Re: [gentoo-user] Foss hardened router?

On 06/09/2016 12:37 PM, Andrew Savchenko wrote: On Thu, 9 Jun 2016 13:55:41 + (UTC) James wrote: Hello, Ideally, there would be a gentoo-based hardened router for sale somewhere, where I could merely configure iptables and add a few extra codes? But, I cannot seem to be able to locate

[gentoo-user] firewall -> kernel hardlock error

Getting an error with kernel 4.1.28 ( USE="experimental symlink" ) The firewall ( 2 different packages tried ) locks up the machine during boot. The old kernel ( 4.1.27 ) worked with no errors. I copied the /usr/src/linux/.config file over from kernel 4.1.27. Used "make menuconfig" to check if

Re: [gentoo-user] [OT?]: CH340 working/not working with ESP286 Node MCU

On 07/07/2016 10:22 PM, meino.cra...@gmx.de wrote: Hi, I have bought an ESP8266 Lua NodeMCU board, which has an FTDI-like chip on board to map USB to serial and vice versa. It is an CH340 one. There is an according module in the driver (compiled and - to get shure - loaded by hand). When I

Re: [gentoo-user] bash-completion question(s)

On 02/02/2017 01:19 PM, Neil Bothwick wrote: > On Tue, 31 Jan 2017 12:34:50 -0600, Corbin Bird wrote: > >> The package "sys-boot/grub:2" popped this warning during updates : >> >>> Problems with installed bash completions were found: >>> >&

[gentoo-user] bash-completion question(s)

The package "sys-boot/grub:2" popped this warning during updates : > Problems with installed bash completions were found: > > grub: 'have' command is deprecated and must not be used. > grub: incorrect name, no completions for 'grub' command defined. > grub-mkconfig: missing alias

Re: [gentoo-user] AMDGPU

On 02/07/2017 12:34 AM, Mick wrote: > On Monday 06 Feb 2017 17:11:30 Corbin Bird wrote: >> On 02/06/2017 04:20 PM, Mick wrote: >>> On Monday 06 Feb 2017 21:39:08 jdm wrote: >>>> Hi, >>>> >>>> Just followed the amdgpu wiki guide to get my new g

Re: [gentoo-user] webkit-gtk-2.14.2 cant find sqlite3 symbols

On 02/06/2017 01:09 PM, kelly hirai wrote: > hello fellow gentoo-users, > > for about a month now, i have not been able to make > webkit-gtk-2.14.[2,3] compile. it terminates at the linking step > complaining it cant find some sqlite functions. > > ./configure phase reports sqlite3 availability

Re: [gentoo-user] mesa-12.0.1 fails to emerge

On 02/08/2017 12:47 AM, Mick wrote: > On Tuesday 07 Feb 2017 18:24:06 Corbin Bird wrote: >> On 02/07/2017 05:02 PM, Mick wrote: >>> How could I go beyond this point? >>> >>> = >>> /var/tmp/portage/med

Re: [gentoo-user] webkit-gtk-2.14.2 cant find sqlite3 symbols

On 02/07/2017 09:55 AM, kelly hirai wrote: > > > On 02/06/2017 06:31 PM, Corbin Bird wrote: >> On 02/06/2017 01:09 PM, kelly hirai wrote: >>> hello fellow gentoo-users, >>> >>>for about a month now, i have not been able to make >>> webkit-g

Re: [gentoo-user] AMDGPU

On 02/07/2017 01:49 PM, Mick wrote: > On Tuesday 07 Feb 2017 09:41:19 Peter Humphrey wrote: >> On Tuesday 07 Feb 2017 06:34:43 Mick wrote: >>> On Monday 06 Feb 2017 17:11:30 Corbin Bird wrote: >>>> On 02/06/2017 04:20 PM, Mick wrote: >>>>> On Mon

Re: [gentoo-user] mesa-12.0.1 fails to emerge

On 02/07/2017 05:02 PM, Mick wrote: > How could I go beyond this point? > > = > /var/tmp/portage/media- > libs/mesa-12.0.1/work/mesa-12.0.1/src/gallium/state_track > ers/clover/llvm/invocation.cpp:212:75: error: no matching function for call >

Re: [gentoo-user] bash-completion question(s)

On 02/02/2017 04:38 AM, Dale wrote: > Corbin Bird wrote: >> The package "sys-boot/grub:2" popped this warning during updates : >> >>> Problems with installed bash completions were found: >>> >>> grub: 'have' command is deprecate

Re: [gentoo-user] AMDGPU

On 02/06/2017 04:20 PM, Mick wrote: > On Monday 06 Feb 2017 21:39:08 jdm wrote: >> Hi, >> >> Just followed the amdgpu wiki guide to get my new graphics card up and >> running. Excellent wiki guide and had no issues. Now running with >> shiny graphics and throwing all that Steam has to offer at

