Hi Tom,
I had my K2/100 driving an Alpha 87A at WP2Z for ARRL SSB test. The K2 got
quite hot and the fan ran a lot. But no ill effects other than keep your
hands off the cooling fins.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Tom Althoff
Heater
warmed up CW was flowing fine.
Happy Holidays.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of David
Sent: Tuesday, December 21, 2004 10:37 AM
To: Elecraft Reflector; David A. Belsley
Subject: Re: [Elecraft] RF build up
now this is why
When I use the K2/100 to drive an amp in a contest, CW or SSB, I can't keep
my hand on the heat sink. Running about 40-50w to drive the amp. Fan on
K2/100 runs continuously when running stations. There doesn't seem to be any
ill effects.
N2TK, Tony
-Original Message-
From: [EMAIL
don't have as strong a
signal. Just a thought.
Happy Holidays and may you have another box from Elecraft under your tree.
N2TK, Tony
#3481
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Alan Slusher
Sent: Tuesday, December 21, 2004 1:16 PM
To: 'Tony Davis
Don, thanks for all the help you gave many of us throughout the year. We do
appreciate it.
Merry Christmas. Now to go see what Santa brought me. Hoping for some Ham
goodies.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of W3FPR - Don Wilhelm
don't need QSK much as I mostly run stations. Using
semi-break-in while running is easier on the ears.
Happy New Year
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Hank Kohl K8DD
Sent: Sunday, December 26, 2004 7:06 PM
To: elecraft
to monitor 6M or another band with a transverter.
- One K2 is used as a backup rig at home and the spare can be taken along on
Dxpeditions.
N2TK, Tony
#3481
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of David
Sent: Monday, January 31, 2005 3:24 PM
-50W. Might have to move the K2 farther away and see if problem persists,
although it will be a pain to do that. Not sure yet if problem is definitely
the K2.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Earl W Cunningham
Sent: Saturday, March 19
type
setting system marked from 1.8-2.0MHZ. The settings would correspond to the
best swr for those frequencies. Use some kind of motor/selsyn drive on the
cap?
Would appreciate any feedback on ideas for this.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED
in the shack to
have minimum swr at the part of the band of interest.
73,
N2TK, Tony
-Original Message-
From: J F [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 31, 2005 1:48 PM
To: Robert Tellefsen; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Cc: 'Elecraft Discussion List'
Subject: RE: [Elecraft
back to a straight key. I have seen some folks who can send great CW with a
straight key. But I would bet they are in the minority.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Steve Jackson
Sent: Tuesday, April 05, 2005 8:49 AM
To: elecraft
it switch bands automatically when changing bands with your
transceiver, whether a K2 or other brand without having to send a dit?
What kind of SWR will it handle?
So, it sure seems premature to make a decision on the amp. That's what I
think.
N2TK, Tony
-Original Message-
From: [EMAIL
Hi Eric,
Yeah, same here. Bought the K2 for its size and performance to be used as a
backup rig at home and to take along on DXpeditions. It just happened to be
a kit which had very little to do with the decision.
Dayton is wonderful as usual.
#3481
N2TK, Tony
I'm still not entirely sure who
many, but I may be wrong.
73,
Marinos, ki4gin
#3481
N2TK, Tony
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Yep there is. It's a new amp
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
Dave G.
Sent: Friday, May 20, 2005 7:23 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Anything News at Dayton from Elecraft??
The subject says' it all ???
Hope
fall.
- It should handle SWR in the 3-4:1 range. It uses band-pass filters so
no-tune.
Bottom line - It looked real nice. I plan on getting one when it is
available.
Off to the airport to head home from another wonderful weekend at Dayton.
73,
N2TK, Tony
-Original Message-
From: N2TK
I am determined to do this correctly. Now I am sure I am sending the report
from the email address that is registered with the Elecraft reflector. Guess
I'm still recovering from Dayton. Sri for the mess-up on my part.
N2TK, Tony
-Original Message-
From: Tony Kazmakites [mailto:[EMAIL
Hi Karsten,
The reply to button should be a near the top of your toolbar for Outlook
or whatever program you are using. If it isn't there make sure your
standard toolbar is displayed. In outlook you go to View Toolbars and
click on Standard.
Hope that helps
N2TK, Tony
-Original Message
It has band pass filters in the output - similar concept to the K2/100. I
believe Eric said it is Pi-L. There is no antenna tuner in the amp.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
Lee Buller
Sent: Tuesday, May 24, 2005 11:19 PM
Hi Lyle,
I get the same message no matter whether in CW or SSB modes.
