Subject: Re: Moving z/vm and zlinux volumes from old dasd to new dasd
Ah - I see you meant for this to be run against new DASD -- assuming the
copy had been done... I wasn't sure how/when the DASD would be copied to
the old...so it does depend... the script should be run before or
after
: Thursday, August 16, 2018 7:39 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Moving z/vm and zlinux volumes from old dasd to new dasd
Ah - I see you meant for this to be run against new DASD -- assuming the
copy had been done... I wasn't sure how/when the DASD would be copied to
the old...so
; 'COMMENTS ? IPLPARMS' ipl_parm
>>
>>queue 'IPL Parameters Options are: '
>>queue 'CONS= FN=fn FT=ft CLEARPDR REPAIR NOEXITS NOHCD PROMPT'
>> queue ' PDNUM=n PDOFF=offset PDVOL=addr STORE=M/G/T/P/E '
>>queue
'SALIPL' dev_addr '(' salp_opt end
>
> Exit
>
>
>
> Larry Davis
>
>
> -----Original Message-
> From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of
> Davis, Jim [PRI-1PP]
> Sent: Thursday, August 16, 2018 17:54
> To: LINUX-390@VM.MARIST.E
rom: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Davis,
Jim [PRI-1PP]
Sent: Thursday, August 16, 2018 17:54
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Moving z/vm and zlinux volumes from old dasd to new dasd
Thanks for the info. I get the following.
Current IPL parameters:
FN=SYSTEM
Of Davis,
Jim [PRI-1PP]
Sent: Thursday, August 16, 2018 17:15
To: LINUX-390@VM.MARIST.EDU
Subject: Moving z/vm and zlinux volumes from old dasd to new dasd
I have been tasked with moving our z/VM and zlinux file system volume from an
old DASD system to a New DASD system.
All of my device numbers / unit
Just a small warning: QUERY IPLPARMS shows you the parameters that will be
used on SHUTDOWN REIPL.
They will typically be the parameters that were in effect at IPL time, but
they can be changed by SET IPLPARMS.
I recommend updating AUTOLOG1 to stash away the output of QUERY IPLPARMS so
Rohling
> Sent: Thursday, August 16, 2018 5:40 PM
> To: LINUX-390@VM.MARIST.EDU
> Subject: Re: Moving z/vm and zlinux volumes from old dasd to new dasd
>
> CP Query IPL gives you the parms used...
>
> You can use SAIPL to bring up z/VM the first time on new DASD (just s
on 390 Port On Behalf Of Scott Rohling
Sent: Thursday, August 16, 2018 5:40 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Moving z/vm and zlinux volumes from old dasd to new dasd
CP Query IPL gives you the parms used...
You can use SAIPL to bring up z/VM the first time on new DASD (just specify
pdnum=1 pdvol=F004
To determine the IPL parameters of the existing system, use the Q IPLPARMS
command.
Regards, Fred
From: "Davis, Jim [PRI-1PP]"
To: LINUX-390@VM.MARIST.EDU
Date: 08/16/2018 05:16 PM
Subject: Moving z/vm and zlinux volumes from old dasd to new
Move all six volumes to their new addresses.
IPL from new res volume address.
-Original Message-
From: Linux on 390 Port On Behalf Of Tom Huegel
Sent: Thursday, August 16, 2018 5:36 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Moving z/vm and zlinux volumes from old dasd to new dasd
Last
CP Query IPL gives you the parms used...
You can use SAIPL to bring up z/VM the first time on new DASD (just specify
correct PDVOL=) .. then run SALIPL on the IPL volume to make the parms
stick and not need SAIPL next time..
Scott Rohling
On Thu, Aug 16, 2018 at 2:17 PM Davis, Jim
Last question Q IPLPARMS
On Thu, Aug 16, 2018 at 4:14 PM, Davis, Jim [PRI-1PP] <
jim.da...@primerica.com> wrote:
> I have been tasked with moving our z/VM and zlinux file system volume from
> an old DASD system to a New DASD system.
> All of my device numbers / unit addresses will change.
>
> I
I have been tasked with moving our z/VM and zlinux file system volume from an
old DASD system to a New DASD system.
All of my device numbers / unit addresses will change.
I have been successful in moving all of the z/linux volumes.
My problem is how to move the 6 VM volumes since the IPL text
14 matches
Mail list logo