* On Thu, Aug 07, 2003 at 09:38:23 -0400, Nathaniel McCallum wrote:
I'd like to vote that a distcc howto get some space in the official
install documentation... Lots of people are using it, and there is a lot
of confusion (and wrong information) on how to use it.
Although there is a bit on
When executing emerge I get these error-messages:
Invalid or unset record 'packages' in mtimedb.
Invalid or unset record 'eclass' in mtimedb.
Anyone know why and how I can get rid of them?
Patrick Börjesson
--
Public key id: 4C5AB0BF
Public key available at search.keyserver.net[:11371]
On Sunday 10 Aug 2003 12:49, Ralph F. De Witt wrote:
Hi all:
I have just done a fresh install of Gentoo. When I tried to configure
my printer using Cups and the latest hpijs version 1.4.1, I came up
with an error message telling me the file was corroupted or broken.
When I looked in the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Just a quick note : If you want to have mutlitple directories in your
distfiles search, try my patch. There are still a number of things that
don't work. Make sure you have the original portage.py as backup.
On Saturday 09 August 2003 20:17, Eduardo Alaminos wrote:
1) I want to run XFree86 4.3.0r2, at: 1024 x 769 x 16 bpp 85 Hz,
but X start at 1400 x 1050 x 8 bpp (from Info Center)
I run kXconfig to change that, it put a ModeLine 1024x768/85Hz... in
/etc/X11/XF86Config but nothing has changed.
On 2003.08.14 04:21, Terry Churchill wrote:
Sorry if I sound a bit thick, but I've worked out that:
USE=-gnome emerge xmms
Would emerge it without the older gnome stuff.
That is correct.
Should I just set -gnome in make.conf to ensure other packages don't
pull in older stuff? What do I stand
I've had good luck with Linux software raid arrays. It's so
durn easy, I don't see any reason to bother with the low end
RAID cards. (The more expensive cards can offer advantages
not otherwise available.)
Agreed. I have three systems right now that are fully RAIDed, one a
high use server,
any HW problems ?
--
[ Julius Loman ][ [EMAIL PROTECTED] ][ http://lomo.kyberia.net ][ icq:35732873 ]
The box said 'Requires Windows 95 or better', so I bought a Macintosh.
pgp0.pgp
Description: PGP signature
Hi Everyone
I synched up to the latest KDE etc on my gentoo system. Now everytime i
start konqueror (or most X apps), I get the following error. I searched the
web, a lot of people have faced the same problem, but I could not find the
solution to it.
Anyone knows how to fix this?
WARNING: KDE
On Wed, Aug 13, 2003 at 07:57:27PM +, Hemmann, Volker Armin wrote:
On Wednesday 13 August 2003 17:43, Mark Knecht wrote:
Hi,
I'm having a problem understanding how to actually handle a blocked
package in emerge and move forward. I've attached a portion of what I'm
seeing in my
You did a great job Robin. I think as it stands now the program really
provides a nice set of best-case scenario flags (Which is what I prefer
most). If in the future you extend it to include experimental more
strict optimizations, great, but as it stands now I like it. Thanks for
providing
On Sunday 10 August 2003 10:16 pm, Peter Ruskin wrote:
On Sunday 10 Aug 2003 14:27, Ralph F. De Witt wrote:
On Sunday 10 August 2003 08:00 pm, Peter Ruskin wrote:
On Sunday 10 Aug 2003 20:54, Peter Ruskin wrote:
On Sunday 10 Aug 2003 12:49, Ralph F. De Witt wrote:
snip
Sorry,
On Mon, 2003-08-11 at 10:54, Thomas Preissler wrote:
Which startparameters for the uml-kernel do you use?
Hey Tom. At the moment I don't use any. Which may in itself be a
mistake, certain characters come out wrong []{} and a few others. I
think that might be the xterm though. I'm not sure yet.
How can I tell where scsi_free() comes from? I'm guessing that it's from
the aic7xxx driver but how can I tell?
When you find a suspect routine, grep the kernel sources for it.
Duhhh... sorry, forgot to engage brain.
