Hi All,
I've just installed KDE 4.3.95 from the kde overlay and was expecting the
network manager applet to be installed by default but it doesn't appear to be.
Does anyone know how I install this? Is it an ebuild that's not part of the
@kde-4.4 set?
Cheers,
Dave.
It's ok I found it. kde-misc/knetworkmanager. I had a local ebuild that was
overriding it which didn't compile and that was confusing me.
Cheers,
Dave.
On Wednesday 27 January 2010 10:16:37 Dave Oxley wrote:
Hi All,
I've just installed KDE 4.3.95 from the kde overlay and was expecting
I'm trying to emerge kde-4.3 but get the following block that I've been
unable to resolve. Anyone have any ideas?
Cheers,
Dave.
[blocks B ] sys-libs/e2fsprogs-libs-1.41.8
(sys-libs/e2fsprogs-libs-1.41.8 is blocking sys-apps/util-linux-2.16)
('installed', '/',
I'd already looked for a later version of e2fsprogs-libs but there isn't
one. Any other ideas?
Cheers,
Dave.
Alan McKinnon wrote:
On Wednesday 05 August 2009 09:28:30 Dave Oxley wrote:
I'm trying to emerge kde-4.3 but get the following block that I've been
unable to resolve. Anyone have
that util-linux no longer complains (as it likely finds a version of
e2fsprogs-libs that it is happy with)
On Wednesday 05 August 2009 10:37:51 Dave Oxley wrote:
I'd already looked for a later version of e2fsprogs-libs but there isn't
one. Any other ideas?
Cheers,
Dave.
Alan
Since late February any mail delivered to folders other than inbox using
procmail have been given ownership of root:mail instead of
david:users as it was previously. A new version of procmail was
installed on 21 Feb so I'm assuming thats caused this issue. Does anyone
have any ideas how to fix
Holger Hoffstaette wrote:
On Tue, 16 Dec 2008 18:01:20 +1100, Dave Oxley wrote:
I upgraded from gentoo-sources-2.6.27-r4 to -r5 a couple of days ago and
got the below error messages in /var/log/messages. Also dovecot was using
100% CPU and could not be killed. This resulted in me having
I upgraded from gentoo-sources-2.6.27-r4 to -r5 a couple of days ago and
got the below error messages in /var/log/messages. Also dovecot was
using 100% CPU and could not be killed. This resulted in me having to
hard reset the server. This happened 3 times until I eventually reverted
back to
Thomas Kahle wrote:
Hi,
as your post turned into the usual kde 4 is good/bad flamewar I will
just try to answer the question:
The people working on the overlay plan to bringt kde 4.1.1(not 4.1.0)
into the tree. This will be released on next week and enter the tree
hopefully shortly after that.
Stroller wrote:
On 27 Aug 2008, at 05:28, Dave Oxley wrote:
...
I've just added a fourth disk to my Raid 5 set increasing the
capacity from 1.5TB to 2.25TB. I have 4 partitions on this volume
set; the fourth of which is 1.49TB which is then further subdivided
using lvm2. ...
Hi
All,
I've just added a fourth disk to my Raid 5 set increasing the capacity
from 1.5TB to 2.25TB. I have 4 partitions on this volume set; the fourth
of which is 1.49TB which is then further subdivided using lvm2. So using
fdisk I deleted partition 4 and recreated it from the same position
.
Cheers,
Dave.
Volker Armin Hemmann wrote:
On Donnerstag, 10. Juli 2008, Dave Oxley wrote:
I've installed 9.4.2-P1 but http://www.doxpara.com/ says I'm still
vulnerable. What more do I need to do?
you need to install the updated tools to. Client and server side have to be
fixed
I've installed 9.4.2-P1 but http://www.doxpara.com/ says I'm still
vulnerable. What more do I need to do?
Cheers,
Dave.
Mick wrote:
Hi All,
Have you seen this?
http://uk.news.yahoo.com/afp/20080709/ttc-us-it-internet-software-crime-e0bba4a.html
and this?
http://www.doxpara.com/
Is it
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've installed Snort and BASE on my Gentoo server, which is also my the
network router, by following http://lurker.gentoo-wiki.com/HOWTO_Snort.
