in early 2003. I had the best
intentions to use it and subsequently bought additional
Elecraft kits and a
All items sold except the K2 below. Thanks for the responses.
Here's the details:
My father (K6AXS ex: KE0PG, WA0UMR now SK) built a K2 and
options in 2002. He became a SK in 2003. I had the best
intentions to use it and subsequently bought additional
Elecraft kits and a used
Elecraft K2 and multiple options for sale:
From: Charlie Hicks K0CKH
[EMAIL PROTECTED]
My father (K6AXS ex: KE0PG now SK) built a K2 and
options in 2002. He became a SK in 2003. I had the best
intentions to use it and subsequently bought additional
Elecraft kits and a
Update - some items sold.
Elecraft K2 and multiple options for sale:
From: Charlie Hicks K0CKH
[EMAIL PROTECTED]
My father (K6AXS ex: KE0PG now SK) built a K2 and
options in 2002. He became a SK in 2003. I had the best
intentions to use it and subsequently bought
Dear All:
I just built my second N2PK VNA using VE3IVM's board. So my first one
is now for sale.
Specs: As described in http://users.adelphia.net/~n2pk/
Built and tested by me in Fall 2005.
Built on Greg Ordy's board kit
The Valpey Fisher Oscillator is
Hello Fellow Elecrafters,
I have for sale a newly assembled, tested and aligned K2.
If anyone is interested in a professionally built (plug play) K2 please
check out this link:
http://www.w6nek.com/K2/5632.html
(caution, above link contains 15 photos, 2.37 megs - pretty slow if you have
a
Hello All,
The subject K2 has been SOLD.
Thank you for the response and comments regarding this K2.
73,
Frank - W6NEK
- Original Message -
From: W6NEK [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, July 31, 2006 3:47 PM
Subject: [Elecraft] For Sale New K2
Hello Fellow
I have the following items for sale:
1. Oak Hills Research SFF-1A Switched Capacitor Filter
Like new with manual. Bandwidths 108, 230, 383, 459
574, 2440 Hz. Great CW filter. $40.00 + 5.00 shipping
CONUS.
2. W9GR DSP-3 Like new with
I have for sale the following items.
K2/100 (s/n 4028 fully upgraded) with KNB2, KDSP2, KSB2, K160RX
KAT100
K2 Top Cover with KIO2.
EC2 enclosure with KAT100 panels
MFJ 1279 sound card interface
This equipment has been in continuous use since
For sale: KX1 serial #1447. It's about three months old. Included options
are:
KXB3080 Four Band Board
KXAT1 Auto Internal Tuner
KXPD1 Paddle
The radio works great and looks like new. I have built three K2s, a K1, two
KX1s, two Elecraft transverters, and just about all the
Selling my well loved K1 with four two band filter boards, ATU, and a
few accessories.
K1 #292 - 2 Band Model recently aligned for the following filter boards:
40/80
20/15
17/30
It will also come with a fourth filter board for 20/40.
KAT1 is included along with the tilt stand with only the
I have for sale KX1 serial #1447. It's about two months old. Included
options are:
KXB3080 Four Band Board
KXAT1 Auto Internal Tuner
KXPD1 Paddle
Six Slightly Used Lithium batteries
The radio works and looks like new. I have built three K2s, a K1, two KX1s,
two Elecraft
FOR SALE:
KAT100-1 150W automatic antenna tuner for the K2 and K2/100. New in box,
not built. Bought new from Elecraft in May 2005. $200+shipping.
Please contact me off-list at:
[EMAIL PROTECTED]
73,
Chris WT1L
___
Elecraft mailing list
Post
One last try before it goes to Ebay make me a reasonable offer if you
are interested. Thanks!
---
FOR SALE-
COMPLETE Elecraft K2/100 package, which consists of:
Elecraft K2/100 serial no. 4841, built, with these options installed:
- KPA100 100W amp (makes it a K2/100
Dear Elecraft List-
FOR SALE-
COMPLETE Elecraft K2/100 package, which consists of:
Elecraft K2/100 serial no. 4841, built, with these options installed:
- KPA100 100W amp (makes it a K2/100 instead of a regular K2). The KPA100
also includes the computer (serial) interface.
- KDSP2 DSP module
Good Morning!
Do you still have your K2?