The last time I used this technique, BTW, I identified some buggy SCSI
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Is there any document that you would recomend to get lmsensors working on
Gentoo with gentoo-sources ? (I have an Asus A7N8X Deluxe board).
Thank you.
- --
Pupeno: [EMAIL PROTECTED]
http://www.kde.org
- ---
Help the hungry children of Argentina,
Renat Golubchyk wrote:
I was going to install some kind of a SMART monitoring daemon. I found two
packages in portage: app-admin/ide-smart and sys-apps/smartmontools.
Is anybody using them? What's the difference?
sys-apps/smartmontools come with more documentation, and they seem to be
Hi,
I'm trying to get serial console to work on gentoo. So far, I've got:
BIOS/POST/ACPI/Boot ROMs
Grub
Kernel debug messages (as the kernel loads)
agetty (for logins)
all going to ttyS1 (the RJ45 serial port), but not the output of the runscripts!
Does anybody have some pointers on how to
bash-2.05b# emerge -up world
These are the packages that I would merge, in order:
Calculating world dependencies ...done!
[ebuild U ] media-video/ati-drivers-3.2.4 [2.9.13-r1]
so after emerge -u world
...trying a lot of mirrors..
!!! Couldn't download fglrx-glc22-4.3.0-3.2.4.i586.tar.gz.
My only regret is that I'll no longer be using the RAID card to its full
extent. However, I've also read some interesting opinions that talk about
how a low-end RAID card (such as the tx4) can be a bottleneck on higher-end
systems. Mine's a dual-mp 1.4Ghz (1600+) configuration. Such opinions
Hello everyone;
I'm trying to install alsa on my desktop and I am running into a
problem. Following the document @
http://www.gentoo.org/doc/en/alsa-guide.xml
I got some new hard drives and decided that I was just going to
reinstall my whole system. I have had alsa installed and working
I've got a fresh install of Gnome-1.4 (athlon-xp optimised) and am trying
to install gnome. It just won't work and keep giving the following error
when trying to install gnome-terminal, which is the first item it attempts
to install.
!!! ERROR: x11-terms/gnome-terminal-2.2.1 failed.
!!! Function
swapon: /mnt/sammy/swapfile: Invalid argument
i had put a space but, still no dice
--
[EMAIL PROTECTED] mailing list
nope, but same problem if i put it in /home, i was woundering what would
happeren if it tryed to page over the network
--
[EMAIL PROTECTED] mailing list
You're acting like this is a big deal. Unless I'm missing something, it's
really not.
I don't know how much people know about how Portage calculates its dep tree,
so I'll start from scratch. When you emerge a package, two important (for
our purposes) things happen. 1) a directory in /var/db/pkg is
Now,
I for one would be -VERY- interested in seeing same system comparsion
between the flags: -Os -O2 and -O3 (on the same -march= ) for a
single system.
You can get a gist of this (not necessarily benchmarks, but stability
results) in the CFLags central thread. It took me the better part
Am Mittwoch, 13. August 2003 16:02 schrieb ext Adam Dunstan:
swapon: /mnt/sammy/swapfile: Invalid argument
i had put a space but, still no dice
Another question: What did you mount on /mnt/sammy? I'd guess it won't work
if it is an NFS mount.
HTH...
Dirk
--
Dirk Heinrichs |
Matt:
Just to give you something to run with before someone more suited
answers: have you emerged gentoolkit and used the qpkg tool to figure
out the deps on lirc, to maybe figure out what it is you are installing
that wants it installed so bad?
Also you can try doing a -* in your use flags
On Wed, Aug 13, 2003 at 01:04:14PM -0700, Riyad Kalla wrote:
Just to give you something to run with before someone more suited
answers: have you emerged gentoolkit and used the qpkg tool to figure
out the deps on lirc, to maybe figure out what it is you are installing
that wants it
After having resolved the problem when emerge downgraded my glibc from 2.3.2-r1
2.3.1-r4, i did an emerge -u system which upgraded my glibc to 2.3.2-r1 again. Emerge
continued to update packages, but choked on selinux-small-2003040709-r3. I then did an
emerge -up system to see what packages
Some additional information; I decided to try to do an emerge -U system rather than
emerge -u system, being under the impression that emerge wouldn't downgrade my glibc
to 2.3.1 again. Well, it tried to do that anyway.
