[Flexradio] John W5GI, Bob Tracy k5kDN, Tim Ellison at Huntsville!

What a treat the Alabama contingent of Flexers enjoyed at the ARRL National Convention in Huntsville, AL. The crowds were very large on Saturday and I suspect today will not be an exception. The interest in Flex-Radio was outstanding with many people stopping in and testing the waters. For

[Flexradio] digimode problem

I am having a problem with digimodes and would appreciate comments. I am running a SDR-1K with DEM 144MHz transvwerter, which drives a 70MHz transverter. I am using WSJT v 5.9.7 and VAC4.07. When transmitting in any of the digimodes (i.e. FSK/JT6M/JT65) there are frequent, but brief (several

Re: [Flexradio] digimode problem

David, I assume you are using a registered (purchased) copy of VAC. The unregistered demo version will cause this behavior. 73, Ray, K9DUR ___ FlexRadio mailing list FlexRadio@flex-radio.biz

Re: [Flexradio] Samlex 1223 for Flex5000a?

Reuben, Another alternative to the Samlex 1223 is the Alinco DM-300MV. It is a switching supply therefore MUCH smaller lighter than the Astron. Of course, it costs more, too ($130-$160 USD in the US). Output voltage is adjustable 5-15 VDC, with a preset at 13.8 VDC. Current rating is 32 Amp

Re: [Flexradio] John W5GI, Bob Tracy k5kDN, Tim Ellison at Huntsville!

Yes I did make the purchase there, And NO they had NONE FOR IMMEDIATE DELIVERY, I am now on the list just as is everyone else. I believe had they had any for immediate delivery, they would have sold out. Needless to say, I am looking forward to October. Hi Hi. Truthfully, I remained unsure

[Flexradio] PowerSDR v1.10.1

I just downloaded PowerSDR 1.10.1 and got it all configured. Nice job guys! And I appreciate the humor you put into this version! Gave me a good chuckle. George N7BUI ___ FlexRadio mailing list FlexRadio@flex-radio.biz

Re: [Flexradio] John W5GI, Bob Tracy k5kDN, Tim Ellison at Huntsville!

Echo confirmed! Jim - W4YXU - Original Message - From: Jim, W4ATK [EMAIL PROTECTED] To: Flex-Radio Reflector flexradio@flex-radio.biz Sent: Sunday, August 19, 2007 12:13 PM Subject: Re: [Flexradio] John W5GI, Bob Tracy k5kDN,Tim Ellison at Huntsville! Yes I did make the purchase

[Flexradio] 5K operations manual

was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070819/8500cd23/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

[Flexradio] PowerSDR v1.10.1 bug report

I couldn't figure out how to enter a bug report at http://support.flex-radio.com/BugList.aspx?it=b so I list them here: Installing V1.10.1.zip from http://support.flex-radio.com/Downloads.aspx?id=164 , I see the console display incorrectly calls itself V1.9.1 Beta SVN 1442 (not V1.10.1) in

Re: [Flexradio] PowerSDR v1.10.1 bug report

Jerry, You have to be logged into the support site ' http://suport.flex-radio.com ' in order to enter a bug report. If you don't have an account, you can create one at: http://support.flex-radio.com/urs.aspx After you've logged in, use the menu system to select: Bug Tracker Add a New Bug

Re: [Flexradio] PowerSDR v1.10.1 bug report

I figured out how to enter these in to the bug database and have done so. Jerry At 04:21 PM 8/19/2007, you wrote: I couldn't figure out how to enter a bug report at http://support.flex-radio.com/BugList.aspx?it=b so I list them here: Installing V1.10.1.zip from

[Flexradio] PowerSDR v.10.1 small issue

One little mislabel in the software. The RF label has now become AGC but it definitely still controls the rf gain. George N7BUI ___ FlexRadio mailing list FlexRadio@flex-radio.biz

[Flexradio] Message 15 Problems with VAC

Hi David Check if the Sampling Rate at the VAC setup is set to 48000, that might be the case because the default setting on a new install is at 11025 73 Chris HB9BDM ___ FlexRadio mailing list FlexRadio@flex-radio.biz

[Flexradio] O/J vs Delta-44 or Edirol?

Can anybody using Ozzy/Janus provide a comparison to the standard D44 or FA66 sound cards? Subjective/qualitative comparisons are fine... I'm just curious, de Peter K1PGV ___ FlexRadio mailing list FlexRadio@flex-radio.biz

Re: [Flexradio] PowerSDR v.10.1 small issue

Hello George, The control's name was deliberately changed. It actually functions as an AGC threshold control rather than an RF gain control, and the name was changed to more accurately represent it's action. Dale, WA8SRA George wrote: One little mislabel in the software. The RF label

[Flexradio] PowerSDR RIT control by mouse wheel

I have entered this on the Flex feature request list: This weekend I operated 16 hours in the SARTG RTTY contest with my SDR-1000 as my only radio. I REALLY missed an easy-to-use RIT control. Modern RTTY decoder software with Automatic Tuning helps, but RIT is still necessary. While I was in

Re: [Flexradio] PowerSDR RIT control by mouse wheel

Please do not sacrifice use of the scroll wheel to tune the rig though, that would be a major problem for me! If some key/scroll combination could tune the RIT it would be great (Ctrl-wheel?) Neal On 8/19/07, Jerry Flanders [EMAIL PROTECTED] wrote: I have entered this on the Flex feature

Re: [Flexradio] PowerSDR RIT control by mouse wheel

I would hope for an option to set it to this function IF the op desired, just like we can now set/change the keyboard shortcuts optionally. Jerry At 11:36 PM 8/19/2007, you wrote: Please do not sacrifice use of the scroll wheel to tune the rig though, that would be a major problem for me! If

Re: [Flexradio] PowerSDR RIT control by mouse wheel

How about this; make a new tab in the setup menu called Mouse. Within that tab could be selectable functions per wheel movement, and Left mouse clicks. The default could be what they do today (tune pull down menu). Mike W5CUL -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL