Hi,
just for information, i report that i've filed a bug on bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=9167
regards,
m
On 10/13/07, Marco Calviani <[EMAIL PROTECTED]> wrote:
> Beso,
>yes i'm always staying in powersave mode.. but in any case the
>
Beso,
yes i'm always staying in powersave mode.. but in any case the
CPU temperature tends to increase. I hope that the ACPI guys will work
on this (hoping i'm not the only one experiencing these problems). The
fans unfortunately are masked to the user in most Acer laptops, and
they are cont
ing the newly
> compiled driver. if you manage to get it working in this way ok, if not try
> contacting the guy maintaing the aceracpi module and tell him about you
> problems. he may be of help.
>
>
> 2007/10/11, Marco Calviani <[EMAIL PROTECTED]>:
> > Hi Beso,
>
o a depmod -a and update the modules installed and retry loading the newly
> compiled driver. if you manage to get it working in this way ok, if not try
> contacting the guy maintaing the aceracpi module and tell him about you
> problems. he may be of help.
>
>
> 2007/10/11, Marco C
needs an additional acpi module to have it work correctly). that was why
> i've asked you for your brand and model name.
>
> 2007/10/11, Marco Calviani <[EMAIL PROTECTED]>:
> > Hi Beso,
> >i've tried with your trip_points modification but it gives this error
ermal zone 1 : ok, 40 C
PS: i followed all your suggestions concerning the microcode and fan
option in the kernel.
Could this be a problem of DSDT?
regards,
m
On 10/10/07, Beso <[EMAIL PROTECTED]> wrote:
>
>
> 2007/10/10, Marco Calviani <[EMAIL PROTECTED]>:
> > Hi B
>
> AFAIK only if you have lm_sensors installed and sensors working.
Yes there are both installed. But what do you mean?
m
--
[EMAIL PROTECTED] mailing list
t as a module you should
> be loading it with initramdisk before loading acpi to have a full acpi
> configuration).
> try setting these options and recompile and install the new kernel and
> modules and reboot (kexec is not working on my amd turion with 64bit enabled
> and so ma
Hi Volker,
i'm attaching my kernel .config. As you can see all the ACPI related
points are enabled.
> posting your config? make menuconfig and reading the help-text to all the
> acpi-options?
>
Thanks, i've found fancontrol, but since the laptop lacks some chipset
to control the fan itself, the
Hi Volker,
yes i can imagine there could be something wrong with ACPI, but how
can i recognize it? What is fancontrol?
m
> ACPI. You might be missing some options there. Or something else. Are you
> using fancontrol? If yes, try without, if no, try with it ;)
> --
--
[EMAIL PROTECTED] mailing
how your
> processors reacts to programs. remember to also install the klaptopdaemon
> since is quite useful in controlling the cpufreq_utils governors and acpi
> settings. try also the laptop_mode-tools and see if they can help you have a
> better use for your disk. the last thing that you
Hi list,
i have a Santa Rosa (Core 2 Duo T7300) Acer AS5720 laptop, and i'm
getting problems with the temperature of the CPU. In particular i'm
using the coretemp module for determining the core temperature.
Normally (using cpufreqd and the "ondemand" governor) the CPU stays at
nearly 50C (whic
I've seen also this thread:
http://forums.gentoo.org/viewtopic-t-543623-postdays-0-postorder-asc-highlight-fonts+32bit-start-50.html
but no luck...
m
On 8/31/07, Marco Calviani <[EMAIL PROTECTED]> wrote:
> Hi,
> i'm running on Gentoo 64bit. I've just upgraded the sy
this error does not appear with the 64bit compiled
version of firefox and thunderbird.
Regards,
Marco Calviani
<>
Hi Mateus,
yes, i've tried different target machines, and tried from different
origin client to the same target but the results are the same.
