On Wednesday 07 February 2007 01:20, Dave Oxley wrote:
I have a Gentoo server that is running Cisco VPN software to connect to
my companies VPN. I have setup the server as a NAT for the specific
subnet required for the VPN and the rest of my traffic goes through my
router (192.168.1.1). I
Hi,
i would like to use an x1300 video card with the radeon opensource
video driver. Is it supported (at least for the 2d part)?
Regards,
m
--
gentoo-user@gentoo.org mailing list
Hi,
Am Mittwoch, 7. Februar 2007 04:49 schrieb Norberto Bensa:
Hemmann, Volker Armin wrote:
On Dienstag, 6. Februar 2007, Michael Schreckenbauer wrote:
I don't think, swap is the cause of this. This system has 1,5GB Ram,
swap is nearly never touched :)
swap was only an example.
Hello,
I have a tablet which is supposed to work with acecad driver. To be
specific - it is Pentagram Quadpen tablet which seems to be simply
rebranded acecad tablet (windows drivers come from acecad directly).
I was able to (sort of) run the tablet but when I move the stylus
over the
Hi all,
I have a quick question about my init scripts.
I start my wireless network with the script
/etc/init.d/net.eth2
which is started by init in the default runlevel.
I also have
/etc/init.d/netmount
to mount some samba shares, and which is also started my init in the default
runlevel,
Hemmann, Volker Armin wrote:
hdparm /dev/hda
/dev/hda:
multcount= 16 (on)
IO_support = 1 (32-bit)
unmaskirq= 1 (on)
using_dma= 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead= 256 (on)
geometry = 16383/255/63, sectors = 234493056, start
Hi,
Am Mittwoch, 7. Februar 2007 12:35 schrieb Benno Schulenberg:
Hemmann, Volker Armin wrote:
hdparm /dev/hda
/dev/hda:
multcount= 16 (on)
IO_support = 1 (32-bit)
unmaskirq= 1 (on)
using_dma= 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
What I/O scheduler are you using? Did you try to experiment with the
deadline or the cfq I/O schedulers?
If you have them enabled in your kernel config, read
Documentation/block/switching-sched.txt and see if things get better
after changing the I/O scheduler for your hard disk.
Of course, your
Daniel Pielmeier wrote:
What I/O scheduler are you using? Did you try to experiment with the
deadline or the cfq I/O schedulers?
If you have them enabled in your kernel config, read
Documentation/block/switching-sched.txt and see if things get better
after changing the I/O scheduler for your
The hdparm optimizations, the CFQ scheduler and maybe low latency
desktop in the kernel are the best way to make your desktop useable
under heavy disk usage.These are my hdparm settings:
[snip]
Thanks for your suggestions. As i have an SATA harddisk, can i use
hdparm with it , i thought it
Hello, list --
I've been a happy claws user for a few years. I use postfix, because I like
overkill, I suppose. I've barely touched the postfix config, so here's to
the developers. ;-)
Anyway, what I don't understand is the maildir, MH, mbox, qmail delivery
thing. I followed a wiki[1] which
Radosław Grzanka napisał(a):
Hello,
I have a tablet which is supposed to work with acecad driver. To be
specific - it is Pentagram Quadpen tablet which seems to be simply
rebranded acecad tablet (windows drivers come from acecad directly).
I was able to (sort of) run the tablet but when
Mike wrote:
Daniel Pielmeier wrote:
No other suggestions?
The hdparm optimizations, the CFQ scheduler and maybe low latency
desktop in the kernel are the best way to make your desktop
useable under heavy disk usage.
And check you have HZ set to 1000.
$ grep HZ /usr/src/linux/.config
#
On Wed, 7 Feb 2007 09:40:59 -0800, Michael Higgins wrote:
Anyway, what I don't understand is the maildir, MH, mbox, qmail delivery
thing. I followed a wiki[1] which suggests I need to use rcvstore
command in a .forward file, etc. and to set up my delivery using nmh if
I'm a sylpheed user.
On 2/7/07, Daniel Pielmeier [EMAIL PROTECTED] wrote:
No other suggestions?
--
gentoo-user@gentoo.org mailing list
Could your problem be similar to this:
http://marc.theaimsgroup.com/?l=gentoo-userm=114252338111258w=2
Tom
On Mittwoch, 7. Februar 2007, Michael Schreckenbauer wrote:
Hi,
Am Mittwoch, 7. Februar 2007 12:35 schrieb Benno Schulenberg:
Hemmann, Volker Armin wrote:
hdparm /dev/hda
/dev/hda:
multcount= 16 (on)
IO_support = 1 (32-bit)
unmaskirq= 1 (on)
using_dma=
-Original Message-
From: Neil Bothwick [mailto:[EMAIL PROTECTED]
On Wed, 7 Feb 2007 09:40:59 -0800, Michael Higgins wrote:
Anyway, what I don't understand is the maildir, MH, mbox, qmail
delivery thing. I followed a wiki[1] which suggests I need to use
rcvstore command in a
The hdparm optimizations, the CFQ scheduler and maybe low latency
desktop in the kernel are the best way to make your desktop useable
under heavy disk usage.These are my hdparm settings:
/dev/hda:
multcount= 16 (on)
IO_support = 1 (32-bit)
unmaskirq= 1 (on)
using_dma=
Hi,
my vmware doesn't work anymore :-(
I have no clue about the cause - maybe my update to 2.6.20 or perhaps bus?
# vmware
/opt/vmware/workstation/lib/bin/vmware:
/opt/vmware/workstation/lib/lib/libpng12.so.0/libpng12.so.0: no version
information available (required by /usr/lib/libcairo.so.2)
Sven Köhler schrieb:
Hi,
my vmware doesn't work anymore :-(
I have no clue about the cause - maybe my update to 2.6.20 or perhaps bus?
