Re: [gentoo-user] PyQt4-4.5 and pykde4-4.2.4 blockers
On Wed, Jun 10, 2009 at 2:25 PM, Alan McKinnonalan.mckin...@gmail.com wrote: Today's sync includes PyQt4-4.5 which is blocked by pykde4-4.2.4 (incompatible and build issues). Apparently pykde4-4.3 will fix this, but meanwhile I need to get emerge world to run and complete. I had to add these 4 packages to my /etc/portage/package.mask to get emerge to proceed: =dev-python/PyQt4-4.5 =dev-python/PyQt-3.18 =dev-python/qscintilla-python-2.4 =x11-libs/qscintilla-2.4 I'll try unmasking them in a few days to see if the deps have been sorted out.
Re: [gentoo-user] Trying KDE-4
On Wednesday 22 October 2008 12:10:15 Daniel Pielmeier wrote: 2008/10/22 Alex Schuster [EMAIL PROTECTED]: I think I have the same conflict. I just solved it by putting this into package.keywords: ~dev-python/PyQt4-4.4.3 ~dev-python/sip-4.7.7 [...] This is maybe the PyQt issue I did not remember. So I think it is worth a try. If this is the case portage tries to pull qt-4.4.3 because it is needed by PyQt-4.4 plus the qt split ebuilds which are needed by some other packages. So putting versions of PyQt and sip in package.keywords which depemd on qt split ebuilds should solve it. If I remember right I have this entries in my package.keywords too. Probably you need oneshot for PyQt and sip too. I've found another way around it on my fresh test system. I had a working KDE-3.5 system installed on it and upgraded it to version 4, no problem. Then I tried to install hplip on it and got the same blockers again. By a process of elimination I found I had to put two entries in package.use: =dev-python/qscintilla-python-2.1 -qt4 =x11-libs/qscintilla-2.1-r1 -qt4 Then I could install hplip as well. Now I'm back on the original system, and putting Alex's package.keywords entries in I find I still have the blockers; his solution isn't working for me, even after reinstalling PyQt4 and sip. Neither is my own on this system. But then I'm getting what looks like nonsense from equery, thus: # equery h qt4 [ Searching for USE flag qt4 in all categories among: ] * installed packages [I--] [ ] dev-python/qscintilla-python-2.1 (0) [I--] [ ] net-print/hplip-2.8.6b (0) [I--] [ ] x11-libs/qscintilla-2.1-r1 (0) [I--] [ ] app-text/poppler-bindings-0.8.7 (0) ...but equery u qscintilla and equery u qscintilla-python both return this line: - - qt4 : Adds support for the Qt GUI/Application Toolkit version 4.x So unless I'm misunderstanding the output of equery as well, the qt4 USE flag both is and is not in use in the two scintilla packages. After writing the above, I uninstalled hplip and poppler-bindings, then reinstalled poppler-bindings and ran revdep-rebuild. That hasn't helped either. -- Rgds Peter
Re: [gentoo-user] Trying KDE-4
Peter Humphrey schrieb am 22.10.2008 18:42: Now I'm back on the original system, and putting Alex's package.keywords entries in I find I still have the blockers; his solution isn't working for me, even after reinstalling PyQt4 and sip. Neither is my own on this system. But then I'm getting what looks like nonsense from equery, thus: # equery h qt4 [ Searching for USE flag qt4 in all categories among: ] * installed packages [I--] [ ] dev-python/qscintilla-python-2.1 (0) [I--] [ ] net-print/hplip-2.8.6b (0) [I--] [ ] x11-libs/qscintilla-2.1-r1 (0) [I--] [ ] app-text/poppler-bindings-0.8.7 (0) ...but equery u qscintilla and equery u qscintilla-python both return this line: - - qt4 : Adds support for the Qt GUI/Application Toolkit version 4.x So unless I'm misunderstanding the output of equery as well, the qt4 USE flag both is and is not in use in the two scintilla packages. Why is this nonsense? equery h shows which installed packages have the given use flag regardless if it is set or not. equery u shows you which use flags are set or unset for the given package. After writing the above, I uninstalled hplip and poppler-bindings, then reinstalled poppler-bindings and ran revdep-rebuild. That hasn't helped either. Please post again the output from emerge -pvutND world but attach it in a file so it doesn't get crippled by the mail program. Also what I have seen from your previous tree output is that you are trying to do many things at one time. Upgrading to kde4 changing and changing many use flags. This makes debugging very hard. Try to do only one thing at a time Regards, Daniel
Re: [gentoo-user] PyQt4-4.5 and pykde4-4.2.4 blockers
On Wednesday 10 June 2009 21:38:25 Paul Hartman wrote: On Wed, Jun 10, 2009 at 2:25 PM, Alan McKinnonalan.mckin...@gmail.com wrote: Today's sync includes PyQt4-4.5 which is blocked by pykde4-4.2.4 (incompatible and build issues). Apparently pykde4-4.3 will fix this, but meanwhile I need to get emerge world to run and complete. I had to add these 4 packages to my /etc/portage/package.mask to get emerge to proceed: =dev-python/PyQt4-4.5 =dev-python/PyQt-3.18 =dev-python/qscintilla-python-2.4 =x11-libs/qscintilla-2.4 I'll try unmasking them in a few days to see if the deps have been sorted out. I'd pretty much come to the same conclusion - couldn't figure out what the packages did and didn't feel like experimenting. Easier to keep things as is and wait for pykde4-4.3 -- alan dot mckinnon at gmail dot com
[gentoo-user] Multiple instances of PyQt4
Hi there! My @world update shows this problem: !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: dev-python/PyQt4:0 ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r5', 'merge') pulled in by =dev-python/PyQt4-4.4.0[X] required by ('installed', '/', 'kde- base/plasma-workspace-4.2.4', 'nomerge') dev-python/PyQt4[X] required by ('installed', '/', 'media- sound/picard-0.11', 'nomerge') =dev-python/PyQt4-4.4 required by ('ebuild', '/', 'dev- python/qscintilla-python-2.3.2-r2', 'merge') (and 1 more) ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r2', 'merge') pulled in by =dev-python/PyQt4-4.4.4-r1[dbus,qt3support,svg,webkit,X] required by ('ebuild', '/', 'kde-base/pykde4-4.2.4', 'merge') (and 4 more) I would like to understand where the problem is. The bottom says that pykde4-4.2.4 needs at least PyQt4-4.4.4-r2. This is fine, I can see the corresponding DEPEND line in the pykde4-4.2.4 ebuild. The top list tells that: plasma-workspace-4.2.4 needs PyQt4-4.4.0, picard-0.11needs PyQt4 and qscintilla-python-2.3.2-r2 needs PyQt4-4.4 Why then is PyQt4-4.4.4-r5 needed? -r2 should satisfy these needs, too, doesn't it? Or is the problem the 'and 1 more' line? How would I find out which other package would need -r5 then? And why would the other line be listed then? I don't get this. I grepped for PyQt4-4.4.4-r5 through all ebuilds, it appeared only in the PyQt4-4.4.4-r5.ebuild itself. This is not an important problem - I think I can unmask some stuff and it will work. But wanted to cut the amount of masking down a little, and I'm just curious why this happens. So, thanks for any insights, if want to practice your portage-fu, but don't bother if you have more important things to do, I'm fine :) Wonko
Re: [gentoo-user] PyQt4-4.5 and pykde4-4.2.4 blockers
On Wed, Jun 10, 2009 at 1:11 PM, Alan McKinnonalan.mckin...@gmail.com wrote: On Wednesday 10 June 2009 21:38:25 Paul Hartman wrote: On Wed, Jun 10, 2009 at 2:25 PM, Alan McKinnonalan.mckin...@gmail.com wrote: Today's sync includes PyQt4-4.5 which is blocked by pykde4-4.2.4 (incompatible and build issues). Apparently pykde4-4.3 will fix this, but meanwhile I need to get emerge world to run and complete. I had to add these 4 packages to my /etc/portage/package.mask to get emerge to proceed: =dev-python/PyQt4-4.5 =dev-python/PyQt-3.18 =dev-python/qscintilla-python-2.4 =x11-libs/qscintilla-2.4 I'll try unmasking them in a few days to see if the deps have been sorted out. I'd pretty much come to the same conclusion - couldn't figure out what the packages did and didn't feel like experimenting. Easier to keep things as is and wait for pykde4-4.3 -- alan dot mckinnon at gmail dot com Take a look at emerge -DuN world and see if they are still blocked. I had a problem like this yesterday on my AMD64 machine. Wasn't able to do emerge -DuN @system without lots of blockage problems but was able to do emerge -DuN @world with none... - Mark
Re: [gentoo-user] PyQt4-4.5 and pykde4-4.2.4 blockers
On Wednesday 10 June 2009 22:57:38 Mark Knecht wrote: On Wed, Jun 10, 2009 at 1:11 PM, Alan McKinnonalan.mckin...@gmail.com wrote: On Wednesday 10 June 2009 21:38:25 Paul Hartman wrote: On Wed, Jun 10, 2009 at 2:25 PM, Alan McKinnonalan.mckin...@gmail.com wrote: Today's sync includes PyQt4-4.5 which is blocked by pykde4-4.2.4 (incompatible and build issues). Apparently pykde4-4.3 will fix this, but meanwhile I need to get emerge world to run and complete. I had to add these 4 packages to my /etc/portage/package.mask to get emerge to proceed: =dev-python/PyQt4-4.5 =dev-python/PyQt-3.18 =dev-python/qscintilla-python-2.4 =x11-libs/qscintilla-2.4 I'll try unmasking them in a few days to see if the deps have been sorted out. I'd pretty much come to the same conclusion - couldn't figure out what the packages did and didn't feel like experimenting. Easier to keep things as is and wait for pykde4-4.3 -- alan dot mckinnon at gmail dot com Take a look at emerge -DuN world and see if they are still blocked. I had a problem like this yesterday on my AMD64 machine. Wasn't able to do emerge -DuN @system without lots of blockage problems but was able to do emerge -DuN @world with none... It's emerge -uND world that shows the problem. I'll resync tomorrow and try again - my mirror runs about 12 hours behind gentoo.org -- alan dot mckinnon at gmail dot com
Re: [gentoo-user] Multiple instances of PyQt4
On Tuesday 21 July 2009 17:11:33 Alex Schuster wrote: Hi there! My @world update shows this problem: !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: dev-python/PyQt4:0 ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r5', 'merge') pulled in by =dev-python/PyQt4-4.4.0[X] required by ('installed', '/', 'kde- base/plasma-workspace-4.2.4', 'nomerge') dev-python/PyQt4[X] required by ('installed', '/', 'media- sound/picard-0.11', 'nomerge') =dev-python/PyQt4-4.4 required by ('ebuild', '/', 'dev- python/qscintilla-python-2.3.2-r2', 'merge') (and 1 more) ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r2', 'merge') pulled in by =dev-python/PyQt4-4.4.4-r1[dbus,qt3support,svg,webkit,X] required by ('ebuild', '/', 'kde-base/pykde4-4.2.4', 'merge') (and 4 more) I would like to understand where the problem is. The bottom says that pykde4-4.2.4 needs at least PyQt4-4.4.4-r2. This is fine, I can see the corresponding DEPEND line in the pykde4-4.2.4 ebuild. The top list tells that: plasma-workspace-4.2.4 needs PyQt4-4.4.0, picard-0.11needs PyQt4 and qscintilla-python-2.3.2-r2 needs PyQt4-4.4 Why then is PyQt4-4.4.4-r5 needed? -r2 should satisfy these needs, too, doesn't it? Or is the problem the 'and 1 more' line? How would I find out which other package would need -r5 then? And why would the other line be listed then? I don't get this. I grepped for PyQt4-4.4.4-r5 through all ebuilds, it appeared only in the PyQt4-4.4.4-r5.ebuild itself. This is not an important problem - I think I can unmask some stuff and it will work. But wanted to cut the amount of masking down a little, and I'm just curious why this happens. So, thanks for any insights, if want to practice your portage-fu, but don't bother if you have more important things to do, I'm fine :) There was issues with pykde4 recently resulting in these blockers. Easiest way out is to remove all local masks you might have for PyQt and pykde4, unmerge both and emerge -uND world. Let portage sort it out. IIRC you can get by by just unmerging one of them and it works. But, I'm too lazy now to figure out which way round it goes, and memory ain't what it used to be. -- alan dot mckinnon at gmail dot com