Rodger, K6JET
cell 858 204-7911
___
Elecraft mailing list
Post to:
I have for sale, a high serial number K2,serial # 5116. Included options
are:
K160RX 160 Meter/2nd RX Antenna Option
KAF2 Audio Filter and Real Time Clock
KAT2 20 Watt Internal Tuner
KIO2 RS-232 Interface
KNB2 Noise Blanker
KSB2 SSB Option
The radio works and looks
I forgot to mention that also included with the K2 are the K2 VCO Magnetic
Field Shield Kit and the KSB2 Wider Bandwidth Capacitor mod. The SSB audio
sounds great. Both are installed and will be included without additional
cost.
Roger Marrotte, W1EM
I have decided not to remote my KPA 100, and therefore have for sale a new
in box EC2 Enclosure and a newly assembled KI02 Aux. I/O. I will sell both for
$140 or $55 for the EC2 and $85 for the KI02 including shipping CONUS. Please
contact me directly via email...thanks, Ci
Ci Jones, WU7R
Excess to my needs, I have an M-Squared OR2800 rotator and control box.
It is just back from M-squared where it was checked out and everything
replaced that was suspect. It is the older AC model. There is no rotor
cable with it. This is a used unit. I have used it to turn my VHF/UHF
antennas
I have for sale K2 #4595 with the following options.
KSB2
KDSP2
KAT2
KIO2
K60XV
K160RX
KBT2
Heil hand microphone.
All manuals and power cord. $1150.00 + shipping within US. If interested
please reply off list to [EMAIL PROTECTED]
The rig looks and works good. I have used on both CW and SSB
Hi all
I have decided to sell my K2 #3134, after a many good hours of QSO's
It is not because the rig is run down, on the contrary, but I have been
bitten
by that little bug that I fear rummage around in many shacks.
And I have got the building itch again, hi. But if I am to build another K2
I
I have a 250W amplifier for sale. It is an RM HLA 300. It is rated at 5W in
for 300W out for 10-160 M. It has automatic bandpass filter selection, swr
and over temp protection. This is a great accessory to any QRP station and
works very well with a K2 or FT-817. The specs say it will deliver 300 W
I have a wired and tested KPA-100 module for sale. Just replace the regular top
with this unit and you are ready to operate. It is complete with high current
cable and connector.
$450. including UPS from PA to lower 48 states.
Howard
___
Elecraft
For sale: Model K2/100 serial no 2580 with the following options:
KSB2 SSB module with F/W 1.08
K160RX160 meter module
KNB2 Noise blanker
FDIMP Finger dimple
MD2 desk microphone
Power cord
K2 top cover
Following A to B upgrades installed:
Firmware 2.04 K2 IOC 1.09
K2KEYMKDT keying
k2 100 BUILT BY A PROFESSIONAL. all the goodies installed expcept antenna
tunner. Not in use but works very well. Serial 40507 Hex Key can go with it
if desired (very good paddle incidentally)
Reasonable offer related to kits costs acceptable
Then next for sale is an ICOM IC756PRO II w/
Mint condition K2/100 for sale consisting of the following:
K2 (ser #35xx) w/latest firmware upgrades
KPA100 100 watt amp
KSB2 ssb adapter
KDSP2 dsp unit
KAT2100 external atu
KAT2 atu installed in orginal lid (great for portable use)
RS232 cable for connecting to computer and KAT100
DC cable
Loaded with goodies professionally done. KK7UQ interface for PSK.Cables
included.
Give me a reasonable offer and I'll pack and ship to your requirments.
73 Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
FS: KDSP2 assembled and ready to go. Works fine, I just like the KAF2
better. Asking $199.00 shipped. Please reply off list to
[EMAIL PROTECTED] . Thanks!
73's
Jack W4EFZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Gentlemen,
I have FOR SALE a brand new, still in original packaging, KAF2 Audio
Filter/Real Time Clock kit. Opened only to inventory parts. $30.00
delivered to your door by USPS Priority Mail. Will accept check or Pay Pal.
Please respond off-list. Thanks.
Paul, K5HKX
PAUL WEBB
[EMAIL
I have the following items for sale:
K2 - Xcvr(ser # 35xx) w/latest firmware
KPA100 - 100w amp
KAT100 - ATU
KSB2 - SSB adapter
KDSP2 - DSP module
All manuals, errata sheets etc included
Everything is nicely built and works to specs w/full power out on all
bands, no dings or scratches.
Asking
Late serial K2 with most accessories for sale at Elecraft prices.
Perfect condition electrically and physically
Telephone for full information 9a to 9p Pacific 360 638 2707
73
Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
I have for for sale the following.
K2 - Ser# 35xx
KPA100 - Amp
KAT100 - Ant tuner
KSB2 - SSB adapter
KDSP2 - DSP adapter
KAT2 - 20w atu w/ original lid
All cables, manuals and spare hardware etc. included.
