Normally, the bridge works well. But everytime I execute
"/etc/init.d/net.br0 restart", the following error occurs:
* network interface br0 does not exist
* Please verify hardware or kernel module (driver)
[ !! ]
Then I execute such command one more tim
So do we keep TIMEZONE in conf.d/clock or delete it?
There is no /etc/conf.d/clock anymore in openrc/baselayout 2.0.
The openrc file is called /etc/conf.d/hwclock, and there's no TIMEZONE
variable in that file.
Hi,
have you noticed the hal update?
It just informed me about some trouble concerning my keyboard-layout.
Keyboards as well as mice are now added automatically to xorg (and the
evdev driver is used - hooray! always wanted to use evdev).
Yet, they are always added with us keyboard layout. So
To avoid automounting and autoinstalling with /boot,
just export the DONT_MOUNT_BOOT variable.
Which /boot partition? I don't have any ...
If there's a setup-command in your grub.conf, it is indeed executed.
So if that command is outdated (something you won't notice, since that
command is no
When you emerged grub-0.97-r5, this was displayed on your console:
WARN: postinst
*** IMPORTANT NOTE: you must run grub and install
the new version's stage1 to your MBR. Until you do,
stage1 and stage2 will still be the old version, but
later stages will be the new version, which could
cause prob
(Portage is a little dated at 1.2.9)
http://sourceforge.net/projects/rkhunter/
Thanks for the info but this doesn't belong here. The proper thing to do
would be to open a bug on http://bugs.gentoo.org and request a version
bump.
Like this one: http://bugs.gentoo.org/show_bug.cgi?id=194832
With the kernel's own 2.6.25, my "dmesg|grep -i drm" says:
Apr 23 17:43:08 bert kernel: [drm] Initialized drm 1.1.0 20060810
Apr 23 17:43:08 bert kernel: [drm] Initialized i915 1.6.0 20060119 on
minor 0
Yep, I'm using it (and the kernel module) and I get the same output of
"dmesg | grep drm"
I
is somebody using the package x11-base/x11-drm for intel's integrated
graphics?
I'd like to see the output of "dmesg |grep -i drm" to see, of i actually
have some advanatge of using it.
With the kernel's own 2.6.25, my "dmesg|grep -i drm" says:
Apr 23 17:43:08 bert kernel: [drm] Initialized drm
Hi,
is somebody using the package x11-base/x11-drm for intel's integrated
graphics?
I'd like to see the output of "dmesg |grep -i drm" to see, of i actually
have some advanatge of using it.
With the kernel's own 2.6.25, my "dmesg|grep -i drm" says:
Apr 23 17:43:08 bert kernel: [drm] Initializ
Suddenly I noticed I'm on the bleeding edge. I don't know why.
The latest: emerge -aDvu world is emerging unstable k3b-1.0.4. At least if
I'm reading the output of eix correctly, it's unstable.
I don't have anything in ACCEPT_KEYWORDS (it's not defined).
In all of /etc/portage there are 4 refere
>> Samba 3.0.24 works like charm. Just switched back to it.
>
> But watch out, it has a huge security problem:
> http://www.gentoo.org/security/en/glsa/glsa-200711-29.xml
Yeah, but i've got no time right now, to analyse the problems with 3.0.27a.
I've run it in debug mode and so on - but i found
>> In addition, the mount.cifs binary is missing. So i cannot mount via
>> CIFS anymore. Samba ebuild is VERY broken :-(
>
> The ebuild is not broken, you just didn't read what it told you
>
> "The mount/umount.cifs helper applications are not included anymore.
> Please install net-fs/mount-cifs
> Hi. I just tried to update to the new "stable" samba 3.025c and noticed two
> problems:
>
> - the init script does not work (known bug #191647)
>
> - after fixing the init script, the Windows box (XP SP2) can no longer
> connect to shared directories despite the new server being visible and
> b
> Hi. I am having a very frustrating prroblem when I use the pppoe
> plugin like so:
>
> config_ppp0=("ppp")
> link_ppp0="eth2"
> plugins_ppp0=("rp-pppoe")
> username_ppp0='vzeqmmst'
> pppd_ppp0=(
> "updetach"
> "noauth"
> "ipcp-accept-remote"
> "ipcp-accept-local"
> "holdoff 3"
> "lcp-echo-inter
Hi,
any tipps on setting up a mailserver with postfix, cyrus-imapd and
postgresql?