[gentoo-user] Imagemagick and gnome packages
I noticed a number of new gnome related packages dropping in all of a sudden as a result of the new svg USE flag in imagemagick: = # emerge -uptDv world These are the packages that would be merged, in reverse order: Calculating world dependencies... done! [nomerge ] net-print/hplip-2.7.10 USE=X ppds scanner -doc -fax -minimal -parport -snmp [nomerge ] dev-python/PyQt-3.17.3 USE=-debug -doc -examples [nomerge ] x11-libs/qscintilla-2.1-r1 [1.7.1] USE=python%* qt4%* -debug% -doc -examples% [ebuild N]dev-python/qscintilla-python-2.1 USE=qt4 1,824 kB [ebuild U ] x11-libs/qscintilla-2.1-r1 [1.7.1] USE=python%* qt4%* -debug% -doc -examples% 0 kB [ebuild U ] www-client/mozilla-firefox-bin-2.0.0.12 [2.0.0.11] USE=-restrict-javascript LINGUAS=el en_GB -af -ar -be -bg -ca -cs -da -de -es -es_AR -es_ES -eu -fi -fr -fy -fy_NL -ga -ga_IE -gu -gu_IN -he -hu -it -ja -ka -ko -ku -lt -mk -mn -nb -nb_NO -nl -nn -nn_NO -pa -pa_IN -pl -pt -pt_BR -pt_PT -ro -ru -sk -sl -sv -sv_SE -tr -uk -zh -zh_CN -zh_TW 9,774 kB [nomerge ] dev-python/qscintilla-python-2.1 USE=qt4 [ebuild N] dev-python/PyQt4-4.3.3 USE=-debug -doc -examples 6,047 kB [ebuild U ] media-libs/xine-lib-1.1.10.1 [1.1.10] USE=X a52 aac aalib alsa dts dvd flac imagemagick mad mng modplug musepack nls opengl oss real sdl speex theora truetype v4l vcd vidix vorbis win32codecs xcb xv xvmc (-altivec) -arts -debug -directfb -dxr3 -esd -fbcon -gnome -gtk -ipv6 -jack -libcaca -mmap -pulseaudio -samba -wavpack -xinerama 7,264 kB [ebuild U ] media-gfx/imagemagick-6.3.7.9 [6.3.5.10] USE=X bzip2 jpeg perl png svg%* tiff truetype wmf xml zlib -djvu% -doc -fontconfig% -fpx -graphviz -gs -hdri -jbig -jpeg2k -lcms -nocxx -openexr -q32 -q8 (-mpeg%*) 7,331 kB [ebuild N] gnome-base/librsvg-2.20.0 USE=zlib -debug -doc -gnome 453 kB [ebuild U ] app-text/ghostscript-esp-8.15.4 [8.15.3] USE=X cups xml -cjk -djvu% -gtk -threads 8,580 kB [ebuild U ] app-admin/testdisk-6.8-r1 [6.5] USE=jpeg ntfs reiserfs -static 751 kB [ebuild U ] sys-fs/ntfsprogs-2.0.0 [1.13.1-r1] USE=crypt -debug -fuse -gnome 883 kB [ebuild N] dev-libs/libconfig-1.2 494 kB [nomerge ] gnome-base/librsvg-2.20.0 USE=zlib -debug -doc -gnome [ebuild N] gnome-extra/libgsf-1.14.7 USE=bzip2 python -debug -doc -gnome 0 kB [nomerge ] net-print/cups-1.2.12-r4 USE=X dbus jpeg ldap nls pam png ppds ssl tiff -php -samba -slp [nomerge ] net-libs/gnutls-2.0.4 USE=nls zlib -doc -guile -lzo [ebuild U ] dev-libs/libtasn1-1.2 [0.3.5] USE=-doc 1,476 kB [ebuild NS ] sys-kernel/gentoo-sources-2.6.23-r8 USE=-build -symlink 280 kB [nomerge ] dev-python/PyQt4-4.3.3 USE=-debug -doc -examples [ebuild U ] dev-python/sip-4.7.3 [4.7.1] USE=-debug 436 kB [ebuild U ] sys-fs/dosfstools-2.11-r3 [2.11-r1] 0 kB [ebuild U ] www-client/mozilla-launcher-1.58 [1.56] 7 kB [nomerge ] net-print/cups-1.2.12-r4 USE=X dbus jpeg ldap nls pam png ppds ssl tiff -php -samba -slp [ebuild U ] app-text/libpaper-1.1.23 [1.1.21] 343 kB Total: 18 packages (12 upgrades, 5 new, 1 in new slot), Size of downloads: 45,936 kB = Other than setting -svg for imagemagick is there anything else I could do to keep these additional gnome packages out? -- Regards, Mick signature.asc Description: This is a digitally signed message part.
[gentoo-user] --depclean and PyQt4 blocking
Hi, I did my weekly updates last night and as always I run --depclean -p afterwards to see if anything needs cleaning out. I seem to have ran into something that doesn't make sense. This is what I get: r...@smoker / # emerge -p --depclean * Always study the list of packages to be cleaned for any obvious * mistakes. Packages that are part of the world set will always * be kept. They can be manually added to this set with * `emerge --noreplace atom`. Packages that are listed in * package.provided (see portage(5)) will be removed by * depclean, even if they are part of the world set. * * As a safety measure, depclean will not remove any packages * unless *all* required dependencies have been resolved. As a * consequence, it is often necessary to run `emerge --update * --newuse --deep @system @world` prior to depclean. Calculating dependencies... done! Checking for lib consumers... Assigning files to packages... * In order to avoid breakage of link level dependencies, one or more * packages will not be removed. This can be solved by rebuilding the * packages that pulled them in. * * x11-libs/qt-assistant-4.4.2-r1 pulled in by: * dev-python/PyQt4-4.4.4-r1 * * x11-libs/qt-xmlpatterns-4.4.2 pulled in by: * dev-python/PyQt4-4.4.4-r1 * Adding lib providers to graph... / Calculating dependencies... done! No packages selected for removal by depclean To see reverse dependencies, use --verbose r...@smoker / # I have ran emerge -1va =x11-libs/qt-assistant-4.4.2-r1 =x11-libs/qt-xmlpatterns-4.4.2 =dev-python/PyQt4-4.4.4-r1 so that it will re-emerge all the packages it was fussing about. I get the same thing. I also ran revdep-rebuild -i and it comes back clean. I then did this, emerge -v1a =dev-python/qscintilla-python-2.3.2 =x11-libs/qscintilla-2.3.2 =dev-python/PyQt-3.17.6 =x11-libs/qt-gui-4.4.2-r1 =x11-libs/qt-dbus-4.4.2 and still get the same thing. Anybody ran into this? Anybody have a clue why it keeps giving this message? Do I need to rebuild something else that I missed to clear this up? Dale :-) :-)
Re: [gentoo-user] hplip upgrade wants qt in spite of USE flags
On Wednesday 02 January 2008 16:59:41 Chris Bare wrote: I'm trying to run my normal upgrade on a gnome-only system. It looks like the 2.7 version of hplip wants qt even though I have the following in my make.conf USE: -kde -qt -qt3 -qt4 Here is the emerge tree output: [...] net-print/hplip-2.7.10 [1.7.4a-r2] USE=X -doc% -fax -minimal% -parport -ppds -scanner -snmp (-cups%*) (-foomaticdb%) (-qt3%) [ebuild N] dev-python/PyQt-3.17.3 USE=-debug -doc -examples 786 kB [ebuild N ] x11-libs/qscintilla-1.7.1 USE=-doc 1,036 kB [ebuild N] x11-libs/qt-3.3.8-r4 USE=cups gif ipv6 mysql opengl xinerama -debug -doc -examples -firebird -immqt -immqt-bc -nas -nis -odbc -postgres [...] I'd want to look into why hplip needs PyQt, and why that needs qscintilla. I can't help you much, as this is a KDE box with all sorts of things present that you won't have - sorry. I see though that hplip wants to emerge with (-qt3%), which is a pretty hard exclusion, but only on hplip - not necessarily on things it depends on. if I add -X to USE, the qt dependency goes away, but I try to avoid package-specific use flags if I can help it. If you mean putting package-specific USE flags in /etc/make.conf, you can avoid it thus: If /etc/portage/package.use is a file, do this: 'echo net-print/hplip -X /etc/portage/package.use' If instead it's a directory, do this: 'echo net-print/hplip -X /etc/portage/package.use/net-print' On the other hand, if you don't like these flags at all, I can't help. -- Rgds Peter -- [EMAIL PROTECTED] mailing list
[gentoo-user] PyQt4-4.5 and pykde4-4.2.4 blockers
Today's sync includes PyQt4-4.5 which is blocked by pykde4-4.2.4 (incompatible and build issues). Apparently pykde4-4.3 will fix this, but meanwhile I need to get emerge world to run and complete. To decide what to mask and what to leave, I need to discover what these packages actually do and what the effect will be if I unmask stuff. I *could* experiment, but will probably overlook many important things. As an assist to figuring this out and deciding, can someone tell me what pykde4 and PyQt4 actually do and how these packages use them: a...@nazgul ~/downloads/kernel $ equery depends pykde4 * Searching for pykde4 ... kde-base/marble-4.2.4 (python ? =kde-base/pykde4-4.2.4:4.2[kdeprefix=]) kde-base/plasma-workspace-4.2.4 (python ? =kde- base/pykde4-4.2.4:4.2[kdeprefix=]) a...@nazgul ~/downloads/kernel $ equery depends PyQt4 * Searching for PyQt4 ... dev-python/qscintilla-python-2.3.2-r1 (qt4 ? =dev-python/PyQt4-4.4) kde-base/marble-4.2.4 (python ? =dev-python/PyQt4-4.4.4-r1[X,svg]) kde-base/plasma-workspace-4.2.4 (python ? =dev-python/PyQt4-4.4.0[X]) kde-base/pykde4-4.2.4 (=dev-python/PyQt4-4.4.4- r1[dbus,qt3support,svg,webkit,X]) media-sound/picard-0.11 (dev-python/PyQt4[X]) net-print/hplip-3.9.4b (!minimal qt4 !qt3 ? dev-python/PyQt4[X]) -- alan dot mckinnon at gmail dot com
Re: [gentoo-user] PyQt4-4.5 and pykde4-4.2.4 blockers
On Mittwoch 10 Juni 2009, Alan McKinnon wrote: Today's sync includes PyQt4-4.5 which is blocked by pykde4-4.2.4 (incompatible and build issues). Apparently pykde4-4.3 will fix this, but meanwhile I need to get emerge world to run and complete. To decide what to mask and what to leave, I need to discover what these packages actually do and what the effect will be if I unmask stuff. I *could* experiment, but will probably overlook many important things. As an assist to figuring this out and deciding, can someone tell me what pykde4 and PyQt4 actually do and how these packages use them: a...@nazgul ~/downloads/kernel $ equery depends pykde4 * Searching for pykde4 ... kde-base/marble-4.2.4 (python ? =kde-base/pykde4-4.2.4:4.2[kdeprefix=]) kde-base/plasma-workspace-4.2.4 (python ? =kde- base/pykde4-4.2.4:4.2[kdeprefix=]) a...@nazgul ~/downloads/kernel $ equery depends PyQt4 * Searching for PyQt4 ... dev-python/qscintilla-python-2.3.2-r1 (qt4 ? =dev-python/PyQt4-4.4) kde-base/marble-4.2.4 (python ? =dev-python/PyQt4-4.4.4-r1[X,svg]) kde-base/plasma-workspace-4.2.4 (python ? =dev-python/PyQt4-4.4.0[X]) kde-base/pykde4-4.2.4 (=dev-python/PyQt4-4.4.4- r1[dbus,qt3support,svg,webkit,X]) media-sound/picard-0.11 (dev-python/PyQt4[X]) net-print/hplip-3.9.4b (!minimal qt4 !qt3 ? dev-python/PyQt4[X]) http://hwoarang.silverarrow.org/?p=389 especially the bug linked to.