It feels like my emerge is broken.
If anyone can explain to me what's
Sorry about the double post. I think that was an example of evolution
trying to be smart. So it swas going to email alan (changed that to
gentoo-user) but I think it was also sending it to the list but not
showing me
--
Christopher
In 1968 it took the computing power of 2 C-64's to fly a rocket
Is anyone running Gentoo on the new Intel 875P chipset (that includes
intel's ICH5 impl. i.e. Asus's midline 875 board uses 3com lan and
promise SATA controller, but their highend 875 board uses the ICH5 from
intel).
If you are, what Kernel are you using and what magic did you have to
perform
begin quote
On Thu, 14 Aug 2003 10:22:34 +1200 (NZST)
Jamie Dobbs [EMAIL PROTECTED] wrote:
!!! ERROR: x11-terms/gnome-terminal-2.2.1 failed.
!!! Function einstall, Line 343, Exitcode 2
!!! einstall failed
I've searched through the forums and tried the suggestions I've found
there
I have baselayout-1.8.6.10, kernel 2.6.0-test3-mm1, and util-linux-2.12.
Upon installing util-linux-2.12, I was no longer able to remount my root
filesystem for checkroot to work on boot. I really should be able to
just mount -n -o remount,ro / or use /dev/root, or whatever is in
/proc/mounts,
I am in the process of trying to upgrade gcc from my old Gentoo 1.1
system. I am getting half way through my 501 packages and the build for
app-misc/lirc-0.6.6-r1 borks with some crazy sandbox error.
However, I don't even use lirc and have tried to remove it, however, it
is still listed then I
On Wednesday 13 August 2003 17:43, Mark Knecht wrote:
Hi,
I'm having a problem understanding how to actually handle a blocked
package in emerge and move forward. I've attached a portion of what I'm
seeing in my xterm, along with the little bit of the man page on emerge
that seems to apply,
On Thu, Aug 14, 2003 at 03:05:39PM +0200, Arne Halenza wrote:
Hi Michael,
maybe your DMA mode is not activated? You can check and activate it
using the hdparm command (check the man-page about the command, I
don't know the details at the moment). I had a similar problem in the
past. The
hi there,
for months now i got the problem that X eats my mem and cpu after running awhile.
i dont know the problem, since other guys told me they got much less problems than me
with this...
does anyone know a problem that could cause this? i could imagine its got something to
do with gtk,
Have you tested the memory to make sure you havent got a bad stick? Try
emergeing memtest86, if there is a memory leak it should spot it.
does an memory error cause programs to fill up memory?
sounds bit weird... but if so, it explains many of my problems *lol*
arne
--
[EMAIL
I have a machine that I cannot compile a stable 2.4.20 kernel for,
yet
the
one off of the 1.4_rc2 liveCD works fine. I'm guessing there is an
option
or a patch that is/isn't set/applyed. Apart from good old trial and
error
how the heck do I work out what is giving me the problem?
Karl Huysmans [EMAIL PROTECTED] writes:
2-disk/1-spare software RAID 1.
This will not protect you against accidental file deletion or (???)
viruses, but at least, you don' t even have to think about backups.
At least in typical office environments backups are mostly used
exactly for that
Ok, good. I will look when I have a spare 0.5 hours or something as
well.
Mostly I wanted to know I had not pulled a thinko.
Since I know it's not just me now, I'll devote a little bit of time
to it later tonight. Maybe between us we'll figure it out in short
order.
I'm not sure that it makes
Interesting.. I am still trying to figure this out.. (Gave me a good idea to do it
myself.. )
I use sysklogd-sql.. Its very easy to get it out my database. :) But if I figure out
how to do separate files, I will let you know..