Actually, a web-frontend would be nice.It seems, that the web-cyradm
projects stopped living some years ago :-(
Does anybody run a complete and easy to configure sollution for
SMTP+IMAP based on Gentoo?
T
> Does anybody knows what had happened to: http://gentoo-wiki.com ?
And http://www.gentoo-portage.com/
signature.asc
Description: OpenPGP digital signature
>>>emerge gnome fails. Does anyone recognize what portage is
>>> complaining about here?
>> I'm not really sure, but I solved it by reemerging dev-perl/XML-Parser.
expat has been updated. Some Apps are now broken. They have to
recompiled to link against the new libexpat.
For me, it was gettex
I am curious, though: If you like the sysklogd
> layout to the point that you want to replicate it exactly in other log
> daemons, why do you want to switch log daemons?
Last sysklogd version if from 2001.
And portage contains 1.4.2_pre2007* versions. This was curious to me.
And on the other hand
Hi,
so until recently, i have been using sysklogd. So i had my auth.log,
mail.log, syslog, messages, etc. in /var/log.
Now i switched to syslog-ng. Now, only /var/log/messages gets filled
with all, that i would expect in auth.log or mail.log.
Maybe syslog-ng can be configured to behave like sysk
Hi,
i switched to the no-mutilib profile.
Then, i emerged glibc and gcc.
After that whole thing, i tried to reboot:
But the link at /lib pointing to /lib64 was missing.
I don't which step exactly removed it. But it's not good!
Without the link, the system won't boot :-(
Just wanted to let you
> trying to update my system , glib is broken
>
> here is the output
Seems like a libtool problem. Please try to update libtool, and then try
to update glib again.
Maybe that works.
signature.asc
Description: OpenPGP digital signature
> is it possible to monitor SATA disks with smart?
> sys-apps/smartmontools can not read smart on that disks.
You have to tell smartmontools, that it's actually an ATA disk. SATA
devices show up as SCSI devices, but the protocol is still ATA.
So this can be done with the "-d ata" switch - also see
> As I understand it a good WLAN device driver will associate and re-associate
> with the next available device when it comes into range. Some drivers are
> not that good at re-associating.
Right, but just imagine you close the laptop in the university and open
it at home again.
There is no suc
>> is there any "WLAN daemon" that scans for wireless LANs and loggs into
>> them, if he finds one, that i prefer?
>
> Maybe wifi-radar fits your needs!
I think, it's "just" an application - a frontend. What i would prefer,
is really a daemon running as root in background, scanning for networks,
Hi,
is there any "WLAN daemon" that scans for wireless LANs and loggs into
them, if he finds one, that i prefer?
Thanks,
Sven
signature.asc
Description: OpenPGP digital signature
> So as you can see, one database must be broken or in wrong format.
> But i have NO idea, which one it is.
OK, it was the database in /var/imap/db.
Deleted all files in that directory, and now everything's fine again.
I wonder, what i broke by doing this. Anyway: all my mails are still there.
Hi,
any ideas, why my cyrus-imapd isn't working anymore?
In /var/log/imapd.log is says:
Apr 1 19:21:27 gwinet master[25000]: process started
Apr 1 19:21:27 gwinet master[25004]: about to exec
/usr/lib/cyrus/ctl_cyrusdb
Apr 1 19:21:27 gwinet ctl_cyrusdb[25004]: DBERROR àÓ^F^H: db4
Apr 1 19:21:
>> I put evolution in /etc/portage/profile/package.provided.
>>
>> Then portage assumes, that it is installed ba hand and therefor it's not
>> installed installed automatically.
>>
>> Unfortunatly, you still have to install eveolution-data-server and
>> evolution-webcal, because it's a hard-depende
> Any suggestions?
I put evolution in /etc/portage/profile/package.provided.