Re: [gentoo-user] Fusion-icon
I think this is the package you need: app-admin/python-updater. http://gentoo-portage.com/app-admin/python-updater Hope it helps, Στις Πεμ 20 Μαρ 2008, ο/η Danis Petkakis έγραψε: root@ ~ equery l python [ Searching for package 'python' in all categories among: ] * installed packages [I--] [ ] app-admin/python-updater-0.2 (0) [I--] [ ] dev-lang/python-2.4.4-r9 (2.4) [I--] [ ~] dev-python/compizconfig-python-0.6.0.1 (0) [I--] [ ] dev-python/dbus-python-0.80.2 (0) [I--] [ ] dev-python/python-docs-2.4.4 (2.4) [I--] [ ] dev-python/python-fchksum-1.7.1 (0) [I--] [ ] dev-python/qscintilla-python-2.1 (0) [I--] [ ] dev-python/wxpython-2.6.4.0-r1 (2.6) should i emerge all of this again?? how can i tell if i have other python modules installed?? On 19/03/2008, birbilis [EMAIL PROTECTED] wrote: Re-emerge dev-python/sip and probably all the python modules you have installed (?). There must be a script for this though i don't recall it :| Στις Τετ 19 Μαρ 2008, ο/η Danis Petkakis έγραψε: hello there...yesterday i did a major stupidity of mine...i accidentaly unmerged python and borked my system...i managed to get my system back to work but since then fusion-icon doesn't work...here is what i get when running it from konsole jrn23@ ~ fusion-icon * Detected Session: kde * Searching for installed applications... * NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING * Using the GTK Interface * /usr/lib/python2.5/site-packages/gtk-2.0/gobject/_gobject.so: undefined symbol: PyUnicodeUCS4_FromObject ... Trying another interface * Using the Qt4 Interface * /usr/lib/python2.5/site-packages/sip.so: undefined symbol: PyUnicodeUCS4_AsWideChar ... Trying another interface * Using the Qt3 Interface * Interface not installed *** Error: All interfaces failed, aborting! could someone tell me how to solve this?? after the crash and after i recovered python in order to get 'emerge' to work i did 'emerge -vNuD world' and then 'revdep-rebuild' and re-emerged fusion-icon...what else should i do?? -- gentoo-user@lists.gentoo.org mailing list -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Trying KDE-4
Alan McKinnon writes: Repost the output of your emerge command using the -t option. Tip: tricky blockers often require that you post the output of 'emerge -t'. Otherwise all we know is THAT you have a block and no way to determine WHY it's happening. If you are going to post emerge output, it's a excellent habit to do it with -t I had the same experience as Peter. Looks like it's PyQt. I have it in world, no idea why, maybe I forgot the -1 switch once. Anyway, equery also lists it as a dependency of amarok-1.4.10 (when the python use flag is set). And it's another dependency of qscintilla-python, when the qt4 use flag is not set (for me, it is). I do not know how to solve this, but did not yet try hard to do so. I'm installing KDE 4.1 on a remote machine I do not have physical access to yet, so it's no showstopper for me. Yet :) Wonko
Re: [gentoo-user] Fusion-icon
root@ ~ equery l python [ Searching for package 'python' in all categories among: ] * installed packages [I--] [ ] app-admin/python-updater-0.2 (0) [I--] [ ] dev-lang/python-2.4.4-r9 (2.4) [I--] [ ~] dev-python/compizconfig-python-0.6.0.1 (0) [I--] [ ] dev-python/dbus-python-0.80.2 (0) [I--] [ ] dev-python/python-docs-2.4.4 (2.4) [I--] [ ] dev-python/python-fchksum-1.7.1 (0) [I--] [ ] dev-python/qscintilla-python-2.1 (0) [I--] [ ] dev-python/wxpython-2.6.4.0-r1 (2.6) should i emerge all of this again?? how can i tell if i have other python modules installed?? On 19/03/2008, birbilis [EMAIL PROTECTED] wrote: Re-emerge dev-python/sip and probably all the python modules you have installed (?). There must be a script for this though i don't recall it :| Στις Τετ 19 Μαρ 2008, ο/η Danis Petkakis έγραψε: hello there...yesterday i did a major stupidity of mine...i accidentaly unmerged python and borked my system...i managed to get my system back to work but since then fusion-icon doesn't work...here is what i get when running it from konsole jrn23@ ~ fusion-icon * Detected Session: kde * Searching for installed applications... * NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING * Using the GTK Interface * /usr/lib/python2.5/site-packages/gtk-2.0/gobject/_gobject.so: undefined symbol: PyUnicodeUCS4_FromObject ... Trying another interface * Using the Qt4 Interface * /usr/lib/python2.5/site-packages/sip.so: undefined symbol: PyUnicodeUCS4_AsWideChar ... Trying another interface * Using the Qt3 Interface * Interface not installed *** Error: All interfaces failed, aborting! could someone tell me how to solve this?? after the crash and after i recovered python in order to get 'emerge' to work i did 'emerge -vNuD world' and then 'revdep-rebuild' and re-emerged fusion-icon...what else should i do?? -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Multiple instances of PyQt4
On 7/21/09, Alan McKinnon alan.mckin...@gmail.com wrote: On Tuesday 21 July 2009 17:11:33 Alex Schuster wrote: Hi there! My @world update shows this problem: !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: dev-python/PyQt4:0 ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r5', 'merge') pulled in by =dev-python/PyQt4-4.4.0[X] required by ('installed', '/', 'kde- base/plasma-workspace-4.2.4', 'nomerge') dev-python/PyQt4[X] required by ('installed', '/', 'media- sound/picard-0.11', 'nomerge') =dev-python/PyQt4-4.4 required by ('ebuild', '/', 'dev- python/qscintilla-python-2.3.2-r2', 'merge') (and 1 more) ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r2', 'merge') pulled in by =dev-python/PyQt4-4.4.4-r1[dbus,qt3support,svg,webkit,X] required by ('ebuild', '/', 'kde-base/pykde4-4.2.4', 'merge') (and 4 more) I would like to understand where the problem is. The bottom says that pykde4-4.2.4 needs at least PyQt4-4.4.4-r2. This is fine, I can see the corresponding DEPEND line in the pykde4-4.2.4 ebuild. The top list tells that: plasma-workspace-4.2.4 needs PyQt4-4.4.0, picard-0.11needs PyQt4 and qscintilla-python-2.3.2-r2 needs PyQt4-4.4 Why then is PyQt4-4.4.4-r5 needed? -r2 should satisfy these needs, too, doesn't it? Or is the problem the 'and 1 more' line? How would I find out which other package would need -r5 then? And why would the other line be listed then? I don't get this. I grepped for PyQt4-4.4.4-r5 through all ebuilds, it appeared only in the PyQt4-4.4.4-r5.ebuild itself. This is not an important problem - I think I can unmask some stuff and it will work. But wanted to cut the amount of masking down a little, and I'm just curious why this happens. So, thanks for any insights, if want to practice your portage-fu, but don't bother if you have more important things to do, I'm fine :) There was issues with pykde4 recently resulting in these blockers. Easiest way out is to remove all local masks you might have for PyQt and pykde4, unmerge both and emerge -uND world. Let portage sort it out. IIRC you can get by by just unmerging one of them and it works. But, I'm too lazy now to figure out which way round it goes, and memory ain't what it used to be. PyQt4-4.5.1 ebuild was removed from the portage tree over the weekend. I had only that specific version unmasked (IIRC kde4 dependencies?), and ran into a similar(?) situation yesterday. Maybe you hit the same? (Similar situation == portage surprises and wants to downgrade PyQt4 to 4.4.4-something.) No worries, IIRC I just unmasked 4.5.2 and everything has been smiles and sunshine again afterward. -- Arttu V.
