On Sat, 13 Dec 2008 19:59:44 -0500, Willie Wong wrote:
Why not just a simple bash one-liner
for i in token{a..z}; do md5sum -c $i; done
What wrong with
md5sum -c token{a..z}
--
Neil Bothwick
All Scottish food is based on a dare.
signature.asc
Description: PGP signature
On Sunday 14 December 2008, Neil Bothwick wrote:
On Sat, 13 Dec 2008 19:59:44 -0500, Willie Wong wrote:
Why not just a simple bash one-liner
for i in token{a..z}; do md5sum -c $i; done
What wrong with
md5sum -c token{a..z}
Thank you all for your suggestions. I think think that:
Grant schrieb:
My desktop currently runs one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140
I'm pretty much out of space and I'm trying figure out the best way to
expand. The factors to consider are cost, capacity, speed, noise, and
heat.
So you don't care about
I've followed that link to creeate a Xvnc Terminal Server:
http://forums.gentoo.org/viewtopic-t-72893-postdays-0-postorder-asc-start-0.html
* My machines has no Diplay connected to it and mouse, but to test it
i use to connect a monitor so i can check everything works fine.
* Xdm works proprly
Dear all,
if anyone have idea or document material link about setup wccp on gentoo
kindly guide me,
Thanks
Suranga
On Sun, 14 Dec 2008 11:47:51 +0200, Alan McKinnon wrote:
That's why I suggested them :-) I use them a lot, especially when I
have to run the same set of commands on 15 different hosts, then I do
something like:
for I in $(seq 1 15) ; do
If you're using bash or zsh,you can speed this up
On Sunday 14 December 2008 12:47:14 Florian Philipp wrote:
Then I would use it (and the older disk) in an LVM volume group. LVM
also supports mirroring (like RAID1) and striping (like RAID0) on a
per-volume basis. That means that you could keep most of your data
somewhere on the TB disk and
On Sun, Dec 14, 2008 at 3:49 AM, Grant emailgr...@gmail.com wrote:
My desktop currently runs one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140
Out of space with 320G? Have you considered putting your multimedia in
an external hard drive?
Neil Bothwick writes:
On Sun, 14 Dec 2008 11:47:51 +0200, Alan McKinnon wrote:
for I in $(seq 1 15) ; do
If you're using bash or zsh,you can speed this up with
for I in {1..15}; do
You can even use C style: for (( i=1; i = 15; i++ )); do
Wonko
2008/12/14 James wirel...@tampabay.rr.com:
should have said profiler
Breaking down algorithms and make a fundamentally better
algo for a gpu, will require a really good profiler to
imho.
So far I'd be happy at being able to run something and leave the
evaluation of gains at a theoretical
Hi,
As a Canadian, I subscribe to a loyalty program called Airmiles. When I
go into the Airmiles site, it does not display properly in Firefox, even
though I have the Flash Player installed. I just emerged Opera and the
Air Miles site works just fine. Is this a bug with Firefox and should I
be
On Sunday 14 December 2008 17:17:15 CJoeB wrote:
Hi,
As a Canadian, I subscribe to a loyalty program called Airmiles. When I
go into the Airmiles site, it does not display properly in Firefox, even
though I have the Flash Player installed. I just emerged Opera and the
Air Miles site works
On Sun, Dec 14, 2008 at 9:25 AM, Alan McKinnon alan.mckin...@gmail.com wrote:
On Sunday 14 December 2008 17:17:15 CJoeB wrote:
Hi,
As a Canadian, I subscribe to a loyalty program called Airmiles. When I
go into the Airmiles site, it does not display properly in Firefox, even
though I have
My desktop currently runs one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140
I'm pretty much out of space and I'm trying figure out the best way to
expand. The factors to consider are cost, capacity, speed, noise, and
heat.
So you don't care about security,
Do I need to do anything for my system to take advantage of AMD's
Hyper-Transport on my 6000+ CPU?
