Re: [gentoo-user] update fails, but I don't see why
On Fri, 4 Dec 2020 at 21:24, n952162 wrote: > > I guess you mean, remove them all and then let emerge tell me which ones > > I need. I'll try that. But isn't '=' more restrictive than '>=', > > promising me troubles earlier? The earlier you encounter any conflicts, they're generally easier to solve. > No, that didn't work. After about 4 iterations of supplying newly > required USE flags, I ended up with this > > (this after commenting out all the python dependencies in > /etc/portage/package.use/* and adding back in what emerge wanted): Hard to say what the problem is when I don't know what you've added back to USE, but I wonder what state your portage tree is in, because it seems like many of the packages creating your conflicts, like the two below, dev-python/ipaddress and dev-python/futures, don't exist at all in my tree. They were removed several weeks ago. When did you last sync? If recently, when did you last --depclean? > dev-python/setuptools[python_targets_python2_7(-),-python_single_target_python2_7(-)] > required by (dev-python/ipaddress-1.0.23:0/0::gentoo, installed) USE="" > ABI_X86="(64)" PYTHON_TARGETS="python2_7" > > dev-python/setuptools[python_targets_python2_7(-),-python_single_target_python2_7(-)] > required by (dev-python/futures-3.1.1:0/0::gentoo, installed) USE="-doc" > ABI_X86="(64)" PYTHON_TARGETS="python2_7" Regards, Arve
Re: [gentoo-user] update fails, but I don't see why
On 12/4/20 10:49 PM, Arve Barsnes wrote: On Fri, 4 Dec 2020 at 21:24, n952162 wrote: I guess you mean, remove them all and then let emerge tell me which ones I need. I'll try that. But isn't '=' more restrictive than '>=', promising me troubles earlier? The earlier you encounter any conflicts, they're generally easier to solve. No, that didn't work. After about 4 iterations of supplying newly required USE flags, I ended up with this (this after commenting out all the python dependencies in /etc/portage/package.use/* and adding back in what emerge wanted): Hard to say what the problem is when I don't know what you've added back to USE, but I wonder what state your portage tree is in, because it seems like many of the packages creating your conflicts, like the two below, dev-python/ipaddress and dev-python/futures, don't exist at all in my tree. They were removed several weeks ago. When did you last sync? If recently, when did you last --depclean? dev-python/setuptools[python_targets_python2_7(-),-python_single_target_python2_7(-)] required by (dev-python/ipaddress-1.0.23:0/0::gentoo, installed) USE="" ABI_X86="(64)" PYTHON_TARGETS="python2_7" dev-python/setuptools[python_targets_python2_7(-),-python_single_target_python2_7(-)] required by (dev-python/futures-3.1.1:0/0::gentoo, installed) USE="-doc" ABI_X86="(64)" PYTHON_TARGETS="python2_7" Regards, Arve Okay, I've never done a depclean. Is that something I need to do? I mean, I'm always worried it'd remove something that I need, but given all the problems I have, I guess that'd be the lesser of evils... I'll give that a go and go to bed.
[gentoo-user] tried to compile tensorflow again:
tortoise ~ # emerge tensorflow
[...]
The following USE changes are necessary to proceed:
??(see "package.use" in the portage(5) man page for more details)
# required by sci-libs/tensorflow-1.13.0_rc2::gentoo
# required by tensorflow (argument)
>=sci-visualization/tensorboard-1.13.1 -python_targets_python3_7
[...]
So I opened the tensorboard ebuild to answer the question WTF???
