Eric F Crist wrote:
On Tuesday 17 February 2004 10:48 pm, Saint Aardvark the Carpeted wrote:
Eric F Crist disturbed my sleep to write:
When I go the the server via https:servername I get a dialog asking
for me to accept a certificate, but it's still the snakeoil cert! What
am I doing wrong?
I
Hi
I think there is some problem with the ISO image for disk1 of FBSD4.9, I
burnt two copies, and they both failed during installation.
Now I'm using FTP to install
fs
___
[EMAIL PROTECTED] mailing list
Jerry McAllister wrote:
Hello Support !
I bought FreeBSD 5.1 and Handbook for my 10 year old computer nut son
for Christmas and have had problems installing the full graphical version.
Good choice. Get him started right.
When asked for video card on installation, I don't' know what to
On Wed, 18 Feb 2004, Luke Kearney wrote:
On Wed, 18 Feb 2004 00:26:47 -0600
Eric F Crist [EMAIL PROTECTED] granted us these pearls of wisdom:
OK, I'm tired of trying to configure sendmail. I think I give up. I've hear
postfix and qmail recommendations the most. I need a mail server
Quoting Greg 'groggy' Lehey [EMAIL PROTECTED]:
I answered an almost identical question yesterday: it depends on the
volume structure, which you haven't stated. Look at
http://www.vinumvm.org/vinum/how-to-debug.html and supply in
particular the output of 'vinum list', unless the following
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
...did you check the md5sum ?
Chan Fook Sheng wrote:
| Hi
|
| I think there is some problem with the ISO image for disk1 of FBSD4.9, I
| burnt two copies, and they both failed during installation.
|
| Now I'm using FTP to install
|
| fs
|
|
hi
yes, i check it wheni burn the 2nd one... to avoid wasting another CD ;)
Quintin Riis wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
...did you check the md5sum ?
Chan Fook Sheng wrote:
| Hi
|
| I think there is some problem with the ISO image for disk1 of
FBSD4.9, I
| burnt two
Bonjour,
je vien d'apprendre que linux à un OS 64bit -- freeBSD 64.
Je n'ai jamais utilisé linux aupartavant et j'aimerai bien savoir
comment pourrais je le télécharger et l'installé sur mon AMD 64.
Je vous remercie d'avance.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
~From RFC on netiquette... Mail should have a subject heading which
reflects the content of the message.
http://www.dtcc.edu/cs/rfc1855.html
Maybe FreeBSD CD labels ? would be better subject if you were to ask
this again? :)
Quintin
Constantin
On Wed, Feb 18, 2004 at 12:52:48AM -0500, Bob Perry wrote:
I googled (first time ever for FreeBSD issues) as suggested and found
the message you referred to. My system date/time was 5 hours off, if I
remember correctly, so I set the time with 'date 0402172134' and started
my upgrade again
Did you try to burn it using slower speed? This is maybe a long shot..
Cheers,
Martin
On Wednesday 18 February 2004 10:27, Chan Fook Sheng wrote:
hi
yes, i check it wheni burn the 2nd one... to avoid wasting another CD ;)
--
:
:. s pozdravom
:.. Martin Hudec
:..
On Tue, Feb 17, 2004 at 04:34:04PM -0500, Marty Landman wrote:
Something related which I'd like to understand Matthew. I don't know what
the base install ftpd is as
# /usr/libexec/ftpd -V
ftpd: illegal option -- V
ftpd: unknown flag -V ignored
# /usr/libexec/ftpd -v
#
However I
Want to give it a try!
Very experienced with all versions of windows, have been building computers for 15
years..
Sick of the windows restrictions.
What am I in for??
Have tried many versions of Linux.There are too many anymore.
Where is a good place to start?
What's a
I've fairly recently setup a mail server to:
1) learn about email and server configurations and all that goes along
with administrating it.
2) And being able to recieve loads of email from freebsd-questions without
fear of restriction on any other account (i.e. loss of email that I want
to
Yesterday I set up a vinum raid5 array on a fairly slow pc
(p3-500, 128mb pc100, udma66) and started the initializing,
but only to find vinum l showing the drives as 'State: I 38%'
and the vinum processes were gone this morning.
