I believe asterisk is evolving way from a "carrier" mindset more into an
IT one. Losing support for ancient hardware is part of that. I no longer
use IAX (used it to trunk multiple instances across vpn's - worked
well.) Currently I only have a couple of now quite old Cisco phones and
Jami
I think I was able solve my problem, it was as simple as disabling
"jitterbuffer" in iax.conf
I can hear phone voicemail request from the remote asterisk, will know 100% on
Monday.
Regarding Asterisk I'm on 16.30.1 ; tried emerging ver.18 but my AudioCodes box
wouldn't even register to it.
In v18 sip is still present but deprecated - after this its removed.
There is a conversion script (sip->pjsip) for migration. It required a
few sacrificial chickens and much swearing until I got the upstream
trunk to register (iinet in AU). Its all working good now, the pjsip
config is
On Fri, 02 Feb 2024 19:29:24 -0500,
Thelma wrote:
>
> When did they implement switch-over from sip to pjsip?
> I'm using AudioCode boxes.
>
> I emerged and tried to load asterisk ver.18 but the audiocode would not
> register. I suppose ver.16 is the end of the line for me.
>
> On 2/2/24
When did they implement switch-over from sip to pjsip?
I'm using AudioCode boxes.
I emerged and tried to load asterisk ver.18 but the audiocode would not
register. I suppose ver.16 is the end of the line for me.
On 2/2/24 16:39, William Kenworthy wrote:
Yes, was caught out recently by the
Yes, was caught out recently by the replacement of sip with pjsip -
currently on v21.0.2 and working (sip only, simple home setup) Also had
some weird problems with two versions installed (so asterisk started on
old working version even though new one was installed - once I ran
depclean it
On 2/2/24 13:05, John Covici wrote:
On Fri, 02 Feb 2024 14:17:23 -0500,
Thelma wrote:
On 2/2/24 11:37, John Covici wrote:
On Fri, 02 Feb 2024 12:53:07 -0500,
Thelma wrote:
On 2/2/24 10:09, John Covici wrote:
On Fri, 02 Feb 2024 10:26:09 -0500,
Thelma wrote:
Anybody on the list using
On Fri, 02 Feb 2024 14:17:23 -0500,
Thelma wrote:
>
> On 2/2/24 11:37, John Covici wrote:
> > On Fri, 02 Feb 2024 12:53:07 -0500,
> > Thelma wrote:
> >>
> >> On 2/2/24 10:09, John Covici wrote:
> >>>
> >>> On Fri, 02 Feb 2024 10:26:09 -0500,
> >>> Thelma wrote:
>
> Anybody on the
On 2/2/24 11:37, John Covici wrote:
On Fri, 02 Feb 2024 12:53:07 -0500,
Thelma wrote:
On 2/2/24 10:09, John Covici wrote:
On Fri, 02 Feb 2024 10:26:09 -0500,
Thelma wrote:
Anybody on the list using Asterisk?
I need some help.
Have save version of asterisk is working correctly on one
On 2/2/24 11:21, Jack wrote:
On 2024.02.02 12:53, Thelma wrote:
On 2/2/24 10:09, John Covici wrote:
On Fri, 02 Feb 2024 10:26:09 -0500,
Thelma wrote:
Anybody on the list using Asterisk?
I need some help.
Have save version of asterisk is working correctly on one computer but the
other.
On Fri, 02 Feb 2024 12:53:07 -0500,
Thelma wrote:
>
> On 2/2/24 10:09, John Covici wrote:
> >
> > On Fri, 02 Feb 2024 10:26:09 -0500,
> > Thelma wrote:
> >>
> >> Anybody on the list using Asterisk?
> >> I need some help.
> >>
> >> Have save version of asterisk is working correctly on one
On 2024.02.02 12:53, Thelma wrote:
On 2/2/24 10:09, John Covici wrote:
On Fri, 02 Feb 2024 10:26:09 -0500,
Thelma wrote:
Anybody on the list using Asterisk?
I need some help.
Have save version of asterisk is working correctly on one computer
but the other.
I use asterisk all the
On 2/2/24 10:09, John Covici wrote:
On Fri, 02 Feb 2024 10:26:09 -0500,
Thelma wrote:
Anybody on the list using Asterisk?
I need some help.
Have save version of asterisk is working correctly on one computer but the
other.
I use asterisk all the time, but I don't use the gentoo package,
On Fri, 02 Feb 2024 10:26:09 -0500,
Thelma wrote:
>
> Anybody on the list using Asterisk?
> I need some help.
>
> Have save version of asterisk is working correctly on one computer but the
> other.