PYTHON_COMPAT=( python2_7 python3_{5,6,7} )
inherit python-r1 python-utils-r1
DESCRIPTION="TensorFlow's Visualization Toolkit"
HOMEPAGE="https://www.tensorflow.org/;
SRC_URI="https://files.pythonhosted.org/packages/0f/39/bdd75b08a6fba41f098b6cb091b9e8c7a80e1b4d679a581a0ccd17b10373/${P}-py3-none-any.whl
-> ${P}.zip"
LICENSE="Apache-2.0"
SLOT="0"
KEYWORDS="~amd64"
IUSE=""
RDEPEND="
?? dev-python/bleach[${PYTHON_USEDEP}]
?? dev-python/grpcio[${PYTHON_USEDEP}]
?? dev-python/html5lib[${PYTHON_USEDEP}]
?? dev-python/markdown[${PYTHON_USEDEP}]
?? dev-python/numpy[${PYTHON_USEDEP}]
?? dev-python/protobuf-python[${PYTHON_USEDEP}]
?? dev-python/six[${PYTHON_USEDEP}]
?? dev-python/werkzeug[${PYTHON_USEDEP}]
?? dev-python/wheel[${PYTHON_USEDEP}]
?? virtual/python-futures[${PYTHON_USEDEP}]"
BDEPEND="app-arch/unzip"
PDEPEND="sci-libs/tensorflow[python,${PYTHON_USEDEP}]"
This looks like it should be good for any of python2.7, and
Python3.5-3.7 inclusive...
So where the hell is that error message coming from, I am powerfully
disinclined to muck with my python settings right now, especially when
everything else is basically working...
--
Please report bounces from this address to a...@numentics.com
Powers are not rights.
[gentoo-user] To be updated or not to be updated, Second Part
Hi,
after updateing I got this as result:
* Copying old database to /var/cache/eix/previous.eix
* Running eix-update
Reading Portage settings ..
Building database (/var/cache/eix/portage.eix) ..
[0] gentoo /usr/portage/ (cache: metadata-md5-or-flat)
Reading category 159|159 (100%) Finished
Applying masks ..
Calculating hash tables ..
Writing database file /var/cache/eix/portage.eix ..
Database contains 16845 packages in 159 categories.
* Calling eix-diff
Diffing databases (16844 - 16845 packages)
[D] == x11-libs/fox (1.7.39(1.7)@08/07/13; (~*)1.7.39(1.7) - *1.6.40(1.6)
*1.6.45(1.6) ~*1.6.49(1.6) ~*1.7.40(1.7) ~*1.7.41(1.7)): C++ based Toolkit for
developing Graphical User Interfaces easily and effectively
dev-python/python-quantumclient (~*2.2.3): A client for the OpenStack
Quantum API
[N]dev-java/jopt-simple (~*4.4(4.4) ~*4.5(4.5)): A Java library for
parsing command line options
[N]virtual/python-futures (~*0): A virtual for the Python
concurrent.futures module
* Time statistics:
287 seconds for syncing
117 seconds for eix-update
14 seconds for eix-diff
423 seconds total
These are the packages that would be merged, in reverse order:
Calculating dependencies... done!
Total: 0 packages, Size of downloads: 0 kB
Nothing to merge; quitting.
--
beagleboneblack:/rooteix x11-libs/fox
[D] x11-libs/fox
Available versions:
(1.6) *1.6.40 *1.6.45 ~*1.6.49
(1.7) ~*1.7.40 ~*1.7.41
{(+)bzip2 debug doc (+)jpeg (+)opengl (+)png profile tiff (+)truetype
(+)zlib}
Installed versions: 1.7.39(1.7)(23:22:36 08/07/13)(bzip2 jpeg opengl png
truetype zlib -debug -doc -profile -tiff)
Homepage:http://www.fox-toolkit.org/
Description: C++ based Toolkit for developing Graphical User
Interfaces easily and effectively
So, what is about x11-libs/fox? Delete it? Dont delete it?