It's generated a fair number of alerts over the last few weeks so it
looks like it's working. But how
Daniel Iliev wrote:
On Sat, 28 Jun 2008 01:16:37 +1000
Dave Oxley [EMAIL PROTECTED] wrote:
So what I want to do is setup my switch as a router.
No can do.
My switch is a SGE2000P which is also a layer 3 router.
I'm a bit of a newbie on advanced networking but I think
I have 2 Internet connections, 1 fast ADSL and 1 slow wireless as a
backup. My router doesn't do automatic failover or even have support for
multiple WAN connections so I thought I'd set up PPP connections on my
Gentoo server that do PPPoE to the 2 modems which I connected directly
to my
I've just upgraded to firefox 3rc1. I put the necessary in
/etc/portage/package.* but it didn't appear when doing an update world.
So I did an 'emerge -av mozilla-firefox'. This worked and you can see is
still working:
baldrick ~ # emerge -av mozilla-firefox
These are the packages that would
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've got KDE4 installed and running mostly fine. It loses some
configuration on a log off and on and it shows 2 batteries rather than
the 1 which is the only one the laptop has! But other than that switched
to it by default now. How do I prevent a
Just a simple question: Is there a try icon for unmounting removable
hardware (USB sticks etc)? Currently I go into konquerer and browse to
media://, right mouse click and click 'safely remove'. Its just a little
annoying!
Cheers,
Dave.
--
[EMAIL PROTECTED] mailing list
Mauro Faccenda wrote:
On Monday 30 July 2007 20:36, Dave Oxley wrote:
Just a simple question: Is there a try icon for unmounting removable
hardware (USB sticks etc)? Currently I go into konquerer and browse to
media://, right mouse click and click 'safely remove'. Its just a little
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Neil Walker wrote:
Dave Oxley wrote:
I am unable to send email to hotmail. I thought I had a misconfiguration
in sendmail, but I have just tried a telnet (See below). Although I can
send emails to hotmail without an error or undeliverable report
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dave Oxley wrote:
I am unable to send email to hotmail. I thought I had a misconfiguration
in sendmail, but I have just tried a telnet (See below). Although I can
send emails to hotmail without an error or undeliverable report, none
show up in my
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jan Seeger wrote:
Concerning Number 2:
You need to have gensplash enabled in the Kernel (which it is), and have
emerged the splashutils packages. Also, you need to modify your grub.conf
to use a framebuffer. Furthermore, you need to create an
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a EMT64 server that runs a mythtv backend as well as other things
and a AMD64 mythtv frontend which has been running with its own hard
disk and therefore install of Gentoo for sometime. I am looking at
building another frontend without a disk
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a Gentoo server that is running Cisco VPN software to connect to
my companies VPN. I have setup the server as a NAT for the specific
subnet required for the VPN and the rest of my traffic goes through my
router (192.168.1.1). I currently have
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I have a MythTV frontend running Gentoo on an AMD 64bit with an Nvidia
6600 graphics card. I have had no end of problems with the graphics card
(Xid errors). It crashes with a white line across the screen regularly
when 3d goom is up when I'm
I have a Dell server that runs Gentoo. I have been running kernel
2.6.18-r3 with the third party arcmsr add on driver without any
problems. I have tried to upgrade to 2.6.19-r1 with the kernels inbuild
arcmsr driver but I cannot get it to boot. It says that it cannot find
the root fs on sdc3.
Douglas Linford wrote:
Dave,
This may sound goofy...but do you have any external drives connected to
you box, ie, USB, ieee, or card readers?
When I had my extenal USB hard disk turned on or my internal card
readers connected when I booted Gentoo, boot would stop and it would say
the same
Norberto Bensa wrote:
Dave Oxley wrote:
I have a Dell server that runs Gentoo. I have been running kernel
2.6.18-r3 with the third party arcmsr add on driver without any
problems. I have tried to upgrade to 2.6.19-r1 with the kernels inbuild
2.6.19 sucks.
Not only it moved CONFIG_SATA_
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hans-Werner Hilse wrote:
Hi,
On Mon, 06 Nov 2006 00:09:23 +1100 Dave Oxley [EMAIL PROTECTED]
wrote:
Since upgrading to the 2.6.18 kernel I get this on my client machine
when trying to emerge. I have distfiles mapped to a server samba share
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Since upgrading to the 2.6.18 kernel I get this on my client machine
when trying to emerge. I have distfiles mapped to a server samba share
and this works if I boot back up into 2.6.17. Does anyone have any ideas
how to stop this happening?