/var/log/messages, /var/log/vinum_history and dmesg doesnt
mention
On Tue, Feb 17, 2004 at 05:29:20PM -0500, [EMAIL PROTECTED] wrote:
ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables:
AE_NO_ACPI_TABLES
ACPI: table load failed: AE_NO_ACPI_TABLES
I have no idea what that
Google was my first choice... i try to find something but i lost my time
i expect that FreeBSD team do something about this I think that its a
bad idea try to find the solution with Linux reverse engineering
Thanks anyway Paul
On Wed, 2004-02-18 at 01:44, Paul A. Hoadley wrote:
On Wed, Feb 18,
Hi there,
On Wed, Feb 18, 2004 at 09:34:29AM +0100, Danny Carroll wrote:
Quoting Greg 'groggy' Lehey [EMAIL PROTECTED]:
If this volume has only one plex, you're lost, unless you can bring up
the failed disk long enough to make a backup.
Here is the output:
20 drives:
D data1
On Tue, Feb 17, 2004 at 11:53:06PM +0100, Maarten wrote:
what if I have a compilehost on which I build FreeBSD(5) images, and I want to build
certain ports, but would like them installed in $imagedir/usr/local/whatever instead
of /usr/local/whatever?
I'm aware of pkg_add's -p option, but
Hi there,
On Wed, Feb 18, 2004 at 12:37:54AM +0800, [EMAIL PROTECTED] wrote:
forgive the newbie question please
I am trying to install a package called bpalogin (it authorises Bigpond
Broadband Cable users (Bigpond is an ISP in Australia)) and I have
followed the instructions from the
On 2/18/2004, Quintin Riis [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
~From RFC on netiquette... Mail should have a subject heading which
reflects the content of the message.
http://www.dtcc.edu/cs/rfc1855.html
Maybe FreeBSD CD labels ? would be better subject if
Hi there,
On Tue, Feb 17, 2004 at 02:30:49PM -0500, Ajitesh K wrote:
We are running NameServ1 Name server on Freebsd 4.8
We are getting some kind of error on my name server nameserv1. FYI, TM25
is laptop of out side client and OS is Windows XP Home.
nameserv1.lan.company.com kernel log
On upgrading ports today, the following happened:
** 'print/foomatic-db-engine' is marked as IGNORE:
is marked as broken: Fails to patch
Is someone working to fix this?
--
Phil Reynolds
o mail: [EMAIL PROTECTED]
|L_ \ / Web: http://www.tinsleyviaduct.com/phil/
(_)- \/ Waltham
Hi,
On Tue, Feb 17, 2004 at 03:10:37PM -0500, bradford fligor wrote:
I bought FreeBSD 5.1 and Handbook for my 10 year old computer nut son for
Christmas and have had problems installing the full graphical version.
When asked for video card on installation, I don't' know what to select. I have
Hello,
I mount two netware shares within /etc/fstab at my FreeBSD desktop and I
noticed in the past that linux applications like mulberry can not access
these volumes. Now I noticed that linux-mozilla-firebird is also not
available to access these shares, but it reports a permission problem:
You
Does anyone know how to configure FreeBSD to use a wireless USB WLAN adapter. The
adapter is a X-Micro WLAN USB adapter.
When i plug it into FreeBSD i get a ugen0 device loaded message. I understand this
means that the OS doesn't specifically recognise it as a WIFI adapter, treating it as
a
Hi there,
On Thu, Feb 12, 2004 at 11:26:18AM -0500, Mike Newell wrote:
I am trying to install FreeBSD on a Dell Precision 410 workstation. The
system has two 18G SCSI drives (Seagate ST318203LW) on an Adaptec 7890
SCSI adaptor (BIOS V2.01.05). I've gone through the entire install and
when
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Perhaps it does. His reply to me is as follows:
yes i need FreeBSD CD labels :)
can you help me with that !