Best regards,
mcc
Re: [gentoo-user] [WAY OT] GUI programming for Linux (and Windows possibly)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Mark Knecht wrote: Hi, I know this is WAY off topic for this list but there's a lot of smart, experienced people here so I figured I'd look for a little guidance and then possibly join another email list that's more appropriate. These days I'm trading stock index futures for a living. I have data files that I analyze in Excel over the weekend to help me make decisions about how to trade the coming week, but I'm always fighting Excel as it really isn't intended for the sort of math I want to do. The math's not difficult, but I need to look at various ranges, manage, sort and extract data from arrays, and amd then create charts. This is getting pretty difficult in Excel these days so I've started to wonder about writing a simple app to do what I need to do. It's not generally difficult stuff but it requires (or I prefer) a lot of small charts. I'm vaguely familiar with C Pascal, but haven't programmed in years. I don't know C++ at all. I was trained as an EE. So the main question is what sort of language (and possibly programming environment) should a complete novice look at to get his feet wet with GUI programming. I'd like something fairly light - performance probably won't be a huge problem - that I could run under Cygwin or maybe compile to run native in Windows should that ever become useful. For now it's probably a relatively simple Linux app that I'd likely run once a week on Saturday morning on 15 to 20 databases I collect on Friday night. If you can recommend a good list or forum for silly folks like me - know nothing about programming and have to ask lots os stupid beginner questions - I'd greatly appreciate that also. #friendly-coders on freenode is full of friendly people. Depending on how much effort you are willing to put in, I would probably suggest looking at some form of macro set for a spreadsheet (Excel and OO Calc both use basic variants, Gnumeric has a python interpreter.) Another possibility if you don't need much interactivity on the GUI would be to create a script + C-mini-app using GnuPlot to generate your graphs. Just a few thoughts... Rob. -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkpHrWMACgkQZr0UhZgPVmyffgCg97gheECMbXqdhH640aGkxuWM fjoAoOwNt9vD+uNIt/iENZ0svkSR6B+4 =I+WH -END PGP SIGNATURE-
Re: [gentoo-user] update fails, but I don't see why
You seem to not really understand how gentoo works. On 2020.12.04 17:19, n952162 wrote: On 12/4/20 11:13 PM, n952162 wrote: On 12/4/20 10:49 PM, Arve Barsnes wrote: On Fri, 4 Dec 2020 at 21:24, n952162 wrote: I guess you mean, remove them all and then let emerge tell me which ones I need. I'll try that. But isn't '=' more restrictive than '>=', promising me troubles earlier? The earlier you encounter any conflicts, they're generally easier to solve. No, that didn't work. After about 4 iterations of supplying newly required USE flags, I ended up with this (this after commenting out all the python dependencies in /etc/portage/package.use/* and adding back in what emerge wanted): Hard to say what the problem is when I don't know what you've added back to USE, but I wonder what state your portage tree is in, because it seems like many of the packages creating your conflicts, like the two below, dev-python/ipaddress and dev-python/futures, don't exist at all in my tree. They were removed several weeks ago. When did you last sync? If recently, when did you last --depclean? dev-python/setuptools[python_targets_python2_7(-),-python_single_target_python2_7(-)] required by (dev-python/ipaddress-1.0.23:0/0::gentoo, installed) USE="" ABI_X86="(64)" PYTHON_TARGETS="python2_7" dev-python/setuptools[python_targets_python2_7(-),-python_single_target_python2_7(-)] required by (dev-python/futures-3.1.1:0/0::gentoo, installed) USE="-doc" ABI_X86="(64)" PYTHON_TARGETS="python2_7" Regards, Arve Okay, I've never done a depclean. Is that something I need to do? I mean, I'm always worried it'd remove something that I need, but given all the problems I have, I guess that'd be the lesser of evils... Most of the time, yes, you do need to do a depclean. It's pretty common to do it after every world update. In general, it gets rid of things emerged as a dependency of something else, and no longer needed, either because you explicitly removed what pulled them in, or that package was modified to no longer need it. I'll give that a go and go to bed. Oh that went fast. But just as I expected ... it's going to remove kernel/gentoo-sources? gcc? The llvm that took 5 hours to compile? Do you understand why it shows separate lines for "selected" and "omitted" >>> These are the packages that would be unmerged: sys-kernel/gentoo-sources selected: 4.19.72 protected: none omitted: 5.4.72 It's going to remove an old version and leave a newer version. If you really want the old one kept, you should explicitly add it to your world file. (check "emerge -n", don't actually edit the world file) dev-lang/mujs selected: 1.0.5 protected: none omitted: none sys-fs/btrfs-progs selected: 4.19 protected: none omitted: none virtual/shadow selected: 0 protected: none omitted: none media-libs/gegl selected: 0.3.34 protected: none omitted: 0.4.22 dev-python/sphinx_rtd_theme selected: 0.2.4 protected: none omitted: none dev-go/blackfriday selected: 1.2_p20150720 protected: none omitted: none media-gfx/mypaint-brushes selected: 1.3.0-r1 protected: none omitted: 2.0.2 dev-lang/vala selected: 0.42.7 protected: none omitted: 0.48.9 x11-drivers/xf86-video-nouveau selected: 1.0.16 protected: none omitted: none media-gfx/potrace selected: 1.15 protected: none omitted: none x11-drivers/xf86-video-dummy selected: 0.3.8 protected: none omitted: none sys-apps/sdparm selected: 1.10 protected: none omitted: none dev-python/sphinxcontrib-websupport selected: 1.1.0 protected: none omitted: none dev-lang/vala selected: 0.46.7 protected: none omitted: 0.48.9 virtual/python-ipaddress selected: 1.0-r1 protected: none omitted: none sys-kernel/gentoo-sources selected: 5.4.66 protected: none omitted: 5.4.72 Same as above, and no, I don't know why it didn't combine these into a single entry with two selected and one omitted. dev-python/bz2file selected: 0.98 protected: none omitted: none dev-python/asn1crypto selected: 0.22.0 protected: none omitted: none app-text/docbook-dsssl-stylesheets selected: 1.79-r4 protected: none omitted: none x11-drivers/xf86-video-vesa selected: 2.4.0 protected: none omitted: none x11-libs/wxGTK selected: 3.0.4-r2 protected: none omitted: 3.0.4-r302 !!! 'app-editors/nano' (virtual/editor) is part of your system profile. !!! Unmerging it may be damaging to your system. app-editors/nano selected: 4.2 protected: none omitted: none This seems a bit odd, unless you have a different app-editor package installed. Virutal/editor is there so you always have at le
Re: [gentoo-user] update fails, but I don't see why
On 12/4/20 11:13 PM, n952162 wrote: On 12/4/20 10:49 PM, Arve Barsnes wrote: On Fri, 4 Dec 2020 at 21:24, n952162 wrote: I guess you mean, remove them all and then let emerge tell me which ones I need. I'll try that. But isn't '=' more restrictive than '>=', promising me troubles earlier? The earlier you encounter any conflicts, they're generally easier to solve. No, that didn't work. After about 4 iterations of supplying newly required USE flags, I ended up with this (this after commenting out all the python dependencies in /etc/portage/package.use/* and adding back in what emerge wanted): Hard to say what the problem is when I don't know what you've added back to USE, but I wonder what state your portage tree is in, because it seems like many of the packages creating your