Emerging
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I just updated world on my server today and now Tomcat won't start. I
have no idea why. When I start it I just get [!!]. I removed all the
extra spaces from all the parameters and put an echo around the
start-stop-daemon line and when I run the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Does anyone know why the OptusC1-156E file that comes with dvbscan
doesn't match what's defined on lyngsat.com? For example Fox Sports 1
(sid 3001) is listed on lyngsat as 12478 H, SR 27800, 3/4 but in
channels.conf it is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I want to install a blog on my web server and was going to install
Nucleus CMS (http://nucleuscms.org/) as I've used it in the past but I
can't find an ebuild. Is there an ebuild or is there a better package
for blogging?
Cheers,
Dave.
-BEGIN PGP
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have the new Java system installed but I have a problem. I accidently
removed net-dns/libidn when I did an 'emerge --depclean', but its
required by Asterisk. When I try to emerge it I get the output below.
Anybody know how I can fix this.
Cheers,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Bo Ørsted Andresen wrote:
On Wednesday 28 June 2006 12:59, Dave Oxley wrote:
I have the new Java system installed but I have a problem. I accidently
removed net-dns/libidn when I did an 'emerge --depclean', but its
required by Asterisk. When I try
Rafael Castro wrote:
On Jun 26, 2006, at 12:16 AM, Dave Oxley wrote:
I left an emerge of Qt running at the weekend which downgraded my Xorg
from 7.0 to 6.8 (I was missing virtual/x11 ~amd64 in package.keywords).
When I came back to the machine I unmerged Xorg which deleted a load
I left an emerge of Qt running at the weekend which downgraded my Xorg
from 7.0 to 6.8 (I was missing virtual/x11 ~amd64 in package.keywords).
When I came back to the machine I unmerged Xorg which deleted a load of
libraries that were installed with 7.0, but the system thinks they are
still
I have just run 'emerge --update --deep --newuse world' on 2 of my
Gentoo machines as I do every few days. This upgraded my udev from
068-r1 to 070. Neither machine will now boot. I've been investigating
why on my server as it is most important that I get this machine up and
running ASAP.
I have just downgraded udev to 068-r1 and my server now boots again. I'm
about to do the same with my other Gentoo machine. The only thing the 2
machines have in common is that they both have SATA drives, so I wonder
if this is causing the new udev a problem.
Dave.
Dave Oxley wrote:
I have
Roy Wright wrote:
Dave Oxley wrote:
I have just downgraded udev to 068-r1 and my server now boots again.
I'm about to do the same with my other Gentoo machine. The only thing
the 2 machines have in common is that they both have SATA drives, so
I wonder if this is causing the new udev
.
James wrote:
Dave Oxley dave at daveoxley.co.uk writes:
Yeah, its a hub. I'll stop trying to set it to full duplex now.
It is 40 times quicker in one direction than the other. Can you
give me a hint where to go from here.
Try connecting the 2 systems with only a 'cross-over
Hi Mark,
Thanks for the reply. Unfortunately, I had already tried power cycling
my hub and it made no difference.
Cheers,
Dave.
Mark Knecht wrote:
On 10/3/05, Dave Oxley [EMAIL PROTECTED] wrote:
Hi all,
I have two Gentoo machines (specified as Server and Client for ease).
The server
to Server (i.e. transmit) 7.383Mb/sec
It is 40 times quicker in one direction than the other. Can you give me
a hint where to go from here.
Cheers,
Dave.
kashani wrote:
Dave Oxley wrote:
Hi Mark,
Thanks for the reply. Unfortunately, I had already tried power
cycling my hub and it made
Its on board the motherboard. I could put a second NIC in but I don't
want to waste the pci slot. This is an HTPC.
Dave.
Uwe Thiem wrote:
On 04 October 2005 07:28, Dave Oxley wrote:
Hi all,
I have two Gentoo machines (specified as Server and Client for ease).
The server networking
Hi all,
I have two Gentoo machines (specified as Server and Client for ease).
The server networking is working fine, but the client cannot receive
without lots of collisions. The speeds I get are:
Server - Client (i.e. receive) 170.3Kb/sec
Client - Server (i.e. transmit) 7.383Mb/sec
The cards
46 matches
Mail list logo
