Helmut Auer schrieb:
Once again ( I don't give up too fast :-). Isn't here anyone
experiencing the same problem ? On vdrportal the same error is reported.
Do I have to use different diseqc settings ? What has changed from 1.01
to 1.10 in that region ?
It is definitely a ves1x93-problem. For
Hi Oliver,
diseqc.conf
S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t S19.2E 9 V
...
It seems to be that switching to vertical position kills everything.
Maybe timing has changed slightly (for whatever reason).
Try to optimize your DiSEqC setup. This might
Helmut Auer wrote:
Hi Oliver,
diseqc.conf
S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t S19.2E 9 V
...
It seems to be that switching to vertical position kills everything.
Maybe timing has changed slightly (for whatever reason).
Try to optimize your
Klaus Schmidinger schrieb:
Maybe timing has changed slightly (for whatever reason).
Try to optimize your DiSEqC setup. This might speed-up tuning:
full DiSEqC sequence:
S19.2E 11700 V 9750 [E0 10 38 F0] [E1 10 38 F0] [E1 10 38 F0]
S19.2E 9 V 10600 [E0 10 38 F1] [E1 10 38 F1] [E1 10 38
On Saturday 13 March 2004 08:43, Alfred Zastrow wrote:
Helmut Auer schrieb:
Once again ( I don't give up too fast :-). Isn't here anyone
experiencing the same problem ? On vdrportal the same error is reported.
Do I have to use different diseqc settings ? What has changed from 1.01
to 1.10
On Saturday 13 March 2004 12:30, Andrew de Quincey wrote:
On Saturday 13 March 2004 08:43, Alfred Zastrow wrote:
Helmut Auer schrieb:
Once again ( I don't give up too fast :-). Isn't here anyone
experiencing the same problem ? On vdrportal the same error is
reported. Do I have to use
On Saturday 13 March 2004 13:30, Andrew de Quincey wrote:
One thing that worries me though; if you're using 1.1.1, there isn't an
alps_bsrv2 driver any more; it was merged into the stv0299 one a while back.
???
He stated that he tried the alps_bsrv2 module from DVB.
The alps_bsrv2 is _not_
On Saturday 13 March 2004 12:44, Oliver Endriss wrote:
On Saturday 13 March 2004 13:30, Andrew de Quincey wrote:
One thing that worries me though; if you're using 1.1.1, there isn't an
alps_bsrv2 driver any more; it was merged into the stv0299 one a while
back.
???
He stated that he
On Friday 12 March 2004 20:28, Helmut Auer wrote:
Helmut Auer wrote:
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black when
reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays black.
On Saturday 13 March 2004 12:56, you wrote:
On Friday 12 March 2004 20:28, Helmut Auer wrote:
Helmut Auer wrote:
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black when
reaching SAT1, and afterwards I can tzap
Hi, could anyone with the problem please tell me the PCI device IDs for the
cards which aren't working (You can get it with lspci -vn).
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
On Saturday 13 March 2004 14:18, Andrew de Quincey wrote:
On Saturday 13 March 2004 12:56, you wrote:
On Friday 12 March 2004 20:28, Helmut Auer wrote:
Helmut Auer wrote:
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the
Be careful. The new code _works_ with BSRU6 (stv0299) and the old BSRV2
module. Remember that DiSEqC is _always_ done by the av7110 on
full-featured cards.
That is very weird.. So the new-ves1x93 must be in some mode that is
interfering with the DISEQC being sent by the av7110... I can't
Hi,
Helmut Auer schrieb:
Once again ( I don't give up too fast . Isn't here anyone
experiencing the same problem ? On vdrportal the same error is reported.
Do I have to use different diseqc settings ? What has changed from
1.01 to 1.10 in that region ?
It is definitely a ves1x93-problem. For
Be careful. The new code _works_ with BSRU6 (stv0299) and the old BSRV2
module. Remember that DiSEqC is _always_ done by the av7110 on
full-featured cards.
That is very weird.. So the new-ves1x93 must be in some mode that is
interfering with the DISEQC being sent by the av7110... I
Andrew de Quincey schrieb:
Hi, could anyone with the problem please tell me the PCI device IDs for the
cards which aren't working (You can get it with lspci -vn).