Jeff
-Original Message-
From: Thomas T. Veldhouse
begin quote
On Thu, 14 Aug 2003 19:20:46 +0200
a_k_b [EMAIL PROTECTED] wrote:
as you can see X uses about 44% of my memory at the moment (cpu time
ok atm). when i restart x its all okay for a few hours again... but
then its just the same again :-(
Ok , this soudnds rather aggrevating
Chris I wrote:
On 2003.08.09 09:47, Peter Eis wrote:
Chris I wrote:
My usb mouse does this when I plug it in. No idea why yet, but I
dont see how your solution would have any effect.
Check for the correct mouse protocoll. Try IMPS/2 if it's a wheel
mouse or just PS/2 if it's still not
I'm using a Promise TX4 RAID card to create a four-disk array, made up of
two pairs of striped, mirrored 60G drives. In other words, I take two 60G
drives and stripe them together into a 120G partition for performance, then
mirror that striped pair with another identical to it for data integrity.
I get the following error when trying to emerge kdebase:
-
Performing head fix on klipper/klipperrc.desktop
cd . \
/bin/sh
/var/tmp/portage/kdebase-3.1.3/work/kdebase-3.1.3/admin/missing --run
automake-1.7 --foreign Makefile
configure.in:39: version mismatch. This is
Are you refering to Gnome? as I don't see any downgrades
marked (they have a D there). If it's because the UI
needs that version of Gnome and will install it in a
different slot so it coexists with your current version
which appears to be 2.x.
On Thu, 7 Aug 2003 11:47:50 -0400 (EDT)
Jason
Heh. Methinks my wife wouldn't like seeing that image viewer. Besides,
it wants an older xine-lib than I need for totem so that one's out.
Thanks anyway. :-)
--Jason
On Thu, 7 Aug 2003, Scott Carmichael wrote:
I also had nothing but trouble with gthumb, and terrible replyage from the
-- quoting Brave Cobra --
I've got the same problem and your answer doesn't seem to fix it.
Any other suggestions?
I already posted a solution to this problem in *THIS* thread!
It works fine for Christopher, so maybe for you as well?
Greets, Matthias
--
Matthias F.
On Fri, 8 Aug 2003 01:41:30 -0500
Steven Elling [EMAIL PROTECTED] wrote:
On Thursday 07 August 2003 21:50, Collins Richey wrote:
On Thu, 7 Aug 2003 21:13:05 -0500
Steven Elling [EMAIL PROTECTED] wrote:
On Thursday 07 August 2003 17:02, Dr. Robert M. Fuhrer wrote:
At 03:55 PM
Your initial discussion did not relate to my bug at all.
Yes, it did. It explained, in fact, exactly why this happens. It may have
been too verbose or basic for you, but again, I have no idea how much you
know about how Portage works, and you don't seem to have read it at all.
It's possible that
[EMAIL PROTECTED] writes:
correct me if this isnt the case with the new live cds (still using an
rc1 disc myself), but there is no portage on the livecds either.
There is portage and python in the stage balls, but that isnt on the
install cd in a usable form.
correct!
Nathaniel
--
[EMAIL
I am looking in the menuconfig from the gentoo-sources 2.4.21 but I can't see
any support for my broadcom network card anymore :-(
Has it gone? It was supported in the 2.4.20-r5 kernel
--Kees
--
[EMAIL PROTECTED] mailing list
this is a bit of overkill don't you think
why not just :
ebuild file.ebuild unpack
cd /var/tmp/portage/packagedir/work/packagedir_unpacked
patch source tree
ebuild file.ebuild compile
ebuild file.ebuild merge
Henti,
I thought I needed a qmerge at the end of this process to actually
Hello
I'm running 2.6.0_beta2 kernel. In enlightenment I can open Xterms
but not Eterms. If I type Eterm in Xterm I get the following error
message.
bash-2.05b$ Eterm
Eterm: Error: Can't open pseudo-tty -- No such file or directory
Eterm: Error: Unable to run sub-command.
I've addded Unix
It depends on the amount of data you have. Hard drives and tapes can backup
a lot of data. However, for a home user you probably aren't backing up that
much. For ease of ue take a look at using a CDR or CDRW. If you have more
than fits on one CD then split you backups up to use more CDs.