Re: [gentoo-user] Problem with gdbus-codegen

On 01/26/2017 09:35 AM, Peter Humphrey wrote: > (Sent via webmail while I continue wrestling with KMail...) > > Alan McKinnon wrote : > >> Does explicitly emerging gdbus-codegen-2.50.2 then re-running a world >> emerge give a different result? > peak ~ # emerj -1

Re: [gentoo-user] a couple of preserved-rebuild problems -- how to fix

On 01/30/2017 08:56 AM, Alan McKinnon wrote: > On 30/01/2017 16:55, John Covici wrote: >> On Mon, 30 Jan 2017 09:32:46 -0500, >> Alan McKinnon wrote: > [snip] > > >> But I found binutils-config and just switched from 2.25-r1 to 2.27, so >> I will see what happens. >> So, after removing the old

Re: [gentoo-user] a couple of preserved-rebuild problems -- how to fix

On 01/30/2017 09:31 AM, Alan McKinnon wrote: > On 30/01/2017 17:15, Corbin Bird wrote: >> On 01/30/2017 08:56 AM, Alan McKinnon wrote: >>> On 30/01/2017 16:55, John Covici wrote: >>>> On Mon, 30 Jan 2017 09:32:46 -0500, >>>> Alan McKinnon wrote: >>&

Re: [gentoo-user] a couple of preserved-rebuild problems -- how to fix

On 01/29/2017 08:02 AM, John Covici wrote: > On Sun, 29 Jan 2017 08:41:59 -0500, > Responses in line. > > Alan McKinnon wrote: >> On 29/01/2017 12:11, John Covici wrote: >>> Hi. I am having a couple of preserved rebuild problems which I have >>> no idea how to fix. >> Ugh. Those problems are

Re: [gentoo-user] Problem with gdbus-codegen

On 01/26/2017 11:15 AM, Peter Humphrey wrote: > Corbin Bird <corbinb...@charter.net> wrote : > > >> If you would please, run this command and post the output ( a test in >> other words ). >> >>> emerge -pvt dev-util/gdbus-codegen:0 > It wants to down

Re: [gentoo-user] media-plugins/gst-plugins-ffmpeg-0.10.13_p201211-r5 won't compile

On 02/18/2017 12:41 PM, Mick wrote: > I'm stuck on this problem today. I ran @preserved-rebuild and this pops up: > > # required by @preserved-rebuild (argument) > # /usr/portage/profiles/package.mask: > # Mart Raudsepp (16 Feb 2017) > # Old gstreamer 0.10 version, which is

Re: [gentoo-user] webkit-gtk-2.14.2 cant find sqlite3 symbols

/local over the standard paths. > > anyway, thanks for your thoughts and sorry for the long turnaround. > > kelly > > > > On 02/07/2017 06:23 PM, Corbin Bird wrote: >> On 02/07/2017 09:55 AM, kelly hirai wrote: >>> >>> On 02/06/2017 06:31 PM, Corbin B

Re: [gentoo-user] Webkit-gtk yelp and dependencies

On 10/03/2016 05:08 AM, meino.cra...@gmx.de wrote: Adam Carter [16-10-03 11:56]: On Mon, Oct 3, 2016 at 2:51 AM, wrote: Hi, this morning it happens again: net-libs/webkit-gtk was updated. For me it means: For a longer time as convenient full

Re: [gentoo-user] from Firefox52: NO pure ALSA?, WAS: Firefox 49.0 & Youtube... Audio: No

On 12/17/2016 09:44 AM, Alan McKinnon wrote: > On 17/12/2016 16:35, Heiko Baums wrote: >> Am 17.12.2016 um 14:17 schrieb Neil Bothwick: >> >>> I'm running the Debian 7 version of Raspbian on a number of Pis, all >>> without systemd. Yes, I am happy using systemd, but I can't be arsed >>> changing

Re: [gentoo-user] Problem matching latest kernel with latest Nvidia

On 01/10/2017 04:22 AM, J. Roeleveld wrote: > On January 10, 2017 10:01:12 AM GMT+01:00, Philip Webb > wrote: >> 170109 Nikos Chantziaras wrote: >>> On 01/09/2017 10:09 AM, Philip Webb wrote: I had a previous thread re Kernel 4.9.0 + Nvidia 375.26 (now >> stable).

Re: [gentoo-user] Linux error messages trying to mimic w*nd*ws ?

On 01/09/2017 10:15 PM, meino.cra...@gmx.de wrote: > Corbin Bird <corbinb...@charter.net> [17-01-10 05:12]: >> On 01/09/2017 02:11 PM, meino.cra...@gmx.de wrote: >>> Hi, >>> >>> I want to burn an iso image onto a rewritable >>> CD (CD-R

Re: [gentoo-user] Re: Problem matching latest kernel with latest Nvidia

On 01/10/2017 01:29 PM, Nikos Chantziaras wrote: > On 01/10/2017 06:31 PM, Corbin Bird wrote: >> You might want to add "static-libs" to the use flags as well. Another >> useful utility gets built by it. > > There doesn't seem to be anything installed by it, exce

Re: [gentoo-user] Linux error messages trying to mimic w*nd*ws ?

