Jack,
Can you provide a link to the monitor you are referring to. I looked at the
Sharp web site (http://www.sharpusa.com) and was not able to find an 8.4
monitor other than those using standard VGA, etc. inputs, for which no
additional drivers are necessary.
Alternately, I recently checked into
The interface is dependent upon lcdproc, which provides
drivers for these and many other LCD displays.
Oops, I forgot the link, http://www.lcdproc.org/
Regards,
Eric
-
Take Surveys. Earn Cash. Influence the Future of
Hi,
I am running successfully emc2.1.3 on a new x,y,z machine but trying to
use image-to-gcode have problem.
Attempting to open any image file ,even torus.png, returns error dialog
(Exit code 1) and in terminal
the following:
File usr/bin/image-to-gcode,line 714,in ?
main()
File
I am trying to determine pinouts on my Litton encoders. They have 5
wires, two for 5V supply, two giving 1000 counts per rev, one giving 1
count per rev. Can I assume then that the 1000 counts per rev are
Channels A and B and the other is the index? Is there a rudimentary
method to
On Wed, Mar 21, 2007 at 08:55:38PM +, Richard Arthur wrote:
I am trying to determine pinouts on my Litton encoders. They have 5
wires, two for 5V supply, two giving 1000 counts per rev, one giving 1
count per rev. Can I assume then that the 1000 counts per rev are
Channels A and B and
Marc Bodmer wrote:
Dear EMC2 users
I had to set a pretty high Following Error for high speeds. I've
set 5mm for FERROR. (max speed is 18000 mm/min).
18000mm/min = 300 mm/sec
5mm error = 0.0167 seconds of movement
Since the PID loops runs every 0.001 seconds, you will never get
below
Eric- The screen I saw was on ebay:
http://cgi.ebay.com/NEW-SHARP-8-4-LCD-SCREEN-PANEL-APPLE-DELL-LAPTOP-CAR_W0QQitemZ300092346949QQcategoryZ51161QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
If the link doesn't go thru try a search for item 300092346949
Jack Ensor
Eric H. Johnson wrote:
Jack,
Can
Richard Arthur wrote:
[snip]
With 1000 count encoders and ball screw pitch 0.2 inch giving a
resolution of 0.0002 inch, I note the old original control display
actually indicated a resolution of 0.0001 inch. Presumably, it really is
limited to 0.0002 inch?
If you get 1000 cycles on each of
Why dont you use a 7 or 8" touch screen Car PC Display, there are may
on ebay.
Volker Gttler
Jack Ensor schrieb:
Eric- The screen I saw was on ebay:
Hi again,
i was trying to run with a python debugger but i will check it in CVS.
Thank you John.
Regards
George.
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
Richard Arthur wrote:
I am trying to determine pinouts on my Litton encoders. They have 5
wires, two for 5V supply, two giving 1000 counts per rev, one giving 1
count per rev. Can I assume then that the 1000 counts per rev are
Channels A and B and the other is the index?
Yes.
Is there a
11 matches
Mail list logo