N2TK, Tony
-Original Message-
From: Lyle Johnson [mailto:[EMAIL PROTECTED]
Sent: Monday, June 13, 2005 1:50 PM
To: [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KDSP2 problem
Hello Tony
If I remember correctly the power supply is included. It is a switching
supply. With the smaller amp it is built-in. With the larger amp it is
external.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Simon Brown (HB9DRV)
Sent: Thursday, August
Just add a 1 between the KPA and the 500 :-)
Have a Happy Thanksgiving for the USA folks. Everyone else have a nice day.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob W9RFS
Sent: Tuesday, November 24, 2009
Ignacy,
Tnx for the input.
I am gong to order the Rev D DSP board with the low pass filter for one of
my K3's so I can compare to the other one.
Has anyone else applied all the fixes that UR5LAM has installed referring to
the 1st and 2nd mixer, IF amp, and Audio Freq Amp?
73,
N2TK, Tony
.
But thought I would ask.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick Green WC1M
Sent: Wednesday, December 23, 2009 5:31 PM
To: 'Dick Dievendorff'; 'Julian, G4ILO'; elecraft@mailman.qth.net
Subject: Re
Yes, and be able to select a different group of antennas using ANT1 and ANT2
on the K3 possibly using the DIGOUT1 signal tied into something like the
KRC2. Those who have say two antennas per band can select them from the
front panel of the K3 easily.
N2TK, Tony
-Original Message-
From
programs.
Merry Christmas
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Larry - K2GN
Sent: Thursday, December 24, 2009 8:42 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 needs survey -- firmware
Why not use HI Cut for SSB and WIDTH for CW. This way I find I usually do
not need to do anything with SHIFT for SSB.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Al Lorona
Sent: Tuesday, December 29, 2009 5
to YES to
listen out of either an external or internal speaker. But now I can't turn
off the speakers when plugging in the headphones.
Any ideas what could have happened?
Tnx for any feedback.
N2TK, Tony
__
Elecraft mailing list
there is no headphones
plugged in and SPKR + PH is OFF.
This is one of those problems where the night before it was fine and the
next morning it was not working. Power had not been turned off. In fact the
only time I normally turn off power is when I reboot after upgrading the
firmware.
73,
N2TK, Tony
at Dayton about contests
and contesters.
73,
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sandy
Sent: Monday, October 08, 2007 8:46 PM
To: David Thompson
Cc: [EMAIL PROTECTED]; Elecraft List; Glowbugs reflector
Subject: [Elecraft] Re: CX Report
resistant, but it may solve your problem.
73,
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Art Horne
Sent: Monday, November 12, 2007 6:50 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Co-ax for the K2
Greetings,
Can anyone recommend
Hi Mike,
I bought my TB Snap Seal connectors, stripper and tool at Home Depot.
It works well and easy to use. You don't use a crimper with these type
connectors.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike B
Sent: Sunday, November
. If I remember each of the insulated wires was
a quarter wave on 15, 20 and 40M. RF problems disappeared.
73,
N2TK, Tony
PS - K2 #3481 is ready to take back to WP2Z the end of February for ARRL SSB
Test.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Don
Totally agree with you, especially the QSK.
N2TK, Tony
#3481
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of DOUGLAS ZWIEBEL
Sent: Friday, May 04, 2007 9:19 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K2 improvements
In no particular order (all
I can't get above about 16WPM and hear clearly between the dits like I am
doing right now with my TS950SDX as I try to work BS7H.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Darwin, Keith
Sent: Friday, May 04, 2007 9:41 AM
To: elecraft
for, what to recommend for
hardware to use on my K2 and forthcoming K3 so that it would be easy to
switch from CW, SSB and any of the popular digital modes?
Tnx for your advice.
N2TK, Tony
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
any
advantages by upgrading to something like the Navigator or RigExpert for
either the K2 or K3 as an interface?
73,
N2TK, Tony
-Original Message-
From: Don Wilhelm [mailto:[EMAIL PROTECTED]
Sent: Sunday, May 06, 2007 7:02 PM
To: N2TK, Tony
Cc: Elecraft
Subject: Re: [Elecraft] Digital
Tnx Fred for the feedback. Good info.
N2TK, Tony
-Original Message-
From: Fred N. van Kempen [mailto:[EMAIL PROTECTED]
Sent: Sunday, May 06, 2007 7:25 PM
To: N2TK, Tony; [EMAIL PROTECTED]
Cc: Elecraft
Subject: RE: [Elecraft] Digital advice sought for K2 and K3
Tony,
I'm using
out for
the K2. So my K2 will continue to be a backup rig when home and my primary
rig to take with me on trips. When trekking through airports every pound
matters when you have a rig in one hand and a laptop over the other
shoulder.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED
mike requires voltage on the mike, can you use one of the other
Heil adapters?