>
> Have you tryid connecting to other machines as well?(not from, but to)
>
m
--
[EMAIL PROTECTED] mailing list
Hi lists,
i'm trying to remotely login to a Gentoo box via ssh. However (and
the behaviour is the same from different machines) whenever i try to
login the procedure hangs before recognizing the remote protocol
version:
ssh -vvv [EMAIL PROTECTED]
OpenSSH_4.5p1, OpenSSL 0.9.8d 28 Sep 2006
debug
Hi James and the others,
thank you very much, this option made the trick.
Regards,
marco
On 7/19/07, James Ausmus <[EMAIL PROTECTED]> wrote:
man mount
/user
gets you (*'s added by me for easy find):
user Allow an ordinary user to mount the file system. The
name of th
Hi,
i have a problem with NFS. A partition mounted on machine gentoo1 is
correctly exported and mounted in gentoo2 (that is, it is possible to
read and write on it). However whenever i try to execute a program
from gentoo2 that it is stored on the exports of gentoo1, i get the
"Permission denied"
e:
Hi,
On Mon, 11 Jun 2007 16:19:58 +0200 "Marco Calviani"
<[EMAIL PROTECTED]> wrote:
>i would like some technical advice concerning the possibility of
> mounting two network devices on the same desktop computer. One network
> card (which is binded to a fixed IP) al
Hi list,
i would like some technical advice concerning the possibility of
mounting two network devices on the same desktop computer. One network
card (which is binded to a fixed IP) allows me to allow the machine to
be visible on the public network, while the second one (faster, the
one i've ins
Hi list,
i'm running gentoo with a US keyboard layout. However i would like
to add also a russian layout (with cyrillic fonts), to be used either
with the console and inside X. First of all i've tried to "Enable
keyboard layouts" with KDE, but when i try to write something with
this enabled i've
Hi,
i would like to use an x1300 video card with the radeon opensource
video driver. Is it supported (at least for the 2d part)?
Regards,
m
--
gentoo-user@gentoo.org mailing list
Ok,
i've solved all the issues installing from the small-gentoo amd64
r6 ISO cd it contains a "bleeding edge" 2.6.20 rc(something)
kernel (useful also if one has issues with the JMicron PATA
controller)
cheers,
m
On 1/30/07, Dan Farrell <[EMAIL PROTECTED]> wrote:
On Tue, 30 Jan 2007 22:08
Hi Andrew,
Last kernels does support this LAN chipset (r8169 module).
ok that's fine. however i'll have to install gentoo without the "nice"
gentoo graphical linux installer, is it right?
regards,
m
--
gentoo-user@gentoo.org mailing list
Hi list,
i would like to install gentoo on a new Asus P5B motherboard which
have a RTL8111/8168B PCI express network chipset. I'm using the 2006.1
amd64 livecd but unfortunately the network card is not recognized.
Does anyone has experience with this type of chipset and Gentoo?
Regards,
m
--
g
Hi,
So just try same think with "sync" and tell us if it work ...
no same situation even with sync. After some time it get freezed.
Perhaps a bug on kernel too, try another kernel : vanilla-sources for
example
vanilla has no gentoo patch, perhaps a bug in this, need to try
Do you use genkern
Hi Devon,
Please run lsusb -v on the Debian system with the USB drive installed.
this is the relevant result of lsusb -v in the Debian system:
Bus 004 Device 004: ID 0402:5642 ALi Corp.
Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB 2.00
bDevic
Hi,
Does it work on other system ? like freebsd (live cd => freebies), or
Windows (M$$) ???
yes they are working an a Win machine and on a machine with Debian stable (3.1).
Could you give us the model of your material ? I don't remember, it's a hard
drive ?
yes it's an hard drive. The fact
Hi,
so ... still hang up ?
well unfortunately it gives the same result.
Is there a way to log the activity of the USB devices?
Regards,
m
--
gentoo-user@gentoo.org mailing list
Hi all,
I seem to recall that loading multiple USB controller drivers can
cause problems on some systems. You might try unloading all of these
with rmmod, then loading just one, and see if your drive will work. I
believe for most systems the ehci_hcd driver would be the preferred
one.
Posting
Hi,
On 1/1/07, Strong Cypher <[EMAIL PROTECTED]> wrote:
What are your kernel version ? (uname -a)
What are your kernel package ? (gentoo-sources ???)
So perhaps a bug with a kernel you install recently
I have so hardware, that bug awfully with certain version of kernel, and do
hang up after a
Hi Richard,
Marco, if you suspect this at all, you can set RC_COLDPLUG=no in
/etc/conf.d/rc to completely disable module loading by udev.
actually the variable is set that way with RC_COLDPLUG=no. I've tried
with similar USB drives, and the behaviour is the same. I've tried to
blacklist again
Hi list,
some days ago i've upgraded to udev-103 (stable version). Since
then i've experienced complete freezes of the machine (nothing
responds, even external ping on the network) when USB devices are
mounted. In case nothing is connected to the USB drive the machine can
stay online without *
Hi list,
i would like to report that i've solved this issue by using, as a
compiler for the application, not the standard gcc compiler, but the
MPICH2-created compiler, i.e. mpicc (for c/c++) and mpif90 as the
Fortran 90 compiler.
Cheers,
mc
i'm compiling a program that uses the MPICH2-pro
Hi list,
i'm compiling a program that uses the MPICH2-provided libraries.
However during installation i'm getting the following error:
/usr/lib/gcc/x86_64-pc-linux-gnu/4.1.1/../../../../lib64/libmpich.so:
undefined reference to `aio_read64'
/usr/lib/gcc/x86_64-pc-linux-gnu/4.1.1/../../../../lib
Hi Hans,
$ echo alias evbug off >> /etc/modules.d/my-aliases
$ update-modules
thanks this solution is working. Will this be the solution for the
future or a "blacklist" file will be reintroduced?
Cheers,
mc
--
gentoo-user@gentoo.org mailing list
Hi Hans,
well, you're correct. The other thing i had to change to have it
working is the ATTR --> ATTRS change.
Best regards,
mc
--
gentoo-user@gentoo.org mailing list
Hi Nelson,
Can you divert output to /dev/null?
Or cron a job that chops out all those errors?
Those are good ideas, but i'm questioning how is it possible to mark
stable a so important package that has such "improvements" over the
previous stable one, without good amplification of the changes
Hi users,
some days ago i've upgraded to udev-103 since it became stable.
However after this operation, as most of you know,
/etc/hotplug/blacklist stops working. There have been reportings on
this http://bugs.gentoo.org/show_bug.cgi?id=130766 but since now, no
reliable solution have been found
Hi,
emerge -euD world
but: is this going to recompile everything (e option) or only those
that needs upgrade?
Regards,
mc
--
gentoo-user@gentoo.org mailing list
Hi list,
i would like to remove prelink and put the system to the state it
has before the prelink procedure. I've read that a
# prelink -ua
can do the job but i would have some suggestions from you all. It is
enough to behave like this?
Regards,
mc
--
gentoo-user@gentoo.org mailing list
Hi list,
when trying to do an emerge world, the system tries to upgrade to
imlib2-1.3.0 from version 1.2(something). But during the configure
step, it comes to this error:
[..]
checking for i686-pc-linux-gnu-ar... i686-pc-linux-gnu-ar
checking for i686-pc-linux-gnu-ranlib... i686-pc-linux-g
Hi Alan,
well, sorry to all, it was my fault. you're completely right.
Regards,
mc
--
gentoo-user@gentoo.org mailing list
Hi list,
i have a question regarding the use of global environmental
variables: as root i've changed some variables inside /etc/env.d. I've
updated the database with env-update and sourced them with source
/etc/profile. For this changes to become available to all users i have
to issue a source /
Hi Iain,
I think it can depend on the driver. With some versions of ati-drivers,
the CPU is used to help the GPU, and I get great frame rates. With
other version of ati-drivers (including 8.28.8 and 8.29.6) the cpu
usages stays low for all 3d, and I get crap framerates...
don't know if this i
Hi,
On 10/29/06, Lord Sauron <[EMAIL PROTECTED]> wrote:
Be sure DRI is working. use glxinfo if you need to verify if it's active.
