On Sunday 27 August 2006 00:37, Samuel Baldwin wrote:
For last year or so, I've been using Gmail with Firefox, all in browser,
and have wanted to move to a local email client (using Thunderbird or
Sylpheed-Claws).
Unfortunately, the only time I have had any success with this was with the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Mick wrote:
On Sunday 27 August 2006 00:37, Samuel Baldwin wrote:
For last year or so, I've been using Gmail with Firefox, all in browser,
and have wanted to move to a local email client (using Thunderbird or
Sylpheed-Claws).
Unfortunately, the
You are missing semi-colons after each record...
Also you might want to just make a dummy domain on a test dns - see if it
works.
On Wed, 23 Aug 2006, Michael Crute wrote:
I am trying to write a scrip to maintain my Bind zone files and I was
wondering if it is valid to cram the SOA all onto
It is most likely a problem with your own build enviroment or bad use
flags. Post the errors you are having to this group so we can see the
build problems.
Before you do that, try running repdev-rebuild.
On Sat, 26 Aug 2006, Martin S wrote:
I seem to find lots of bad repository servers when
If you are worried about the users getting the ldap bind password - then
why on earth would you bother with NIS? NIS has no password to block
binding at all! At least ldap has a binding password...
On Tue, 22 Aug 2006, Leandro Melo de Sales wrote:
Hi!
I configured my gentoo server box to
Hi there,
it´s my first time writing to a mailinglist, so excuse me if this email
doesn´t have the correct format ...
I´d like to create my own thin client - like Gentoo. After booting, it
should just have a few processes running, like logging, Xserver, getty, ...
Well, it´s not the problem
Hi Bryan,
Tks for your advice.
Why not just use rsync?
setup cron to just sync the two directories (/home/blah with
/mnt/disk/blah) over and over?
Such an arrangement will only sync /home/user on
/mnt/usb_enclosure/user at fixed time, periodically, not instaneously
whenever there is a
Since a few weeks dmraid is hard masked (before it was only testing). The
changelog does not really tell why this change has happened. I have some
hosts using the dmraid package as they are using the onboard Promise
controllers in raid-mode. What are there for alternatives to the dmraid
On Sun, 27 Aug 2006 16:55:17 +0800 (CST), Stephen Liu wrote:
setup cron to just sync the two directories (/home/blah with
/mnt/disk/blah) over and over?
Such an arrangement will only sync /home/user on
/mnt/usb_enclosure/user at fixed time, periodically, not instaneously
whenever
On Sat, 26 Aug 2006 20:04:12 -0700, Grant wrote:
gxine plays 2 out of 4 of the DVDs every time. mplayer doesn't output
anything when started from a terminal except the following which pops
up right away, before a DVD is put in:
How do you run mplayer from a terminal with no DVD in thr drive,
Hi Neil,
Do you really need such frequent syncing? Bear in mind the limited
write
lifespan of flash memory, if you have a file in your home directory
that
is frequently updated, you could wear out the memory in a short time.
what's wrong with using a script that syncs your hard disk with
On Sunday 27 August 2006 12:20, Stephen Liu wrote:
Mounted inside the USB enclosure is a HD. I'll use old HD for this
purpose. Frequently I work on at least 2 PCs running different Linux
OS. With such a device, USB enclosure, it'll ease my work on
consolidating the working data on 2 PCs.
Hi Etaoin,
Tks for your advice.
If you have networking, why not set up a network share of some kind
(nfs,
smb, or even ssh via shfs) and mount it (under the same path) from
each
computer you work on? This avoid having to replicate data and, with
decent network speed, is nearly as fast
On Sunday 27 August 2006 13:39, Stephen Liu wrote:
The PCs, a workstation only, are not connected to network. Neither
I'll run 2/3 PCs simultaneously.
Ok, I didn't have this info.