>
>
I use asterisk all the time, but I don't use the gentoo package, I
compile from source
Anybody on the list using Asterisk?
I need some help.
Have save version of asterisk is working correctly on one computer but the
other.
Is it possible to install asterisk-16.16.2-r1 somewhere from the attic?
--
Thelma
On 12/23/2020 12:47 PM, the...@sys-concept.com wrote:
> When I try to register provision/register equipment to asterisk I get an
> error message:
>
> [Dec 23 12:32:51] WARNING[21685]: db.c:350 ast_db_put: Couldn't execute
> statement: SQL logic error
> -- Registered SIP 'pstn-5665' at
When I try to register provision/register equipment to asterisk I get an error
message:
[Dec 23 12:32:51] WARNING[21685]: db.c:350 ast_db_put: Couldn't execute
statement: SQL logic error
-- Registered SIP 'pstn-5665' at 10.0.0.110:5060
> Saved useragent
Any asterisk guru on a mailing list?
When I was using asterisk 11.25 that was registered with astersk-1.8.28.2
My iax2 "pear to pear" call were going through.
After I upgraded both to ver.11.25 I can not make iax call between the servers.
iax2 show registry
Host dnsmgr
sbasu...@soft-gator.com wrote:
Hello,
I am running asterisk with dahdi in several Gentoo servers, everything
works great, but when I try to use meetme it tells me that there is no
application I already try:
1. In asterisk command line:
asterisk module load app_meetme.so
Unable to
On Fri, 2013-10-18 at 06:28 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
Hello,
I am running asterisk with dahdi in several Gentoo servers, everything
works great, but when I try to use meetme it tells me that there is no
application I already try:
1. In
On Thu, Oct 17, 2013 at 06:23:51PM -0500, sbasu...@soft-gator.com wrote:
Hello,
I am running asterisk with dahdi in several Gentoo servers, everything
works great, but when I try to use meetme it tells me that there is no
application I already try:
1. In asterisk command line:
On Fri, 2013-10-18 at 11:17 -0500, Bruce Hill wrote:
On Thu, Oct 17, 2013 at 06:23:51PM -0500, sbasu...@soft-gator.com wrote:
Hello,
I am running asterisk with dahdi in several Gentoo servers, everything
works great, but when I try to use meetme it tells me that there is no
sbasu...@soft-gator.com wrote:
f On Fri, 2013-10-18 at 06:28 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
Hello,
I am running asterisk with dahdi in several Gentoo servers, everything
works great, but when I try to use meetme it tells me that there is no
On Fri, 2013-10-18 at 13:26 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
f On Fri, 2013-10-18 at 06:28 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
Hello,
I am running asterisk with dahdi in several Gentoo servers, everything
On Fri, 2013-10-18 at 12:36 -0500, sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 13:26 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
f On Fri, 2013-10-18 at 06:28 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
Hello,
On Fri, 2013-10-18 at 12:44 -0500, sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 12:36 -0500, sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 13:26 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
f On Fri, 2013-10-18 at 06:28 -0400,
sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 13:26 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
f On Fri, 2013-10-18 at 06:28 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
Hello,
I am running asterisk with
sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 12:36 -0500, sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 13:26 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
f On Fri, 2013-10-18 at 06:28 -0400, cov...@ccs.covici.com wrote:
On Fri, 2013-10-18 at 16:23 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 13:26 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
f On Fri, 2013-10-18 at 06:28 -0400, cov...@ccs.covici.com wrote:
On Fri, 2013-10-18 at 15:50 -0500, sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 16:23 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 13:26 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
f On Fri,
sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 15:50 -0500, sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 16:23 -0400, cov...@ccs.covici.com wrote:
sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 13:26 -0400, cov...@ccs.covici.com wrote:
On 19/10/13 01:44, sbasu...@soft-gator.com wrote:
On Fri, 2013-10-18 at 12:36 -0500, sbasu...@soft-gator.com wrote:
...
Yeah you are right is Gentoo, I put the log in the following link:
http://www.soft-gator.com/asterisk-11.5.1.ebuild
Any comment on the log will be appreciated.
Kind
Hello,
I am running asterisk with dahdi in several Gentoo servers, everything
works great, but when I try to use meetme it tells me that there is no
application I already try:
1. In asterisk command line:
asterisk module load app_meetme.so
Unable to load module app_meetme.so
Command 'module
Hello,
I am running asterisk with dahdi in several Gentoo servers, everything
works great, but when I try to use meetme it tells me that there is no
application I already try:
1. In asterisk command line:
asterisk module load app_meetme.so
Unable to load module app_meetme.so
Command 'module
Anyone have a success story with asterisk to voip phones?