If you don't have DRI working, then most of the graphics will be done
on CPU. Or at least that's how my laptop did it.
well DRI in on and working:
display: :0 s
> I tkink its normal. I run beryl with NVidia driver and when I move a window or
> something the CPU goes up to 100% ...
PS: this makes my system a bit unresponsive when running heavy
applications like Firefox or OO
--
gentoo-user@gentoo.org mailing list
Hi Tomas,
I tkink its normal. I run beryl with NVidia driver and when I move a window or
something the CPU goes up to 100% ...
well, you're probably right since i've seen the same behaviour also in
other machines. But i'm asking myself if the GPU should not take care
of performing these operat
Hi list,
the slowness of AIGLX was due to the fact that i was running
xorg-server without enabling the aiglx flag. After having enabled it
xorg started running with AIGLX (using compiz or beryl).
Although the system is quite usable there is still an issue: i thought
the system would have relied c
I've tried following completelt the AIGLX guide
http://gentoo-wiki.com/HOWTO_AIGLX but without result. Actually the
nice effects are on, but it seems that the indirect acceleration is
not active
regards,
m
--
gentoo-user@gentoo.org mailing list
Hi Mike,
I am getting the same error, but with Fluxbox as my default WM I haven't tried
AIGLX. glxgears seem relatively slow comparatively to the old monolithic
xorg. I've posted about this error in an earlier message on xorg upgrade.
actually i'm getting better result on glxgears than befor
Hi all,
i've managed to install the radeon opensource drivers on my Radeon
9700 laptop (with also direct rendering enabled). However, whenever i
launch a 3D application the following error appears:
libGL warning: 3D driver claims to not support visual 0x4b
In addition to this i've tried to enab
From here https://bugs.freedesktop.org/show_bug.cgi?id=6689
it seems that this error should be purely "cosmetic".
Can someone confirm this?
Regards,
M
On 10/22/06, Marco Calviani <[EMAIL PROTECTED]> wrote:
Hi all,
i've managed to install the radeon opensource driv
Hi all,
i've managed to install the radeon opensource drivers on my Radeon
9700 laptop (with also direct rendering enabled). However, whenever i
launch a 3D application the following error appears:
libGL warning: 3D driver claims to not support visual 0x4b
In addition to this i've tried to ena
Hi gentooers,
i'm running a Centrino machine with an ATI Radeon Mobility 9700
card using the ATI proprietary driver. I would like then to try the
opensource (R300) driver, since this also supports the AIGLX
extensions (at least i think, http://gentoo-wiki.com/HOWTO_AIGLX).
However:
1) i don't u
Thanks Bo and Neil,
# echo $(python resume_list.py)
# emerge -va1 $(python resume_list.py)
both of your solutions solved my problem!
Thanks again,
mc
--
gentoo-user@gentoo.org mailing list
Hi Bo,
# python resume_list.py
should give you the resume list. Then you can alter the resulting list and
emerge the altered list with --oneshot ...
thanks for this. This script gave me the resume list. However i'm not
able to give the file to emerge... i've tried with emerge -1 <
resume.list
Hi list,
i was running an emerge -e world while emerge stuck on a package
(that was openinventor). The problem was that with the modular X, the
"testing" version was necessary. Now i would like to resume the emerge
process, but however with emerge --resume, Portage wants to install
the older ver
Right... It was supposed to look like this:
$ ls -ld /usr/lib*
lrwxrwxrwx 1 root root 5 2006-02-22 23:12 /usr/lib -> lib64
drwxr-xr-x 7 root root 4096 2006-10-02 07:16 /usr/lib32
drwxr-xr-x 63 root root 36864 2006-10-02 17:52 /usr/lib64
drwxr-xr-x 4 root root 4096 2006-10-02 01:49 /usr/l
Hi everybody,
the problem has been solved. See
http://bugs.gentoo.org/show_bug.cgi?id=149648
regards,
M
On 9/30/06, Marco Calviani <[EMAIL PROTECTED]> wrote:
Hi,
thanks but i've already tried to do that action, but without any luck.