On 01/09/2017 02:11 PM, meino.cra...@gmx.de wrote: > Hi, > > I want to burn an iso image onto a rewritable > CD (CD-RW) with k3b. > > I loaded the empty CDRW medium into the burner. > > I started k3b. > > Top left it says: > > "Empty CDRW-medium" > > I pressed "Burn ISO". > > A dialog pops up,

Re: [gentoo-user] Problem matching latest kernel with latest Nvidia

On 01/10/2017 10:46 AM, J. Roeleveld wrote: > On January 10, 2017 5:31:19 PM GMT+01:00, Corbin Bird > <corbinb...@charter.net> wrote: >> On 01/10/2017 04:22 AM, J. Roeleveld wrote: >>> On January 10, 2017 10:01:12 AM GMT+01:00, Philip Webb >> <purs...@ca

Re: [gentoo-user] Re: kernel 4.8.11 nvidia trouble

On 12/03/2016 03:23 AM, Kai Krakow wrote: > Am Fri, 2 Dec 2016 13:00:58 +0100 > schrieb massi ppp : > >> hello >> >> i' m try to install nvidia-drivers latest on gentoo 4.8.11 gcc >> compiler 5.4. >> >> i've compiled kernell with genkernell, the driver has compiled, but

Re: [gentoo-user] nvidia driver missing symbols

On 01/05/2017 09:54 AM, Daniel Frey wrote: > On 01/05/2017 06:12 AM, Corbin Bird wrote: >> On 01/04/2017 10:52 PM, Daniel Frey wrote: >>> So I updated my nvidia driver and got the following: >>> >>> [ 75.557567] nvidia-nvlink: Nvlink Core is being init

Re: [gentoo-user] Re: alsamixer and pulseaudio - which is at fault?

On 12/30/2016 07:44 AM, Mick wrote: > On Friday 30 Dec 2016 12:12:17 Nikos Chantziaras wrote: >> On 12/30/2016 12:04 PM, Nikos Chantziaras wrote: >>> On 12/29/2016 03:21 PM, Mick wrote: Hi All, My sound has been behaving erratically for a while now, probably since pulseaudio

Re: [gentoo-user] depclean missing packages

On 01/03/2017 02:42 PM, Daniel Frey wrote: > So, for the first time I've seen the following message after an `emerge > -uDN world`: > > > # emerge -cp > > * Always study the list of packages to be cleaned for any obvious > * mistakes. Packages that are part of the world set will always > * be

Re: [gentoo-user] nvidia driver missing symbols

On 01/04/2017 10:52 PM, Daniel Frey wrote: > So I updated my nvidia driver and got the following: > > [ 75.557567] nvidia-nvlink: Nvlink Core is being initialized, major > device number 247 > [ 75.557583] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.26 > Thu Dec 8 18:36:43 PST 2016

Re: [gentoo-user] Re: nvidia driver missing symbols

On 01/09/2017 02:09 AM, Philip Webb wrote: > 170105 Nikos Chantziaras wrote: >> On 01/05/2017 08:05 AM, wabe wrote: >>> Make sure that you have also enabled CONFIG_DRM. >>> CONFIG_DRM=y >>> CONFIG_DRM_KMS_HELPER=y >>> CONFIG_DRM_KMS_FB_HELPER=y >>> CONFIG_DRM_FBDEV_EMULATION=y >> For nvidia,

Re: [gentoo-user] The Tao of Portage ... again

On 12/31/2016 09:23 AM, meino.cra...@gmx.de wrote: > Hi, > > and the novice asked: > "Is there the Tao in rpm?" > The master replied: "...ues, there is the Tao in rpm." > "And is there the Tao in yum?" > "Yes, there is Tao in yym also...in every package manager > is the Tao...humble and silent

Re: [gentoo-user] alsamixer and pulseaudio - which is at fault?

On 12/29/2016 07:21 AM, Mick wrote: > Hi All, > > My sound has been behaving erratically for a while now, probably since > pulseaudio started being shipped with various desktop applications. This is > what I am talking about: > > Sound level undesirable > == > Kmail pops up a

Re: [gentoo-user] nvidia driver missing symbols

On 01/05/2017 09:51 PM, Daniel Frey wrote: > On 01/05/2017 05:31 PM, Corbin Bird wrote: >> On 01/05/2017 09:54 AM, Daniel Frey wrote: >>> On 01/05/2017 06:12 AM, Corbin Bird wrote: >>>> On 01/04/2017 10:52 PM, Daniel Frey wrote: >>>>> So I u

Re: [gentoo-user] Portage spokes again...

