Ahh, thank you! That was it. I plugged it in and rebooted - there it was
- 363.965MHz. Thanks everyone for the suggestions!
Bye the way, I was half asleep when I wrote the original post so forgive
me for the subject line having little to do with the message; my brain was
shorting out! :-)
Is there a utility that would list processes which keep a drive locked,
i.e which prevent unmounting ?
--
Milos Prudek
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft?
Go to
After using Mandrake 9.0 with kdm for a month without any problems, kdm
suddenly does not allow any window manager and always runs failsafe window.
It could have happened after unclean shutdown, but I'm using reiserfs
journaling.
I was able to run kdm configuration from KDE control center and
Ever since I installed Mandrake 9.0, JBuilder has been crashing on me
like mad. Every 10 minutes it just quits with no warning. Has anyone
else experienced this - should I be looking at problems with JBuilder,
or with my JDK or runtime? Under 8.1 I never had this kind problem.
thanks for any
Hi Miark
I got a Athlon 1.3GHz, 512MBytes of Ram and a NVidia Geforce3 Ti500 -
and details set to low - I can even go onto huge servers and have not too
big problems with speed (24Players). So - It's fast enough for me ;)
If you want - I could send you my X-Config file for you to compare. I
Replying to myself, but I did remember some problems with earlier
versions of JBuilder (I have 7) related to sound, and I noticed that
none of my JBuilder sounds are working anymore. Thought someone might
recognize the symptoms and provide a workaround for me, other than just
disabling sound in
Hi all,
Having a really bad time with this one.
Any help would be appreciated.
Last year I set up a Linux Mandrake 8.0 box
for a school and installed squid so all their
students machines went through it to the internet.
This has worked fine for over a year, never crashed
or any other problems.
And on the subject of fast machines - I have a dual athlon 1900+ system -
does UT2003 have the ability to use smp? I'm really annoyed that q3a only
enables smp for windows machines - they note some 'bug' that made them
decide to disable it in the linux version - I wish they would have just
Miark, you say it slows down in heated game play - is that single player
or network? Could it be network related? Just a thought.
Mike
Yesterday, Miark mused:
:-) Yes, I got the splash screen. I know when the nVidia drivers
aren't working becuase TuxRacer is simply unplayable. But it's
I *think* mplayer handles that correctly. I seem to remember being able
to watch something not too long ago with that stream type using mplayer.
Mike
Yesterday, villoing mused:
Does anyone know where to find and how to install a soft which would
allow me to see wideo streaming on
Hi, all,
I have just recently installed 9.0 and - obviously - my Netgear MA401 wireless
card didn't work - so - first thing first, I started searching the 'net.
Mandrake expert archive seemed like a good starting point, and - though I
found helpful hints and I have it now (somehow) working, I
Hey all,
ok, I'm starting to get more and more into using the console since
I've been discovering how much faster it moves on my 366Mhz laptop :-)
I've learned how to suspend jobs and put them in fg / bg; is it possible
to start a console-based mp3 player and then, say, open vi and write
From what I have seen and experienced so far, the most IMPORTANT thing
Linux needs now is good DOCUMENTATION. Windows, Mac, all of them have
excellent user documentation thus making the user feel at home and not
lost.
You must be joking.
Microsoft provides incredibly poor user documentation.
That is so odd. I have never had to take even a second glance at my MA401
card - yet it seems over the past couple of weeks that quite a number of
people are complaining about it. Could it possibly be that the hardware
is not functioning correctly (bad card)?
Mike
2:59pm, stefmit mused:
I just rebuild from pflogsumm-1.0.4-t2.src.rpm, works fine.
http://tis.foobar.fi/software/?postfix
On Fri, 2002-11-22 at 21:28, Franki wrote:
Hi guys,
Has anyone seen a pflogsumm rpm for mdk9 around??
my 7.2 box has it running, and it was in the RPM I loaded..
very handy stats I
lsof
On Sat, 2002-11-23 at 00:39, Milos Prudek wrote:
Is there a utility that would list processes which keep a drive locked,
i.e which prevent unmounting ?