However i've filed a b
Hi,
thanks but i've already tried to do that action, but without any luck.
However i've filed a bug #149648
http://bugs.gentoo.org/show_bug.cgi?id=149648
Regards,
Marco
On 9/30/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
On Saturday 30 September 2006 11:33, Marc
Hi,
i was trying to emerge -e system on my x86_64 box. However when it
comes to python-related packages it shows this error:
Emerging (1 of 1) dev-python/python-fchksum-1.7.1 to /
* python-fchksum-1.7.1.tar.gz MD5 ;-) ...
[ ok ]
* python-fchksum-1.7.1.tar.gz size ;-) ...
[ ok ]
* c
ote:
Le 10 septembre à 12:23:07 "Marco Calviani" <[EMAIL PROTECTED]> écrit notamment:
| Hi Jean,
>
| the result of
| $ dhcpcd -v LOG_DEBUG -d 2 eth1
| is
| Error, dhcpStart: ioctl SIOCGIFHWADDR: No such device
>
| even if iwconfig shows:
>
| eth1 unassociated
Hi Jean,
the result of
$ dhcpcd -v LOG_DEBUG -d 2 eth1
is
Error, dhcpStart: ioctl SIOCGIFHWADDR: No such device
even if iwconfig shows:
eth1 unassociated ESSID:"home"
Mode:Managed Channel=0 Access Point: 00:2C:F9:08:3B:6D
Bit Rate:0 kb/s Tx-Power=20 dBm Sensitivity
Hi,
i'm having problems with my since now working wireless. I'm running
on a 2.6.17-gentoo-r4 kernel with ipw2200-1.1.2-r1 and wpa_supplicant.
In particular when i start the net.eth1 service, it tells me:
Starting eth1
* Starting wpa_supplicant on eth1 ...
[ ok ]
* Start
Hi,
thank you for posting me your thoughts. I think it too that this
community is very active and producing a very productive distro.
Thanks guys,
Marco
On 6/30/06, Daniel da Veiga <[EMAIL PROTECTED]> wrote:
On 6/30/06, Marco Calviani <[EMAIL PROTECTED]> wrote:
> Hi list,
>
Hi list,
i've recently read this short article on distrowatch:
http://distrowatch.com/weekly.php?issue=20060626#news
What about these problems? Someone that's more inside the Gentoo
decision process, can explain better what's (if it is true) happening?
Best regards,
Marco
--
gentoo-user@gento
On 5/22/06, Enrico Weigelt <[EMAIL PROTECTED]> wrote:
* Alexander Skwar <[EMAIL PROTECTED]> wrote:
> Marco Calviani wrote:
> >Hi list,
> > i would like to know if anyone have had experiences in installing
> >gentoo on a remote machine using ssh. Is it possible?
>
Hi list,
i would like to know if anyone have had experiences in installing
gentoo on a remote machine using ssh. Is it possible?
Thanks in advance,
MC
--
gentoo-user@gentoo.org mailing list
Hi list,
i have a question regarding shfs. I'm use to connect a remote
computer (let's call it C) from a linux machine (A) via ssh passing
through a *nix gateway (B). I would like to be able to transfer data
from C to A as easy as possible. Since B works only as a gateway i'm
not able to save any
Hi all,
i've built gcc-4.0.3 from source including the gfortran compiler.
When i'm going to use the newly installed compiler with an external
configure program i'm getting the following error:
checking for gfortran libraries... configure: error: could not
determine how to set LDFLAGS for gfortra
Hi,
unfortunately this is not useful since it does not build the
gfortran compiler that include fortran 90 and 95.