Then portage assumes, that it is installed ba hand and therefor it's not
installed installed automatically.
Unfortunatly, you still have to install eveolution-data-server and
evolution-webcal, because it's a hard-depend
Hi,
my vmware doesn't work anymore :-(
I have no clue about the cause - maybe my update to 2.6.20 or perhaps bus?
# vmware
/opt/vmware/workstation/lib/bin/vmware:
/opt/vmware/workstation/lib/lib/libpng12.so.0/libpng12.so.0: no version
information available (required by /usr/lib/libcairo.so.2)
p
> I would like to have Xen to run unmodified OS (Windows, and some other
> Linuces). I know Linux may be ran Xen-aware, but the goal is to
> experiment some kernel packaging, so that I need to use the distribution
> kernel.
> I got the FC5 isos.
> I made a file "/etc/xen/fc5-guest.cfg" (see attache
> I would like to have Xen to run unmodified OS (Windows, and some other
> Linuces). I know Linux may be ran Xen-aware, but the goal is to
> experiment some kernel packaging, so that I need to use the distribution
> kernel.
> I got the FC5 isos.
> I made a file "/etc/xen/fc5-guest.cfg" (see attache
> I recently set up a Core 2 duo system. Following the AMD64 howto, the
> system now works. Kernel compilation took 1:40 minutes passing -j6 to
> make.
>
> Then I tried to bunzip a large file and found out that the machine was
> about 40 % in idle which is clear because bzip2 is only one process.
> If it is a hard-requirement, you'll get "blah depends on java which is
> hardmasked" and your emerge will die.
I think, that what's Q wants.
signature.asc
Description: OpenPGP digital signature
»Q« schrieb:
> Is there a simple way to make sure java never gets installed on a
> gentoo machine? The only thing I've thought of is
> using /etc/portage/package.mask to mask everything in the dev-java
> category, but I'm hoping for something simpler.
>
disable java use-flag.
mask virtual/jdk, v
>>> I do not understand/know how the choice of mirrors work either. I
>>> noticed that when I rsync from home I always hit the same mirror
>>> (first time). When I rsync from work (using the same laptop) I
>>> always hit a different specific mirror (again first time).
>> it's not portage!
>> it's
> I do not understand/know how the choice of mirrors work either. I noticed
> that when I rsync from home I always hit the same mirror (first time). When
> I rsync from work (using the same laptop) I always hit a different specific
> mirror (again first time).
it's not portage!
it's rsync!!!
Hi,
"emerge --sync" should sync with rsync.gentoo.org, to which many IP
adresses (5 at the moment).
Here's what host says:
# host rsync.gentoo.org
rsync.gentoo.org has address 129.79.6.73
rsync.gentoo.org has address 134.68.220.73
rsync.gentoo.org has address 134.68.220.74
rsync.gentoo.org has ad
> It will be included in 2.6.20 kernel, as it seems. But it's not in
> 2.6.19.1 :-(
But it will be in 2.6.19.2 - hooray!
signature.asc
Description: OpenPGP digital signature
Hi,
i attached a patch. See comments #70 and #72 of this bug:
https://bugs.gentoo.org/show_bug.cgi?id=149307
from where i got it, and so on ...
It fixes the sandbox violations with vanilla 2.6.19 kernel.
It will be included in 2.6.20 kernel, as it seems. But it's not in
2.6.19.1 :-(
I thought,
> Hmm - I don't have this issue - what version of alsa-utils are you
> running? I'm running 1.0.13. I don't even have a /etc/init.d/coldplug
> init script on my system - maybe you need to do an emerge -C coldplug?
> Maybe if the coldplug script doesn't exist then alsasound won't
> complain about it
>> do you know, what's going on at present in kernel development? We had
>> libata based SATA drivers for a few kernel-versions now.
>> Since 2.6.19, we seem to be offered libata based PATA drivers too!
>>
>> Why are they doing it? Does this make any sense to you? The new drivers
>> don't replace t
Hi,
do you know, what's going on at present in kernel development? We had
libata based SATA drivers for a few kernel-versions now.
Since 2.6.19, we seem to be offered libata based PATA drivers too!
