Problem has been solved without doing anything. Thank to all whom tried to help
me. Back to fun again with my K2-4288.
73,
Ruchan Ozatay, TA2AH
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Mike:
GREAT CATCH!!!
I have NO CLUE why I didn't latch on to that when he and I originally
corresponded.
He still seems to have some unusual peaks/dips, but they may be related to
the fact that he seems to be driving the input to Spectrogram (and his
sound card) a bit hard. He and I are
Hello group!
My K2 (sn. 4408) has a strange fault. When my transverters, 50 Mhz and 144 Mhz,
are completely connected inclusive conrol cable (J6), but exept power, the hf
reciever is almost totaly muted after I have made a PTT on SSB. The fault is
not there on CW. If I change band, the signal
Vic Rosenthal wrote:
I just noticed a couple of very loud spurs on my K2/100 at 18086.6 and
28018.4 KHz. They have the following characteristics:
And now I hear another one on 24905.2. It must be a new 'feature' that I've
created, since I can't imagine that these have been there since the
10 15 are opening up but 20 Meters was also very good.
Just worked ES5JR (Juri) in Tartu, Estonia on 14,015 at 1539Z.
i was using my KX1 and an 8 foot whip in my rear pocket (w/top hat) and a 15
foot drag wire.
i am not sure he understood what /pm means.
i was working the FISTs contest guys on
Hi Gang,
I've been working lately at getting my average power to work a county down
below one watt. Well the mission came to completion yesterday. So it must
be time for a big celebration.
Earlier this week Jerry, NR5A/M of this list made a special effort to get
me Pennington, SD. It took
Nothing heard on #4398 ... just real signals.
Fred K6DGW
Auburn CA CM98lw
Vic Rosenthal wrote:
I just noticed a couple of very loud spurs on my K2/100 at 18086.6 and 28018.4
KHz. They have the following characteristics:
1) They tune funny -- each step causes a much larger pitch change
Vic:
s/n 744 is with KPA100.
dave
On Oct 24, 2004, at 4:13 PM, Vic Rosenthal wrote:
Fred, do you have a KPA100 or is your K2 QRP? I suspect that it might
be related to the KPA100.
Vic K2VCO
Fred Jensen wrote:
Nothing heard on #4398 ... just real signals.
Fred K6DGW
Auburn CA CM98lw
[EMAIL PROTECTED] wrote:
Must be the real time clock in the computer, or some associated circuits. It
runs off a coin cell, just like the RTC in the KAF2
I don't think so, for the following reason: there are lots of connections to
the PC in the shack, but disconnecting the serial port
I just finished the KX1 I picked up (well, ok I actually really didn't
pick it up, I did pay for it) at Pacificon. No problems at all, 4W @
12.6VDC from a gel cell, and got a reply in the FISTS C2C on first call
(well, ok, I DID pick a loud guy and was on the tri-bander). The KXPD1
was a quick
Good evening folks,
The Elecraft nets for this evening were interesting to say the least
:) The first one was getting called by rabid FISTs members asking for
numbers and I had lots of pileups to dig out. XL came through loud and
clear so I think Ric is a seasoned veteran of breaking a
11 matches
Mail list logo