:-/ Perhaps we should refuse to acknoweledge anyone who uses
importand to describe trivial problems.
Quintin
Jorn Argelo wrote:
| On
Quoting Tony Frank [EMAIL PROTECTED]:
Ok, this is wrong - you really just want to define one vinum drive per
physical device.
Ie for a particular disk, give it a single 'vinum' partition using disklabel.
Then use different subdisks to split your space up.
I was afraid of that Noted
5
Hi dear users of FreeBSD,
I'm having problems when trying to use the Modem Alcatel SpeedTouch 330
with the FreeBSD 4.9. Everytime I tried to start the ppp I get the
following error:
ppp[2742]: tun0: Phase: Unknown protocol 0x7075 (unrecognised protocol)
I've done some research in the Internet and
On Tue, Feb 17, 2004 at 04:23:59PM -1000, Baron Fujimoto wrote:
I'm trying to build p5-Mysql from ports (as a dependency for bugzilla), but
I run into the following error:
=== p5-Mysql-modules-1.2219 is marked as broken: unknown MySQL version: 323.
This is on a 4.8 system with a fresh
i've got one problem with altq.
I'm using it in 4.9 stable, but on phisical interfaces i have vlan
trunking. My configured interfaces are vlan0,1 etc.
My question is:
If i setup output control on vlan interface, is traffic on this interface
controled in the same way as on phisical interface.
On Wed, Feb 18, 2004 at 09:33:08AM +, Go'K High wrote:
I learn that linux have a OS 64bit -- freeBSD 64.
I never used linux and I will like to know how could I download it and
installed on my AMD 64.
FreeBSD is not Linux. However, yes, AMD64 is a fully supported
platform which
Hi,
Im trying to install freebsd on a system (i386 system) without cdrom or
floppy.
I created a loader.rc and the kernel (used from /boot/kernel) and I
created an mfsroot from the mfsroot.flp which can be downloaded from
freebsd.org. The kernel is loaded, then mfsroot is loaded.
my loader.rc
Hello,
today when I was working in an ttyv just accomplishing make fetch command
the system(FreeBSD-5.1R) stoped to react to any command.
I could not bring back my system to life using ^C,^D,^\, it also did not
react to Ctrl-Alt-Del.
After switching off/on power, when I reboot,
I get lots of the
On Tue, Feb 17, 2004 at 02:04:06PM +0100, Stefan Krantz wrote:
I would like to extract a large (11GB) tar file on an ext3 filesystem. But
it shows only to be about 3gb large:
yabba# ls -la pictures.tar
-rw-r--r-- 1 root wheel 3317055488 Feb 15 19:03 pictures.tar
loader [EMAIL PROTECTED] writes:
I use FreeBSD5.2.1-RC2, and emacs21. How can I stop the cursor blinking in console?
I thought the default was that it didn't do that on the console...
Check out the blink-* variables;
I think that a .emacs setting of
(blink-cursor-mode nil)
should ensure the
Hi,
On Wed, Feb 18, 2004 at 01:15:18PM +0100, Danny Carroll wrote:
Quoting Tony Frank [EMAIL PROTECTED]:
So you have a subdisk down which means Vinum can still read from the plex
but has to manually calculate the missing subdisk data.
But I assume it cant write till I replace it..
I
On Tue, 17 Feb 2004, Saint Aardvark the Carpeted wrote:
Jack L. Stone disturbed my sleep to write:
This would be the steps:
- grep(1) the new string and pipe to sed(1) ..??
- sed(1) to find the old string replace with the new string in a file.
Am I on the right track??
I think
On Wed, Feb 18, 2004 at 06:11:40AM -0500, Osmany Guirola Cruz wrote:
i expect that FreeBSD team do something about this I think that its
a bad idea try to find the solution with Linux reverse engineering
The problem is that Logitech hasn't released the details on how to
communicate with the
[EMAIL PROTECTED] writes:
just stumbled over this. If I try to do a dump to a file which has a ':'
in its name or path, dump tries to connect to a server (which is
obvious as this is the notation for a remote dump).