Why are they doing it? Does this make any sense to you? The new drivers
don't replace the old ones,
> this is a really strange issue i'm having:
>
> i changed the motherboard, nothing else. I know have a K8T800Pro based
> motherboard. The old one was SiS-chipset based.
>
> So i was already running the vesa frambuffer at 1280x1024, 16-bit. And
> actually it worked perfect!
>
> No, after the swi
Hi,
this is a really strange issue i'm having:
i changed the motherboard, nothing else. I know have a K8T800Pro based
motherboard. The old one was SiS-chipset based.
So i was already running the vesa frambuffer at 1280x1024, 16-bit. And
actually it worked perfect!
No, after the switch to the VI
> When I run revdep-rebuild, it reports a bunch (around 100) breakages
> involving
> early kde *.la files, but then it reports that
> Dynamic linking on your system is consistent... All done.
Old *.la files are broken. They have not been unmerged. That's a known
bug, because some gentoo-tools have
Hi,
do you have the same problems?
When hald is running, it seems to access the dvd-drive on a regular
basis. That means, that the drive doesn't spin down :-(
signature.asc
Description: OpenPGP digital signature
> I looked at this tool. It allows me to patch the bios table w/ resolution and
> bpp value - but not with the rest of the mode line timings. How can I change
> that?
It seems, that you can't.
All the Linux-stuff is using the BIOS to switch modes. Also see this page:
http://intellinuxgraphics.o
> I am running gentoo kernel 2.6.15-r1
> I recently updated xorg, and installed the new nvidia-drivers package.
> Xorg now appears to be horribly broken.
> The nvidia splash screen appears, then it faults out back to the command line.
Can you tell us, which nvidia related ebuild you have installed
> After I updated to the latest xorg-server this weekend, I started
> noticing that movie playback has a horizontal line across the middle
> of the screen that kind of looks like the image is broken. It always
> shows up when there is a lot of on-screen movement. A flash makes it
> very visible.
Hi,
do you guys know any possibility to detect, whether the nx-bit is
effectively enabled and being used?
I'm passing "noexec=on" and even "noexec32=on" to the kernel. But i want
to check whether it really changes something.
Any ideas?
Thanks,
Sven
signature.asc
Description: OpenPGP digita
> bridge_xenbr1=" "
> config_xenbr1=(
> "192.168.0.1/24"
> )
> brctl_xenbr1=(
> "setfd 0"
> "sethello 0"
> "stp off"
> )
Hmm, forget about my question. Exactly the configuration above works
fine now.
signature.asc
Description: OpenPGP digital signature
Hi,
i'm trying to create a bridge, but without interfaces! The interfaces
will be added by xend. When i put the following in /etc/conf.d/net,
baselayout just complains "xenbr1 does not exist".
bridge_xenbr1=" "
config_xenbr1=(
"192.168.0.1/24 brd 192.168.0.255"
)
brctl_xenbr1=(
"s
>> i already has openssl 0.9.8c installed. OpenSSH worked fine. Then, there
>> was a new ebuild with had an sse2 useflag. So i installed it, but i
>> didn't recompile openssh. Now, ssh and sshd do segfault! Do you have the
>> same issue? I already had this issue on 2 PCs.
>
>> I have to recompile
>> i already has openssl 0.9.8c installed. OpenSSH worked fine. Then, there
>> was a new ebuild with had an sse2 useflag. So i installed it, but i
>> didn't recompile openssh. Now, ssh and sshd do segfault! Do you have the
>> same issue? I already had this issue on 2 PCs.
>>
>> I have to recompile
Hi,
i already has openssl 0.9.8c installed. OpenSSH worked fine. Then, there
was a new ebuild with had an sse2 useflag. So i installed it, but i
didn't recompile openssh. Now, ssh and sshd do segfault! Do you have the
same issue? I already had this issue on 2 PCs.