On 12/21/2016 06:59 AM, Matthias Hanft wrote: > Corbin Bird wrote: >> The "sys-fs/eudev" package is the Gentoo fork of "sys-fs/udev" for >> people who don't want systemd. > Ehm... I still use "sys-fs/udev" (not eudev) without systemd. >

Re: [gentoo-user] from Firefox52: NO pure ALSA?, WAS: Firefox 49.0 & Youtube... Audio: No

On 12/21/2016 06:09 AM, k...@aspodata.se wrote: > Regarding the controversy about systemd etc. > > The problem isn't that systemd is available, or that there exist a > company named Red Had or that there exist a developer named Lennart > Poettering that develops programs. > > The problem is that

Re: [gentoo-user] Portage spokes again...

On 12/20/2016 10:25 PM, meino.cra...@gmx.de wrote: > Hi, > > The master portage spakes again. > And the novice was *not* enlightened... > > > Total: 17 packages (11 upgrades, 4 new, 1 in new slot, 1 reinstall), Size of > downloads: 25097 KiB > Conflict: 4 blocks (4 unsatisfied) > > * Error: The

Re: [gentoo-user] Layman trouble

On 12/18/2016 05:57 AM, meino.cra...@gmx.de wrote: > Hi, > > I am trying to get layman working for me. > I used the informations available here: > https://wiki.gentoo.org/wiki/Layman#repos.conf_method_.28default.29 > and here: > > So far so nice...I can add, fetch and delete repos. > > But

Re: [gentoo-user] Layman trouble

On 12/18/2016 07:43 AM, meino.cra...@gmx.de wrote: > Corbin Bird <corbinb...@charter.net> [16-12-18 14:28]: >> On 12/18/2016 05:57 AM, meino.cra...@gmx.de wrote: >>> Hi, >>> >>> I am trying to get layman working for me. >>> I used the informatio

Re: [gentoo-user] from Firefox52: NO pure ALSA?, WAS: Firefox 49.0 & Youtube... Audio: No

On 12/21/2016 08:28 AM, Rich Freeman wrote: > On Wed, Dec 21, 2016 at 8:36 AM, Corbin Bird <corbinb...@charter.net> wrote: >> The old manual method of configuration is extremely flexible, you can >> get the "who-knows-where-it-came-from-component" to work. The new &

Re: [gentoo-user] ISP extorsion - how to negate / get around?

On 03/10/2017 07:28 PM, Rich Freeman wrote: > On Fri, Mar 10, 2017 at 2:50 PM, Corbin Bird <corbinb...@charter.net> wrote: >> >> My ISP ( Charter ) merged with Time-Warner. New name "Spectrum" >> >> 1 # : Now I have intermittent connectivity. >

Re: [gentoo-user] Something is blocking an addition of fonts

On 03/10/2017 07:24 PM, Harry Putnam wrote: > Setup: VBox vm running gentoo(amd64) guest on a win-10 (64bit) host > Hardware: HP xw8600 - 2x Xeon CPU X5450 @ 3.00GHz - 32 GB ram > > I've added some fonts from outside portage this way: > > (Sorry that what follows is a bit of a confusing mess)

[gentoo-user] ISP extortion [ Partially Resolved ]

Thanks for all the responses. -- AirVPN seems to solve a most if not all of the filtering / blocking issues. ( Don't try their pre-built client / PATHs are wrong. ) -- "emerge-webrsync" was setup with GPG signature checking. What the ISP is doing looks to be ?attaching? / ?embeding? a

[gentoo-user] ISP extorsion - how to negate / get around?

Have a serious problem, might cost me any Internet access. My ISP ( Charter ) merged with Time-Warner. New name "Spectrum" 1 # : Now I have intermittent connectivity. 2 # : And with the death of FCC privacy rules, the new ISP is forcing me to update their records ( for sale-of purposes ). This

Re: [gentoo-user] Helvetica fonts

On 03/06/2017 01:27 PM, the...@sys-concept.com wrote: > Which package contain "Helvetica" font? > > I'm using "flpsed" and apparently it is using Helvetica font, which > "eselect fontconfig list" is not showing anything that resemble "helvet" > "eix helvet" is not showing anything either. > >

Re: [gentoo-user] Re: fonts mostly inaccessable to xterm

On 03/05/2017 01:58 PM, Harry Putnam wrote: > Corbin Bird <corbinb...@charter.net> writes: > > [...] > >> Please clarify ... ... if this is a console only boot ( in vm ), >> ... if this is a GUI Desktop ( in vm ), and/or specific xterm ( i.e >> "x11-t

Re: [gentoo-user] fonts mostly inaccessable to xterm

On 03/05/2017 06:41 AM, Harry Putnam wrote: > Setup: VBox vm running gentoo(amd64) guest on a win-10 (64bit) host > Hardware: HP xw8600 - 2x Xeon CPU X5450 @ 3.00GHz - 32 GB ram > > I've been trying to get fonts to load into xterm most of the day. > > I'm not getting anywhere. > > for

Re: [gentoo-user] Re: fonts mostly inaccessable to xterm

On 03/05/2017 06:52 PM, Harry Putnam wrote: > Corbin Bird <corbinb...@charter.net> writes: > >> >> Have you tried : xterm -fa "9x15B-ISO8859-1"? > > I mentioned that the -fa switch was not working at all. > > I've since discovered that the xter

Re: [gentoo-user] No beep.