Re: [gentoo-user] Fusion-icon
/usr/bin/python is symlinked to python2.5 to my system too and nothing seems to be wrong... so this is done by the ebuild. AFAIK python versions are multi-slotted, e.g. I have versions 2.4.4-r8 and 2.5.1-r5 currently installed. Obviously, there must be some packages that rely on previous versions of python... Στις Πεμ 20 Μαρ 2008, ο/η Danis Petkakis έγραψε: well i seem to have without to my knowledge symlinked 'usr/bin/python /usr/bin/python2' to python-2.5...i corrected the symlink to point to python-2.4 and run 'python-updater' again and there were a lot of packages that were built again and now my problem is solved...thanks for your help...but could you tell me why it was a mistake to have symlinked the above to python-2.5?? On 20/03/2008, birbilis [EMAIL PROTECTED] wrote: I think this is the package you need: app-admin/python-updater. http://gentoo-portage.com/app-admin/python-updater Hope it helps, Στις Πεμ 20 Μαρ 2008, ο/η Danis Petkakis έγραψε: root@ ~ equery l python [ Searching for package 'python' in all categories among: ] * installed packages [I--] [ ] app-admin/python-updater-0.2 (0) [I--] [ ] dev-lang/python-2.4.4-r9 (2.4) [I--] [ ~] dev-python/compizconfig-python-0.6.0.1 (0) [I--] [ ] dev-python/dbus-python-0.80.2 (0) [I--] [ ] dev-python/python-docs-2.4.4 (2.4) [I--] [ ] dev-python/python-fchksum-1.7.1 (0) [I--] [ ] dev-python/qscintilla-python-2.1 (0) [I--] [ ] dev-python/wxpython-2.6.4.0-r1 (2.6) should i emerge all of this again?? how can i tell if i have other python modules installed?? On 19/03/2008, birbilis [EMAIL PROTECTED] wrote: Re-emerge dev-python/sip and probably all the python modules you have installed (?). There must be a script for this though i don't recall it Στις Τετ 19 Μαρ 2008, ο/η Danis Petkakis έγραψε: hello there...yesterday i did a major stupidity of mine...i accidentaly unmerged python and borked my system...i managed to get my system back to work but since then fusion-icon doesn't work...here is what i get when running it from konsole jrn23@ ~ fusion-icon * Detected Session: kde * Searching for installed applications... * NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING * Using the GTK Interface * /usr/lib/python2.5/site-packages/gtk-2.0/gobject/_gobject.so: undefined symbol: PyUnicodeUCS4_FromObject ... Trying another interface * Using the Qt4 Interface * /usr/lib/python2.5/site-packages/sip.so: undefined symbol: PyUnicodeUCS4_AsWideChar ... Trying another interface * Using the Qt3 Interface * Interface not installed *** Error: All interfaces failed, aborting! could someone tell me how to solve this?? after the crash and after i recovered python in order to get 'emerge' to work i did 'emerge -vNuD world' and then 'revdep-rebuild' and re-emerged fusion-icon...what else should i do?? -- gentoo-user@lists.gentoo.org mailing list -- gentoo-user@lists.gentoo.org mailing list -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Fusion-icon
well i seem to have without to my knowledge symlinked 'usr/bin/python /usr/bin/python2' to python-2.5...i corrected the symlink to point to python-2.4 and run 'python-updater' again and there were a lot of packages that were built again and now my problem is solved...thanks for your help...but could you tell me why it was a mistake to have symlinked the above to python-2.5?? On 20/03/2008, birbilis [EMAIL PROTECTED] wrote: I think this is the package you need: app-admin/python-updater. http://gentoo-portage.com/app-admin/python-updater Hope it helps, Στις Πεμ 20 Μαρ 2008, ο/η Danis Petkakis έγραψε: root@ ~ equery l python [ Searching for package 'python' in all categories among: ] * installed packages [I--] [ ] app-admin/python-updater-0.2 (0) [I--] [ ] dev-lang/python-2.4.4-r9 (2.4) [I--] [ ~] dev-python/compizconfig-python-0.6.0.1 (0) [I--] [ ] dev-python/dbus-python-0.80.2 (0) [I--] [ ] dev-python/python-docs-2.4.4 (2.4) [I--] [ ] dev-python/python-fchksum-1.7.1 (0) [I--] [ ] dev-python/qscintilla-python-2.1 (0) [I--] [ ] dev-python/wxpython-2.6.4.0-r1 (2.6) should i emerge all of this again?? how can i tell if i have other python modules installed?? On 19/03/2008, birbilis [EMAIL PROTECTED] wrote: Re-emerge dev-python/sip and probably all the python modules you have installed (?). There must be a script for this though i don't recall it :| Στις Τετ 19 Μαρ 2008, ο/η Danis Petkakis έγραψε: hello there...yesterday i did a major stupidity of mine...i accidentaly unmerged python and borked my system...i managed to get my system back to work but since then fusion-icon doesn't work...here is what i get when running it from konsole jrn23@ ~ fusion-icon * Detected Session: kde * Searching for installed applications... * NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING * Using the GTK Interface * /usr/lib/python2.5/site-packages/gtk-2.0/gobject/_gobject.so: undefined symbol: PyUnicodeUCS4_FromObject ... Trying another interface * Using the Qt4 Interface * /usr/lib/python2.5/site-packages/sip.so: undefined symbol: PyUnicodeUCS4_AsWideChar ... Trying another interface * Using the Qt3 Interface * Interface not installed *** Error: All interfaces failed, aborting! could someone tell me how to solve this?? after the crash and after i recovered python in order to get 'emerge' to work i did 'emerge -vNuD world' and then 'revdep-rebuild' and re-emerged fusion-icon...what else should i do?? -- gentoo-user@lists.gentoo.org mailing list -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Slot Nightmare
I've been fighting this for two days now: catherine ~ # emerge -uD world Calculating dependencies... done! [ebuild U ] app-arch/cpio-2.9-r2 [2.9-r1] [ebuild U ] net-misc/dhcpcd-4.0.7 [4.0.2] [ebuild U ] dev-libs/mpfr-2.3.2 [2.3.1_p1] [ebuild N] dev-perl/yaml-0.65 [ebuild NS ] sys-kernel/gentoo-sources-2.6.27-r8 [2.6.27-r7] USE=-build -symlink [ebuild U ] sys-devel/gdb-6.8-r1 [6.7.1-r3] USE=-multitarget% [ebuild UD] app-text/poppler-0.6.3-r1 [0.10.3] USE=jpeg%* zlib%* -cjk% [ebuild U ] sys-apps/groff-1.19.2-r3 [1.19.2-r1] [ebuild U ] x11-terms/xterm-239 [237] [ebuild U ] dev-java/ant-core-1.7.1-r2 [1.7.0-r1] [ebuild U ] dev-lang/nasm-2.05.01 [2.04] [ebuild U ] media-libs/libmpeg2-0.5.1 [0.4.1] [ebuild U ] x11-libs/qscintilla-2.3.2 [2.1-r1] [ebuild U ] dev-python/qscintilla-python-2.3.2 [2.1] [ebuild U ] dev-python/PyQt-3.17.6 [3.17.4] [ebuild N] perl-core/Module-Build-0.28.08 [ebuild N] virtual/perl-Module-Build-0.28.08 [ebuild N] perl-core/ExtUtils-CBuilder-0.23 [ebuild N] virtual/perl-ExtUtils-CBuilder-0.23 [ebuild N] perl-core/ExtUtils-ParseXS-2.19 [ebuild N] virtual/perl-ExtUtils-ParseXS-2.19 !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: app-text/poppler:0 ('installed', '/', 'app-text/poppler-0.10.3', 'nomerge') pulled in by ~app-text/poppler-0.10.3 required by ('installed', '/', 'app-text/poppler-bindings-0.10.3', 'nomerge') (and 4 more) ('ebuild', '/', 'app-text/poppler-0.6.3-r1', 'merge') pulled in by app-text/poppler required by world =app-text/poppler-0.6.1 required by ('installed', '/', 'kde-base/kdegraphics-3.5.9', 'nomerge') =app-text/poppler-0.4.3-r1 required by ('installed', '/', 'net-print/cups-1.3.9-r1', 'nomerge') (and 1 more) It may be possible to solve this problem by using package.mask to prevent one of those packages from being selected. However, it is also possible that conflicting dependencies exist such that they are impossible to satisfy simultaneously. If such a conflict exists in the dependencies of two different packages, then those packages can not be installed simultaneously. For more information, see MASKED PACKAGES section in the emerge man page or refer to the Gentoo Handbook. I need poppler-0.10.3 to get around the qt circular dependency problem. Lower versions of poppler and poppler-bindings are not installed: catherine ~ # emerge -pvC poppler poppler-bindings These are the packages that would be unmerged: app-text/poppler selected: 0.10.3 protected: none omitted: none app-text/poppler-bindings selected: 0.10.3 protected: none omitted: none 'Selected' packages are slated for removal. 'Protected' and 'omitted' packages will not be removed. I've tried every trick I can think of to get around this and nothing has worked. Please help me.
Re: [gentoo-user] Trying KDE-4
On Sunday 19 October 2008 19:32:42 Alex Schuster wrote: Alan McKinnon writes: Repost the output of your emerge command using the -t option. Tip: tricky blockers often require that you post the output of 'emerge -t'. Otherwise all we know is THAT you have a block and no way to determine WHY it's happening. If you are going to post emerge output, it's a excellent habit to do it with -t I had the same experience as Peter. Looks like it's PyQt. I have it in world, no idea why, maybe I forgot the -1 switch once. Anyway, equery also lists it as a dependency of amarok-1.4.10 (when the python use flag is set). And it's another dependency of qscintilla-python, when the qt4 use flag is not set (for me, it is). That sounds familiar. I had some issue with PyQt recently. I've also had many issues with many packages recently, so I forget the details very quickly. I do not know how to solve this, but did not yet try hard to do so. I'm installing KDE 4.1 on a remote machine I do not have physical access to yet, so it's no showstopper for me. Yet :) I main underlying reason seems to be that Qt now comes as split-ebuilds and Peter has some monolithic ones installed. It's similar to migrating KDE to split-ebuilds, but on a much smaller scale. Unfortunately there's no easy way to automate this in an ebuild, that would require several new unrelated packages replacing one big one, portage doesn't support that kind of thing. So one has to do it manually, and deal with the resulting recdep-rebuild issues as well -- alan dot mckinnon at gmail dot com
[gentoo-user] qt blockages...