conflicts, like the two below, dev-python/ipaddress and dev-python/futures, don't exist at all in my tree. They were removed several weeks ago. When did you last sync? If recently, when did you last --depclean? dev-python/setuptools[python_targets_python2_7(-),-python_single_target_python2_7(-)] required by (dev-python/ipaddress-1.0.23:0/0::gentoo, installed) USE="" ABI_X86="(64)" PYTHON_TARGETS="python2_7" dev-python/setuptools[python_targets_python2_7(-),-python_single_target_python2_7(-)] required by (dev-python/futures-3.1.1:0/0::gentoo, installed) USE="-doc" ABI_X86="(64)" PYTHON_TARGETS="python2_7" Regards, Arve Okay, I've never done a depclean. Is that something I need to do? I mean, I'm always worried it'd remove something that I need, but given all the problems I have, I guess that'd be the lesser of evils... I'll give that a go and go to bed. Oh that went fast. But just as I expected ... it's going to remove kernel/gentoo-sources? gcc? The llvm that took 5 hours to compile? >>> These are the packages that would be unmerged: sys-kernel/gentoo-sources selected: 4.19.72 protected: none omitted: 5.4.72 dev-lang/mujs selected: 1.0.5 protected: none omitted: none sys-fs/btrfs-progs selected: 4.19 protected: none omitted: none virtual/shadow selected: 0 protected: none omitted: none media-libs/gegl selected: 0.3.34 protected: none omitted: 0.4.22 dev-python/sphinx_rtd_theme selected: 0.2.4 protected: none omitted: none dev-go/blackfriday selected: 1.2_p20150720 protected: none omitted: none media-gfx/mypaint-brushes selected: 1.3.0-r1 protected: none omitted: 2.0.2 dev-lang/vala selected: 0.42.7 protected: none omitted: 0.48.9 x11-drivers/xf86-video-nouveau selected: 1.0.16 protected: none omitted: none media-gfx/potrace selected: 1.15 protected: none omitted: none x11-drivers/xf86-video-dummy selected: 0.3.8 protected: none omitted: none sys-apps/sdparm selected: 1.10 protected: none omitted: none dev-python/sphinxcontrib-websupport selected: 1.1.0 protected: none omitted: none dev-lang/vala selected: 0.46.7 protected: none omitted: 0.48.9 virtual/python-ipaddress selected: 1.0-r1 protected: none omitted: none sys-kernel/gentoo-sources selected: 5.4.66 protected: none omitted: 5.4.72 dev-python/bz2file selected: 0.98 protected: none omitted: none dev-python/asn1crypto selected: 0.22.0 protected: none omitted: none app-text/docbook-dsssl-stylesheets selected: 1.79-r4 protected: none omitted: none x11-drivers/xf86-video-vesa selected: 2.4.0 protected: none omitted: none x11-libs/wxGTK selected: 3.0.4-r2 protected: none omitted: 3.0.4-r302 !!! 'app-editors/nano' (virtual/editor) is part of your system profile. !!! Unmerging it may be damaging to your system. app-editors/nano selected: 4.2 protected: none omitted: none sys-kernel/gentoo-sources selected: 5.4.60 protected: none omitted: 5.4.72 x11-drivers/xf86-video-intel selected: 2.99.917_p20190301 protected: none omitted: none dev-python/pyxattr selected: 0.6.0-r1 protected: none omitted: none sys-devel/clang-runtime selected: 10.0.0 protected: none omitted: 10.0.1 app-admin/metalog selected: 20181125 protected: none omitted: none sys-libs/cracklib selected: 2.9.7 protected: none omitted: none dev-libs/iniparser selected: 3.1-r1 protected: none omitted: none dev-libs/libcroco selected: 0.6.13 protected: none omitted: none x11-drivers/xf86-input-mouse selected: 1.9.3 protected: none omitted: none virtual/python-enum34 selected: 2 protected: none omitted: none x11-drivers/xf86-video-fbdev selected: 0.5.0 protected: none omitted: none media-libs/freeglut selected: 3.2.1 protected: none omitted:
Re: [gentoo-user] [WAY OT] GUI programming for Linux (and Windows possibly)