Precisely.
example:
# dump -f some:file /var
DUMP: rcmd: getaddrinfo:
Yes, I do
Alexus
-Original Message-
From: matthew [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 17, 2004 7:36 PM
To: Dmitry Chorine
Cc: [EMAIL PROTECTED]
Subject: Re: Freebsd-4.9
On Tue, 17 Feb 2004, Dmitry Chorine wrote:
Hi
I just download ISO of 4.9-RELEASE and after
In loader.rc i did unset acpi and now it gets a little further:
after loading mfsroot (rotating /), after that i see:
no such file or directory
Then press enter to boot kernel now
the kernel is located /boot/kernel/kernel
when i press enter all i see is a / and the system hangs.
Any hints?
Bonjour,
je vien d'apprendre que linux à un OS 64bit -- freeBSD 64.
Je n'ai jamais utilisé linux aupartavant et j'aimerai bien savoir
comment pourrais je le télécharger et l'installé sur mon AMD 64.
Je vous remercie d'avance.
[EMAIL PROTECTED] writes:
installed 4.9, when i boot i get the message: panic:contigmalloc1:
size must not be 0 and that's as far as it goes. i dual boot with
linux, the mbr is not a problemm since i can select either os
without problems. anybody know what the problem is and a fix?
On Wed, Feb 18, 2004 at 09:20:32AM -0500, Lowell Gilbert wrote:
[EMAIL PROTECTED] writes:
just stumbled over this. If I try to do a dump to a file which has a ':'
in its name or path, dump tries to connect to a server (which is
obvious as this is the notation for a remote dump).
Hello all,
I'm needing to set up my machine as a PDC. When I go to add users using the
smbpasswd -a username command I get the following error. Does anyone have
any suggestions on how to fix this error?
New SMB password:
Retype new SMB password:
LDAPS option set...!
fetch_ldap_pw: no ldap
We all have our preferences. If you're looking for a Turn-Key
solution, Courier-MTA or Mail Toaster set-ups are damn fine. If you're
up for the learning experience, which will broaden your knowledge of how
all the pieces fit together, below is my open-ended recommendation:
Postfix (the
Hi,
I am trying to install and run interchange on my FreeBSD server. I first
updated the ports directory- succesful. Then I did a
make -DCHECK_FOR_IC_USER all install. This went all well. A new user and
group (interch) is added and it seems that it is installed properly. Next
thing to do is
Hi all,
I'm running 4.9-STABLE built 17th Feb based on cvsup on same day.
Custom kernel in use with device polling enabled on fxp0.
Kernel config is attached in case anyone can spot anything obvious there.
It's an 'older' system, Pentium2-200, 132mb ram, basic Asus slot1 m/b
(Via chipset) with 2
Martin Hudec (www.webcom.sk) wrote:
Did you try to burn it using slower speed? This is maybe a long shot..
Cheers,
Martin
Martin actually has a point. I have had problems with the FreeBSD 5.1.2
ISO's - which made me think that for some reason the ISO's I was
downloading were corrupted
Hiya folks,
I finally was able to work past my overheating and KDE issues. I'm proudly
running 3.2.0 now.
Was wondering, I prefer to use icons of my own on the task bar. I normally
like to have Konqueror there with a differant icon. The issue however, is
that I am unable to.
Hello Friends ,
I am Arunav Roy . I have recently started working on
NETGRAPH . Even I am planning to write program for a
netgraph node through which I could connect my node
to the Ether node and read the packets , capture them
and make changes
in the packet fields .