Hi, I'm not used to seeing all the additional messages below the blockage indication. Can someone possibly help me understand how to read this? Are there really application packages that cannot be installed at the same or is only about qt and possibly the USE flags I've got? I tried removing qjackctl (the only world package I spotted in the list) but that didn't help. What to try next? Thanks, Mark lightning ~ # emerge -pvDuN system These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild U ] app-arch/cpio-2.9-r2 [2.9-r1] USE=nls 0 kB [ebuild U ] dev-db/sqlite-3.6.6.2 [3.5.9] USE=threadsafe -debug -doc -soundex -tcl 2,250 kB [ebuild U ] media-libs/libpng-1.2.34 [1.2.33] 503 kB [ebuild U ] dev-libs/mpfr-2.3.2 [2.3.1_p1] 798 kB [ebuild U ] dev-python/sip-4.7.9 [4.7.3] USE=-debug 461 kB [ebuild U ] x11-libs/gtk+-2.14.7 [2.14.5] USE=X cups jpeg tiff -debug -doc -jpeg2k -vim-syntax -xinerama 17,067 kB [ebuild U ] sys-apps/groff-1.19.2-r3 [1.19.2-r1] USE=X cjk 0 kB [ebuild U ] sys-libs/gpm-1.20.5 [1.20.1-r6] USE=(-selinux) 1,269 kB [ebuild U ] dev-python/PyQt-3.17.6 [3.17.4] USE=-debug -doc -examples 795 kB [ebuild N] x11-libs/qt-core-4.4.2 USE=qt3support ssl -debug -doc -glib -pch 102,858 kB [ebuild N] x11-libs/qt-dbus-4.4.2 USE=-debug -pch 0 kB [ebuild N] x11-libs/qt-sql-4.4.2 USE=mysql odbc qt3support sqlite -debug (-firebird) -pch -postgres 0 kB [ebuild N] x11-libs/qt-script-4.4.2 USE=-debug -pch 0 kB [ebuild N] x11-libs/qt-gui-4.4.2-r1 USE=accessibility cups dbus qt3support tiff -debug -glib -mng -nas -nis -pch -xinerama INPUT_DEVICES=-wacom 0 kB [ebuild N] x11-libs/qt-qt3support-4.4.2 USE=accessibility -debug -pch 0 kB [ebuild N] x11-libs/qt-svg-4.4.2 USE=-debug -pch 0 kB [ebuild N] x11-libs/qt-opengl-4.4.2 USE=qt3support -debug -pch 0 kB [ebuild U ] dev-python/PyQt4-4.4.4-r1 [4.3.3] USE=X%* dbus%* opengl%* qt3support%* svg%* -debug -doc -examples -webkit% 6,819 kB [ebuild U ] x11-libs/qscintilla-2.3.2 [2.1-r1] USE=python qt4 -debug -doc -examples 2,097 kB [ebuild U ] dev-python/qscintilla-python-2.3.2 [2.1] USE=qt4 0 kB [blocks B ] x11-libs/qt-core (x11-libs/qt-core is blocking x11-libs/qt-4.3.3) [blocks B ] =x11-libs/qt-4.4.0_alpha:4 (=x11-libs/qt-4.4.0_alpha:4 is blocking x11-libs/qt-script-4.4.2, x11-libs/qt-dbus-4.4.2, x11-libs/qt-gui-4.4.2-r1, x11-libs/qt-qt3support-4.4.2, x11-libs/qt-sql-4.4.2, x11-libs/qt-svg-4.4.2, x11-libs/qt-core-4.4.2, x11-libs/qt-opengl-4.4.2) Total: 20 packages (12 upgrades, 8 new), Size of downloads: 134,911 kB Conflict: 2 blocks (2 unsatisfied) * Error: The above package list contains packages which cannot be * installed at the same time on the same system. ('ebuild', '/', 'x11-libs/qt-opengl-4.4.2', 'merge') pulled in by =x11-libs/qt-opengl-4.4.2:4 required by ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r1', 'merge') ('ebuild', '/', 'x11-libs/qt-gui-4.4.2-r1', 'merge') pulled in by x11-libs/qt-gui:4 required by ('installed', '/', 'media-sound/qjackctl-0.3.3', 'nomerge') =x11-libs/qt-gui-4.4.2:4 required by ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r1', 'merge') x11-libs/qt-gui:4 required by ('ebuild', '/', 'x11-libs/qscintilla-2.3.2', 'merge') (and 4 more) ('ebuild', '/', 'x11-libs/qt-svg-4.4.2', 'merge') pulled in by =x11-libs/qt-svg-4.4.2:4 required by ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r1', 'merge') ('ebuild', '/', 'x11-libs/qt-core-4.4.2', 'merge') pulled in by =x11-libs/qt-core-4.4.2:4 required by ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r1', 'merge') x11-libs/qt-core:4 required by ('installed', '/', 'media-sound/qjackctl-0.3.3', 'nomerge') ~x11-libs/qt-core-4.4.2 required by ('ebuild', '/', 'x11-libs/qt-sql-4.4.2', 'merge') (and 4 more) ('ebuild', '/', 'x11-libs/qt-dbus-4.4.2', 'merge') pulled in by ~x11-libs/qt-dbus-4.4.2 required by ('ebuild', '/', 'x11-libs/qt-gui-4.4.2-r1', 'merge') =x11-libs/qt-dbus-4.4.2:4 required by ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r1', 'merge') ('ebuild', '/', 'x11-libs/qt-qt3support-4.4.2', 'merge') pulled in by =x11-libs/qt-qt3support-4.4.2:4 required by ('ebuild', '/', 'dev-python/PyQt4-4.4.4-r1', 'merge') ~x11-libs/qt-qt3support-4.4.2 required by ('ebuild', '/', 'x11-libs/qt-gui-4.4.2-r1', 'merge') ('installed', '/', 'x11-libs/qt-4.3.3', 'nomerge') pulled in by =x11-libs/qt-4.3:4 required by ('installed', '/', 'app-text/poppler-bindings-0.8.7', 'nomerge') For more information about Blocked Packages, please refer to the following section of the Gentoo Linux x86 Handbook (architecture is irrelevant): http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked !!! The following installed packages are masked: - x11-libs/qt-4.3.3 (masked by: package.mask) /usr/portage/profiles/arch/amd64/package.mask: # Markus Meier mae...@gentoo.org (18 Jan 2009) # mask this version
[gentoo-user] qt-dbus blocker
gtk%* tiff -debug -mng -nas -nis -pch -qt3support* -raster -xinerama (-gtkstyle%*) 0 kB [blocks b ]x11-libs/qt-dbus-4.5.2 (x11-libs/qt-dbus-4.5.2 is blocking x11-libs/qt-test-4.5.2, x11-libs/qt-gui-4.5.2-r2, x11-libs/qt-core-4.5.2, x11-libs/qt-script-4.5.2) [ebuild U ] x11-libs/qt-dbus-4.5.2 [4.5.1] USE=-debug -pch 0 kB [blocks b ] x11-libs/qt-script-4.5.2 (x11-libs/qt-script-4.5.2 is blocking x11-libs/qt-test-4.5.2, x11-libs/qt-gui-4.5.2-r2, x11-libs/qt-core-4.5.2, x11-libs/qt-dbus-4.5.2) [ebuild U ] x11-libs/qt-script-4.5.2 [4.5.1] USE=iconv -debug -pch 0 kB [ebuild U ]x11-libs/qt-core-4.5.2 [4.5.1] USE=glib iconv ssl -debug -doc -pch -qt3support* 0 kB [nomerge ] dev-python/PyQt-3.18.1 USE=-debug -doc -examples [nomerge ] x11-libs/qscintilla-2.4 USE=python qt4 -doc [nomerge ] dev-python/qscintilla-python-2.4 USE=qt4 -debug [nomerge ]dev-python/PyQt4-4.5.4-r4 USE=X dbus -assistant -debug -doc -examples -kde -opengl -phonon -sql -svg -webkit -xmlpatterns [ebuild U ] dev-python/dbus-python-0.83.0-r1 [0.82.4] USE=-doc% -examples% -test 483 kB [ebuild U ] dev-python/pyrex-0.9.8.5-r1 [0.9.8.5] USE=-examples 0 kB [nomerge ] x11-apps/xdm-1.1.9 USE=ipv6 pam -debug [ebuild U ] x11-apps/xinit-1.0.8-r10 [1.0.8-r8] USE=pam -consolekit -debug -minimal 0 kB [nomerge ] dev-scheme/guile-1.8.5-r1 USE=deprecated emacs networking nls regex threads -debug -debug-freelist -debug-malloc -discouraged -elisp [ebuild U ] dev-libs/gmp-4.3.1 [4.2.4] USE=-nocxx 1,838 kB [blocks B ] x11-libs/qt-dbus-4.5.1-r (x11-libs/qt-dbus-4.5.1-r is blocking x11-libs/qt-script-4.5.1, x11-libs/qt-test-4.5.1, x11-libs/qt-gui-4.5.1, x11-libs/qt-qt3support-4.5.1, x11-libs/qt-sql-4.5.1, x11-libs/qt-core-4.5.1) Total: 12 packages (12 upgrades, 2 uninstalls), Size of downloads: 115,616 kB Conflict: 11 blocks
Re: [gentoo-user] update problems after profile update
On Tue, 10 Nov 2009 12:17:20 +0200 Alan McKinnon wrote: On Tuesday 10 November 2009 12:14:13 Arnau Bria wrote: profile, from default/linux/x86/10.0/desktop to default/linux/x86/10.0. *not sure if my problem comes from changing profile... err, according to that you didn't change profile at all they are 2 diff profiles: # eselect profile list Available profile symlink targets: [1] default/linux/x86/10.0 * [2] default/linux/x86/10.0/desktop [3] default/linux/x86/10.0/developer [4] default/linux/x86/10.0/server [...] [...] More output please, especially emerge -t This is the original output, with no use change: Calculating dependencies... done! !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: x11-libs/qt-script:4 ('ebuild', '/', 'x11-libs/qt-script-4.5.3-r1', 'merge') pulled in by =x11-libs/qt-script-4.5.1:4 required by ('ebuild', '/', 'kde-base/akregator-4.3.1', 'merge') ~x11-libs/qt-script-4.5.3[-debug] required by ('ebuild', '/', 'x11-libs/qt-gui-4.5.3-r2', 'merge') =x11-libs/qt-script-4.5.1:4 required by ('installed', '/', 'dev-python/PyQt4-4.5.4-r4', 'nomerge') ('installed', '/', 'x11-libs/qt-script-4.5.1', 'nomerge') pulled in by ~x11-libs/qt-script-4.5.1[-debug] required by ('installed', '/', 'x11-libs/qt-gui-4.5.1', 'nomerge') x11-libs/qt-dbus:4 ('ebuild', '/', 'x11-libs/qt-dbus-4.5.3-r1', 'merge') pulled in by =x11-libs/qt-dbus-4.5.1:4 required by ('installed', '/', 'dev-python/PyQt4-4.5.4-r4', 'nomerge') ('installed', '/', 'x11-libs/qt-dbus-4.5.1', 'nomerge') pulled in by ~x11-libs/qt-dbus-4.5.1[-debug] required by ('installed', '/', 'x11-libs/qt-gui-4.5.1', 'nomerge') x11-libs/qt-core:4 ('ebuild', '/', 'x11-libs/qt-core-4.5.3-r2', 'merge') pulled in by ~x11-libs/qt-core-4.5.3[-debug] required by ('ebuild', '/', 'x11-libs/qt-script-4.5.3-r1', 'merge') ~x11-libs/qt-core-4.5.3[glib,-debug,-qt3support] required by ('ebuild', '/', 'x11-libs/qt-gui-4.5.3-r2', 'merge') ~x11-libs/qt-core-4.5.3[-debug] required by ('ebuild', '/', 'x11-libs/qt-dbus-4.5.3-r1', 'merge') (and 3 more) ('installed', '/', 'x11-libs/qt-core-4.5.1', 'nomerge') pulled in by ~x11-libs/qt-core-4.5.1[glib,qt3support,-debug] required by ('installed', '/', 'x11-libs/qt-gui-4.5.1', 'nomerge') ~x11-libs/qt-core-4.5.1[-debug] required by ('installed', '/', 'x11-libs/qt-dbus-4.5.1', 'nomerge') ~x11-libs/qt-core-4.5.1[-debug] required by ('installed', '/', 'x11-libs/qt-script-4.5.1', 'nomerge') (and 2 more) x11-libs/qt-gui:4 ('ebuild', '/', 'x11-libs/qt-gui-4.5.3-r2', 'merge') pulled in by ~x11-libs/qt-gui-4.5.3[-debug,-qt3support] required by ('ebuild', '/', 'x11-libs/qt-opengl-4.5.3-r1', 'merge') x11-libs/qt-gui:4 required by ('installed', '/', 'x11-libs/qscintilla-2.4', 'nomerge') ~x11-libs/qt-gui-4.5.3[-debug] required by ('ebuild', '/', 'x11-libs/qt-svg-4.5.3-r1', 'merge') ('installed', '/', 'x11-libs/qt-gui-4.5.1', 'nomerge') pulled in by =x11-libs/qt-gui-4.5.1:4[accessibility,dbus] required by ('ebuild', '/', 'kde-base/akregator-4.3.1', 'merge') ~x11-libs/qt-gui-4.5.1[qt3support,accessibility,-debug] required by ('installed', '/', 'x11-libs/qt-qt3support-4.5.1', 'nomerge') ~x11-libs/qt-gui-4.5.1[qt3support] required by ('installed', '/', 'x11-libs/qt-core-4.5.1', 'nomerge') (and 1 more) What you supplied should that there's trouble with some qt packages. Most likely you have two packages that have conflicting needs with regard to qt, but without the actual output we cannot help you. you're right, I missed some importnat info... sorry about that. so, do I have to remove old packages? Cheers, -- Arnau Bria http://blog.emergetux.net Bombing for peace is like fucking for virginity