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Don Wilhelm
Sent: Monday, May 14, 2007 1:41 AM
To: Bernard Gaffney, N8PVZ/QRP
Cc: [EMAIL PROTECTED]; elecraft
How does Yaesu do it with the FT9000? You can listen on the second receiver
while simultaneously operating transceive on the other receiver/transmitter
on another band while transmitting?
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Scott
on 5395.0 and transmit on 5371.5.
73,
N2TK, Tony
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
I have been using an Astron SS-30M with no noise difference on or off on
10-160M for my K2 and other 12V stuff. It sits about 4' away from the
equipment on a shelf under my operating position.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Hi Ken,
When I am running I agree with you. But when I am chasing someone I find QSK
to be very helpful. Sometimes you can work someone and exchange reports
while someone without QSK is still calling and not realizing what just
happened.
73,
N2TK, Tony
-Original Message-
From: [EMAIL
Just installed the K2 VCO Shielding Upgrade. The instructions say to
disconnect he frequency probe and completely remove it from the K2. I used
to leave it in TP2. Does it really make a difference with anything by
leaving it in TP2?
Tnx
N2TK, Tony
#3481
the amp.
N2TK, Tony
#3481
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of David Honey
Sent: Thursday, May 11, 2006 11:11 AM
To: Vic K2VCO
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Acom Amps
At 15:56 11/05/2006, Vic K2VCO wrote:
David Honey wrote:
I
.
Hopefully I didn't mess up too much in my description. Bottom line - it was
impressive and I want one.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
Sent: Monday, May 22, 2006 9:52 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft
,
N2TK, Tony
#3481
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Larry Phipps
Sent: Wednesday, May 24, 2006 9:38 AM
To: Tom Althoff
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] New Elecraft Products
Just my $0.02, but I think there is a problem looming
Gee, maybe we are up to the K5 with this feature?
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mike Scott
Sent: Wednesday, May 24, 2006 12:54 PM
To: Elecraft@mailman.qth.net
Subject: RE: [Elecraft] New Elecraft Products
Now that the K3 has
a call
when the cw doesn't sound like normal cw. So you tend to tune out that
signal and pick up another call. Some calls sent with a straight key or bug
are tough to copy.
73,
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of David A. Belsley
Sent
to hear between elements.
N2TK, Tony
#3481
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Rajiv Dewan, N2RD
Sent: Wednesday, July 19, 2006 8:50 PM
To: elecraft
Subject: [Elecraft] QSK
Did an A/B comparison of QSK between the K2 and my Yaesu 1KMP that I
have
. It sounds quiet. Just can't hear between the elements. But that is
okay since I use the K2 for Dxpeditions.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Rajiv Dewan, N2RD
Sent: Monday, July 24, 2006 2:00 PM
To: elecraft
Subject: [Elecraft] QSK
are hot and heavy.
73,
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of PE1E
Sent: Sunday, August 13, 2006 3:56 PM
To: Elecraft Reflector
Subject: [Elecraft] What makes K2's SSB performance less impressive than on
CW ?
I bought a K2 for SSB use
on it
could be treated as one or two baluns back to back. But just checking power
at the end versus power going in would seem to check the efficiency of the
coax but not tell you how much, if any RF was on the outside of the shield.
Please correct me if I am all wet.
73,
N2TK, Tony
-Original
filter
though. Maybe set up this added filter for CW (400-600HZ) ?
I still haul the K2 down to WP2Z.
73,
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Don Wilhelm
Sent: Wednesday, November 08, 2006 10:15 AM
To: Joe-aa4nn; elecraft
shuts down this Wednesday? Still trying to get them on
160M.
I need too add an indicator to my K2 when running split. A couple of times I
thought I was split when I wasn't. Had egg on my face when I called on top
of the DX station. That's embarrassing.
Good luck working K7C
73,
N2TK, Tony
Wouldn't it be nice if an auto-tuner was built into the amp? I am anxious to
see the high power version of the amp that I saw at Dayton this past year.
73,
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gilbert J Cross
Sent: Friday
Does it cover 6M?
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ron D'Eau Claire
Sent: Saturday, February 04, 2006 1:05 PM
To: elecraft@mailman.qth.net
Subject:RE: [Elecraft] Re: New Amplifiers ...