- Grant
On 14 Dec 2008, at 02:49, Grant wrote:
My desktop currently runs one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140
I'm pretty much out of space and I'm trying figure out the best way to
expand. The factors to consider are cost, capacity, speed, noise, and
heat.
On 14 Dec 2008, at 16:31, Grant wrote:
...
A RAID won't cause more heat or noise than a second drive but it
will also
How much perceived noise does a second drive create?
See my other reply.
I'd say if you don't care about redundancy, you should go for a
single 1TB
disk. I'd prefer a
On Sonntag 14 Dezember 2008, Grant wrote:
Do I need to do anything for my system to take advantage of AMD's
Hyper-Transport on my 6000+ CPU?
- Grant
no, it should work even if you disable interrupts for hypertransport devices.
It doesn't harm turning it on.
My desktop currently runs one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140
I'm pretty much out of space and I'm trying figure out the best way to
expand. The factors to consider are cost, capacity, speed, noise, and
heat.
RAID 0 will be twice as fast as any
Do I need to do anything for my system to take advantage of AMD's
Hyper-Transport on my 6000+ CPU?
- Grant
no, it should work even if you disable interrupts for hypertransport devices.
It doesn't harm turning it on.
Great, thank you.
- Grant
Paul Hartman wrote:
On Sun, Dec 14, 2008 at 9:25 AM, Alan McKinnon alan.mckin...@gmail.com
wrote:
On Sunday 14 December 2008 17:17:15 CJoeB wrote:
Hi,
As a Canadian, I subscribe to a loyalty program called Airmiles. When I
go into the Airmiles site, it does not display properly
On Sun, Dec 14, 2008 at 4:52 PM, Grant emailgr...@gmail.com wrote:
My desktop currently runs one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140
Out of space with 320G? Have you considered putting your multimedia in
an external hard drive?
What would be the benefit
Grant wrote:
My desktop currently runs one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140
I'm pretty much out of space and I'm trying figure out the best way to
expand. The factors to consider are cost, capacity, speed, noise, and
heat.
RAID 0 will be
Hello,
I have followed this guide:
http://en.gentoo-wiki.com/wiki/RAID/NVRAID_with_dmraid and practically
everything is working. However, I want to make things better.
I have used genkernel (with a custom config) because it is very easy
to set up dmraid apparently. I am not happy with this
2008/12/13 Alan McKinnon alan.mckin...@gmail.com:
On Saturday 13 December 2008 23:09:58 Yannick Mortier wrote:
Hello!
I'm currently trying to install NetBeans 6.5 but it just doesn't work.
I always get a block when I try to to this.
[blocks B ] dev-java/ant-tasks (dev-java/ant-tasks is
Hi to all,
I'm setting up a new server for developing database-based applications.
So, I emerged PostgreSQL, but the problem comes when I try to
configure Postgre, this is what I get:
-
# emerge postgresql --config
Configuring pkg...
*
On Sun, 14 Dec 2008 09:36:35 -0800, Grant wrote:
This system
is in the living room and the current hard drive can be hea
Have you considered adding sound insultation to the case?
--
Neil Bothwick
I'm really easy to get along with once you people learn to worship me.
signature.asc
This system
is in the living room and the current hard drive can be hea
Have you considered adding sound insultation to the case?
That's not a bad idea, but I don't want to keep heat in along with
sound. The only fans are the CPU fan and power supply fan. My video
card blew a capacitor the
On Sun, 14 Dec 2008 20:10:26 +0200, Aram Havarneanu wrote:
I wonder why can't I statically compile dmraid support in the kernel
and not require an initrd file. Is that possible?
Yes,as long as /boot is on a RAID1 or non-RAID partition. I use the
former.
--
Neil Bothwick
Programming
On Sun, 14 Dec 2008 11:42:30 -0800, Grant wrote:
Have you considered adding sound insultation to the case?
That's not a bad idea, but I don't want to keep heat in along with
sound.