Everything is nicely built and in excellent electronic and physical
condition w/full
Hi All,
I have for sale some Elecraft kits that are excess to my needs at this time.
K1 Upgrade Kit. Upgrades older K1s (s/n 1092 and earlier) to match current
K1s. $7.00 mailed.
KFL1-4 Trimmer Capacitor Upgrade kit. $10.00 mailed.
KAT-100 pre-wound toroids (By Toroid Guy) $27.00 mailed
Just sold my KX-1 and no longer need my T-1 tuner. It was factory assembled
and never used. 20 bucks off invoice shipped.
Phil
K2/KAT100
Philip LaMarche
LaMarche Enterprises, Inc.
www.instantgourmetspices.com
727-944-3226
800-395-7795 pin 02
FAX 727-937-8834
NASFT #30210
W9DVM
Since I have the K2/100 I have no need for the old top cover. This is
complete with KIO2 ($89 kit price), KAT2 ($159 kit price), KBT2 ($67 price),
with speaker and of course the cover itself. All ready to plug in and
operate. This is a $300+ value (not counting assembly time) for $225. Save
time
K2 #1568 v2.01f firmware,
KAF2 Audio Filter / Real Time Clock
KSB2 SSB Adapter, wired for Yaesu mic. using wire wrap
KIO2 RS-232 Adapter w/cable
KNB2 Noise Blanker
100 w amplifier in top.
Manual for both K2 and Elecraft 100 amplifier.
Microphone not
k2 top cover with kat2 qrp atu installed and kio2 rs-232 interface is for
sale for $195.00 shipped conus ups brown. paypal, M.O. Check. Contact
direct.
Reggie Southwest Bakersfield, CA.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
I may not have been completely clear in my for sale message so to make sure
I did not mislead anyone, What's for sale is NOT a k2 but the TOP COVER AND
KAT2 AUTO-TUNER AND KIO2 CONTROL INTERFACE.
THANKS,
Reggie
___
Elecraft mailing list
Post to:
FOR SALE:
Basic k2 qrp top cover with kat2 auto-tuner, and kio2 computer interface
with cable. and speaker.Includes all manuals. Has foam tape installed to
fit kdsp2 module. All work to specifications. Shipped for $255.00. Contact
off list please.
Reggie k6xr
k2/100 4112
I have for sale a Tandem Match Power / SWR meter, (ARRL handbook).
This a very accurate Power / SWR meter that I have build into a K2 project
enclosure.
It fits nicely on top or underneat of the K2. The power ranges are 5, 10,
50,
100, 200 and 500 Watt. The ranges are defined with high
We're moving! I'm selling off the bulky things.
I'm keeping only the tiny KX1.
All items are about 2 months old, if not less, and in near-new
condition, if not mint.
All prices include shipping and insurance!
For Elecraft items I've basically taken the new price and donated the
time/effort/cost
(added the ic-2200)
We're moving! I'm selling off the bulky things.
I'm keeping only the tiny KX1.
All items are about 2 months old, if not less, and in near-new
condition, if not mint.
All prices include shipping and insurance!
For Elecraft items I've basically taken the new price and donated
This is a brand-new, unbuilt K2, all packages still sealed, just as received
from Elecraft.
This fabulous dream rig has the following optional features:
K60XV - 60M RTR INF
KAF2 - Audio filter Real Time Clock
KAT2 - Automatic antenna tuner
KBT2 - Internal battery option
KIO2 - Serial port
For Sale: A K2 top cover with a KIO2, KAT2 and KBT2 installed in perfect
working order, ready to plug in and use. This top cover was put on the
shelf when replaced by a KPA100. I haven't used it since the first of the
year so I'm selling it. All items work great and are ready to go. The KIO2
The top cover and all options mentioned are ready to go. Just plug it in
and go. This top cover was replaced when I built a KPA100. It's been
sitting around for a couple of months so I'm selling it. All items work
great and are ready to go. The RS-232 cable is not built. The unbuilt
cable is
I don't use it so it's going. It's built and working ready to be installed.
I used it for a while but found the blinking light distracting, but it works
as advertised. Please make me an offer via email. I'll pay for shipping.
Please USA and Canada only.
Thank you,
Roger, W1EM
I have a KAF2 for sale. It's built and works great. It's ready to plug in
and use. It was replaced with a KDSP2. Please make me an offer via email.
I'll pay for shipping. Please USA and Canada only.
Thanks,
Roger, W1EM
___
Elecraft mailing list
801 - 900 of 917 matches
Mail list logo