On 08/14/2017 01:22 PM, Alan Mackenzie wrote: > Hello, Gentoo. > > I've almost got my new(ish) machine up and running. In particular, I've > got an email server (s/qmail) running on it, the most difficult part of > bringing up a new box. > > However, during the building, I discovered to my

Re: [gentoo-user] Re: Argh, palemoon again ** 3 [Was: GCC 5.4.0]

On 04/26/2017 11:03 PM, Walter Dnes wrote: > On Wed, Apr 26, 2017 at 06:01:20AM +0800, Bill Kenworthy wrote > >> That flag isn't mentioned here. > > I checked the source code. It forces the old ABI, so it should work, > compiled with GCC 5.4.0, even on a Gcc 4.9.4 system... > >

Re: [gentoo-user] gcc with graphite flag?

On 04/28/2017 02:08 AM, Walter Dnes wrote: > In the past, there used to be dire warnings about the difficulty of > installing gcc with graphite. Have things become easier with 5.4.0? > Here's a "dry run" output... > >

Re: [gentoo-user] Issues with AMD_IOMMU

On 05/14/2017 12:31 AM, Adam Carter wrote: > Tried kernels 4.10.13 and 4.11, with > CONFIG_GART_IOMMU=y > CONFIG_IOMMU_HELPER=y > CONFIG_IOMMU_API=y > CONFIG_IOMMU_SUPPORT=y > CONFIG_IOMMU_IOVA=y > CONFIG_AMD_IOMMU=y > CONFIG_AMD_IOMMU_V2=m > Chipset is 990FX, and AFAICT the V2 is for the APU

Re: [gentoo-user] Re: Issues with AMD_IOMMU

On 05/14/2017 11:58 PM, Ian Zimmerman wrote: > On 2017-05-14 20:07, Corbin Bird wrote: > >> Background / System Info : 2 systems. >> Chipset 990FX, FX-9590 ( -march=bdver2 / Fam15h ) >> Chipset 790FX, PhenomII 980 ( -march=amdfam10 / Fam10h ) >> Gentoo x86_64, m

Re: [gentoo-user] Re: Issues with AMD_IOMMU

On 05/15/2017 09:33 PM, Ian Zimmerman wrote: > On 2017-05-15 14:33, Corbin Bird wrote: > >> Gigabyte has long been known to ship 'broken for Linux' e820 firmware. >> 'e820' is basically the APG Aperature setup in the firmware. >> Gigabyte kills OR overrides the IOMMU

Re: [gentoo-user] Re: Issues with AMD_IOMMU

On 05/15/2017 09:59 PM, taii...@gmx.com wrote: > On 05/15/2017 12:58 AM, Ian Zimmerman wrote: > >>> The 990FX / 790FX Chipset doesn't have a GART / AGP Aperature or IOMMU >>> in it. The CPU contains the original K8 IOMMU ( v1 ) engineered / >>> converted from a GART. >>> > The 8 and 9 series

Re: [gentoo-user] Re: Issues with AMD_IOMMU

On 05/16/2017 01:34 AM, Adam Carter wrote: > Answer #1 : > > > Asrock, Extreme6, 990FX, UEFI, AMD FX-9590 > Gigabyte, GA-MA790FX-UD5P, 790FX, BIOS, AMD PhenomII x4 980 > > > Hi Corbin, > > I noticed i didnt have x2apic enabled on my 990FX / FX-8350 system, so > i've rebuilt/rebooted

Re: [gentoo-user] Re: Issues with AMD_IOMMU

On 05/21/2017 06:12 PM, Adam Carter wrote: > > > > [0.991863] iommu: Adding device :06:00.0 to group 12 > > [0.991982] iommu: Adding device :07:04.0 to group 12 > > [1.063849] AMD-Vi: Found IOMMU at :00:00.2 cap 0x40 > > [1.063962] AMD-Vi: Interrupt

Re: [gentoo-user] Re: Issues with AMD_IOMMU

On 05/19/2017 01:39 AM, Adam Carter wrote: > On Wed, May 17, 2017 at 12:25 AM, Corbin Bird <corbinb...@charter.net > <mailto:corbinb...@charter.net>> wrote: > > On 05/16/2017 01:34 AM, Adam Carter wrote: > > Answer #1 : > > > > >

Re: [gentoo-user] managing chromium exceptions

On 06/04/2017 09:39 AM, Daniel Frey wrote: > On 06/04/2017 02:17 AM, Jorge Almeida wrote: >> I just had the experience of visiting a linux-related site >> (http://libv.livejournal.com/22968.html) and seeing a panel with ads >> about house appliances (from a site I had actually visited before). >>

Re: [gentoo-user] which microcode gets loaded?