I wasn't suggesting putting the insulation over the air vents ;-)
--
Neil Bothwick
To err is human; to
I wouldn't mind personally :-)
2008/12/11 Rich Healey ri...@psych0tik.net
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Karl Huysmans wrote:
Hi All,
Don't know if it's appropriate to post this on this list, sorry if it's
not. Anyway, this is serious: we are currently looking for a
... using rsync.
Hello,
Finally I got a (less than perfect but) functional gentoo installation
and I would like to backup my root directory to an external
hard-drive. But I have a doubt regarding the options to be passed to
rsync. I think this command should perform what I want:
rsync -a
On Sonntag 14 Dezember 2008, Grant wrote:
This system
is in the living room and the current hard drive can be hea
Have you considered adding sound insultation to the case?
That's not a bad idea, but I don't want to keep heat in along with
sound. The only fans are the CPU fan and power
I'm attempting to upgrade my kernel from 2.6.25-gentoo-r7 to
2.6.27-gentoo-r5 and have run into a snag.
With the 2.6.25 kernel, the boot proces displays
...[stuff]...
Loading modules
... libata ...
... scsi_wait_scan ...
... ahci ...
... sg ...
... ehci-hcd ...
...
On Sonntag 14 Dezember 2008, David Relson wrote:
I'm attempting to upgrade my kernel from 2.6.25-gentoo-r7 to
2.6.27-gentoo-r5 and have run into a snag.
With the 2.6.25 kernel, the boot proces displays
...[stuff]...
Loading modules
... libata ...
... scsi_wait_scan ...
Neil Bothwick n...@digimed.co.uk wrote:
Yes,as long as /boot is on a RAID1 or non-RAID partition. I use the
former.
/boot is on RAID0. Works perfectly with dmraid compiled as module and
loaded into initrd. Do you say that it will not work statically
compiled into the kernel if /boot is on RAID0
On Sun, 14 Dec 2008 21:24:23 +0100, damian wrote:
rsync -a --delete --relative --exclude '/home' / /mnt/wd-backups/
That will also backup virtual filesystems like /proc, /dev and/sys. Add
the -x option to avoid this.
--
Neil Bothwick
I am Barney of Borg: I love you. You love me. We're
On Sun, Dec 14, 2008 at 10:09 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Sun, 14 Dec 2008 21:24:23 +0100, damian wrote:
rsync -a --delete --relative --exclude '/home' / /mnt/wd-backups/
That will also backup virtual filesystems like /proc, /dev and/sys. Add
the -x option to avoid
On Sun, 14 Dec 2008 23:06:21 +0200, Aram Havarneanu wrote:
Yes,as long as /boot is on a RAID1 or non-RAID partition. I use the
former.
/boot is on RAID0. Works perfectly with dmraid compiled as module and
loaded into initrd. Do you say that it will not work statically
compiled into the
On Sun, 14 Dec 2008 21:58:17 +0100
Volker Armin Hemmann wrote:
On Sonntag 14 Dezember 2008, David Relson wrote:
I'm attempting to upgrade my kernel from 2.6.25-gentoo-r7 to
2.6.27-gentoo-r5 and have run into a snag.
With the 2.6.25 kernel, the boot proces displays
...[stuff]...
On Sonntag 14 Dezember 2008, Aram Havarneanu wrote:
Hello,
I have followed this guide:
http://en.gentoo-wiki.com/wiki/RAID/NVRAID_with_dmraid and practically
everything is working. However, I want to make things better.
I have used genkernel (with a custom config) because it is very easy
Volker Armin Hemmann volker.armin.hemm...@tu-clausthal.de wrote:
is there any good reason to use dmraid and not md raid?
Yes. The RAID array was created long time ago and I need to keep the
data. I don't have ~1TB to store it somewhere else, bring the array
offline and use md raid.