I'd like to start with a hardware recommendation for the T1 interface card and
or CSU/DSU, if anyone can share. Is Digium, FEX the best way to go?
TIA for any help or FMs to RT. '-)
--
|\ /|| | ~ ~
| \/ |
Le jeudi 23 octobre 2008 22:51:52 Michael Higgins, vous avez écrit :
Anyone have a success story with asterisk to voip phones?
I'd like to start with a hardware recommendation for the T1 interface
card
and or CSU/DSU, if anyone can share. Is Digium, FEX the best way
to go?
TIA for any help
Am Freitag, 27. Jul 2007, 10:36:41 +0200 schrieb Bertram Scharpf:
I configured Asterisk for Capi/ISDN as described in the
common tutorials. In `extensions.conf' I added the lines
[capi-in]
exten = 9876543,1,Goto(demo,1000,1)
where 9876543 is my MSN without the area prefix. This
Hi,
as there seem to be technical problems at the Asterisk list
server I may ask here.
I successfully listen to `demo-congrats' with Xlite. Now I
want to hear it by calling the ISDN card.
I configured Asterisk for Capi/ISDN as described in the
common tutorials. In `extensions.conf' I added the
Hello,
I added the voip overlay to my system. Went to set up asterisk, but it
wants module-init-tools, which wants baselayout. baselayout, all
versions, are masked on my system. This is because I'm in a vserver. In
a vserver, baselayout-vserver has to be used. So I'm stuck right now.
Any ideas
You are lucky that your asterisk wasn't removed.
I recently did emerge --depclean emerge revdep-rebuild everything
seemed fine but wen I tried to upgrade to asterisk stable 1.2.14 my
asterisk was removed :-/
and I never was able to figure out what had happened.
When I did
emerge -C asterisk - it
On Wednesday 21 March 2007 00:08:13 fire-eyes wrote:
I added the voip overlay to my system. Went to set up asterisk, but it
wants module-init-tools, which wants baselayout. baselayout, all
versions, are masked on my system. This is because I'm in a vserver. In
a vserver, baselayout-vserver has
On Wednesday 21 March 2007 01:31:26 Joseph wrote:
You are lucky that your asterisk wasn't removed.
I recently did emerge --depclean emerge revdep-rebuild everything
seemed fine but wen I tried to upgrade to asterisk stable 1.2.14 my
asterisk was removed :-/
and I never was able to figure out
On Tue, 2007-03-20 at 23:08 +, fire-eyes wrote:
Hello,
I added the voip overlay to my system. Went to set up asterisk, but it
wants module-init-tools, which wants baselayout. baselayout, all
versions, are masked on my system. This is because I'm in a vserver. In
a vserver,
I try to genkernel again and update in grub. it's working
thanks,
ti
Boyd Stephen Smith Jr. wrote:
On Sunday 22 October 2006 11:47, Régis Décamps [EMAIL PROTECTED] wrote
about 'Re: [gentoo-user] asterisk zaptel-1.2.9.1 error':
* Could not find a usable .config in the kernel source
Title: asterisk zaptel-1.2.9.1 error
Hi all,
I'm emerge zaptel 1.2.9.1 and get error like this
checking zaptel-1.2.9.1.tar.gz ;-) ... [ ok ]
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Could not find a usable .config in the
On 10/22/06, Kitti Jaisong [EMAIL PROTECTED] wrote:
Hi all,
I'm emerge zaptel 1.2.9.1 and get error like this
checking zaptel-1.2.9.1.tar.gz ;-) ...
[ ok ]
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Could
On Sunday 22 October 2006 11:47, Régis Décamps [EMAIL PROTECTED] wrote
about 'Re: [gentoo-user] asterisk zaptel-1.2.9.1 error':
* Could not find a usable .config in the kernel source directory.
* Please ensure that /usr/src/linux points to a configured set of
Linux sources.
You should
Dear all,Please anyone have experience about asterisk setup. and I'm very new to asterisk. so please help me to configure my asterisk server.i need to know like what are the basic requirement for to setup asterisk..
Thanking you,Suranga
quoth the Suranga Kasthuriarachchi:
i need to know like what are the basic requirement for to setup asterisk..
http://chayden.net/Asterisk/SeUpAsteriskAtHome.htm
http://www.voip-info.org/wiki/view/Asterisk%40home+Handbook+Wiki
http://nerdvittles.com/index.php?p=61
On Thursday 28 September 2006 09:44, Suranga Kasthuriarachchi wrote:
Please anyone have experience about asterisk setup. and I'm very new to
asterisk. so please help me to configure my asterisk server.
i need to know like what are the basic requirement for to setup asterisk..
51 matches
Mail list logo