On 05/13/2018 10:39 PM, tu...@posteo.de wrote: > Hi, > > from a previous thread I learned which micorcode file needs > to be loaded for the "fight against Spectre and Melddown"... > > Now two question came up for me: > 1.) WIth this particular micorcode loaded: Do I need to activate > the

Re: [gentoo-user] Where are the AMD microcode updates for spectre?

On 05/12/2018 03:20 PM, taii...@gmx.com wrote: > ^title > AMD has released them for all of the recent CPU's and I simply must have > them. > > It seems the last update to amd-ucode on linux-firmware was in 2016, > does anyone know whom I would contact about this who has the juice to do > it? I

Re: [gentoo-user] Where are the AMD microcode updates for spectre?

On 05/12/2018 07:21 PM, Adam Carter wrote: > Gentoo does have the newer microcode blobs stashed on a server ( > > somewhere ). > > That does pull in the blobs for : > > Fam10h ( microcode_amd.bin ) > > Fam15h ( microcode_amd_fam15h.bin ) > > Fam16h ( microcode_amd_fam16h.bin )

Re: [gentoo-user] Where are the AMD microcode updates for spectre?

On 05/20/2018 03:59 AM, Adam Carter wrote: > > > This has indeed been pretty frustrating. > > As far as I can tell there is no official AMD microcode update > page, or any > kind of official release notes.  I'm not sure where linux-firmware > actually > gets the microcode

Re: [gentoo-user] Where are the AMD microcode updates for spectre?

On 05/20/2018 06:46 PM, Adam Carter wrote: > How often does the linux-firmware package update? On a schedule or as > > needed? > > > There's a version bump request bug in for these and new AMDGPU > firmware. Hopefully it will get processed quickly. > > https://bugs.gentoo.org/656136 . Thank

Re: [gentoo-user] [Maybe OT]: Instability of system

On 05/20/2018 03:54 PM, Alan Mackenzie wrote: > Hello, Gentoo. > > I'm having problems with my machine hanging or rebooting spontaneously. > It's doing this, perhaps, every three or four weeks. I think that when > I'm in X, the system usually reboots, when I'm on a tty, it hangs. --- > Other than

[gentoo-user] AMD microcode problem - Fam15h ( FYI )

FYI : Did the microcode update, compiled and installed the 4.9.101 kernel with it. After rebooting, I started having kernel hard lock problems. Before compiling / installing kernel 4.9.102, I made an addition to the CFLAGS var in make.conf : -mno-lwp ( 'lwp' is 'Light Weight Profiling' ) No

Re: [gentoo-user] Where are the AMD microcode updates for spectre?

On 05/22/2018 03:41 AM, Adam Carter wrote: > On Tue, May 22, 2018 at 2:47 PM, taii...@gmx.com > > wrote: > > The fam15h microcode update adds IBPB > >   * Indirect Branch Prediction Barrier (IBPB) >     * PRED_CMD MSR is

Re: [gentoo-user] AMD microcode problem - Fam15h ( FYI )

On 05/24/2018 05:32 PM, Adam Carter wrote: > > For me dmesg says; > [    1.538275] microcode: CPU0: patch_level=0x06000852 > > but i still have lwp in /proc/cpuinfo. Are you at 0x06000852 ? . This is my dmesg output : . [    1.111448] microcode: microcode updated early to new

Re: [gentoo-user] AMD microcode problem - Fam15h ( FYI )

On 05/25/2018 08:50 PM, Adam Carter wrote: > > > For me dmesg says; > > [    1.538275] microcode: CPU0: patch_level=0x06000852 > > > > but i still have lwp in /proc/cpuinfo. Are you at 0x06000852 ? > . > This is my dmesg output : > . > [    1.111448] microcode:

[gentoo-user] AMD Ucode Correction, Fam15h

FYI to all with an interest in AMD Ucode. AMD fixed the 'lwp' instruction(s) in a latter ucode update. -- 2018-05-18 linux-firmware: Update AMD cpu microcode * Add AMD cpu microcode for processor family 17h * Update AMD cpu microcode for processor family 15h

Re: [gentoo-user] AMD microcode problem - Fam15h ( FYI )

On 05/27/2018 06:12 AM, Adam Carter wrote: > Also, are you saying that the sequence of events for you was; > - booted with new microcode, and lwp was missing from /proc/cpuinfo > - you had instability > - you rebuilt with -mno-lwp > - stability returned . - quickpackage'd

Re: [gentoo-user] A config file for the magical combo of....

On 07/01/2018 03:04 PM, Mick wrote: > What do you mean "would not load"? From the live ISO? > > I had no such problem here on a bare metal install (no Windows) with > sysrescuecd. You have to make sure the sysrescuecd is booting in UEFI mode > before you proceed with the installation. > > >>

Re: [gentoo-user] A config file for the magical combo of....