I have to recompile OpenSSH. The
> I was handed what seems to be a corrupt xD flash card to extract the last
> photo from it. When the WinXP system at work coughed and died on it
> (couldn't read it) I thought that my Linux would do better. Anyhow, I've
> inserted it into my Fuji camera and this is what dmesg shows:
>
>
> I got a core duo machine with an intel motherboard with the 965 chip
> set. There is a sata HD and ide DVD. The installation disk fails to
> boot since the jernel does not recognize the dvd. I tried the following
> bios configurations:
> * switch between ahci and ide
> * switch between legacy
> Can anybody on this list indicate what kind of stability they have seen
> with AMD64 systems using Gentoo (the AMD 64-bit binaries)? How about
> the majority of ports in the portage tree?
>
> I realize this question will solicit relatively subjective responses,
> but I am interested in them all
Hi,
is there any of the big distributions like SuSE, Fedora or Debian who
use glibc 2.4 too? And if they do, do they also only include a
nptlonly-glibc?
Just wondering.
Sven
signature.asc
Description: OpenPGP digital signature
> 2) Do I put grub on the Gentoo boot partition and then do the standard
> chain load to Win XP? If this is the case then which partitions should
> be marked as bootable?
AFAIK, grub can only be put into the MBR of a disk. anything like
"grub-install /dev/hda1" just will not work. Only something l
> few years later I setup a environment which shares the /home using
> NFS for the users and the authentication method was NIS. Is this still
> the best solution?
> My current environment is based on LDAP where all services use it. I
> configured PAM+NSSwitch, Postfix, and so on. Now, I want linu
>> The problem is the gcc package not only delivers the gcc compiler package,
>> but also some libraries. Further, gcc 4.1.x compiled programs are
>> not quite compatible with gcc 3.x compiled programs -
>> when you compile a lib with 4.x and still have 3.x compiled pgms around.
>> You really shoul
Hi,
sorry for the silly subject, but did you ever experience the following?:
i have a fileserver, i copy a file to it - let's say 600MB.
So about every 200MB (i guess the linux box writes the data into the
cache in the RAM first) linux writes the harddisk. But during that time
- during the time
> my gentoo just suprised me with the following:
>
> gwinet linux # pwd
> /usr/src/linux
> gwinet linux # make all
> [...] some strange error
>
>
> Hooray!
Hmmm, did a "make clean" and then a "make all" - and now it works
without problems. Strange ...
signature.asc
Description: OpenPGP digit
Hi!,
my gentoo just suprised me with the following:
gwinet linux # pwd
/usr/src/linux
gwinet linux # make all
/bin/sh: -c: line 0: syntax error near unexpected token `('
/bin/sh: -c: line 0: `set -e; echo ' CHK include/linux/version.h';
mkdir -p include/linux/;if [ `echo -n "2.6.17.3
> Thanks... and I'm probably mis-understanding something here but I
> don't see `java' as a USE flag that gcc knows anything about:
>
> emerge -vp gcc
>
> These are the packages that would be merged, in order:
>
> Calculating dependencies... done!
> [ebuild R ] sys-devel/gcc-4.1.1 USE="for
> emerge --pretend --update --deep --newuse world
> [blocks B ] sys-apps/utempter (is blocking sys-libs/libutempter-1.1.2.1)
> [blocks B ] sys-apps/pam-login (is blocking sys-apps/shadow-4.0.15-r2)
> [ebuild N ] sys-libs/libutempter-1.1.2.1
> [ebuild U ] x11-terms/xterm-212-r3 [207]
> [ebuild U ] s
>>> The old rp-pppoe init script works without problems on my up-to-date
>>> gentoo router. I prefer this way, too.
>> Nobody needs the old init.d-script anymore.
>
> Perhaps we don´t need it, but we like to use it.
>
> The OP said he wanted to use the script. If he wants to use that, it´s his
>
> The old rp-pppoe init script works without problems on my up-to-date
> gentoo router. I prefer this way, too.
Nobody needs the old init.d-script anymore. Here are the advantages of
using baselayout:
- you can unmerge rp-pppoe
- the pppoe-plugin provided by pppd uses the kernel PPPoE-implementat
> I was using the (nowadays) old "/etc/init.d/rp-pppoe" script to
> start/stop my adsl connection, but I did an "emerge world" without
> looking at the messages that now the "net" script should handle all
> possible types of connection, so now I don't know how to configure it.
config_ppp0=( "ppp"
> I just can't understand why "emerge -- depclean" such a dangerous
> command can exist or i do it in a wrong way(although i think i am
> right).
