[Elecraft] K1 160m/80m

2006-01-31 Thread SteveG
Hi Folks, I've a couple of spare FIL-2 revD boards that I want to reload for fun. Put one on 40/80 and the other on 80m/160m(?). Here's my Qs: 1. Will the ATU handle 80m? ...and what about 160M? assuming I'm not trying to load a 'coat hanger' on 160! 2. Where can I get the info on putting K1 FIL

RE: [Elecraft] K1 160m/80m

2006-01-31 Thread Don Wilhelm
PROTECTED] Behalf Of SteveG Sent: Tuesday, January 31, 2006 7:11 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K1 160m/80m Hi Folks, I've a couple of spare FIL-2 revD boards that I want to reload for fun. Put one on 40/80 and the other on 80m/160m(?). Here's my Qs: 1. Will the ATU

Re: [Elecraft] K1 160m/80m

2006-01-31 Thread Sandy W5TVW
, January 31, 2006 7:08 AM Subject: RE: [Elecraft] K1 160m/80m | Steve, | | Putting a K1 on 160 can be done easily (see instructions below for one | method). Not too much effort. | The KAT1 will tune OK, but the range will not be as great as on higher | bands. | In my opinion, it is a pain to have 2

Re: [Elecraft] K1 160m/80m

2006-01-31 Thread Dave Sublette
PROTECTED]; elecraft@mailman.qth.net Sent: Tuesday, January 31, 2006 7:08 AM Subject: RE: [Elecraft] K1 160m/80m | Steve, | | Putting a K1 on 160 can be done easily (see instructions below for one | method). Not too much effort. | The KAT1 will tune OK, but the range will not be as great as on higher

RE: [Elecraft] K1 160m/80m

2006-01-31 Thread Mike Morrow
Don wrote: Note that the K1 will remember 6 bands... It is my understanding that the K1 will store *one* display calibration correction for each of the HF bands that can be assigned to a K1 band. Since each K1 band can be assigned to any of the nine HF bands, I believe that the K1 can

RE: [Elecraft] K1 160m/80m

2006-01-31 Thread Don Wilhelm
Mike, Unless it was expanded recently, the K1 can be set to any of the 9 HF bands, but it only has memory slots for 6 of them - one can choose any 6 of the 9 available bands. You are correct that only one correction factor for any one band is available. 73, Don W3FPR -Original

RE: [Elecraft] K1 160m/80m

2006-01-31 Thread Mike Morrow
Don wrote: Unless it was expanded recently, the K1 can be set to any of the 9 HF bands, but it only has memory slots for 6 of them - one can choose any 6 of the 9 available bands. Thanks. I've made the one calibration correction per each of nine bands statement many times before and never had

Re: [Elecraft] K1 160m/80m

2006-01-31 Thread Sandy W5TVW
[EMAIL PROTECTED]; Elecraft elecraft@mailman.qth.net Sent: Tuesday, January 31, 2006 11:44 AM Subject: Re: [Elecraft] K1 160m/80m | Sandy, | | What antenna did you use on 160? It must have beeen pretty good to have | worked that many stations. I ran 100W(TenTec Omni VI+) for the contest