I
I think you were right, my date was incorrect, I changed my date rebuild
world and now it's installing just fine
Thanks
-Original Message-
From: Kent Stewart [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 18, 2004 12:11 AM
To: [EMAIL PROTECTED]
Cc: matthew; Dmitry Chorine
Subject:
I'm in need of urgent help. I have a production 4.9-RELEASE
server. I track STABLE, last cvsup/make world was about two
months ago. After powering on after an extended power outage
(was given advanced notice by electric company and I shut the
server down before the outage occurred), the
(I'm not subscribed on the list, so please include me in all replies)
Has anyone ran into problems with Apache 1.3.x segfaulting (signal 11)
under FreeBSD 5.2.1-RC[12]? I had to recently re-install FreeBSD on my
home server and grabbed the latest src-all for RELENG_5_2, which ended
up being for
I am running 5.1-RELEASE-p2 with dvd+rw-tools version 5.17.4.8.6 and
mkisofs version 2.0.3_1 and I'm having some problems with mkisofs and
files larger than 2GB. Basically what I am trying to do is backup some
database dumps to a dvd. Everything was working fine until the dumps got
larger than 2
how do i fix mplayer-gtk-esound-0.92.0_5 so i can install mplayer? thanks
mmp# make install clean
=== mplayer-gtk-esound-0.92.0_5 is marked as broken: Does not compile.
=== Cleaning for arts-1.2.0,1
=== Cleaning for esound-0.2.32_1
=== Cleaning for lame-3.95.1_2
=== Cleaning for
On Wed, 2004-01-21 at 22:51, Molnar Csaba wrote:
On Monday 19 January 2004 20.08, Florin Betivoiu wrote:
Hello. Transparent menus in Fluxbox don't work on my desktop. I run
FreeBSD 5.2. Any suggestions? Thanks in advance.
This did it.
Thanks!
-fs
From: Saint Aardvark the Carpeted [EMAIL PROTECTED]
Date: 2004/02/17 Tue PM 10:53:30 CST
To: [EMAIL PROTECTED]
CC: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: your mail
[EMAIL PROTECTED] disturbed my sleep to write:
Any ideas?
TIA,
FS.
I had
Guys,
I would like to help out the kdevelop project by building and testing releases
on my system. However, as it comes from the project, the source won't
configure OR (if I managed to dink with the configure script enough to get it
to complete) compile on my system. This includes the released
Hi list, anyone are using exim as a MUA ??? I can't configure it to
send mails, or anyone know a very easy configurable mail client for FreeBSD
??? Thanks in advance...
___
[EMAIL PROTECTED] mailing list
[EMAIL PROTECTED] writes:
On Wed, Feb 18, 2004 at 09:20:32AM -0500, Lowell Gilbert wrote:
[EMAIL PROTECTED] writes:
I haven't tried this, but from looking at the man page, I might expect
dump -f /path/to/dump/dir/some\:file
to work...
Sorry no, this way the colon is just
On Monday 16 February 2004 3:16 am, Kent Stewart wrote:
On Sunday 15 February 2004 07:04 pm, Chris wrote:
On Sunday 15 February 2004 09:00 pm, Thomas T. Veldhouse wrote:
Chris wrote:
Is is me? Or has something changed in 5.2 that tends to make
systems freeze up during portupgrade?
Want to give it a try!
OK. Good idea.
Very experienced with all versions of windows, have been building
computers for 15 years..
Sick of the windows restrictions.
What am I in for??
Some learning work and then some good times with a actual working system.
Have
List,
My root partition is full, but I cannot figure out how it got filled so
fast the last security check claimed there to be 5% of capacity and now
its at 108%. Where else can I check to see what is filling the root
partition?
Thanks in advance
--will
unfortunately, it's likely it's your fault for using email, hehe... at
least one of the recent windows viruses steals addresses from the address
books of infected machines and sends out mail to/from those addresses.
It's likely that someone that had your address in their address book was
On Wednesday 18 February 2004 01:59 pm, ian j hart wrote:
If I forget to clean the filters, the temperature will rise, and the system
becomes increasingly unstable. A few degrees increase is enough.
My advice is to clean any filters, fans and heatsinks and check the fans
spin correctly. If
hello,
would you be able to recommend a good (the best?) virus scanning utility for
freebsd?
thanks in advance,
john
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
It's a virus (my AV calls it Worm.Gibe.F). I bet most of the list gets
these occasionally. Some hapless windows user got infected and has you
in their address book (perhaps through the outlook
auto-add-addresses-to-addressbook-function applied to something you
posted once on a public list??)