Re: [gentoo-user] update problems after profile update
On Tuesday 10 November 2009 12:33:37 Arnau Bria wrote: On Tue, 10 Nov 2009 12:17:20 +0200 Alan McKinnon wrote: On Tuesday 10 November 2009 12:14:13 Arnau Bria wrote: profile, from default/linux/x86/10.0/desktop to default/linux/x86/10.0. *not sure if my problem comes from changing profile... err, according to that you didn't change profile at all they are 2 diff profiles: # eselect profile list Available profile symlink targets: [1] default/linux/x86/10.0 * [2] default/linux/x86/10.0/desktop [3] default/linux/x86/10.0/developer [4] default/linux/x86/10.0/server [...] [...] More output please, especially emerge -t This is the original output, with no use change: Calculating dependencies... done! !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: x11-libs/qt-script:4 ('ebuild', '/', 'x11-libs/qt-script-4.5.3-r1', 'merge') pulled in by =x11-libs/qt-script-4.5.1:4 required by ('ebuild', '/', 'kde-base/akregator-4.3.1', 'merge') ~x11-libs/qt-script-4.5.3[-debug] required by ('ebuild', '/', 'x11-libs/qt-gui-4.5.3-r2', 'merge') =x11-libs/qt-script-4.5.1:4 required by ('installed', '/', 'dev-python/PyQt4-4.5.4-r4', 'nomerge') ('installed', '/', 'x11-libs/qt-script-4.5.1', 'nomerge') pulled in by ~x11-libs/qt-script-4.5.1[-debug] required by ('installed', '/', 'x11-libs/qt-gui-4.5.1', 'nomerge') x11-libs/qt-dbus:4 ('ebuild', '/', 'x11-libs/qt-dbus-4.5.3-r1', 'merge') pulled in by =x11-libs/qt-dbus-4.5.1:4 required by ('installed', '/', 'dev-python/PyQt4-4.5.4-r4', 'nomerge') ('installed', '/', 'x11-libs/qt-dbus-4.5.1', 'nomerge') pulled in by ~x11-libs/qt-dbus-4.5.1[-debug] required by ('installed', '/', 'x11-libs/qt-gui-4.5.1', 'nomerge') x11-libs/qt-core:4 ('ebuild', '/', 'x11-libs/qt-core-4.5.3-r2', 'merge') pulled in by ~x11-libs/qt-core-4.5.3[-debug] required by ('ebuild', '/', 'x11-libs/qt-script-4.5.3-r1', 'merge') ~x11-libs/qt-core-4.5.3[glib,-debug,-qt3support] required by ('ebuild', '/', 'x11-libs/qt-gui-4.5.3-r2', 'merge') ~x11-libs/qt-core-4.5.3[-debug] required by ('ebuild', '/', 'x11-libs/qt-dbus-4.5.3-r1', 'merge') (and 3 more) ('installed', '/', 'x11-libs/qt-core-4.5.1', 'nomerge') pulled in by ~x11-libs/qt-core-4.5.1[glib,qt3support,-debug] required by ('installed', '/', 'x11-libs/qt-gui-4.5.1', 'nomerge') ~x11-libs/qt-core-4.5.1[-debug] required by ('installed', '/', 'x11-libs/qt-dbus-4.5.1', 'nomerge') ~x11-libs/qt-core-4.5.1[-debug] required by ('installed', '/', 'x11-libs/qt-script-4.5.1', 'nomerge') (and 2 more) x11-libs/qt-gui:4 ('ebuild', '/', 'x11-libs/qt-gui-4.5.3-r2', 'merge') pulled in by ~x11-libs/qt-gui-4.5.3[-debug,-qt3support] required by ('ebuild', '/', 'x11-libs/qt-opengl-4.5.3-r1', 'merge') x11-libs/qt-gui:4 required by ('installed', '/', 'x11-libs/qscintilla-2.4', 'nomerge') ~x11-libs/qt-gui-4.5.3[-debug] required by ('ebuild', '/', 'x11-libs/qt-svg-4.5.3-r1', 'merge') ('installed', '/', 'x11-libs/qt-gui-4.5.1', 'nomerge') pulled in by =x11-libs/qt-gui-4.5.1:4[accessibility,dbus] required by ('ebuild', '/', 'kde-base/akregator-4.3.1', 'merge') ~x11-libs/qt-gui-4.5.1[qt3support,accessibility,-debug] required by ('installed', '/', 'x11-libs/qt-qt3support-4.5.1', 'nomerge') ~x11-libs/qt-gui-4.5.1[qt3support] required by ('installed', '/', 'x11-libs/qt-core-4.5.1', 'nomerge') (and 1 more) You seem to have conflicting requirements for qt-gui What do you have in make.conf and package.use regarding qt packages and those USE flags? Do you have any qt packages in your world file (you should not have for average use)? -- alan dot mckinnon at gmail dot com
[gentoo-user] Impossible to compile PyQt
Hi all, the upgrade of my system has had another stop. This time due to PyQt. I googled and found many problems regarding PyQt, but, because of my english, I did not understand what exactly to do. Here is my error log: -- Unpacking source... Unpacking PyQt-x11-gpl-3.17.tar.gz to /var/tmp/portage/dev-python/PyQt-3.17/work Source unpacked. Compiling source in /var/tmp/portage/dev-python/PyQt-3.17/work/PyQt-x11-gpl-3.17 ... cfgtest.cpp: In function 'int main(int, char**)': cfgtest.cpp:5: error: expected type-specifier before 'QInterlaceStyle' cfgtest.cpp:5: error: expected `;' before 'QInterlaceStyle' cfgtest.cpp:1:29: error: qwindowsxpstyle.h: No such file or directory cfgtest.cpp: In function 'int main(int, char**)': cfgtest.cpp:5: error: expected type-specifier before 'QWindowsXPStyle' cfgtest.cpp:5: error: expected `;' before 'QWindowsXPStyle' QScintilla 1.5.1 is being used. Checking to see if the qtcanvas module should be built... Checking to see if the qtnetwork module should be built... Checking to see if the qttable module should be built... Checking to see if the qtxml module should be built... Checking to see if the qtgl module should be built... Checking to see if the qtui module should be built... Checking to see if the qtsql module should be built... Checking to see if the qtext module should be built... Checking to see if the QAssistantClient class is available... Creating features file... Checking to see if the QCDEStyle class is built in... Checking to see if the QInterlaceStyle class is built in... Checking to see if the QMotifStyle class is built in... Checking to see if the QMotifPlusStyle class is built in... Checking to see if the QPlatinumStyle class is built in... Checking to see if the QSGIStyle class is built in... Checking to see if the QWindowsXPStyle class is built in... Checking to see if the QWindowsStyle class is built in... Qt v3.3.8 free edition is being used. SIP 4.7 is being used. These PyQt modules will be built: qt qtcanvas qtnetwork qttable qtxml qtgl qtui qtsql qtext. Support for these Qt classes has been disabled: QInterlaceStyle QWindowsXPStyle. The PyQt modules will be installed in /usr/lib64/python2.4/site-packages. The PyQt .sip files will be installed in /usr/share/sip. The Qt header files are in /usr/qt/3/include. The qt-mt Qt library is in /usr/qt/3/lib64. pyuic will be installed in /usr/bin. pylupdate will be installed in /usr/bin. Generating the C++ source for the qt module... Creating the Makefile for the qt module... Generating the C++ source for the qtext module... Creating the Makefile for the qtext module... Generating the C++ source for the qtgl module... Creating the Makefile for the qtgl module... Generating the C++ source for the qtui module... Creating the Makefile for the qtui module... Generating the C++ source for the qtcanvas module... Creating the Makefile for the qtcanvas module... Generating the C++ source for the qtnetwork module... Creating the Makefile for the qtnetwork module... Generating the C++ source for the qtsql module... Creating the Makefile for the qtsql module... Generating the C++ source for the qttable module... Creating the Makefile for the qttable module... Generating the C++ source for the qtxml module... Creating the Makefile for the qtxml module... Creating top level Makefile... Creating pyuic Makefile... Creating pylupdate Makefile... Creating pyqtconfig.py... make[1]: Entering directory `/var/tmp/portage/dev-python/PyQt-3.17/work/PyQt-x11-gpl-3.17/qt' x86_64-pc-linux-gnu-g++ -c -pipe -fPIC -march=k8 -O2 -pipe -fno-strict-aliasing -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_THREAD_SUPPORT -I. -I/usr/include/python2.4 -I/usr/qt/3/mkspecs/linux-g++ -I/usr/qt/3/include -I/usr/X11R6/include -o sipqtcmodule.o sipqtcmodule.cpp x86_64-pc-linux-gnu-g++ -c -pipe -fPIC -march=k8 -O2 -pipe -fno-strict-aliasing -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_THREAD_SUPPORT -I. -I/usr/include/python2.4 -I/usr/qt/3/mkspecs/linux-g++ -I/usr/qt/3/include -I/usr/X11R6/include -o sipqtQPtrList.o sipqtQPtrList.cpp sip/qt/qdir.sip:47:28: error: sipqtQFileInfo.h: No such file or directory x86_64-pc-linux-gnu-g++ -c -pipe -fPIC -march=k8 -O2 -pipe -fno-strict-aliasing -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_THREAD_SUPPORT -I. -I/usr/include/python2.4 -I/usr/qt/3/mkspecs/linux-g++ -I/usr/qt/3/include -I/usr/X11R6/include -o sipqtQWorkspace.o sipqtQWorkspace.cpp sip/qt/qwidgetlist.sip:38:26: error: sipqtQWidget.h: No such file or directory sip/qt/qobjectlist.sip:38:26: error: sipqtQObject.h: No such file or directory sipqtcmodule.cpp:13422: error: 'sipQtFindConnection' was not declared in this scope make[1]: *** [sipqtcmodule.o] Error 1 make[1]: *** Waiting for unfinished jobs make[1]: *** [sipqtQWorkspace.o] Error 1 make[1]: Leaving directory `/var/tmp/portage/dev-python/PyQt-3.17/work/PyQt-x11-gpl-3.17/qt' make: *** [all] Error 2 !!! ERROR: dev-python/PyQt-3.17 failed