Previously I did it in this way making use of an addtional network
card connecting 2 PCs. Later I ceased
Several days ago I noticed that in the Konsole man pages and
nano --boldtext no longer produce bold letters. When using a light
background (for example the Schema Black on White), the words
NAME and SYNOPSIS and so on on a man page are no longer in bold
letters but the same as all the other
Hi folks,
does anyone have some tool for mediawiki mass installations,
which does an completely automatic (non-interactive) mediawiki
installation from some configfile ?
It also would be fine, if this tool could move the non-individual
parts (ie. program code, stylesheets, ...) to some common
On Sun, 27 Aug 2006 11:30:16 +0200, Dan Johansson wrote:
Since a few weeks dmraid is hard masked (before it was only testing).
The changelog does not really tell why this change has happened.
Hard masking is done by listing the package in
/usr/portage/profiles/package.mask, along with a
Hi Neil,
but I still don't
see
why you need real-time mirroring. A script to sync the drive before
unmounting would give you an accurate mirror. A cron script to check
if
the drive is mounted and sync it every hour would cut down on the
amount
of data to sync when unmounting.
If running
Does your kernel have the real time clock feature turned on? There are
several ...RTC... settings in my kernel.
Do you know where those features are in the menuconfig? I can get so
lost in there.
- Grant
--
gentoo-user@gentoo.org mailing list
On Sunday 27 August 2006 16:09, Samuel Baldwin wrote:
Well, I'll see if there aren't any settings I need to muck around with. A
15 minute delay is pretty bad, as I need most of my email to be in my inbox
pronto.
I am not entirely sure as I haven't used Thunderbird for the last 9 months but
I
No, it does work. I hgave one machine with Fedora's grub in the
MBR. One choice it had was to jump to grub in a partition so you got a
second set of boot options based on what hot-plug drive was installed.
It worked fine.
I did my first test of trying to use the NTLDR. It did attempt to
List,Hey, I have a small problem installing cdrtools through portage: Source compiled. Test phase [not enabled]: app-cdr/cdrtools-2.01.01_alpha11 Install cdrtools-2.01.01_alpha11
into /var/tmp/portage/cdrtools-2.01.01_alpha11/image/ category app-cdr!!! dobin: cdda2wav/OBJ/*-*-cc/cdda2wav does not
El Domingo, 27 de Agosto de 2006 01:37, Samuel Baldwin escribió:
For last year or so, I've been using Gmail with Firefox, all in browser,
and have wanted to move to a local email client (using Thunderbird or
Sylpheed-Claws).
Unfortunately, the only time I have had any success with this was
On Sun, 27 Aug 2006 10:56:12 -0400, 7v5w7go9ub0o [EMAIL PROTECTED]
wrote:
No, it does work. I hgave one machine with Fedora's grub in the
MBR. One choice it had was to jump to grub in a partition so you got a
second set of boot options based on what hot-plug drive was installed.
It
On Sun, 27 Aug 2006 22:14:25 +0800 (CST), Stephen Liu wrote:
but I still don't
see
why you need real-time mirroring. A script to sync the drive before
unmounting would give you an accurate mirror. A cron script to check
if
the drive is mounted and sync it every hour would cut down on
060827 Benno Schulenberg wrote:
in the Konsole man pages no longer produce bold letters.
When using eg the Schema Black on White, the words NAME and SYNOPSIS
are no longer in bold letters but the same as all the other text.
Only when using eg Green Tint those words still stand out.
In an
Hi Neil,
Shutdown involves unmounting the drive, and I recommended syncing
before unmounting.
The USB enclosure will be automatically mounted/umounted.
Whether on the script includes syncing once before poweroff/reboot
starts.
Where can I find similar syncing and cron script examples? TIA
Hi folks,
I'm currently looking through the patches against httpd-2.2.3
and like to get some explanation. Can anyone give me some pointer ?
cu
--
-
Enrico Weigelt== metux IT service - http://www.metux.de/
On Sunday 27 August 2006 15:06, Enrico Weigelt wrote:
Hi folks,
does anyone have some tool for mediawiki mass installations,
which does an completely automatic (non-interactive) mediawiki
installation from some configfile ?