--
Aram
On Sonntag 14 Dezember 2008, David Relson wrote:
On Sun, 14 Dec 2008 21:58:17 +0100
Volker Armin Hemmann wrote:
On Sonntag 14 Dezember 2008, David Relson wrote:
I'm attempting to upgrade my kernel from 2.6.25-gentoo-r7 to
2.6.27-gentoo-r5 and have run into a snag.
With the 2.6.25
Volker Armin Hemmann wrote:
On Sonntag 14 Dezember 2008, Grant wrote:
This system
is in the living room and the current hard drive can be hea
Have you considered adding sound insultation to the case?
That's not a bad idea, but I don't want to keep heat in along with
On Sun, 14 Dec 2008 22:11:28 +0100, damian wrote:
That will also backup virtual filesystems like /proc, /dev and/sys.
Add the -x option to avoid this.
OK, so the command should be
rsync -ax --delete --relative --exclude '/home' / /mnt/wd-backups/
?
Yes, unless /home is on a
On Sun, 14 Dec 2008 22:47:22 +0100
Volker Armin Hemmann volker.armin.hemm...@tu-clausthal.de wrote:
On Sonntag 14 Dezember 2008, David Relson wrote:
On Sun, 14 Dec 2008 21:58:17 +0100
Volker Armin Hemmann wrote:
On Sonntag 14 Dezember 2008, David Relson wrote:
I'm attempting to
on 12/14/2008 11:11 PM damian wrote the following:
On Sun, Dec 14, 2008 at 10:09 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Sun, 14 Dec 2008 21:24:23 +0100, damian wrote:
rsync -a --delete --relative --exclude '/home' / /mnt/wd-backups/
That will also backup virtual
My desktop currently runs one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140
I'm pretty much out of space and I'm trying figure out the best way to
expand. The factors to consider are cost, capacity, speed, noise, and
heat.
RAID 0 will be twice as fast as any
On another system which must be about 10 years old, I'd like to
replace the IDE hard drive with a high capacity drive. High-capacity
IDE drives are pretty much non-existent on newegg.com, but I'd like to
find one around 500GB. Is moving that system over to the new drive as
simple as
On Sun, Dec 14, 2008 at 4:32 PM, Grant emailgr...@gmail.com wrote:
My desktop currently runs one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140
I'm pretty much out of space and I'm trying figure out the best way to
expand. The factors to consider are cost,
Thanks,
That only adds more questions.
My environment is amd64. It appears to have downloaded the i586 binary.
Surely this is incorrect?
my make.conf file contains the line
CFLAGS=-O2 -pipe -march=athlon-xp, which should trigger the 64 bit binaries
to be downloaded and acted upon.
The
Progress:
I've discovered that athlon64 is a valid gcc make flag, so I changed it back.
I've also discovered that the /etc/make.profile symlink was pointing at the
x86 default-linux profile set, not the amd64 profile.
I'm attempting a recompile now with the symlink changed, and hopefully this
It looks like fixing the /etc/make.profile symlink fixed my problem.
I'm still a little nervous about whether I need to run any other commands in
order to prevent my system going wrong after making this correction.
Jeff
On Sunday 14 December 2008 09:48:47 pm Jeff Cranmer wrote:
Progress:
Jeff Cranmer wrote:
It looks like fixing the /etc/make.profile symlink fixed my problem.
I'm still a little nervous about whether I need to run any other commands in
order to prevent my system going wrong after making this correction.
Jeff
Let me see if I understand correctly. You
Hi Damian,
by the way rsnapshot is a more sophisticated tool to back up your root
file system. it is based on rsync, but the bright idea behind is that it
creates a history (hourly, daily, weekly, monthly) with copying the hole
system only one time.
Maybe this is what you preferably want.
Kind
on 12/15/2008 02:32 AM Grant wrote the following:
On another system which must be about 10 years old, I'd like to
replace the IDE hard drive with a high capacity drive. High-capacity
IDE drives are pretty much non-existent on newegg.com, but I'd like to
find one around 500GB. Is moving that
56 matches
Mail list logo