Have you seen the big fat warning that says "emerge --depclean may
damage your system" ?
"--depclean" is a nice service for advanced users. It's nothin
>> (But i have to tell you, that even if you recompiled all the packages,
>> some *.la files will remain. They don't get unmerged due to some bugs.
>> Just rerun revdep-rebuild to discover them, and remove them my hand.)
>
> It is usually because you have run fix_libtool_files.sh at some point,
>
> And still I get this. Any ideas?
Upgrade to gentoolkit 0.2.2 and run revdep-revbuild. It now also
analyses *.la files and will discover the broken ones.
(But i have to tell you, that even if you recompiled all the packages,
some *.la files will remain. They don't get unmerged due to some bugs.
> Calculating world dependencies . ... done!
>
> [blocks B ] sys-apps/pam-login (is blocking sys-apps/shadow-4.0.15-r2)
>
> Do I need to remove sys-apps/shadow? I thought that was part of system?
unmerge pam-login and update shadow
signature.asc
Description: OpenPGP digital si
> //192.168.0.2/Temp /mnt/temp smbfs
> user,uid=smash,gid=users,password= 0 0
smbfs? No, that's not clever. Better use cifs ;-)
signature.asc
Description: OpenPGP digital signature
> Thanks Remy. That's exactly what I need. No need for x11 on a server only
> system!
If you don't want X, then disable all X-related use-flags. The java
use-flag is _not_ X related, since all JRE/JDK ebuilds (at least those,
that i now) won't install X if the right use-flags are disabled.
javac
>> But but rsync still makes my harddisk glow, too many small files
>
> Use the right filesystem: Reiserfs.
I already used reiserfs and now i'm using ext3. There was not much
difference.
signature.asc
Description: OpenPGP digital signature
> So, thank you, Portage Devs. You've made my Gentoo experience nearly 100%
> enjoyable.
But but rsync still makes my harddisk glow, too many small files
signature.asc
Description: OpenPGP digital signature
> Sorry - I thought it was clear from my description. Everyone is
> using the word 'unicode' in the definition of 'unicode', or so it is
> seeming to me. I've managed to get far enough to understand it's a
> different way of expressing font usage, I guess, but I don't
> understand when someone wo
> I wonder if anyone could explain the USE flag 'unicode' better than
> the Gentoo description located here:
>
> http://www.gentoo.org/dyn/use-index.xml
>
> unicode Adds support for Unicode
>
> I think the person who wrote this knows too much. ;-)
>
> What is unicode and why might an
> I was wondering if someone could show me where to look information to
> enable DRI/GLX on a ATI X300 PCI Express video board.
>
> I was wanting to test some 3d games, but without enableing DRi is just
> impossible.
What's the problem? emergeing ati-drivers doesn't work?
--
gentoo-user@gentoo.o
> From doing a google, it looks like i need to run
>
> emerge sync
>
> in order to fix this. However, if I could sync then I wouldn't be
> doing this. Everytime I try to sync it times out and I never finish.
> I'm on dial-up, so it's a bit slow. I am trying to install
> emerge-delta-webrsync a
> In my recent experience the frequent changes to the
> xorg7 versions in portage are getting pretty hairy. I
> have been constantly adding things to package.keywords
> and package.unmask every time I do a world upgrade.
> And then it got 1000 times worse...
xorg 7.0 is ~x86 - no need to unmask th
> I have a new sony lappy with a ipw2200 chipset mini wireless card.
> Should I be using the in kernel (2.6.16-r3) drivers or the builds in
> portage? Is the a configuration guide for this setup on gentoo?
I would use the ebuilds. You're much more flexible that way in the case,
that you experienc
> Yesterday I updated from glibc-2.4-r1 to glibc-2.4-r2. Since then,
> I've got problems with my UTF-8 locale. I suppose, that is because
> the UTF-8 denomination seems to have changed from .UTF-8 to .utf8:
.UTF-8 changed from .utf8?