It also would be fine, if this tool could move the non-individual
On 8/27/06, Grant [EMAIL PROTECTED] wrote:
Does your kernel have the real time clock feature turned on? There are
several ...RTC... settings in my kernel.
Do you know where those features are in the menuconfig? I can get so
lost in there.
Sorry, my gentoo system is in reconstruction, and
Grant wrote:
Do you know where those features are in the menuconfig? I can get so
lost in there.
- Grant
Device Drivers Character devices * Enhanced Real Time Clock Support
--
Best regards,
Daniel
--
gentoo-user@gentoo.org mailing list
Hello all,
I've run into a build error with OpenOffice.org 2.0.3 regardless of USE. The
command checkdll.sh claims that there is no symbol deglate in
libpython2.4.so.1.0, but there is:
$ readelf -s /usr/lib/libpython2.4.so.1.0 | grep deflate
58: 0 NOTYPE
dear all,
I'm using gentoo with the option ACCEPT_KEYWORDS=~x86 in make.conf file.
For 5 days, I've had some problem when I run revdep-rebuild.
It seems that I've some librairies missing as the result is :
broken /usr/bin/qtwengophone (requires liblzo.so.1)
broken
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Bryan Whitehead wrote:
It is most likely a problem with your own build enviroment or bad use
flags. Post the errors you are having to this group so we can see the
build problems.
Before you do that, try running repdev-rebuild.
I don't know if
Remy Blank wrote:
Try:
RC_PLUG_SERVICES=!net.*
in /etc/conf.d/rc. Your net.eth0 is probably started as a result of a
hotplug event, and the line above will prevent this.
Thanks, that seemed to work nicely!
Randy
--
gentoo-user@gentoo.org mailing list
On Sunday 27 August 2006 18:08, PaulNM wrote:
Mick wrote:
Yes. You may also remove the linux boot image file C:\bootsect.lnx. The
only drawback is that if he keeps Gentoo and ends up using it regularly,
then every time you/he compile a new kernel you will need to repeat the
exercise.
Can someone refresh my memory?
I'm trying to mount usb memory stick with permission 600 but it is not
taking devmode=0600
The current command mounts it as 755
/dev/sda1 /mnt/camera auto
noauto,rw,users,exec
I've tried:
/dev/sda1 /mnt/camera auto
On Sunday 27 August 2006 15:09, Samuel Baldwin wrote:
As for KMail, Mick, that was the worst of all my experiences. It wasn't
just messy it was completely b0rked. It would repeatedly grab the same
emails (with the get all in inbox off), adding about 3 or 4 every time.
At that rate it would
On Sunday 27 August 2006 20:08, Xavier MOGHRABI wrote:
dear all,
I'm using gentoo with the option ACCEPT_KEYWORDS=~x86 in make.conf file.
For 5 days, I've had some problem when I run revdep-rebuild.
It seems that I've some librairies missing as the result is :
broken /usr/bin/qtwengophone
On Sunday 27 August 2006 20:55, Joseph wrote:
Can someone refresh my memory?
I'm trying to mount usb memory stick with permission 600 but it is not
taking devmode=0600
The current command mounts it as 755
/dev/sda1 /mnt/camera auto
noauto,rw,users,exec
I've tried:
On 8/27/06, Grant [EMAIL PROTECTED] wrote:
gxine plays 2 out of 4 of the DVDs every time. mplayer doesn't output
anything when started from a terminal except the following which pops
up right away, before a DVD is put in:
How do you run mplayer from a terminal with no DVD in thr drive,
On Sunday 27 August 2006 00:54, Mick wrote:
On Sunday 27 August 2006 00:37, Samuel Baldwin wrote:
For last year or so, I've been using Gmail with Firefox, all in
browser, and have wanted to move to a local email client (using
Thunderbird or Sylpheed-Claws).