--
Milos Prudek
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
or could people be running MandrakeUpdate and getting the broken
initscripts package? If you have initscripts-6.91-13.1mdk you will need
to search the list archives for the section of
/etc/sysconfig/network-scripts/functions to comment out, it's a link
checking function. initscripts-6.91-16.1mdk
I know about lsof, but I failed to find parameters that would list these
processes.
Below is a result of /usr/sbin/lsof|grep dev (I have /dev/scd0 mounted
on /mnt/burner). There is no line about /dev/scd0 there.
lsof
On Sat, 2002-11-23 at 00:39, Milos Prudek wrote:
Is there a utility that
I've installed apache 2 successfully, then test the page, and the english version of
apache page is displayed. I just want to know how to change the conf file if I want to
display the japanese or other languages of apache page.
Should I use modules.? I've read a lot about modules but I can't
huh, that's funny. I just tried the same thing on mine and it doesn't
work here either -- in fact, I opened a file on the disk and lsof
doesn't report its existence at all.
On Sat, 2002-11-23 at 08:12, Milos Prudek wrote:
I know about lsof, but I failed to find parameters that would list these
I have a question about Partimage. I recently downloaded it (version
0.6.1-1).
When i run it, I get the gui that shows up on the console. However, for
the life of me, I haven't been able to figure out how to change certain
selections. For example, on the very first window, if I wanted to
Restore
I already did fix that (i.e. commenting out the grep part), as I
mentioned in my original message, when talking about the
network-functions).
Hardware is OK ... tested fine with Win :(
Thx for suggestions.
Stef
Jack Coates wrote:
or could people be running MandrakeUpdate and getting the
Just do
partimage --help
and you can select every command with options from the command line.
Regards,
Lieven
Op za 23-11-2002, om 17:55 schreef Rick Friedman:
I have a question about Partimage. I recently downloaded it (version
0.6.1-1).
When i run it, I get the gui that shows up on the
thanks heaps.. works like a charm...
rgds
Franki
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jack Coates
Sent: Saturday, 23 November 2002 11:40 PM
To: [EMAIL PROTECTED]
Subject: Re: [expert] pflogsumm for mdk9.0
I just rebuild from
Just do
partimage --help
and you can select every command with options from the command line.
Regards,
Lieven
Op za 23-11-2002, om 17:55 schreef Rick Friedman:
I have a question about Partimage. I recently downloaded it (version
0.6.1-1).
When i run it, I get the gui that shows up on the
for now, I've installer crossover and them few plugins, but these
plugins appears in Mozilla but with this message :
Unable to load the windows plugin library.
Could somebody help me ?
Michael Holt wrote:
I *think* mplayer handles that correctly. I seem to remember being able
to watch
On Friday 22 November 2002 07:30 am, Manuel Soto wrote:
This wizard does not for me too, try w/ this:
Install iptables
set up this with the following settings:
==
cat /etc/sysconfig/iptables
# Generated by iptables-save v1.2.2 on Sat May 4
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Michael Holt wrote:
Hey all,
Thing is, when I hit '^z' to leave the mp3
player, the sound stops too. I would like to leave the sound on and then
do something else in the foreground.
After you do the CTRL-z, type bg and the 'job' will
Regardless of what the RPM info says, if you want to find out where the
files in an RPM are, use 'rpm -ql package.rpm' and it will give you a
list of the files with their complete path. I'm pretty sure that it
even reflects the correct path if you use the '--relocate' parameter,
but I haven't
On Fri, 2002-11-22 at 16:55, Bob Sherron wrote:
I need to figure out a way to launch two programs sharing a split screen
immediately after login. I figured I'd edit my .bashrc to start screen,
but after that I'm stuck. Screen requires several key combonations to
split correctly, and I can't
Milos Prudek wrote:
I know about lsof, but I failed to find parameters that would list
these processes.
Below is a result of /usr/sbin/lsof|grep dev (I have /dev/scd0 mounted
on /mnt/burner). There is no line about /dev/scd0 there.
If you have a file open on the cdrom then try:
Below is a result of /usr/sbin/lsof|grep dev (I have /dev/scd0 mounted
on /mnt/burner). There is no line about /dev/scd0 there.
