-users] servo with brake issue
Jorge,
I have not had same experience and I use AD SureServo 3kW motor with
brake. Just to let you know its not a constant problem. There are config
bits to set in the SureServo drive. And the SureServo people at AD were
smart helpful. Also appreciate your work
On Fri, 2008-05-30 at 09:16 -0700, Jorge Barrera wrote:
... snip
... we discovered a faulty pin connection on the motor connector.
This wasn't all, the ground in the building was not that good either
and a UPS was used to power the PC and the IO boards, this took care
of the false limit
Kirk Wallace wrote:
Thank you for posting your results. I kind of take the mains for granted.
Oh,no! That can be a FATAL mistake! I have been BLITZED a
number of times by defective grounds, and systems where multiple
pieces of equipment were plugged into different outlets.
I had a
Has anybody ever encounter a problem in which a machine goes crazy when you
replace one of your servos with a servo with brake?
In my case I am using sure-servo motors and drives and when I plug in the 24V
to release the brake the other two motors start hunting around. I've even tried
powering
On Sat, 2008-05-24 at 08:27 -0700, Jorge Barrera wrote:
Has anybody ever encounter a problem in which a machine goes crazy
when you replace one of your servos with a servo with brake?
In my case I am using sure-servo motors and drives and when I plug in
the 24V to release the brake the other
On Sat, 2008-05-24 at 11:19 -0500, Ray Henry wrote:
On Sat, 2008-05-24 at 08:27 -0700, Jorge Barrera wrote:
Has anybody ever encounter a problem in which a machine goes crazy
when you replace one of your servos with a servo with brake?
In my case I am using sure-servo motors and drives and
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jorge Barrera
Sent: Saturday, May 24, 2008 8:27 AM
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] servo with brake issue
Has anybody ever encounter a problem in which a machine goes crazy when you
replace one of your servos with a servo
Jorge,
I have not had same experience and I use AD SureServo 3kW motor with
brake. Just to let you know its not a constant problem. There are config
bits to set in the SureServo drive. And the SureServo people at AD were
smart helpful. Also appreciate your work on Open Source Hardware.
TomP