Unfortunately, the only time I
Do you know where those features are in the menuconfig? I can get so
lost in there.
- Grant
Device Drivers Character devices * Enhanced Real Time Clock Support
Thanks, I just set up my laptop, desktop, and server with it.
- Grant
--
gentoo-user@gentoo.org mailing list
gxine plays 2 out of 4 of the DVDs every time. mplayer doesn't output
anything when started from a terminal except the following which pops
up right away, before a DVD is put in:
How do you run mplayer from a terminal with no DVD in thr drive, or are
you running gmplayer. Try
On Sun, Aug 27, 2006 at 12:55:11PM -0600, Penguin Lover Joseph squawked:
Can someone refresh my memory?
I'm trying to mount usb memory stick with permission 600 but it is not
taking devmode=0600
The current command mounts it as 755
/dev/sda1 /mnt/camera auto
On Sun, 27 Aug 2006 13:22:11 -0700, Grant wrote:
It's a Dell laptop that's a couple years old. I don't like gmplayer
either. Is there any other way to use mplayer separate from the
command line to play DVDs?
See the listing of front ends at
http://www.mplayerhq.hu/design3/projects.html
On Sun, 2006-08-27 at 16:53 -0400, Willie Wong wrote:
On Sun, Aug 27, 2006 at 12:55:11PM -0600, Penguin Lover Joseph squawked:
Can someone refresh my memory?
I'm trying to mount usb memory stick with permission 600 but it is not
taking devmode=0600
The current command mounts it as 755
Bryan Whitehead wrote:
You are missing semi-colons after each record...
Also you might want to just make a dummy domain on a test dns - see if
it works.
On Wed, 23 Aug 2006, Michael Crute wrote:
I am trying to write a scrip to maintain my Bind zone files and I was
wondering if it is valid
It is a usb stick so it has a vfat file system. However, I've reformat
the stick with fdisk to ext2 filesystem. With vfat it has 978mb
capacity now after formating is to ext2 it has a 913mb capacity.
Is there a way to create dos (vfat) partition with Linux fdisk utility?
As far as i know
On 8/27/06, Jason Weisberger [EMAIL PROTECTED] wrote:
List,
Hey, I have a small problem installing cdrtools through portage:
Please post the outputs of emerge -pv cdrtools and emerge --info.
-Richard
--
gentoo-user@gentoo.org mailing list
On 8/27/06, Joseph [EMAIL PROTECTED] wrote:
Yes, that is what I want it to do.
Originally my 1Mb stick with dos partition had 978Mb on it.
I've partitioned it to Linux partition and formated as ext2, the free
disk space went down to 913Mb
Try tune2fs -m 0 to set the reserved block percentage
On 8/23/06, Michael Crute [EMAIL PROTECTED] wrote:
I am trying to write a scrip to maintain my Bind zone files and I was
wondering if it is valid to cram the SOA all onto one line. I have
scoured the internet and can't find anyone who does it that way. My
question is... will it break stuff?
On 8/27/06, Neil Hodges [EMAIL PROTECTED] wrote:
Hello all,
I've run into a build error with OpenOffice.org 2.0.3 regardless of USE. The command
checkdll.sh claims that there is no symbol deglate in libpython2.4.so.1.0,
but there is:
$ readelf -s
On 8/27/06, Enrico Weigelt [EMAIL PROTECTED] wrote:
Hi folks,
I'm currently looking through the patches against httpd-2.2.3
and like to get some explanation. Can anyone give me some pointer ?
Huh? httpd resolves to app-emacs/httpd, and there is only 1.1 in
the tree. Oh, wait, you mean
Hello again,
These are all libpython is linked against:
linux-gate.so.1 = (0xe000)
libpthread.so.0 = /lib/libpthread.so.0 (0xb7e7f000)
libdl.so.2 = /lib/libdl.so.2 (0xb7e7b000)
libutil.so.1 = /lib/libutil.so.1 (0xb7e77000)
libm.so.6 = /lib/libm.so.6 (0xb7e52000)
libc.so.6 =
On Sunday 27 August 2006 23:59, Joseph wrote:
Harm Geerts is right (thanks) umask=0077 does what I need with dos
partition, when mounted, usb stick has a permission 700.