Regards,
MC
2006/5/9, Rumen Yotov <[EMAIL PROTECTED]>:
Marco Calviani wrote:
> Hi all,
> i'm in the position of needing the fortran 90 compiler, that is not
I've found some gcc 4 binary package, that contains the following files:
cpp, gcc, gccbug, gcov, gfortran, i386-linux-gcc, i386-linux-gcc-4.2.0
and i386-linux-gfortran
but the program's configure file needs g95, ifc, ifort, pgf90, pfg95,
f90 and f95.
How can i do?
Regards,
MC
2006/
Hi all,
i'm in the position of needing the fortran 90 compiler, that is not
present in the current gcc implementation i'm running (that is
gcc-3.4.5)
# gcc -v
Reading specs from /usr/lib/gcc/i686-pc-linux-gnu/3.4.5/specs
Configured with:
/var/tmp/portage/gcc-3.4.5-r1/work/gcc-3.4.5/configure --
> well, this is a good question. Actually i'm not seeing any
> "incredible" boost in performance, excluding a reduced need of RAM
> memory.
>
I would like to add that these "extra" RAM saving is really very
useful in increase the responsiveness of all the system and thus
apparent "extra" speed
> AFAICT, this is the expected result. Without KDE_IS_PRELINKED or
> KDE_FORK_SLAVES you will see many more kdeinit processes.
yes of course, this is true a lot of more kdeinit processes...
> The real question is "is it faster?"
well, this is a good question. Actually i'm not seeing any
Hi Richard,
> No, not 'etc-update', 'env-update'. That is the command that takes
> all of the /etc/env.d/* settings and rolls them into /etc/profile.
yeah, of course i mispelled in the mail. i've actually made the
env-update..
> When you run 'env', do you see the KDE_IS_PRELINKED and
>
Hi Richard,
> Did you remember to run env-update?
>
> Even with this, KDE still loads some things through kdeinit or
> klauncher. For those, try setting KDE_FORK_SLAVES=1.
>
> http://docs.kde.org/development/en/kdebase/userguide/environment-variables.html
>
> -Richard
yes, i run etc-update. I've
Hi lists,
i've followed the gentoo prelink-howto
(http://www.gentoo.org/doc/en/prelink-howto.xml) and everything went
well during setup. I've also set KDE_IS_PRELINKED=1 in
/etc/env.d/99kde-env to inform KDE about the prelinking (and not
KDE_IS_PRELINKED="true"). This should (following the howto
t; to type FontStruct
Cannot convert string
"-*-courier-medium-o-normal-*-*-120-*-*-*-iso8859-1" to type
FontStruct
Regards,
MC
2006/3/15, Marco Calviani <[EMAIL PROTECTED]>:
> Hi list,
> i have problems when running programs as gv, ggv and other
> postscript viewer
Hi list,
i have problems when running programs as gv, ggv and other
postscript viewer (but also with xterm); everytime i start the
application this message appears:
Warning: Cannot convert string
"-*-Helvetica-Medium-R-Normal--*-140-*-*-P-*-ISO8859-1" to type
FontStruct
Warning: Cannot convert s
Hi Richard,
> > Where do they go when you do that? How do you use them later?
>
> They go into your PKGDIR directory (normally /usr/portage/packages).
>
> To use them later, specify the --usepkg/--usepkgonly options to
> emerge. For example, I currently have portage-2.1_pre3-r1 through
> portag
Hi list,
i would like to ask how to create a package of EVERY program
installed on the system, as a backup of everything.