On Sun, Jun 28, 2009 at 10:50 AM, Robert Bridgerob...@robbieab.com wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Mark Knecht wrote: Hi, I know this is WAY off topic for this list but there's a lot of smart, experienced people here so I figured I'd look for a little guidance and then possibly join another email list that's more appropriate. These days I'm trading stock index futures for a living. I have data files that I analyze in Excel over the weekend to help me make decisions about how to trade the coming week, but I'm always fighting Excel as it really isn't intended for the sort of math I want to do. The math's not difficult, but I need to look at various ranges, manage, sort and extract data from arrays, and amd then create charts. This is getting pretty difficult in Excel these days so I've started to wonder about writing a simple app to do what I need to do. It's not generally difficult stuff but it requires (or I prefer) a lot of small charts. I'm vaguely familiar with C Pascal, but haven't programmed in years. I don't know C++ at all. I was trained as an EE. So the main question is what sort of language (and possibly programming environment) should a complete novice look at to get his feet wet with GUI programming. I'd like something fairly light - performance probably won't be a huge problem - that I could run under Cygwin or maybe compile to run native in Windows should that ever become useful. For now it's probably a relatively simple Linux app that I'd likely run once a week on Saturday morning on 15 to 20 databases I collect on Friday night. If you can recommend a good list or forum for silly folks like me - know nothing about programming and have to ask lots os stupid beginner questions - I'd greatly appreciate that also. #friendly-coders on freenode is full of friendly people. Depending on how much effort you are willing to put in, I would probably suggest looking at some form of macro set for a spreadsheet (Excel and OO Calc both use basic variants, Gnumeric has a python interpreter.) Another possibility if you don't need much interactivity on the GUI would be to create a script + C-mini-app using GnuPlot to generate your graphs. Just a few thoughts... Rob. -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkpHrWMACgkQZr0UhZgPVmyffgCg97gheECMbXqdhH640aGkxuWM fjoAoOwNt9vD+uNIt/iENZ0svkSR6B+4 =I+WH -END PGP SIGNATURE- Actually I'm liking the suggest to try using R. I have already managed to read my data files using the read.csv function. When I understand headers and tables better I'll likely be able to make my plots from that data pretty easily. It's cross platform so it solves that problem and keeps me focused on where I might add value - evaluating the market data - and not worrying about how to program in C or Python. Open to other ideas but this one is looking pretty good to me so far. Thanks, Mark
Re: [gentoo-user] update fails, but I don't see why
On 12/4/20 9:00 PM, n952162 wrote: On 12/4/20 8:52 PM, n952162 wrote: On 12/4/20 11:07 AM, Arve Barsnes wrote: On Fri, 4 Dec 2020 at 10:34, n952162 wrote: Forgotten about? I'm flattered! That would imply I understood something here ... Here's my python situation: $ sed -n -e '/^\s*#/d' -e '/python/Ip' * | sort -u */* PYTHON_TARGETS: python3_7 >=dev-lang/python-2.7.16:2.7 sqlite >=dev-lang/python-3.6.9 sqlite >=dev-libs/libxml2-2.9.9-r1 python >=dev-python/PySocks-1.7.1 python_targets_python3_6 >=dev-python/certifi-10001-r1 python_targets_python3_7 >=dev-python/certifi-2019.11.28 python_targets_python3_6 >=dev-python/cffi-1.14.0 python_targets_python3_6 >=dev-python/chardet-3.0.4 python_targets_python3_6 >=dev-python/cryptography-2.8-r1 python_targets_python3_6 >=dev-python/docutils-0.16 -python_targets_python2_7 >=dev-python/idna-2.8 python_targets_python3_6 >=dev-python/isodate-0.6.0-r1 python_targets_python3_6 >=dev-python/ply-3.11 python_targets_python3_6 >=dev-python/pycparser-2.20 python_targets_python3_6 >=dev-python/pycryptodome-3.9.4 python_targets_python3_6 >=dev-python/pyopenssl-19.1.0 python_targets_python3_6 >=dev-python/requests-2.23.0 python_targets_python3_6 >=dev-python/setuptools-46.4.0-r1 python_targets_python3_6 >=dev-python/setuptools-50.3.0 python_targets_python3_7 >=dev-python/setuptools_scm-4.1.2-r1 python_targets_python3_6 >=dev-python/setuptools_scm-4.1.2-r1 python_targets_python3_7 >=dev-python/six-1.14.0 python_targets_python3_6 >=dev-python/six-1.15.0-r1 python_targets_python3_7 >=dev-python/urllib3-1.25.8 python_targets_python3_6 >=virtual/python-cffi-0 python_targets_python3_6 dev-lang/python readline net-print/cups X python I would try simply removing all of those python_targets_python3_x lines, and add back only those that you actually need, with an explicit version (that is '=' instead of '>='). I had a long list of packages on 3_6 for a while, but it's been several weeks/months since I could remove them all. Regards, Arve How would I know which ones I need? Aren't those specified by the package author based on special needs? Otherwise, why would they be specified, instead of left to default? I can understand that if I have two packages depending on different versions of the same dependency, the older one is probably left over from an earlier update and could be removed ... although at first glance, I don't see that situation here. I guess you mean, remove them all and then let emerge tell me which ones I need. I'll try that. But isn't '=' more restrictive than '>=', promising me troubles earlier? No, that didn't work. After about 4 iterations of supplying newly required USE flags, I ended up with this (this after commenting out all the python dependencies in /etc/portage/package.use/* and adding back in what emerge wanted): These are the packages that would be merged, in order: Calculating dependencies * IMPORTANT: 9 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS * sections of the emerge man page to learn how to update config files. .. .. done! [ebuild U ] sys-libs/timezone-data-2020d::gentoo [2020a::gentoo] USE="nls -leaps-timezone -zic-slim%" 647 KiB [ebuild U ] sys-devel/gcc-config-2.3.2-r1::gentoo [2.3.2::gentoo] USE="(cc-wrappers%*) (native-symlinks)" 0 KiB [ebuild U ] dev-lang/go-1.15.5:0/1.15.5::gentoo [1.14.9:0/1.14.9::gentoo] 22480 KiB [ebuild U ] app-text/poppler-data-0.4.10::gentoo [0.4.9::gentoo] 4393 KiB [ebuild U ] sys-devel/llvm-common-11.0.0::gentoo [10.0.1::gentoo] 119867 KiB [ebuild N ] acct-group/pcap-0::gentoo 0 KiB [ebuild r U ] dev-libs/liblinear-241:0/4::gentoo [210-r1:0/3::gentoo] 547 KiB [ebuild U ] x11-misc/util-macros-1.19.2-r2::gentoo [1.19.2-r1::gentoo] 0 KiB [ebuild U ] dev-util/boost-build-1.74.0::gentoo [1.72.0::gentoo] USE="-examples" 107032 KiB [ebuild N ] acct-user/pcap-0::gentoo 0 KiB [ebuild U ] app-shells/push-3.4::gentoo [2.0-r1::gentoo] 3 KiB [ebuild U ] app-emulation/docker-proxy-0.8.0_p20201105::gentoo [0.8.0_p20200617::gentoo] 3307 KiB [ebuild U ] dev-lang/mujs-1.0.9:0/1.0.9::gentoo [1.0.5:0/0::gentoo] USE="-static-libs" 121 KiB [ebuild U ] virtual/tmpfiles-0-r1::gentoo [0::gentoo] 0 KiB [ebuild U ] app-admin/mcelog-173::gentoo [170::gentoo] USE="(-selinux)" 306 KiB [ebuild U ] dev-libs/boost-1.74.0-r1:0/1.74.0::gentoo [1.72.0-r2:0/1.72.0::gentoo] USE="bzip2 nls threads zlib -context -debug -doc -icu -lzma -mpi (-numpy) -python -static-libs -tools -zstd" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python3_7 python3_8* -python3_6 -python3_9%" 0 KiB [ebuild U ] media-libs/libpng-1.6.37-r
[gentoo-user] update fails, but I don't see why
