Don,
Looks like I'll have to do that as it is happening on TUNE. I was
trying to elimate all the obvious problems first.
73
Colin, G3PSM
On 29/07/2017 17:22, Don Wilhelm wrote:
Colin,
Does the K3 shut down operating into a dummy load when TUNE is
selected? If so, then there is a
Colin,
Does the K3 shut down operating into a dummy load when TUNE is selected?
If so, then there is a problem with your K3 - contact support.
If it operates fine into a dummy load in TUNE, then suspect a PA
temperature problem.
It may be that you have a bad PA, but again the folks at
[mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of Colin
Sent: Tuesday, July 25, 2017 9:15 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Fwd: Re: K3 SHUTTING DOWN OPERATING JT65
Buddy/Mike, further to my earlier email the current on receive is actually
1.05A
as measured on a digital
My K3S does show the voltage and current on its display. In receive it
nominally is 13.8 volts and 1.05 amps. For transmit, CW mode key
closed 100 watts output the current is 18.5 amps. Both of these values
concur with my power supply metering.
I've experienced no shut down while operating
; From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
> boun...@mailman.qth.net] On Behalf Of Colin
> Sent: Tuesday, July 25, 2017 9:15 AM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] Fwd: Re: K3 SHUTTING DOWN OPERATING JT65
>
> Buddy/Mike, further to my earlier emai
Buddy/Mike, further to my earlier email the current on receive is
actually 1.05A as measured on a digital multimeter and not 5A as
indicated on the PSU analogue meter.
Of course this doesn't solve the immediate problem.
73
Colin, G3PSM
Forwarded Message
Subject:
6 matches
Mail list logo