Regards,
MC
--
gentoo-user@gentoo.org mailing list
> configuration error - unknown item 'FAILLOG_ENAB' (notify administrator)
> configuration error - unknown item 'LASTLOG_ENAB' (notify administrator)
> configuration error - unknown item 'MOTD_FILE' (notify administrator)
> configuration error - unknown item 'FTMP_FILE' (notify administrator)
> con
Hi list,
after becoming root in a normal user console i've got these errors:
configuration error - unknown item 'FAILLOG_ENAB' (notify administrator)
configuration error - unknown item 'LASTLOG_ENAB' (notify administrator)
configuration error - unknown item 'MOTD_FILE' (notify administrator)
c
Hi list,
i'm trying to build the ROOT object-oriented framework
(root.cern.ch) from scratch. Everything goes well but when i try to
load the program, before the program prompt, i'm observing the
following warning:
Couldn't find font "-adobe-helvetica-medium-r-*-*-10-*-*-*-*-*-iso8859-1",
tryin
Hi Holly, and thanks for your clear explanation,
> > Hi list, i would like to have clarification regarding the policy of
> > switching packages from testing to stable. Is this policy due to
> > particular bugs in the packages?
> >
> No. Gentoo's "stable" and "testing" refers to the /ebuilds/, not
Hi list,
i would like to have clarification regarding the policy of
switching packages from testing to stable. Is this policy due to
particular bugs in the packages?
Regards,
and thanks,
MC
--
gentoo-user@gentoo.org mailing list
Hi list,
i'm having big trouble in running emerge -e system after a gcc
upgrade (from gcc-3.4.4 to gcc-3.4.5. This is coming from dmesg:
[ cut here ]
kernel BUG at f (i < 5)
printk(":");
}
printk(".\n");
}
static void __ioc3_set_m
Hi list,
i have a machine with two SATA hard disk. I would like to know if
there are some possibilties to install windows (XP in particular) on
the second hard drive AFTER gentoo has been installed on the first
one, and, if yes, how to perform this task.
Best regards,
MC
--
gentoo-user@gentoo
Hi Jeff,
2006/3/1, Jeff <[EMAIL PROTECTED]>:
> http://gimp.org/
thanks for this. In fact i've used it and it is very nice. However i'm
searching for something easier and quicker to use.
Regards,
MC
--
gentoo-user@gentoo.org mailing list
Hi list,
i would like to know which program can be suited to create buttons
and graphic text to be used, for example, in web pages.
Many thanks,
MC
--
gentoo-user@gentoo.org mailing list
Hi list,
i would like to ask a question regarding the "portability" of an
application (i don't know if this term apply in this case):
i would like to compile locally an application (for example
kile-1.8.1) and then export it to another machine, with another linux
distro, not having to recompile a
Hi Richard,
> Those escape characters are recognized only by the getty program,
> which is used for console logins. You should still be able to use the
> color setting escape sequences, since those are terminal escapes. But
> the substitution stuff is getty specific, and will not work with ssh.
Hi list,
using this page of the gentoo wiki http://gentoo-wiki.com/TIP_Console_Prompt
i'm trying to use the /etc/issue file.
After having enabled the file in the /etc/ssh/sshd_config file with
Banner /etc/issue
file i've observed that effectively the system shows the "welcome" string.
However
Hi Boris,
> try grep GetChi *.C
poor me, this was very easy. It was my fault because man grep says it all.
Many thanks for your help Boris,
MC
--
gentoo-user@gentoo.org mailing list
Hi list,
i need to search for a particular string inside a list of text
files: i've thought of this very simple one:
cat *.C | grep GetChi
it works but however if the string is found it does not say in which
of the file it has been found.
Is there a simple way to do it?
Thanks in advance
thanks,
however no recovery is possible for ext3...
regards,
mc
2006/2/26, Alexander Skwar <[EMAIL PROTECTED]>:
> Marco Calviani wrote:
> > 2006/2/26, Marco Calviani <[EMAIL PROTECTED]>:
> >> Hi list,
> >> i've accidentally deleted some impo
2006/2/26, Marco Calviani <[EMAIL PROTECTED]>:
> Hi list,
> i've accidentally deleted some important files from my home
> directory. Are there some opensource program that can be used to
> recovery these data?
>
> Regards,
> MC
PS: i'm running on an ext3
Hi list,
i've accidentally deleted some important files from my home
directory. Are there some opensource program that can be used to
recovery these data?
Regards,
MC
--
gentoo-user@gentoo.org mailing list
1 - 100 of 163 matches
Mail list logo