If you have a file open on the cdrom then try:
/usr/sbin/lsof -V /mnt/cdrom2
Absolutely correct.
The -V option is not neccesary. I was searching for /dev/scd0,
I guess I just needed to clarify the use of md5sum. When executing md5sum -c
Mandrake81-cd3-supp.i586.iso, why do I get md5sum: Mandrake81-cd3-supp.i586.iso: no
properly formatted MD5 checksum lines found? When I execute md5sum
Mandrake81-cd3-supp.i586.iso I get an md5sum displayed which
[EMAIL PROTECTED] wrote:
Isn't the md5sum embedded in the iso so that the -c switch will work?
No. You need to run md5sum -c MD5SUM.txt
in other words, run it against the md5sum text file for the iso's in the
same directory on your download mirror (in your local directory where
you have the
Hi Everyone,
On the setup of Evolution it gives you a chance to set up the default
web browser, but after Evolution is running, is there any where that one
can change it's default Web browser?
Cheers
Mark
Want to buy your Pack or Services from MandrakeSoft?
Go to
This time [EMAIL PROTECTED]
becomes daring and writes:
I guess I just needed to clarify the use of md5sum. When executing
md5sum -c Mandrake81-cd3-supp.i586.iso, why do I get md5sum:
Mandrake81-cd3-supp.i586.iso: no properly formatted MD5 checksum lines
found? When I execute md5sum
Well, not that bad, but is sounded catchy.
Using Mandrake 8.2 (even though I sprung for the 9.0 disks and my credit card was
charged in September and I STILL don't have the disks :-( ), I set
MANPATH=/opt/perl/lib/perl5/man:/usr/lib/perl5/man
Apparently, unlike Solaris and any other *NIX
On Sat, 23 Nov 2002 19:21:31 -0500, Matthew O. Persico [EMAIL PROTECTED]said:
Well, not that bad, but is sounded catchy.
Using Mandrake 8.2 (even though I sprung for the 9.0 disks and my credit card was
charged in September and I STILL don't have the disks :-( ), I set
This time Matthew O. Persico [EMAIL PROTECTED]
becomes daring and writes:
Well, not that bad, but is sounded catchy.
Using Mandrake 8.2 (even though I sprung for the 9.0 disks and my
credit card was charged in September and I STILL don't have the disks
:-( ), I set
I am having problems with a internet connection share. Oddly, I had it
working for a while last evening but then, suddenly, it died and I was unable
to communication computer to computer via wlan (sharing a modem connection on
one of them).
Running Mandrake 8.2, I have a usb wlan device on my
On Sat, 23 Nov 2002 18:35:19 -0600, Vox [EMAIL PROTECTED]said:
This time Matthew O. Persico [EMAIL PROTECTED]
becomes daring and writes:
Well, not that bad, but is sounded catchy.
Using Mandrake 8.2 (even though I sprung for the 9.0 disks and my
credit card was charged in September and I
did a little more poking around and it works as expected with a CD, but
not with a DVD.
On Sat, 2002-11-23 at 08:50, Jack Coates wrote:
huh, that's funny. I just tried the same thing on mine and it doesn't
work here either -- in fact, I opened a file on the disk and lsof
doesn't report its
I have a Pentium4 box that used to hold XP. When XP shut down, it turned the box off.
I moved XP to another box and installed Mandrake. When I execute
poweroff
as root, the os is stopped and the last thing the console says is
Power down
but the power does not go off. Since it
What about:
shutdown -h now
?
Paul
On Sunday 24 November 2002 01:27 am, Matthew O. Persico wrote:
I have a Pentium4 box that used to hold XP. When XP shut down, it turned
the box off. I moved XP to another box and installed Mandrake. When I
execute
poweroff
as root, the os is stopped
On Sun, 24 Nov 2002 01:42:54 +, Paul Kaplan [EMAIL PROTECTED]said:
What about:
shutdown -h now
?
Paul
Nope. It still stops at
Power down
and does not shutoff. That's why I thought /sbin/poweroff was the answer. It ain't.