Patrick Rooney wrote:
Want to give it a try!
Good for you!
Very experienced with all versions of windows, have been building computers for 15 years..
Sick of the windows restrictions.
You mean where do you want to go today
didn't get you there? ;-)
What am I in for??
--- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote:
Here you should have answered `y' (it doesn't ask you to change
anything yet). Let's try that again, shall we?
Sorry, ok I went through it again, saying Y to all the Continue? prompts
but N to all the ones that talked about changing
with
it, and when you are ready to buy, use the code gnomies to get 40% off
for life. Just think of it as my parting gift to all of you!
[[44]Eric]
[45][Back to Top]
[46]http://channels.lockergnome.com/web/backissues/20040218.phtml
Your
On Wed, 18 Feb 2004, Eric F Crist wrote:
OK, I'm tired of trying to configure sendmail. I think I give up. I've hear
postfix and qmail recommendations the most. I need a mail server that can do
a couple of things for me:
1) Host multiple domains on the same server
2) Easy user management
MailMarshal (an automated content monitoring gateway) has
not delivered the following message:
Message: B0423d.0001.mml
From:[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: information
This is due to automatic rules that have determined that the
intended recipient
Bob Perry [EMAIL PROTECTED] writes:
I was attempting to upgrade from 4.8 to 4.9 and the program stopped
during the makeinstall phase with the following error messages:
==gnu/usr.bin/groff/font/devascii
Making R
expr: not found
***Error code 127
Is your computer's clock set correctly?
On Tue, 17 Feb 2004 12:08:52 -0800
Derek Burns / Bend-Pak [EMAIL PROTECTED] wrote:
Is there a way I can administer my FreeBSD web server from my pc?
Sure, there's ssh. With ssh you can also do sftp, which works like ftp,
only it's encrypted via ssh.
If your server is on a trusted network, you
Hi,
Everything I've seen says no, but as a last resort: has anyone managed
to get one of these working with any version of FreeBSD?
Thanks,
PWR.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
I recently bought a micro innovations wireless USB mouse and it worked great
with my FreeBSD. It didn't work too good with windows, so I bought a
Microsoft wireless USB intelimouse. No matter how many times I try to
connect the mouse and the receiver, it wont work. I tried going to the
peripherals
How can i make the scroll button work???
__
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools
___
[EMAIL PROTECTED] mailing list
I'm looking for MLDv2 and IGMPv3 support in FreeBSD.
Is it in 4.9 or 5.2?
thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi,
Anyone using this combination? I'm offered a setup like this for a high IO
system (log server) and would just like to make sure that FreeBSD will see
the Raid 5 array properly.
Does FreeBSD see the remove-disk/add-disk events?
If so, can the raid array be re-built without shutting down
I think the FreeBSD boot manager took out my laptop drive and I'm
hoping to get it back (and willing to go to some extensive effort
to do so).
Dual boot Win2K and FreeBSD. Just upgraded it to current yesterday.
Rebooted FreeBSD a number of times with no issues. Today, I needed
to use the Win2K
unfortunately, it's likely it's your fault for using email, hehe...
Damn this new fangled technology! If only this mailing list was backwards
compatible with the USPS. :)
at
least one of the recent windows viruses steals addresses from the address
books of infected machines and sends out
On Tue, Feb 17, 2004 at 07:25:23PM -0500, Patrick Rooney wrote:
Want to give it a try! Very experienced with all versions of windows,
have been building computers for 15 years.. Sick of the windows
restrictions. What am I in for?? Have tried many
versions of
On Tue, Feb 17, 2004 at 07:29:03PM -0600, [EMAIL PROTECTED] wrote:
Anyhow, within the month that I've had my server running I've been
recieving numerous emails that are obviously malicious to Windows users
(i.e. contain an attachment with some random-letters.exe and nonsense
about a patch).