In previous comments here
to
push when I get out of the snowy northeast next week and operate the 87A
from WP2Z.
By the way I plan on taking down my K2. Was given a real nice metal case
with foam liner. It should work great for carrying on the K2.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
. It even has clips for a shoulder strap.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Tuesday, February 14, 2006 5:52 PM
To: Elecraft@mailman.qth.net
Subject:[Elecraft] elecraft case
Tony, N2TK mentioned
like the 2000a.
73,
N2TK, Tony
-Original Message-
From: Vic K2VCO [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 14, 2006 5:32 PM
To: N2TK, Tony
Cc: 'Augie (Gus) Hansen'; 'Jeff Stai'; 'Elecraft Reflector'
Subject:Re: [Elecraft] What's with the new amplifier?
N2TK
without QSK. But
when hunting and pouncing it is nice to have QSK that hears between the dits
at 20WPM.
#3481
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bob Jones
Sent: Sunday, February 19, 2006 6:04 AM
To: elecraft@mailman.qth.net
Subject
the same in the K2. However the DSP
is better in the K2. And it is sure a lot easier totting the K2 rather then
the 950 down south.
If you hear me on as either WP2Z or N2TK/NP2 from 2/22-3/8, give me a call.
Now if I only had that new Elecraft solid-state amp to take along?
73,
N2TK, Tony
without
any artifacts such as clicks, and pops and no agc pumping.
73,
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ron D'Eau Claire
Sent: Sunday, February 19, 2006 1:51 PM
To: 'Elecraft Reflector'
Subject: RE: [Elecraft] K2 QSK
I'm wondering
all in the pileups from WP2Z.
73,
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ron D'Eau Claire
Sent: Sunday, February 19, 2006 3:52 PM
To: 'Elecraft Reflector'
Subject: RE: [Elecraft] K2 QSK
Tony, N2TK wrote:
Hi Ron,
... this is an individual
Hi Harvey,
Would appreciate if you get feedback to post what you hear. I think my
denoisier is too aggressive in position one. Looking for recommendations for
the settings.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Harvey Howell
Sent: Monday
Hi Dean,
I had made some resistor changes to increase the compression. It works well
now. I do not have my Elecraft notes handy but I got the info to change from
the following web site. I couldn't find the English version of this.
N2TK, Tony
http://www.mydarc.de/df7khk/dwn/ksb2_mod.pdf
to make more Q's. Can't wait
till I am back there in October. Will take the K2 back with me.
73,
N2TK, Tony
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
on
the KSB2 to increase compression. SSbA is now at 2 and SSbC is at 3.
73,
N2TK, Tony
#3481
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
Sent: Tuesday, March 21, 2006 1:09 PM
To: Ken Alexander; Elecraft
Subject: Re: [Elecraft] Heil Proset
.
I brought in my W-4 wattmeter to check the accuracy. It was surprising how
accurate it was on 20M.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Dave Sublette
Sent: Saturday, April 08, 2006 3:33 PM
To: [EMAIL PROTECTED]
Cc: Elecraft
are calling at once I am just
trying to get a few letters out of the mess if the signals aren't strong.
Think how much more confusion is added when you are sending AA4LR DE
AA4AK/QRP AR instead of AA4AK.
Steve, it seems you have discovered the best way to get the quickest
response.
73,
N2TK
recordings based on as an example
different operators.
73,
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
So I am not going nuts. Same problem here.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John, KD8K
Sent: Monday, May 31, 2010 4:38 PM
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Firmware V3.99
I
change bands the same thing happens.
My other K3 does not do this and operates properly.
I can't find it so far in the manual. What do I do to correct?
Tnx
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net
I was envious this morning listening to the mid-west running EU and not a
peep here in NY. My buddy in eastern PA said it was quiet for him too except
for SA.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
. Sometimes the band conditions don't
allow rag-chewing. At the moment I am trying to work FP on 6M. With the QSB
I am getting only snippets of his call. I would be happy just to get a
signal report exchange.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
Hi Dave,
My wish list is the same too. If Elecraft offered the KRX3 hardware mode to
bring out the IF maybe they could do an exchange program like they have with
the DSP upgrade or at least a kit?
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft
such as
lightning protection, coax switches, etc.
73,
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
of my XG1's. Stick a wire
in it and it becomes a nice signal source for checking low band receive
antennas.
73,
N2TK, Tony
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Wednesday, August 18, 2010 6:44 PM
To: N2TK, Tony
Cc: elecraft@mailman.qth.net
Subject: Re
.