On Sunday 24 November 2002 01:27 am, Matthew O. Persico wrote:
I
Well if shutdown -h now isn't shutting it down then you most likely
don't have a problem with your linux install. At this point I would
suggest checking your BIOS for power off options, as well as seeing what
the current power save options are at. Check your ACPI options in your
BIOS as well. You
Hi List,
Anyone have a quick suggestion on how to change the themes in Squirrel
mail using the configuration file conf.pl?
thanks,
Mark
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On 23 Nov 2002 21:09:25 -0500, Nelson Bartley [EMAIL PROTECTED]said:
Well if shutdown -h now isn't shutting it down then you most likely
don't have a problem with your linux install. At this point I would
suggest checking your BIOS for power off options, as well as seeing what
the current power
Hi List,
Anyone have a quick suggestion on how to change the themes in
Squirrel mail using the configuration file conf.pl?
thanks,
Mark
O God! I feel like an idiot! never mind. I found it.
--
Mark
Stupidity has no moral high ground. It can't see that high!
Want to buy your Pack or
021121 Praedor Tempus wrote:
I have fetchmail 6.1.0 and fetchmailconf.
I ran fetchmailconf to configure fetchmail during an initial test
but now the test is over and I want to change its polling behavior.
I try to run fetchmailconf now and it errors out with this:
Can't read configuration
On Sun, 2002-11-24 at 13:24, Matthew O. Persico wrote:
On 23 Nov 2002 21:09:25 -0500, Nelson Bartley [EMAIL PROTECTED]said:
Well if shutdown -h now isn't shutting it down then you most likely
don't have a problem with your linux install. At this point I would
suggest checking your BIOS for
No, it's single player.
Miark
On Sat, 23 Nov 2002 06:32:30 -0800 (PST)
Michael Holt [EMAIL PROTECTED] wrote:
Miark, you say it slows down in heated game play - is that single player
or network? Could it be network related? Just a thought.
Mike
Yesterday, Miark mused:
:-) Yes, I
Yes, that would be cool. Thanks.
Miark
On Sat, 23 Nov 2002 10:31:26 +0100 (CET)
Joerg Mertin [EMAIL PROTECTED] wrote:
Hi Miark
I got a Athlon 1.3GHz, 512MBytes of Ram and a NVidia Geforce3 Ti500 -
and details set to low - I can even go onto huge servers and have not too
big problems
On Fri, 2002-11-22 at 07:30, Todd Lyons wrote:
Ron Stodden wrote on Wed, Nov 20, 2002 at 03:39:53PM +1100 :
Since you are going from 8.1 to 9.0, this is a major step (8--9) and
compatibility may not be assumed.
This is true. The upgrade process is really intended to go from the
On Saturday 23 November 2002 10:41 pm, you wrote:
On Sun, 2002-11-24 at 13:24, Matthew O. Persico wrote:
On 23 Nov 2002 21:09:25 -0500, Nelson Bartley [EMAIL PROTECTED]said:
Well if shutdown -h now isn't shutting it down then you most likely
don't have a problem with your linux install. At
On the sharing machine, run iptables-save and post the output here.
Woody
Praedor Atrebates said:
I am having problems with a internet connection share. Oddly, I had it
working for a while last evening but then, suddenly, it died and I was
unable to communication computer to computer
It should use the Gnome defaults as listed in the Gnome Control Center.
Woody
Mark Williamson said:
Hi Everyone,
On the setup of Evolution it gives you a chance to set up the default
web browser, but after Evolution is running, is there any where that one
can change it's default Web
On Saturday 23 November 2002 07:24 pm, Matthew O. Persico wrote:
On 23 Nov 2002 21:09:25 -0500, Nelson Bartley [EMAIL PROTECTED]said:
Well if shutdown -h now isn't shutting it down then you most likely
don't have a problem with your linux install. At this point I would
suggest checking your
On Sun, 24 Nov 2002 02:09, Michael Holt wrote:
Hey all,
ok, I'm starting to get more and more into using the console since
I've been discovering how much faster it moves on my 366Mhz laptop :-)
I've learned how to suspend jobs and put them in fg / bg; is it possible
to start a
59 matches
Mail list logo