# vmware
/opt/vmware/workstation/lib/bin/vmware:
/opt/vmware/workstation/lib/lib/libpng12.so.0/libpng12.so.0: no version
information available
Hi,
When I try to compile latest splashutils, I have folowing error:
=
[ebuild N]media-gfx/splashutils-1.1.9.10-r1 USE=png
truetype -hardened -kdgraphics
...
...
Source unpacked.
Compiling source in
...
In file included from
Konstantin S. Budylov schrieb:
Hi,
When I try to compile latest splashutils, I have folowing error:
=
[ebuild N]media-gfx/splashutils-1.1.9.10-r1 USE=png
truetype -hardened -kdgraphics
...
...
Source unpacked.
Compiling source in
Honestly, I really don't see how they're even remotely related. So either
I'm just dense, or the maintainer is not understanding my request... It's
extremely frustrating.
[Bug 165709] When viewing emerge -avu world show which packages are stable
(or ~x86)
Daevid Vincent wrote:
Honestly, I really don't see how they're even remotely related.
So either I'm just dense, or the maintainer is not understanding
my request... It's extremely frustrating.
Yes, the bug wrangler looks a bit overworked sometimes. :| Those
bugs don't seem duplicates to me
On Wed, 2007-02-07 at 10:37 +, Peter Lewis wrote:
Hi all,
I have a quick question about my init scripts.
I start my wireless network with the script
/etc/init.d/net.eth2
which is started by init in the default runlevel.
I also have
/etc/init.d/netmount
to mount some samba
No body knows how to fix this problem?
This same problem happen with Gnome and weather Monitor Applet.
Some one an help please?
Sigfrido
[EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] wrote:
Sigfrido V. Ortiz C. a gentiment tapote:
Hi folks,
Due to I have read here nice comment about XFCE4
On Wednesday 07 February 2007 23:19:53 Daevid Vincent wrote:
Honestly, I really don't see how they're even remotely related. So either
I'm just dense, or the maintainer is not understanding my request... It's
extremely frustrating.
[Bug 165709] When viewing emerge -avu world show which
On Wednesday 07 February 2007 23:19:53 Daevid Vincent wrote:
Honestly, I really don't see how they're even remotely
related. So either
I'm just dense, or the maintainer is not understanding my
request... It's
extremely frustrating.
[Bug 165709] When viewing emerge -avu world show
On Thursday 08 February 2007 00:59:49 Daevid Vincent wrote:
So... it will be a lot easier for me to tell you what your
options are wrt.
working around this bug if you post the output of:
# emerge -Dup world --tree --verbose
Thanks, but I don't have a bug to solve here. Just the feature
Hi all,
I'm trying to use:
_syscall3(int, ioprio_set, int, which, int, who, int, ioprio);
_syscall2(int, ioprio_get, int, which, int, who);
and supposedly I just
#include linux/unistd.h
but I'm getting these error from gcc:
error: syntax error before ioprio_set
warning: data definition has
I used to (briefly) get notices from ebuilds when I emerged them.
Somewhere along
the line that stopped, and I have forgotten where it was configured.
Anybody got a quick hint?
--
Kevin O'Gorman, PhD
--
gentoo-user@gentoo.org mailing list
Yes, but then I have to manually, one at a time search eix
and compare to
the output of 'emerge world'. I use eix. That's actually
why I suspect that
the feature could be implemented fairly easily. Portage has
all the info it needs.
You do know that eix is not related to portage in
On Thursday 08 February 2007 01:58:57 Kevin O'Gorman wrote:
I used to (briefly) get notices from ebuilds when I emerged them.
Somewhere along
the line that stopped, and I have forgotten where it was configured.
Anybody got a quick hint?
On Thursday 08 February 2007 02:13:10 Daevid Vincent wrote:
Anyway, can you explain to me how this feature would help you at all. I
really don't understand the use case for it.
Only because you asked... And the short answer is [...]
[SNIP]
Hmm.. I guess that does make sense then. As you've
This makes (at least) two of us (me and the OP) who don't understand the
relation between the request for indication if portage wants to install
a stable or testing package and the bug where in some cases portage
misses that some dependencies are already provided. The feature the OP
requests would
On Thursday 08 February 2007, Daevid Vincent wrote:
I run a mixed environment of stable and testing -- as do most people. Often
I run a testing (~x86) package b/c I need a feature that isn't available
in the stable version. I would prefer to be all stable, but life is not so
kind in the land
Adrian wrote:
Greetings;
I just upgraded Open Office from 2.0.3 to 2.0.4 (yes, I'm behind).
Now, I can't use any of the fonts other than the ones which come with
Open Office. All my existing fonts which I added were being substituted
with other fonts.
Have you tried deleting
On Thu, Feb 08, 2007 at 10:23:09AM +0930, Iain Buchanan wrote:
Hi all,
I'm trying to use:
_syscall3(int, ioprio_set, int, which, int, who, int, ioprio);
_syscall2(int, ioprio_get, int, which, int, who);
and supposedly I just
#include linux/unistd.h
but I'm getting these error from
On Thu, 2007-02-08 at 16:10 +1100, Christian Marie wrote:
On Thu, Feb 08, 2007 at 10:23:09AM +0930, Iain Buchanan wrote:
Hi all,
I'm trying to use:
_syscall3(int, ioprio_set, int, which, int, who, int, ioprio);
_syscall2(int, ioprio_get, int, which, int, who);
and supposedly I
39 matches
Mail list logo