What would be an alternative for ext2 file system, umask doesn't work.
I might be wrong but I'm guessing you want different
On Mon, 2006-08-28 at 01:23 +0200, Harm Geerts wrote:
On Sunday 27 August 2006 23:59, Joseph wrote:
Harm Geerts is right (thanks) umask=0077 does what I need with dos
partition, when mounted, usb stick has a permission 700.
What would be an alternative for ext2 file system, umask doesn't
On 8/27/06, Neil Hodges [EMAIL PROTECTED] wrote:
Hello again,
These are all libpython is linked against:
linux-gate.so.1 = (0xe000)
libpthread.so.0 = /lib/libpthread.so.0 (0xb7e7f000)
libdl.so.2 = /lib/libdl.so.2 (0xb7e7b000)
libutil.so.1 = /lib/libutil.so.1 (0xb7e77000)
On 8/27/06, Grant [EMAIL PROTECTED] wrote:
It's a Dell laptop that's a couple years old. I don't like gmplayer
either. Is there any other way to use mplayer separate from the
command line to play DVDs?
See the listing of front ends at
http://www.mplayerhq.hu/design3/projects.html
I
On Sun, 27 Aug 2006 19:35:41 -0600
Collins Richey wrote:
On 8/27/06, Grant [EMAIL PROTECTED] wrote:
It's a Dell laptop that's a couple years old. I don't like gmplayer
either. Is there any other way to use mplayer separate from the
command line to play DVDs?
See the listing
I set up my network to use distcc earlier this afternoon following the
Gentoo guide. I'm not sure it's working though. I've been emerging
stuff on all three machines all afternoon, but when I run the
distccmon-gui application, nothing is listed. Should it be? What am I
doing wrong?
--
did you follow the advice that flashes past at the end of the ebuild
(too fast to read) that says to run the monitor as follows:
DISTCC_DIR=/var/tmp/portage/.distcc distccmon-gnome
or
DISTCC_DIR=/var/tmp/portage/.distcc distccmon-text N
another way to tell is by setting a log file then tail -f
Sorry I didn't get back earlier.
Umm, all config files really. There are very few that this does not
happen with.
On 8/24/06, Robert Welz [EMAIL PROTECTED] wrote:
Trenton Adams wrote:
Hi guys,
Has anyone else noticed that dispatch-conf does not auto-merge
properly all the time? I get
Note: forwarded message attached. Send instant messages to your online friends http://uk.messenger.yahoo.com ---BeginMessage---
Hi, I have installed openldap on my gentoo-linux . My purpose is to use LDAP server for login authentication using PAM. slapd is running fine. ldapsearch command is also
2006/8/27, gentuxx [EMAIL PROTECTED]:
-BEGIN PGP SIGNED MESSAGE-Hash: SHA1Bryan Whitehead wrote: It is most likely a problem with your own build enviroment or bad use flags. Post the errors you are having to this group so we can see the
build problems. Before you do that, try running
On Mon, 2006-08-28 at 16:05 +1200, Nick Rout wrote:
did you follow the advice that flashes past at the end of the ebuild
(too fast to read) that says to run the monitor as follows:
DISTCC_DIR=/var/tmp/portage/.distcc distccmon-gnome
or
DISTCC_DIR=/var/tmp/portage/.distcc distccmon-text N
On Sun, 27 Aug 2006 23:26:57 +0800 (CST)
Stephen Liu [EMAIL PROTECTED] wrote:
Hi Neil,
Shutdown involves unmounting the drive, and I recommended syncing
before unmounting.
The USB enclosure will be automatically mounted/umounted.
Whether on the script includes syncing once before
67 matches
Mail list logo