On 07/01/2018 12:05 PM, Andrew Lowe wrote: > Hi all, > I'm trying to get a new computer working. I've decided to go the UEFI > route but something is being a bit obstinate. Would anyone have the > combination of a Gigabyte motherboard, x470 Ultra, with an AMD Ryzen 7 > 2700 CPU? Set up to

Re: [gentoo-user] A config file for the magical combo of....

On 07/02/2018 01:36 PM, Mick wrote: > On Monday, 2 July 2018 19:20:29 BST Corbin Bird wrote: >> On 07/01/2018 03:04 PM, Mick wrote: >>> What do you mean "would not load"? From the live ISO? >>> >>> I had no such problem here on a bare metal instal

Re: [gentoo-user] Re: Mammoth emerge ...

. Chromium switched to 'clang++ v5.x' as its primary compiler. Why? The Chromium devs are using 'c++' features supported in gcc v8+. . So ... first compile run is with 'gcc' ... then Chromium is re-compiled with 'clang++'. That is what I am seeing ( console && log wise ). 2 Compile runs ... twice

Re: [gentoo-user] Microcode updates for "old" Intel CPU's

On 01/09/2018 01:56 AM, Mick wrote: > On Monday, 8 January 2018 17:47:03 GMT Corbin Bird wrote: >> On 01/07/2018 02:46 PM, taii...@gmx.com wrote: >>> I have several sandy/ivybridge CPU's and I was wondering if anyone >>> knows as to if intel is releasing

Re: [gentoo-user] glibc emerge error

On 01/10/2018 12:22 PM, Matthias Hanft wrote: > Corbin Bird wrote: >> Is anyone else having a sys-libs/glibc emerge compile failure? >>> *** LD_LIBRARY_PATH shouldn't contain the current directory when >>> *** building glibc. Please change the environment variable >

Re: [gentoo-user] Re: glibc emerge error

On 01/10/2018 01:53 PM, Nikos Chantziaras wrote: > On 10/01/18 19:55, Corbin Bird wrote: >> Is anyone else having a sys-libs/glibc emerge compile failure? >> >>> checking for python3... python3 >>> checking LD_LIBRARY_PATH variable... contains curre

Re: [gentoo-user] Fail to configure polari and gnome-documents with portage.

On 01/04/2018 10:31 AM, Personal wrote: > Hi list. > > I can't install polari and gnome-documents using portage. Using > ./configure by myself there is no problem. I post the polari output: > Emerging (1 of 1) net-irc/polari-3.22.2::gentoo >  * polari-3.22.2.tar.xz BLAKE2B SHA512 size ;-) >

[gentoo-user] glibc emerge error

Is anyone else having a sys-libs/glibc emerge compile failure? > checking for python3... python3 > checking LD_LIBRARY_PATH variable... contains current directory > configure: error: > *** LD_LIBRARY_PATH shouldn't contain the current directory when > *** building glibc. Please change the

Re: [gentoo-user] microcode applied?

On 01/07/2018 09:24 PM, Adam Carter wrote: > Does the absence of a "microcode updated" message in dmesg imply that > the microcode was not updated? > > I believe my fam10/barcelona AMD CPU will use > amd-ucode/microcode_amd.bin but there's no update message. > > I've checked the config against

Re: [gentoo-user] Microcode updates for "old" Intel CPU's

On 01/07/2018 02:46 PM, taii...@gmx.com wrote: > I have several sandy/ivybridge CPU's and I was wondering if anyone > knows as to if intel is releasing microcode updates for them. > > It sure would be funny if intel wanted you to buy a new CPU to fix a > problem that was their fault to begin

Re: [gentoo-user] Re: Kernel 4.14.14 has meltdown / spectre info in /sys

On 01/18/2018 02:43 PM, Rich Freeman wrote: > cat /sys/devices/system/cpu/vulnerabilities/meltdown Strange, get this response from kernel 4.9.76-r1 > Darkstar ~ # cat /sys/devices/system/cpu/vulnerabilities/meltdown > cat: /sys/devices/system/cpu/vulnerabilities/meltdown: No such file or >

Re: [gentoo-user] kernel 4.9.77 error segfault in compile.

On 01/23/2018 01:42 AM, Alexander Kapshuk wrote: > On Tue, Jan 23, 2018 at 4:34 AM, Corbin Bird <corbinb...@charter.net> wrote: >> On 01/22/2018 11:56 AM, Rich Freeman wrote: >>> On Mon, Jan 22, 2018 at 12:11 PM, Alexander Kapshuk >>> <alexander.kaps...@g

Re: [gentoo-user] kernel 4.9.77 error segfault in compile.