On Thursday 07 August 2003 03:06 pm, Gentoo wrote:
eList,
Hi everybody..
Every time I use emerge -S to look for something I've got to wait an
eternity for results to appear.. so I feed up with this and I was
thinking to turn the whole portage system (the pseudo database I
hi,
Probably many of U building .ebuild are tired of SKELL-ing .ebuilds manualy.. i.e.
create nececary directories, copy skel.ebuild to your portage-working dir, then delete
all the coments edit the fileetc..
so was I :) even i dont do ebuild so often... and below is a script to simplify
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 11 August 2003 20:49, Spider wrote:
begin quote
On Mon, 11 Aug 2003 17:24:35 -0300
Pupeno [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Any other IRC client that supports SSL ?
off the top of my head
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Calculating world dependencies /
!!! all ebuilds that could satisfy =sys-libs/db-4.1 have been masked.
!!!(dependency required by net-nds/openldap-2.1.22 [ebuild])
!!! Problem with ebuild app-arch/rpm-4.2_pre069
!!! Possibly a
Hello
Emerge xalan fails with the following error. Any suggestions?
$ emerge xalan
Calculating dependencies ...done!
emerge (1 of 1) dev-java/xalan-2.5.1 to /
md5 src_uri ;-) xalan-j_2_5_1-src.tar.gz
Unpacking source...
Unpacking xalan-j_2_5_1-src.tar.gz to
For what its worth, you are one of those people. Your post happened
twice just now.
On Wed, 2003-08-06 at 15:27, Tom Wesley wrote:
On Wednesday 06 August 2003 21:18, David H. Askew wrote:
I've noticed that I get duplicate emails on this list from several
users. What might be causing this ?
Hi everybody,
I have compiled the alsadrivers, util etc. in order to use my soundcard and it
works great but I have to run:
$ amixer set Master 100 unmute
$ amixer set PCM 100 unmute
on every startup, otherwise no sound is emmited!
Why can't amixer save the configuration of the soundcard???
If
CrPy wrote:
Hi,
there are a concern, I like to have cleared and dicussed.
1. Why does
emerge -upv $(qpkg -I -nc) != emerge -uDpv world?
The first try to update all packages. All installed package are updated.
The second try to update all packages in world 'deep'. But the irst and the
Yep, re-emerging gcc for CHOST i686 seems to do the trick.
avifile is happily compiling along right now.
...
Yep worked fine
Harebrafolk
Jimmy
On Wednesday 06 August 2003 12.20, Jimmy Rosen wrote:
Hi there, I'm getting the very same thing:
checking for C++ compiler default output...
Hello,
* Christopher wrote on 08/11/03:
On Mon, 2003-08-11 at 09:33, Andrej Kacian wrote:
Have a peek in /etc/inittab.
This helps, but there's still a problem. Commenting out those lines just
disables the tty. I still get the windows (which are unclosable without
shutting down the uml).
On Wednesday 06 August 2003 10:10 pm, Chris I wrote:
On 2003.08.06 21:21, Jerry McBride wrote:
I tought I'd chime in here to touch base with anyone having problems
with the
new 2.6.0 test kernel and touchpads in laptops.
http://marc.theaimsgroup.com/?l=gentoo-userm=106020782729526w=2
I
Op donderdag 7 augustus 2003 23:31, schreef Marius Mauch:
[T][S][I][P][M][B][L]
The buttons were there with xchat-2.0.0 and not with xchat-2.0.3, so
Ok! Then I know that is not something that I did wrong :-)
I need those buttons sometimes..
They will come back some day I hope :-)
thanks
Never mind. Problem solved.
cheers,
Mark
1) Does the version of fltk installed on my system have xft support
built in?
Wizard root # emerge -p fltk
--
[EMAIL PROTECTED] mailing list
...and a mighty w00t! goes up from the crowd. This would be wonderful
because it would allow me to have a firewall install script, a webserver,
script, etc. When I go to install a machine, I just pull the correct
script and come back the next morning.
=C=
*
* Cal Evans
*
The only thing I can think of (off the top of my head) is that you may have
forgotten to compile reiserfs support into your kernel..