[gentoo-user] hplip upgrade wants qt in spite of USE flags
I'm trying to run my normal upgrade on a gnome-only system. It looks like the 2.7 version of hplip wants qt even though I have the following in my make.conf USE: -kde -qt -qt3 -qt4 Here is the emerge tree output: oberon tmp # emerge -puDtv hplip These are the packages that would be merged, in reverse order: [nomerge ] net-print/hplip-2.7.10 [1.7.4a-r2] USE=X -doc% -fax -minimal% -parport -ppds -scanner -snmp (-cups%*) (-foomaticdb%) (-qt3%) [nomerge ] sys-kernel/gentoo-sources-2.6.23-r3 USE=-build -symlink [nomerge ] sys-libs/ncurses-5.6-r2 [5.6-r1] USE=gpm unicode -bootstrap -build -debug -doc -minimal -nocxx -profile% -trace [ebuild U ]sys-libs/gpm-1.20.1-r6 [1.20.1-r5] USE=(-selinux) 561 kB [nomerge ] net-print/hplip-2.7.10 [1.7.4a-r2] USE=X -doc% -fax -minimal% -parport -ppds -scanner -snmp (-cups%*) (-foomaticdb%) (-qt3%) [nomerge ] net-print/foomatic-filters-3.0.20060720 USE=cups [?] [nomerge ] virtual/ghostscript-0 [?] [nomerge ]app-text/ghostscript-esp-8.15.3 USE=X cups gtk xml -cjk -threads [?] [nomerge ] x11-libs/gtk+-2.12.1-r2 USE=X cups jpeg tiff xinerama -debug -doc -vim-syntax [nomerge ] x11-libs/pango-1.18.3 USE=-debug -doc [nomerge ] x11-libs/cairo-1.4.12 USE=X glitz opengl svg -debug -directfb -doc -xcb [nomerge ]media-libs/glitz-0.5.6 [?] [nomerge ] media-libs/mesa-6.5.2-r1 USE=motif nptl -debug -doc -hardened -xcb VIDEO_CARDS=-i810 -mach64 -mga -none -r128 -radeon -s3virge -savage -sis (-sunffb) -tdfx -trident -via [?] [nomerge ] x11-libs/openmotif-2.2.3-r9 [?] [nomerge ] x11-libs/motif-config-0.9-r1 [ebuild U ]app-shells/bash-3.2_p17-r1 [3.2_p17] USE=nls -afs -bashlogger -plugins% -vanilla 2,522 kB [ebuild U ] sys-libs/ncurses-5.6-r2 [5.6-r1] USE=gpm unicode -bootstrap -build -debug -doc -minimal -nocxx -profile% -trace 2,353 kB [ebuild U ] net-print/hplip-2.7.10 [1.7.4a-r2] USE=X -doc% -fax -minimal% -parport -ppds -scanner -snmp (-cups%*) (-foomaticdb%) (-qt3%) 14,104 kB [nomerge ] sys-kernel/gentoo-sources-2.6.23-r3 USE=-build -symlink [nomerge ] sys-fs/udev-115-r1 USE=(-selinux) [ebuild U ] sys-apps/baselayout-1.12.10-r5 [1.12.9-r2] USE=unicode -bootstrap -build -static 214 kB [nomerge ] net-print/hplip-2.7.10 [1.7.4a-r2] USE=X -doc% -fax -minimal% -parport -ppds -scanner -snmp (-cups%*) (-foomaticdb%) (-qt3%) [ebuild N] dev-python/PyQt-3.17.3 USE=-debug -doc -examples 786 kB [ebuild N] x11-libs/qscintilla-1.7.1 USE=-doc 1,036 kB [ebuild N]x11-libs/qt-3.3.8-r4 USE=cups gif ipv6 mysql opengl xinerama -debug -doc -examples -firebird -immqt -immqt-bc -nas -nis -odbc -postgres -sqlite 16,986 kB [nomerge ] x11-libs/openmotif-2.2.3-r9 [?] [ebuild U ] x11-libs/libXaw-1.0.4 [1.0.3] USE=-debug -xprint 506 kB [nomerge ] dev-python/PyQt-3.17.3 USE=-debug -doc -examples [ebuild N] dev-python/sip-4.7.1 USE=-debug 432 kB [nomerge ] net-print/foomatic-filters-3.0.20060720 USE=cups [?] [nomerge ] net-print/cups-1.2.12-r4 USE=X dbus jpeg nls pam png ssl tiff -ldap -php -ppds -samba -slp [nomerge ] x11-misc/xdg-utils-1.0.2 USE=-doc [ebuild U ]x11-apps/xprop-1.0.3 [1.0.2] USE=-debug 105 kB [nomerge ] x11-libs/libXaw-1.0.4 [1.0.3] USE=-debug -xprint [ebuild U ] x11-libs/libXpm-3.5.7 [3.5.6] USE=-debug 350 kB [nomerge ] dev-python/PyQt-3.17.3 USE=-debug -doc -examples [nomerge ] x11-libs/qt-3.3.8-r4 USE=cups gif ipv6 mysql opengl xinerama -debug -doc -examples -firebird -immqt -immqt-bc -nas -nis -odbc -postgres -sqlite [ebuild U ] x11-libs/libXcursor-1.1.9 [1.1.8] USE=-debug 230 kB [ebuild U ] x11-libs/libSM-1.0.3 [1.0.2] USE=ipv6 -debug 219 kB [ebuild U ]x11-libs/libICE-1.0.4 [1.0.3] USE=ipv6 -debug 247 kB [ebuild U ] x11-libs/libXi-1.1.3 [1.1.2] USE=-debug 243 kB [ebuild U ] media-libs/freetype-2.3.5-r2 [2.3.4-r2] USE=X -bindist -debug -doc -utils% (-zlib%*) 1,250 kB [ebuild U ]x11-libs/libX11-1.1.3 [1.1.2-r1] USE=ipv6 -debug -xcb 1,492 kB [ebuild U ] x11-proto/inputproto-1.4.2.1
Re: [gentoo-user] Trying KDE-4
] net-news/liferea-1.4.15 USE=dbus* firefox -debug -gnutls -gtkhtml -libnotify -lua -networkmanager -seamonkey -xulrunner 0 kB [ebuild R ] media-video/vlc-0.8.6i-r2 USE=X a52 alsa arts cdda cddb dc1394 dvd httpd libnotify live mp3 mpeg ncurses nsplugin ogg opengl png rtsp sdl sdl-image stream svg truetype vcd vorbis x264 xml xv (-3dfx) -aalib (-altivec) -avahi -bidi -corba -daap -debug -directfb -dts -dvb -esd -fbcon -flac -ggi -gnome -gnutls -hal* -jack -libcaca -lirc -matroska -modplug -musepack -optimisememory -oss -samba -seamonkey -shout -skins -speex (-svga) -theora -upnp -v4l -vlm (-win32codecs) -wxwindows -xinerama -xosd -xulrunner 0 kB [ebuild R ] media-gfx/gimp-2.4.6 USE=alsa curl dbus* doc exif gtkhtml lcms mmx mng pdf png python smp sse svg tiff wmf -aalib (-altivec) -debug -gnome -hal* 0 kB [nomerge ] net-print/hplip-2.8.6b USE=cupsddk dbus* doc qt3 qt4* -fax -minimal -parport -ppds -scanner -snmp [nomerge ] dev-python/PyQt-3.17.4 USE=-debug -doc -examples [nomerge ] x11-libs/qscintilla-2.1-r1 USE=python qt4* -debug -doc -examples [ebuild R ]dev-python/qscintilla-python-2.1 USE=qt4* 0 kB [ebuild N] dev-python/PyQt4-4.3.3 USE=-debug -doc -examples 0 kB [nomerge ] media-gfx/inkscape-0.46-r5 USE=doc lcms perl spell wmf -debug -dia -gnome -inkjar -jabber (-mmx) -postscript [ebuild R ] app-text/poppler-bindings-0.8.7 USE=cairo gtk qt3 qt4* -test 0 kB [nomerge ] kde-base/kate-4.1.2 [3.5.9] USE=plasma -debug -htmlhandbook -kdeprefix [nomerge ] kde-base/libplasma-4.1.2 USE=opengl -debug -kdeprefix -test -xinerama [ebuild N] app-misc/strigi-0.5.11 USE=clucene dbus exif fam qt4 -debug -hyperestraier -inotify -log -test 857 kB [nomerge ] kde-base/dragonplayer-4.1.2 USE=-kdeprefix [ebuild N] media-libs/xine-lib-1.1.15-r1 USE=X a52 alsa arts dts dvd gtk ipv6 mad mng modplug musepack nls opengl sdl theora truetype v4l vcd vorbis xcb xv -aac -aalib (-altivec) -debug -directfb -dxr3 -esd -fbcon -flac -gnome -imagemagick -jack -libcaca -mmap -oss -pulseaudio -real -samba -speex (-vidix) (-vis) -wavpack (-win32codecs) -xinerama -xvmc 7,304 kB [ebuild R ] net-print/cups-1.3.8-r2 USE=X acl dbus* java jpeg pam perl png python ssl tiff -avahi -gnutls -kerberos -ldap -php -ppds -samba -slp -static -xinetd -zeroconf LINGUAS=en -de -es -et -fr -he -id -it -ja -pl -sv -zh_TW 0 kB [nomerge ] kde-base/dolphin-4.1.2 USE=semantic-desktop -debug -htmlhandbook -kdeprefix [nomerge ] dev-libs/soprano-2.1 USE=clucene sesame2 -debug -doc -redland [ebuild N] media-libs/raptor-1.4.16 USE=curl unicode xml 1,476 kB [ebuild U ] dev-util/cmake-2.4.8 [2.4.6-r1] USE=-emacs -vim-syntax 2,548 kB [ebuild N]dev-libs/xmlrpc-c-1.06.27 USE=curl threads 684 kB [nomerge ] kde-base/ark-4.1.2 [3.5.9] USE=archive zip -debug -htmlhandbook -kdeprefix [ebuild N] app-arch/libarchive-2.4.12 USE=acl -build -static -xattr 805 kB [nomerge ] kde-base/systemsettings-4.1.2 USE=opengl usb -debug -htmlhandbook -kdeprefix -xinerama [ebuild N] x11-libs/libxklavier-3.6 USE=-doc 452 kB [nomerge ] kde-base/dragonplayer-4.1.2 USE=-kdeprefix [nomerge ] kde-base/phonon-xine-4.1.2 USE=xcb -debug -kdeprefix [nomerge ] media-libs/xine-lib-1.1.15-r1 USE=X a52 alsa arts dts dvd gtk ipv6 mad mng modplug musepack nls opengl sdl theora truetype v4l vcd vorbis xcb xv -aac -aalib (-altivec) -debug -directfb -dxr3 -esd -fbcon -flac -gnome -imagemagick -jack -libcaca -mmap -oss -pulseaudio -real -samba -speex (-vidix) (-vis) -wavpack (-win32codecs) -xinerama -xvmc [ebuild N]x11-libs/libxcb-1.0 USE=-debug 410 kB [ebuild N] x11-proto/xcb-proto-1.0 70 kB [nomerge ] kde-base/kamera-4.1.2 [3.5.9] USE=-debug -htmlhandbook -kdeprefix [ebuild R ] media-libs/libgphoto2-2.4.1-r1 USE=exif nls -doc -hal* CAMERAS=fuji -adc65 -agfa_cl20 -aox -barbie -canon -casio_qv -clicksmart310 -digigr8 -digita -dimagev -dimera3500 -directory -enigma13 -gsmart300 -hp215 -iclick -jamcam -jd11 -kodak_dc120 -kodak_dc210 -kodak_dc240 -kodak_dc3200 -kodak_ez200 -konica -konica_qm150 -largan -lg_gsm -mars -mustek -panasonic_coolshot -panasonic_dc1000 -panasonic_dc1580 -panasonic_l859 -pccam300 -pccam600 -polaroid_pdc320 -polaroid_pdc640 -polaroid_pdc700 -ptp2 -ricoh -ricoh_g3 -samsung -sierra -sipix_blink -sipix_blink2 -sipix_web2 -smal -sonix -sony_dscf1 -sony_dscf55 -soundvision -spca50x -sq905 -stv0674 -stv0680 -sx330z -template -toshiba_pdrm11 0 kB [nomerge ] kde-base/kstyles-4.1.2 USE=-kdeprefix [ebuild N] kde-base/qimageblitz-0.0.4 USE=mmx sse sse2 -3dnow (-altivec) -debug 55 kB [nomerge ] kde-base/kdm-4.1.2 [3.5.9] USE=pam -debug -htmlhandbook -kdeprefix -kerberos [ebuild R ] x11-apps/xinit-1.0.8-r3 USE=pam -debug -hal* -minimal 0 kB [nomerge ] kde-base/kgamma-4.1.2 [3.5.9] USE=-debug -htmlhandbook -kdeprefix [ebuild