I'm trying to update the gentoo system that I last updated 6 weeks ago, but it seems not to work. Can somebody explain to me why? These are the packages that would be merged, in order: Calculating dependencies * IMPORTANT: 9 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS * sections of the emerge man page to learn how to update config files. .. ... . ... done! [ebuild U ] sys-libs/timezone-data-2020d::gentoo [2020a::gentoo] USE="nls -leaps-timezone -zic-slim%" 647 KiB [ebuild U ] sys-devel/gcc-config-2.3.2-r1::gentoo [2.3.2::gentoo] USE="(cc-wrappers%*) (native-symlinks)" 0 KiB [ebuild U ] dev-lang/go-1.15.5:0/1.15.5::gentoo [1.14.9:0/1.14.9::gentoo] 22480 KiB [ebuild U ] app-text/poppler-data-0.4.10::gentoo [0.4.9::gentoo] 4393 KiB [ebuild U ] sys-devel/llvm-common-11.0.0::gentoo [10.0.1::gentoo] 119867 KiB [ebuild N ] acct-group/pcap-0::gentoo 0 KiB [ebuild r U ] dev-libs/liblinear-241:0/4::gentoo [210-r1:0/3::gentoo] 547 KiB [ebuild U ] x11-misc/util-macros-1.19.2-r2::gentoo [1.19.2-r1::gentoo] 0 KiB [ebuild U ] dev-util/boost-build-1.74.0::gentoo [1.72.0::gentoo] USE="-examples" 107032 KiB [ebuild N ] acct-user/pcap-0::gentoo 0 KiB [ebuild U ] app-shells/push-3.4::gentoo [2.0-r1::gentoo] 3 KiB [ebuild U ] app-emulation/docker-proxy-0.8.0_p20201105::gentoo [0.8.0_p20200617::gentoo] 3307 KiB [ebuild U ] dev-lang/mujs-1.0.9:0/1.0.9::gentoo [1.0.5:0/0::gentoo] USE="-static-libs" 121 KiB [ebuild U ] virtual/tmpfiles-0-r1::gentoo [0::gentoo] 0 KiB [ebuild U ] app-admin/mcelog-173::gentoo [170::gentoo] USE="(-selinux)" 306 KiB [ebuild U ] dev-libs/boost-1.74.0-r1:0/1.74.0::gentoo [1.72.0-r2:0/1.72.0::gentoo] USE="bzip2 nls threads zlib -context -debug -doc -icu -lzma -mpi (-numpy) -python -static-libs -tools -zstd" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python3_8* -python3_6 -python3_7* -python3_9%" 0 KiB [ebuild U ] media-libs/libpng-1.6.37-r2:0/16::gentoo [1.6.37:0/16::gentoo] USE="apng -static-libs (-neon%)" ABI_X86="(64) -32 (-x32)" CPU_FLAGS_X86="sse" 0 KiB [ebuild U ] dev-libs/mpc-1.2.1:0/3::gentoo [1.2.0:0/3::gentoo] USE="-static-libs" ABI_X86="(64) -32 (-x32)" 820 KiB [ebuild U ] sys-libs/libseccomp-2.4.4::gentoo [2.4.3::gentoo] USE="-static-libs" ABI_X86="(64) -32 (-x32)" 591 KiB [ebuild R ] sys-apps/file-5.39-r3::gentoo USE="bzip2 seccomp zlib -lzma -python -static-libs" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python3_8* -python3_6 -python3_7* -python3_9" 0 KiB [ebuild R ] app-misc/pax-utils-1.2.6::gentoo USE="seccomp -caps -debug -python" PYTHON_SINGLE_TARGET="python3_8* -python3_6 -python3_7* -python3_9%" 0 KiB [ebuild U ] sys-apps/sandbox-2.20::gentoo [2.18::gentoo] ABI_X86="(32) (64) (-x32)" 419 KiB [ebuild U ] app-emulation/containerd-1.3.9::gentoo [1.3.7::gentoo] USE="cri seccomp -apparmor -btrfs -device-mapper -hardened (-selinux) -test" 5584 KiB [ebuild U ] sys-apps/sysvinit-2.97::gentoo [2.93::gentoo] USE="(-ibm) (-selinux) -static" 124 KiB [ebuild U ] dev-libs/libusb-1.0.23-r1:1::gentoo [1.0.21-r1:1::gentoo] USE="(split-usr) -debug -doc -examples -static-libs -test -udev" ABI_X86="(64) -32 (-x32)" 589 KiB [ebuild U ] net-analyzer/iptraf-ng-1.2.1::gentoo [1.1.4-r1::gentoo] USE="-doc" 318 KiB [ebuild U ] sys-apps/less-563-r1::gentoo [551::gentoo] USE="pcre unicode" 328 KiB [ebuild U ] media-libs/libsndfile-1.0.30::gentoo [1.0.29_pre2_p20191024::gentoo] USE="-alsa -minimal -sqlite -static-libs -test" ABI_X86="(64) -32 (-x32)" 833 KiB [ebuild U ] app-text/qpdf-10.0.4:0/28::gentoo [9.0.2:0/26::gentoo] USE="ssl%* -doc -examples -libressl% -test (-perl%) (-static-libs%)" 18033 KiB [ebuild U ] sys-devel/clang-common-11.0.0::gentoo [10.0.1::gentoo] 0 KiB [ebuild U ] dev-qt/qtnetwork-5.15.1-r1:5/5.15::gentoo [5.15.1:5/5.15::gentoo] USE="ssl -bindist -connman -debug -gssapi -libproxy -libressl -networkmanager -sctp -test" 0 KiB [ebuild U ] sys-apps/man-pages-5.08::gentoo [5.07::gentoo] L10N="-de -fr -it -ja -nl -pl -ru -zh-CN" 1682 KiB [ebuild R ] media-libs/netpbm-10.76.00::gentoo USE="X jbig jpeg png postscript tiff zlib -doc -rle -static-libs (-svga) -xml" CPU_FLAGS_X86="sse2" 0 KiB [ebuild U ] net-misc/netifrc-0.7.1-r1::gentoo [0.7.1::gentoo] 0 KiB [ebuild U ] sys-apps/attr-2.4.48-r4::gentoo [2.4.48-r3::gentoo] USE="nls (split-usr) -debug -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB [ebuild U ] sys-apps/acl-2.2.53-r1::gentoo [2.2.