That's not true. My glibc 2.3.6 (with userlocales turned off) n
> Sorry for the big post. I solved by emerging the 1.1.0 version, which is
> hard masked at the moment.
Hmm, that 1.1.x versions are part of xorg-x11 7.1 i guess - i wouldn't
use 7.1 material with xorg 7.0 - well, perhaps it works without
problems, so you might prove me wrong.
signature.asc
Des
> Ummm, could you please explain those settings? Or could you please point
> me the appropriate documentation where they're explained?
which settings?
well, "man pppd" should show you all the funny pppd options.
--
gentoo-user@gentoo.org mailing list
> Anyway, so a related query.. My internet connection has a habit of
> getting disconnected every six hours. Does the kernel mode PPPoE
> automatically reconnect properly? Well, if it doesn't, how do I start
> and stop the connection at will? Restart the init script?
config_ppp9=( "ppp" )
plugi
> (1) Why rp-pppoe is deprecated?
ppp included the pppoe-plugin known from rp-pppoe. the pppoe-plugin uses
the kernel-mode PPPoE. There is no need for rp-pppoe anymore, because
ppp offers everything needed.
> (2) Every time I call /etc/init.d/net.ppp0 there is a warning saying
> that "net.ppp0 is
> Gentoo does use rp-pppoe to connect. It just does it when bringing up
> eth0 directly.
No, since baselayout-1.12*, gentoo uses ppp and ppp's pppoe-plugin.
rp-pppoe is not needed anymore!
--
gentoo-user@gentoo.org mailing list
> that is the point, i recompiled after xorg-server update, and before too if
> that matters ;)
I see!
So perhaps the ATI-driver is only for xorg up to version 7.0?
signature.asc
Description: OpenPGP digital signature
> after xorg-server update fglrx driver wont work, even after (re)emerge,
> should
> i file a bug? any suggesions? now i see option to downgrade where i was
> before, yes and X just crashed with xorg ati drivers.
>
> from Xorg.0.log:
>
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "f
Hi,
i have a normal DSL-connection. My provider only supplies a IPv4 address
- and so my ppp0 does not have a IPv6 address. The IPv4 of ppp0 address
changes every 24 hours.
So i'd like to be abled to use IPv6 from my LAN which sits behind my
Gentoo-based DSL router.
I think, that 6to4 would be r
Hi,
how can i disable IPv6 for my eth1-interface?
In my /etc/conf.d/net, i only specify the IPv4 address, but the kernel
or baselayout adds that local-link address to the interface. But i don't
want an IPv6 address for that interface.
/etc/conf.d/net.example doesn't tell anything about it, just
>> Do you know tools, that can convert reiserfs to ext3 or the other way
>> round? I have forgotten the name of the tool that i once read about :-(
>
> mkfs, but make sure you have a backup. *SCNR*
No risk, no fun!
signature.asc
Description: OpenPGP digital signature
>> Do you know tools, that can convert reiserfs to ext3 or the other way
>> round? I have forgotten the name of the tool that i once read about :-(
>
> http://tzukanov.narod.ru/convertfs/
> And i'm running it right now ... oh oh ...
Yes! my Gentoo had just gone to hell!
Don't use convertfs ;-)
-
> Do you know tools, that can convert reiserfs to ext3 or the other way
> round? I have forgotten the name of the tool that i once read about :-(
http://tzukanov.narod.ru/convertfs/
And i'm running it right now ... oh oh ...
--
gentoo-user@gentoo.org mailing list
Hi,
i once read about a tool to convert a reiserfs to ext3 - but without
using to much additional space. Instead, that tool claimed to use a
sparse-file within the original filesystem to create the new filesystem
by moving the files to new FS contained in the sparse file.
Do you know tools, that
> I still cannot get X to start with the nvidia drivers. However, I did take
> (someones?) suggestion and tried both the "vesa" and "nv" drivers and they
> both "work". I say "work" because with 'vesa', I get a HUGE (i.e. low rez)
> screen = unuseable. And with the 'nv' I get the right resolution 1
1 - 100 of 130 matches
Mail list logo