JAT
rlc
On Wed, Aug 06, 2003 at 09:33:16AM -0400, rh wrote:
Just wondering if anyone else has had bad experience with reiserfs.
I started using Gentoo a
On Sunday 10 Aug 2003 14:27, Ralph F. De Witt wrote:
On Sunday 10 August 2003 08:00 pm, Peter Ruskin wrote:
On Sunday 10 Aug 2003 20:54, Peter Ruskin wrote:
On Sunday 10 Aug 2003 12:49, Ralph F. De Witt wrote:
snip
Sorry, you said 940, I did 948...
$ ll
Hi again,
many thanks for the tip with the symbolic link. I set it now, but I also
tried it with just de and unfortunately none of both are used.
Even not with the link set. All other programs work in german language.
Any other suggestions?
Many thanks in advance,
yours Henri
--
Henri
Hrm...What does the SLOT=1 in gnome-vfs-1.0.5-r3.ebuild mean? I'm still
a little new to gentoo. I've only be using it for a few months now.
Thanks!
--Jason
On Thu, 7 Aug 2003, brett holcomb wrote:
Yes, they will coexist. To check for sure look at the
ebuild for a SLOT= entry.
It
I just was gonna reply with the fact I got that when my /bin/bash was not right.. (or
it would tell you file not found)..
Glad you got it working..
-Original Message-
From: Ariel Sandberg [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 10:04 AM
To: '[EMAIL PROTECTED]'
Subject:
Ok... I'm starting a rather ambitious project, and perhaps it's too ambitious!
I'm having a hard time putting it into non-confusing words, for some reason,
I can picture it in my head, but describing it to a mailing list is harder
than I thought!
What I'd like to setup is a compile farm/cluster,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 08 August 2003 08:58 am, Bram De Smet wrote:
| Calculating world dependencies \
| !!! all ebuilds that could satisfy virtual/glu have been masked.
| !!!(dependency required by x11-libs/qt-3.1.2-r4 [ebuild])
|
| !!! Problem with ebuild
How do I get the mouse to work in virtual console?
Tom
--
[EMAIL PROTECTED] mailing list
* Theofilos Intzoglou (2003-08-10 13:54 +0200)
This was exactly what I was looking for! logrotate cannot handle the
logs that emerge creates unfortunately [...]
What's so special about the emerge logs that logrotate can't handle?!
T.
--
[EMAIL PROTECTED] mailing list
Hi all,
I don't know why watching to a ps output of dvips by using gv I get
orrible font. But when I try to print (using another computer, I have
not printer) the ps file is ok.
Should I install some fonts?
thanks,
alb
--
[EMAIL PROTECTED] mailing list
So they would coexist? It looks like it thinks that it will be
upgrading gconf from version 2.2.0 to 1.0.8-r5 which is clearly a
downgrade to me. Similar with gnome-vfs (upgraded from 2.2.4 to
1.0.5-r3). It would only put a D if it thinks it's a downgrade. In
this case, it thinks that
I can't log in to the admin account, no
way - no how. I've tried the zpasswd.py command/script.
This password should get you in at
http://yourhost:zopeport/manage
i.e. the root of the Zope server. Now you're logged in to Zope's
management interface. This is quite seperate from Plone. In this
Karl-Heinz Zimmer [EMAIL PROTECTED] writes:
I wonder if there might be an error on it: What is Thilosophy?
It is the branch of epistemology that answers the questions: What is
typing correctly and how do we know when we have done it? :)
--
[EMAIL PROTECTED] mailing list
On Thu, 7 Aug 2003 14:35:25 -0700
Balaji Srinivasan [EMAIL PROTECTED] wrote:
Hi Everyone
I synched up to the latest KDE etc on my gentoo system. Now everytime
i start konqueror (or most X apps), I get the following error.