I have only limited access to my vdr-machine.
Is the information from /proc/bus/pci/devices usefull?
11063099 0 e008
On Saturday 13 March 2004 13:45, you wrote:
Hi,
Helmut Auer schrieb:
Once again ( I don't give up too fast . Isn't here anyone
experiencing the same problem ? On vdrportal the same error is reported.
Do I have to use different diseqc settings ? What has changed from
1.01 to 1.10 in
Andreas Share wrote:
Be careful. The new code _works_ with BSRU6 (stv0299) and the old BSRV2
module. Remember that DiSEqC is _always_ done by the av7110 on
full-featured cards.
That is very weird.. So the new-ves1x93 must be in some mode that is
interfering with the DISEQC being
Hi Andreas,
-0x80, 0x00, 0x31, 0xb0, 0x14, 0x00, 0xDC, 0x00,
+0x80, 0x00, 0x31, 0xb0, 0x14, 0x00, 0xDC, 0x20,
just to clarify: my ves1x93.c has the following contens:
0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xDC, 0x00,
^
What should I try now ?
--
Helmut Auer,
Helmut Auer wrote:
Hi Andreas,
-0x80, 0x00, 0x31, 0xb0, 0x14, 0x00, 0xDC, 0x00,
+0x80, 0x00, 0x31, 0xb0, 0x14, 0x00, 0xDC, 0x20,
just to clarify: my ves1x93.c has the following contens:
0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xDC, 0x00,
^
What should I try
On Saturday 13 March 2004 14:45, Helmut Auer wrote:
It's getting more and more interesting. In my case this doesn't change a
thing.
I have the same problems, when I use the alps_bsrv2 instead of the ves1x93.
Then I tried a dvb-s 1.6 with the grundig tuner and then strange things
( in my
Andrew de Quincey schrieb:
Hi, could anyone with the problem please tell me the PCI device IDs for the
cards which aren't working (You can get it with lspci -vn).
Here is a 'lspci -vn' from my vdr-machine:
00:00.0 Class 0600: 1106:3099
Subsystem:
00:09.0 Class 0480: 1131:7146 (rev 01)
Subsystem: 13c2:
Flags: bus master, medium devsel, latency 32, IRQ 17
Memory at de00 (32-bit, non-prefetchable) [size=512]
00:0a.0 Class 0480: 1131:7146 (rev 01)
Subsystem: 13c2:
Flags: bus master, medium
On Saturday 13 March 2004 09:43, Alfred Zastrow wrote:
It is definitely a ves1x93-problem. For testing purposes I load the
following modules for my rev 1.3-cards:
,,,
#insmod ves1x93 --- commented out
insmod alps_bsrv2 --- from the DVB-Tree
...
Just an idea:
Have you tried
Helmut Auer wrote:
Hello,
I have a reproducable error with the 1.1.1 release.
When zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black
when reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays black.
With 1.0.1 everything works ( and zapping is faster ).
I am
Helmut Auer wrote:
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black when
reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays black. With 1.0.1 everything works ( and zapping is
faster ). I
On Friday 12 March 2004 21:28, Helmut Auer wrote:
Helmut Auer wrote:
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black when
reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays
Hello Oliver,
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black when
reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays black. With 1.0.1 everything works ( and zapping is
faster ). I am
On Friday 12 March 2004 22:09, Helmut Auer wrote:
Hello Oliver,
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black when
reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays black. With 1.0.1
Helmut Auer schrieb:
Isn't here anybody interested ? As I said it's easy to reproduce, here
are my settings for the channels: I am using a DVB-S rev. 1.3
channels.conf: Das
Erste:11837:h:S19.2E:27500:101:102:104:0:28106:0:0:0
ZDF:11954:h:S19.2E:27500:110:120:130:0:28006:0:0:0 RTL
Andrew de Quincey schrieb:
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black when
reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays black. With 1.0.1 everything works ( and zapping is
faster
31 matches
Mail list logo