Re: [gentoo-user] Trying KDE-4
On Wednesday 22 October 2008 19:32:08 Daniel Pielmeier wrote: Please post again the output from emerge -pvutND world but attach it in a file so it doesn't get crippled by the mail program. Attached. Also what I have seen from your previous tree output is that you are trying to do many things at one time. Upgrading to kde4 changing and changing many use flags. This makes debugging very hard. Try to do only one thing at a time That's only because one thing leads to another. All I wanted to do was to install KDE-4; everything else I've tried has been to enable that. Of course I do try to do only one thing at a time - I had half a lifetime of debugging of one kind or another. I started by running autounmask, as suggested by Neil B; that unmasked 81 packages. Then I tried to update world - 82 times: one for each other package that needed unmasking. At the end of that I had all the packages unmasked that were required for an upgrade to KDE-4, but I also had the blocker that started this conversation. I've been trying to find the conflict in dependencies ever since, with your help - thanks again. Here's another titbit: $ equery d '=x11-libs/qt-4.4.0_alpha:4' [ Searching for packages depending on =x11-libs/qt-4.4.0_alpha:4... ] app-text/poppler-bindings-0.8.7 (qt4? =x11-libs/qt-4.3:4) x11-libs/qscintilla-2.1-r1 (qt4? =x11-libs/qt-4.3*:4) -- Rgds Peter These are the packages that would be merged, in reverse order: Calculating dependencies ... ... done! [ebuild R ] app-office/openoffice-3.0.0 USE=cups dbus* gtk java kde mono nsplugin opengl pam -debug -eds -gnome -gstreamer -ldap -odk -templates LINGUAS=en_GB -af -ar -as_IN -be_BY -bg -bn -br -bs -ca -cs -cy -da -de -dz -el -en -en_US -en_ZA -eo -es -et -fa -fi -fr -ga -gl -gu_IN -he -hi_IN -hr -hu -it -ja -km -ko -ku -lt -lv -mk -ml_IN -mr_IN -nb -ne -nl -nn -nr -ns -or_IN -pa_IN -pl -pt -pt_BR -ru -rw -sh -sk -sl -sr -ss -st -sv -sw_TZ -ta_IN -te_IN -tg -th -ti_ER -tn -tr -ts -uk -ur_IN -ve -vi -xh -zh_CN -zh_TW -zu 338,400 kB [ebuild NS ] kde-base/kdebase-meta-4.1.2 [3.5.9] 0 kB [ebuild NS ] x11-libs/qt-4.3.3 [3.3.8-r4] USE=accessibility cups dbus gif jpeg mng mysql odbc opengl png qt3support ssl tiff zlib -debug -doc -examples (-firebird) -glib -nas -nis -pch -postgres -sqlite -sqlite3 -xinerama INPUT_DEVICES=-wacom 41,350 kB [ebuild NS ] kde-base/kdegraphics-meta-4.1.2 [3.5.9] 0 kB [ebuild NS ] kde-base/kdemultimedia-meta-4.1.2 [3.5.9] 0 kB [ebuild U ] media-video/mplayer-1.0_rc2_p27725-r1 [1.0_rc2_p26753] USE=3dnowext X a52 alsa arts cddb cdparanoia cpudetection doc dv dvd enca gif gtk iconv ipv6 jpeg live mad mmx mmxext mp3 openal opengl png real rtc sdl sse sse2 theora truetype unicode vorbis x264 xanim xscreensaver xv xvid xvmc -3dnow -aac -aalib (-altivec) -amrnb -amrwb -bidi -bindist -bl -cdio -custom-cflags -custom-cpuopts% -debug -dga -dirac% -directfb -dts -dvb -dxr3% -encode -esd -fbcon -ftp -ggi -jack -joystick -ladspa -libcaca -lirc -lzo -md5sum -mp2 -musepack -nas -nemesi -oss -pnm -pulseaudio -pvr% -quicktime -radio -rar -samba -schroedinger% -speex -srt -ssse3 (-svga) -teletext -tga -v4l -v4l2 (-vidix) (-win32codecs) -xinerama -zoran VIDEO_CARDS=-mga -s3virge -tdfx -vesa 8,170 kB [ebuild NS ] kde-base/kdeutils-meta-4.1.2 [3.5.9] USE=-floppy 0 kB [ebuild R ] media-video/vlc-0.8.6i-r2 USE=X a52 alsa arts cdda cddb dc1394 dvd httpd libnotify live mp3 mpeg ncurses nsplugin ogg opengl png rtsp sdl sdl-image stream svg truetype vcd vorbis x264 xml xv (-3dfx) -aalib (-altivec) -avahi -bidi -corba -daap -debug -directfb -dts -dvb -esd -fbcon -flac -ggi -gnome -gnutls -hal* -jack -libcaca -lirc -matroska -modplug -musepack -optimisememory -oss -samba -seamonkey -shout -skins -speex (-svga) -theora -upnp -v4l -vlm (-win32codecs) -wxwindows -xinerama -xosd -xulrunner 11,522 kB [ebuild R ] media-gfx/gimp-2.4.6 USE=alsa curl dbus* doc exif gtkhtml lcms mmx mng pdf png python smp sse svg tiff wmf -aalib (-altivec) -debug -gnome -hal* 17,935 kB [ebuild NS ] kde-base/kate-4.1.2 [3.5.9] USE=plasma -debug -htmlhandbook -kdeprefix 4,793 kB [ebuild NS ] kde-base/kdeartwork-meta-4.1.2 [3.5.9] 0 kB [ebuild NS ] kde-base/kdeartwork-emoticons-4.1.2 [3.5.9] USE=-kdeprefix 41,367 kB [ebuild N] kde-base/kdeartwork-colorschemes-4.1.2 USE=-kdeprefix 0 kB [ebuild NS ] kde-base/kdeartwork-kscreensaver-4.1.2 [3.5.9] USE=opengl -debug -kdeprefix -xscreensaver 0 kB [ebuild NS ] kde-base/kdeartwork-styles-4.1.2 [3.5.9] USE=-debug -kdeprefix 0 kB [ebuild NS ] kde-base/kdeartwork-wallpapers-4.1.2 [3.5.9] USE=-kdeprefix 0 kB [ebuild NS ] kde-base/kdeartwork-icewm-themes-4.1.2 [3.5.9] USE=-kdeprefix 0 kB [ebuild NS ] kde-base/kdeartwork-sounds-4.1.2 [3.5.9] USE=-kdeprefix 0 kB [ebuild NS ] kde-base/kdeartwork-kworldclock-4.1.2 [3.5.9] USE=-kdeprefix 0 kB [nomerge ] kde-base/kdeutils-meta-4.1.2 [3.5.9] USE=-floppy [ebuild NS ] kde-base
Re: [gentoo-user] cannot emerge @preserved-rebuild due to removed package...
-0.7.2:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4 required by (dev-python/PyQt4-4.11.1:0/0::gentoo, installed) =dev-qt/qtgui-4.3:4 required by (net-firewall/fwbuilder-5.1.0.3599:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kuiserver-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/solid-runtime-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/krosspython-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/libkexiv2-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/libkcddb-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/khotkeys-4.11.14:4/4.11::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kfind-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/keditbookmarks-4.14.3:4/4.14::gentoo, installed) dev-qt/qtgui:4 required by (media-libs/qimageblitz-0.0.6-r1:0/0::gentoo, installed) dev-qt/qtgui:4 required by (media-gfx/digikam-4.4.0-r1:4/4::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kstart-4.14.3:4/4.14::gentoo, installed) dev-qt/qtgui:4 required by (app-cdr/backlite-1.0.3-r1:0/0::gentoo, installed) dev-qt/qtgui:4 required by (media-sound/drumstick-0.5.0:0/0::gentoo, installed) dev-qt/qtgui:4 required by (media-video/smplayer-14.9.0-r1:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kfmclient-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kmimetypefinder-4.14.3:4/4.14::gentoo, installed) dev-qt/qtgui:4 required by (media-sound/qmidiroute-0.3.0:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kioclient-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kglobalaccel-4.14.3:4/4.14::gentoo, installed) dev-qt/qtgui:4 required by (app-emulation/virtualbox-4.3.18:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kdebugdialog-4.14.3:4/4.14::gentoo, installed) dev-qt/qtgui:4 required by (media-gfx/structure-synth-1.5.0:0/0::gentoo, installed) dev-qt/qtgui:4 required by (media-sound/ams-2.0.1:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kfile-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kquitapp-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/ktouch-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/libkipi-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (media-sound/kmidimon-0.7.5:4/4::gentoo, installed) dev-qt/qtgui:4 required by (sys-boot/unetbootin-608:0/0::gentoo, installed) dev-qt/qtgui:4[accessibility] required by (sci-geosciences/gebabbel-0.4:0/0::gentoo, installed) dev-qt/qtgui:4 required by (media-sound/rosegarden-14.12:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4 required by (x11-libs/qscintilla-2.8.4-r1:0/11::gentoo, installed) dev-qt/qtgui:4 required by (app-text/kchmviewer-6.0-r1:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/marble-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kiconfinder-4.14.3:4/4.14::gentoo, installed) dev-qt/qtgui:4 required by (media-sound/qmmp-0.8.3:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kdontchangethehostname-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/plasma-runtime-4.14.3:4/4.14::gentoo, installed) dev-qt/qtgui:4 required by (media-libs/phonon-4.7.2:0/0::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/kdialog-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4 required by (app-office/akonadi-server-1.13.0:0/0::gentoo, ebuild scheduled for merge) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/khelpcenter-4.14.3:4/4.14::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/attica-4.14.3:4/4.14::gentoo, installed) dev-qt/qtgui:4 required by (app-misc/strigi-0.7.8:0/0::gentoo, installed) =dev-qt/qtgui-4.6.0:4 required by (media-video/vlc-2.1.5-r1:0/5-7::gentoo, installed) =dev-qt/qtgui-4.8.5:4[accessibility,dbus(+)] required by (kde-base/libkworkspace-4.11.14