WARNING: KDE detected X Error: BadDrawable (invalid Pixmap or Window
Am Don, 2003-08-07 um 11.21 schrieb Ole Langbehn:
(snip)
Please do not start a new thread by clicking on the Reply button of
your mail program. Your mail will not show up properly when using
threaded display, which is needed due to the high volume of messages to
this list. Instead, compose a new
I'll stick my hand up and say I was the person who installed gentoo for
this test. For those who made the previous posts (mostly crap, and who
dont seem to have read the article very well - though it could have been
more informative), perhaps a few facts may help:
1. was fully bootstrapped and
Hi *,
i have a problem while trying to print with CUPS from my gentoo
machine.
- i have installed net-print/cups.
- the printer is connected to a printserver (an SMC router), which
speaks the lpd protocoll, I can connect to this with telnet on port
515, and i can print from a windows
* Michael Schreckenbauer (2003-08-07 16:37 +0200)
Am Donnerstag, 7. August 2003 16:15 schrieb Thorsten Kampe:
I have a vcron job[1] that syncs the portage tree und afterward
fetches available updates - at least that's how it is supposed to
work. The sync works fine and the fetch, too, at least
Just noticed that this ebuild description doesn't look right:
* sys-apps/acl
Latest version available: 2.1.1-r1
Latest version installed: [ Not Installed ]
Size of downloaded files: 121 kB
Homepage:http://oss.sgi.com/projects/xfs
Description: XFS dump/restore
Ernie Schroder wrote:
On Saturday 09 August 2003 04:27 am, Dhruba Bandopadhyay wrote:
Tom Hosiawa wrote:
How do I get the mouse to work in virtual console?
Tom
--
[EMAIL PROTECTED] mailing list
You need to enable the gpm use flag and then re-emerge the packages
that use it. Also, you need to
I was told this CPU was an XP by my vendor. Why does it not say in the
model name that it is an XP see cat cpuinfo bellow.
It is currently running redhat and I would like to install Gentoo on it
but I am wondering which optimization flags I should use?
I was hoping
CHOST=i686-pc-linux-gnu
On Wednesday 13 August 2003 13:41, Patrick Marquetecken wrote:
Hi,
I'm placing this moment my /usr/portage on my home server
I have unmount my local /usr/portage, and dit a nfs mount as root.
valinor:/export/home/portage/usr/portage nfsnoauto,user,rw
Now after my first emerge
This question may very well open the path to scorn and derison, but
anyway: After upgrading glibc, should I recompile everything? (shudder)
Nothing at all? Some special packages? And how to find out which ones?
--
Jorge Almeida
--
[EMAIL PROTECTED] mailing list
Hmmm...so it doesn't take the SLOT into account when it's determining if
something is an upgrade or an install? I guess that's why it thinks it's
upgrading from 2.2.0 to 1.0.5-r3 but it's really a new install.
Hmmm...interesting. I'm going to try and do an install of one of the
dependency
Probably not, from a 1.1 (I think) installed system: Gentoo Base System
version 1.4.3.8p1
Same on an older version
BillK
On Mon, 2003-08-11 at 06:22, Chris I wrote:
On 2003.08.10 15:44, Peter Ruskin wrote:
Hmmm. Seems it's no longer supplied:
$ qpkg -f /etc/gentoo-release
[20:42
Hi,
I can use mozilla in one network, but not in another one.
In the new network mozilla freezes its window when I try too write in
some fields (like the url one) and I need to kill the process.
lynx and konquerror work in both networks,so I cannot undertand what is
appening.
any idea?
alb
On Friday 08 Aug 2003 11:46, raptor wrote:
how to see under which user i'm logged in...
i mean when I do su user and I have no intication on the prompt is
there way to see the user i'm logged... is this the correct one :
#echo $USER
whoami
--
I'm having trouble properly setting the time zone on gentoo. I currently
triple boot between WinXP, RH9 and Gentoo, the problem is my time on
gentoo shows up 4 hours earlier than in WinXP and RH9
I've already linked /etc/localtime to
/usr/share/zoneinfo/Canada/Eastern, and date on both Gentoo and
Hi all,
I'm using my laptop in two different networks, one use dhcp (dinamic
auto IP) and the other normal static IP. Is there any way to set network
parameters to select automaticaly the right network coinfiguration?
Could you suggest a solution for this problem? I don't know so much in
1 - 100 of 606 matches
Mail list logo