But still no audio. Power down and up and audio seems fine with S9 with XG-2
now connected.
Tried reloading the firmware and even going back to 4.03. Same result.
Anyone have this happen? Any ideas? RF Calibration always worked before. Is
this a cockpit error on my end?
Tnx
N2TK, Tony
I believe the prototype front panel was configured and labeled like Paul's
modified rig.
I like that configuration too.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W2RU - Bud Hippisley
Sent: Wednesday
Same here.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe Subich, W4TV
Sent: Wednesday, October 13, 2010 6:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 SUB AF - NOR or BALANCE?
I'd even
close scrutiny.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of van fair
Sent: Wednesday, November 10, 2010 7:27 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] The K3 at airports
Does anyone have
interrupt the playback of a recorded message unless you hit ESC.
Using the KDVR is a simpler hookup with programming the F1-F4 keys in N1MM
rather than using the pc's audio card and less chance of feedback, hum and
other potential issues.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun
it to toggle the
APF.
Tnx for the great implementation of the APF. Now if only there was a spare
switch? Maybe when Santa brings me a P3 I could toggle the APF from there?
73,
N2TK, Tony
K3 #311
K3 #1435
__
Elecraft mailing list
That is specifically why I would not want the VOX to interrupt the KDVR.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Brown
Sent: Tuesday, November 16, 2010 12:28 PM
To: elecraft@mailman.qth.net
Subject: Re
How about being able to set it up like N1MM cancels the voice announcement -
use the ESC key? Or if you hit the same F key again before the KDVR is done
it stops sending?
N2TK, Tony
-Original Message-
From: Doug Turnbull [mailto:turnb...@net1.ie]
Sent: Tuesday, November 16, 2010 12:55
.
Also I think I should install 4.14 in my second K3 to compare the two
versions to see if I hear the difference you are hearing
73,
N2TK, Tony
K3 #311
K3 #1435
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of juergen
Sent
Hi Steve,
Using the cable that came with my K3 I measure on the K3's meter display
13.6V key up and 12.4 - 12.6V key down at 100W out on 10-20M. Roughly 1.2A
in receive and 20A in transmit mode.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
far I can't hear a
difference when using the APF on very weak signals on topband.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
Sent: Sunday, November 21, 2010 12:45 AM
To: Dave Perry N4QS
Cc
in the
Transmit mode and Test mode.
I should have waited another day to upgrade from 4.17 to 4.22 in the other
K3 to see if the earlier version did it too. May have to install earlier
version again to see if it is still there.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
Just tried 4.17 - same problem. Loaded 4.14 and the Autonotch problem went
away.
N2TK, Tony
-Original Message-
From: N2TK, Tony [mailto:tony@verizon.net]
Sent: Tuesday, November 23, 2010 8:45 AM
To: 'Bill [NS4C]'; 'elecraft@mailman.qth.net'
Subject: RE: [Elecraft] K3: Latest Beta FW
on CW.
And did I say how happy I am with the APF?
73,
N2TK, Tony
#311
#1435
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James Sarte (K2QI)
Sent: Saturday, November 27, 2010 7:16 AM
To: Elecraft
Subject: [Elecraft] K3: noise
.
73,
N2TK,Tony
#311
#1435
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nate Bargmann
Sent: Wednesday, December 01, 2010 6:07 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Interesting Conversation about FT-5000 vs
to be an
advantage turning on the APF. It seems only when I know there is a signal
there that I can't (telnet callout) or can hardly hear it that turning on
the APF works.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of k5nu
Span works here.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W4CCS
Sent: Thursday, January 13, 2011 5:26 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 P3 Beta Firmware Release: Fixed-Tune
between making or not making a contact. When the DX is at the
noise level much less than 6db gain could make all the difference.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Ragle
Sent: Tuesday, January 25
Weird, but I have the same problem with the B encoder on one of my K3's. If
I pull slightly on VFOB nothing changes. If I push on it slightly it works
fine. I guess the first thing I should try is to resolder the connections on
the encoder.
Any other ideas?
N2TK, Tony
-Original Message
real
good ears.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ab2tc
Sent: Monday, January 31, 2011 6:31 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 at VP8ORK
Hi,
I did notice
with
the sub-receiver while I am decoding the RTTY on the main receiver. I am
using two MMTTY programs at the same time.
What would be nice if there were two independent inputs and outputs on a
sound card.
Tnx for any feedback
73,
N2TK, Tony
-Original Message-
From: elecraft-boun
1 - 100 of 319 matches
Mail list logo