On 01/23/2018 11:06 PM, Adam Carter wrote: > > FYI, this is from 4.14.15's ChangeLog, doesn't appear to be in 4.9.78 > though. > > commit f41b2d7ee791e845147a3e3cafb25493dca6870a > Author: Josh Poimboeuf > > Date: Mon Jan 15 08:17:07 2018 -0600

Re: [gentoo-user] UEFI-fails to boot

On 01/26/2018 04:00 AM, Dan Johansson wrote: > On 26.01.2018 02:25, Johnson Steward wrote: >> Well, check if you have CONFIG_FB_EFI enabled in your config. > Good idea, but sadly, nope, that was not it. > > KR . Questions that may sound strange ... What version of Windows does your motherboard

Re: [gentoo-user] emerge error for dev-lisp/clisp-2.49-r9

On 01/14/2018 02:39 PM, Quico Jurado wrote: > Hello, > > After doing doing the upgrade to my 17.0 profile > (`default/linux/amd64/17.0/desktop'), and recompiling all my packages > I ran into a problem while installing clisp. Basically is bailing out > on the configure stage, this is the relevant

Re: [gentoo-user] Microcode updates for "old" Intel CPU's

On 01/11/2018 05:02 PM, Rich Freeman wrote: > On Thu, Jan 11, 2018 at 5:41 PM, Mick wrote: >> Most vendors only sell Intel in their laptops. I could build a desktop I >> guess, but Ryzen is also affected by Spectre. With Intel's burning platform >> I >> want to

Re: [gentoo-user] Re: glibc emerge error

On 01/11/2018 08:29 AM, Nikos Chantziaras wrote: > On 11/01/18 15:28, Corbin Bird wrote: >>> Why are you setting LD_LIBRARY_PATH system-wide to begin with? Don't >>> do that. >> >> Unfortunately, I had to ( and didn't realize the implications. ) >>

Re: [gentoo-user] Microcode updates for "old" Intel CPU's

On 01/12/2018 12:42 PM, Mick wrote: > On Friday, 12 January 2018 17:47:46 GMT Rich Freeman wrote: >> On Fri, Jan 12, 2018 at 11:23 AM, Corbin Bird <corbinb...@charter.net> > wrote: >>> On 01/11/2018 05:02 PM, Rich Freeman wrote: >>>> IMO Spectre i

Re: [gentoo-user] Re: glibc emerge error

On 01/12/2018 04:14 PM, Nikos Chantziaras wrote: > echo "$VULKAN_SDK/lib" > /etc/ld.so.conf.d/vulkan-loader.conf Found out what was giving me an extra slash in the output "...x86_64//lib" The $VULKAN_SDK PATH had a slash at the end. Works now. Thank you. Corbin

Re: [gentoo-user] UEFI-fails to boot

On 01/28/2018 04:35 AM, Dan Johansson wrote: >>> ASPEED's AST2500 Display To Be Supported By Linux 4.11's DRM >>> >>> https://www.phoronix.com/forums/forum/linux-graphics-x-org-drivers/x-org-drm/935002-aspeed-s-ast2500-display-to-be-supported-by-linux-4-11-s-drm > Thanks for that link, I will

Re: [gentoo-user] Downloading podcasts via the command line?

On 01/27/2018 06:38 AM, Stroller wrote: > Can anyone recommend a command line podcast downloader, please? > > Ideally I want to run it in a cronjob, saving .mp3 files which can be > uploaded to my Google Drive (using net-misc/drive). > > My priority is NPR's Planet Money podcasts - I think

Re: [gentoo-user] UEFI-fails to boot

On 01/27/2018 10:06 AM, Dan Johansson wrote: > According to the supermicro homepage The following Windows versions are > supported: 7 SP1, 8 Enterprise, 8.1 Enterprise, 10, Server 2008 R2 SP1, > Server 2012 and Server 2012 R2. > > No PCI/PCIe cards installed (yet). > No special Video driver in the

Re: [gentoo-user] New install .. no high res console during boot.

On 01/31/2018 07:38 AM, Harry Putnam wrote: > Setup: > Installing gentoo-17 as guest in Vbox vm on solaris-11 HOST >(openindiana (powered by Illumos)) > > VBox 5.6.2 > Kernel-4.15.0 > grub2 > > I'm a litte confused about how to enable a high res framebuffer > console.

Re: [gentoo-user] [OT] audio controller compatible with Linux

On 02/23/2018 03:21 PM, the...@sys-concept.com wrote: > Can anybody suggest an audio controller / speakers that is compatible > with Linux (something that does not need Mac, iPhone or Windows etc). > For example, if I play the music on my Linux system or listen to an > audio I would like to stream

Re: [gentoo-user] Expect a ~15% average slowdown if you use an Intel processor

On 01/03/2018 09:34 PM, Adam Carter wrote: > > Project Zero (Google) found it; > > https://googleprojectzero.blogspot.com.au/2018/01/reading-privileged-memory-with-side.html > > > > >

Re: [gentoo-user] Expect a ~15% average slowdown if you use an Intel processor

On 01/04/2018 08:17 AM, Rich Freeman wrote: > On Thu, Jan 4, 2018 at 8:44 AM, Corbin Bird <corbinb...@charter.net> wrote: >> According to the Project Zero documentation having BPF JIT enabled >> is the key to the exploit. >> >> The way the docs read ... can

  1   2   >