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 18 Feb 2004, BUTTERWORTH,THADDAEUS (HP-Boise,ex1) wrote:
Hello all,
I'm needing to set up my machine as a PDC. When I go to add users using the
smbpasswd -a username command I get the following error. Does anyone have
any suggestions on
On Feb 18, 2004, at 5:38 PM, Linh Pham wrote:
Has anyone ran into problems with Apache 1.3.x segfaulting (signal 11)
under FreeBSD 5.2.1-RC[12]? I had to recently re-install FreeBSD on my
home server and grabbed the latest src-all for RELENG_5_2, which ended
up being for 5.2.1-RC2. Afterwards, I
hello,
I'm still very new to freebsd and have run into a glitch upgrading from:
dawn# uname -a
FreeBSD dawn.brasil 4.9-PRERELEASE FreeBSD 4.9-PRERELEASE #0: Sun Sep 28 08:00:09 EDT
2003 [EMAIL PROTECTED]:/usr/src/sys/compile/LINT i386
I ran a make buildkernel kernconf=GENERIC with out
I have read that the second ISO image is a live CD. I have just burnt a
CD, but all I get is the usual installation tool (kernel
configuration...), no option to get out of there without rebooting...
??? I probably missed something...
Is this a different project:
http://livecd.sourceforge.net/
?
Ajitesh K [EMAIL PROTECTED] writes:
Hi friends,
I am getting this error message from my name server nserv1. As far as i
know PC user5 is a Win XP (Home) PC.
nserv1.lan.company.com ipfw denied packets:
65535 759856 86646781 deny ip from any to any
nserv1.lan.company.com kernel log
marlon corleone wrote:
how do i fix mplayer-gtk-esound-0.92.0_5 so i can install mplayer?
thanks
mmp# make install clean
=== mplayer-gtk-esound-0.92.0_5 is marked as broken: Does not compile.
That's for you to decide. If you're
not a coder, then maybe gritch to
the port maintainer; OTOH,
how do i fix mplayer-gtk-esound-0.92.0_5 so i can install mplayer? thanks
Dunno, however if you can live with mplayer without GUI (like me), you can
modify the mplayer port's Makefile so that it doesn't use any GTK stuff.
I.e., comment out:
#.if ${HAVE_GNOME:Mesound}!=
#WITH_ESOUND= yes
Hi list, anyone are using exim as a MUA ??? I can't configure it to
send mails, or anyone know a very easy configurable mail client for FreeBSD
I don't know about exim, but for an easy-to-get-working MTA (not MUA) you
might try postfix. IIRC no configuration is necessary to get it
Greetings:
I am looking for growisofs, but I can't find it in the ports.
find . -name *growisofs*
Any thoughts?
Thanks,
Brian
_
Get fast, reliable access with MSN 9 Dial-up. Click here for Special Offer!
On Feb 18, 2004, at 9:00 PM, Will Prater wrote:
My root partition is full, but I cannot figure out how it got filled
so fast the last security check claimed there to be 5% of capacity and
now its at 108%. Where else can I check to see what is filling the
root partition?
Try
cd /
On Wednesday 18 February 2004 10:20 am, Chris wrote:
Hiya folks,
I finally was able to work past my overheating and KDE issues. I'm proudly
running 3.2.0 now.
Was wondering, I prefer to use icons of my own on the task bar. I normally
like to have Konqueror there with a differant
Will Prater [EMAIL PROTECTED] writes:
My root partition is full, but I cannot figure out how it got filled
so fast the last security check claimed there to be 5% of capacity and
now its at 108%. Where else can I check to see what is filling the
root partition?
du -x / will tell you what is
On Wednesday 18 February 2004 16:50, BUTTERWORTH,THADDAEUS (HP-Boise,ex1)
wrote:
I'm needing to set up my machine as a PDC. When I go to add users using the
smbpasswd -a username command I get the following error. Does anyone have
any suggestions on how to fix this error?
Yes:
$ smbpasswd -w
Exim is an MTA not a MUA
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Xpression
Sent: Wednesday, 18 February 2004 10:13
To: FreeBSD-questions
Subject: mail client question...
Hi list, anyone are using exim as a MUA ??? I can't
1 - 100 of 128 matches
Mail list logo
