The following patch enables the use of XXX_AUTO in channels.conf,
mainly to be used by zap and tzap.
diff -r 92cd5208d2cf lib/libdvbcfg/dvbcfg_zapchannel.c
--- a/lib/libdvbcfg/dvbcfg_zapchannel.c Mon Sep 18 21:27:12 2006 +0100
+++ b/lib/libdvbcfg/dvbcfg_zapchannel.c Sat Oct 28 12:16:04 2006
Hi,
Are there any known issues with using Hauppauge Nova-T DVB PCI cards on
kernel 2.6.18?
I've just upgraded to Fedora Core 6 which comes with kernel 2.6.18
(uname -r gives 2.6.18-1.2798.fc6).
Unfortunately both my Nova-T PCI cards are non-functional. Below is an
extract from my
tomlohave a écrit :
[EMAIL PROTECTED] a écrit :
[EMAIL PROTECTED] a écrit :
-Original Message-
Date: Fri, 27 Oct 2006 09:08:38 +0200
Subject: [linux-dvb] HVR1110, no signal lock on tda8290
From: tomlohave [EMAIL PROTECTED]
To: linux-dvb@linuxtv.org
Hi,
After some researchs, it seems
Hi,
I've just tried Partick's latest DiB7000M driver (via hg clone
http://linuxtv.org/hg/~pb/v4l-dvb) on a linux 2.6.16 kernel and it
can't detect a frontend.
I get:
usb 1-8: new high speed USB device using ehci_hcd and address 12
usb 1-8: configuration #1 chosen from 1 choice
dib0700:
On Fri Oct 27, 2006 at 05:18:00PM +0100, Torgeir Veimo wrote:
Any update on this?
Is the hardware spec for the remote input available for this card?
I've been trying to get this working, but with absolutely no success :(
I've done a snoop on the device under Windows (attached) but this
Hi, Tom
[EMAIL PROTECTED] wrote:
Hartmut Hackmann a écrit :
Hi. Tom
snip
TNT ok
Analogic TV : OK
Capture device : not tested
Remote control : Nothing works (perhaps ...)
Radio : not tested
Radio is Ok
Bye, Bye
Well, that's all for today !
Good luck
Hartmut
Thanks :)
Tom
On Sun, 2006-10-29 at 20:18 +, Torgeir Veimo wrote:
On 29 Oct 2006, at 16:09, Patrick Boettcher wrote:
Hi Torgeir,
On Sat, 28 Oct 2006, Torgeir Veimo wrote:
On 28 Oct 2006, at 00:35, Torgeir Veimo wrote:
Am not sure where to start looking. I've included my dmesg output
On 29 Oct 2006, at 22:21, Jon Burgess wrote:
To convert the channel number into a frequency, first calculate 306 +
8*N MHz, where N is the channel number. Then add or subtract 167 kHz
depending on the + or - in the tables above.
e.g. Crystal palace BBC(Multiplex 1) is show as 25 -
I'm posting this to the list for final review before requesting merge into
master.
lgdt330x: SNR and signal strength reporting
Update the SNR calculations to use the new dvb_math log function, and add
SNR calculations for all supported modulations for both lg dt3302 and dt3303.
The QAM
El dom, 29-10-2006 a las 17:29 +0100, Patrick Boettcher escribió:
On Sat, 21 Oct 2006, Jose Carlos Garcia Sogo wrote:
El mar, 17-10-2006 a las 14:54 +0200, Patrick Boettcher escribió:
Hi,
in my repository (http://linuxtv.org/hg/~pb/v4l-dvb) I just committed a
first working
On Sat, Oct 28, 2006 at 07:09:32PM +0100, Andrew Lyon wrote:
Is there any util I can use with Technotrend S-1500 with CI to get
into the cam menu? The cam has settings that I need to change,
apparently with a set top box you can go into the cam menu, but I
cannot find any way with a dvb card on
Hello all,
I have an Hauppauge Nova-T Stick and I tried it on a debian system with the
kernels 2.6.17 and 2.6.18. After installing it (with this stuff for example
http://linuxtv.org/hg/v4l-dvb?ca=a80a23f896b2;type=gz ), everything worked
perfectly. I watched tv with kaffeine for hours.
But
On Sun, 2006-10-29 at 20:47 +, Torgeir Veimo wrote:
On 29 Oct 2006, at 16:09, Patrick Boettcher wrote:
Hi Torgeir,
On Sat, 28 Oct 2006, Torgeir Veimo wrote:
On 28 Oct 2006, at 00:35, Torgeir Veimo wrote:
Am not sure where to start looking. I've included my dmesg output
Hi. Tom
snip
TNT ok
Analogic TV : OK
Capture device : not tested
Remote control : Nothing works (perhaps ...)
Radio : not tested
Radio is Ok
Bye, Bye
Well, that's all for today !
Good luck
Hartmut
Thanks :)
Tom
So you have the board fully working now?
I am in doubt about this:
On 29 Oct 2006, at 22:32, Jon Burgess wrote:
In your original post you mentioned that you had an older card which
worked fine with this same setup. Is this still correct that if you
run
this same test with the other card then it will receive a signal OK?
If this is the case, then your
I demand that Graeme Hilton may or may not have written...
Are there any known issues with using Hauppauge Nova-T DVB PCI cards on
kernel 2.6.18?
I've just upgraded to Fedora Core 6 which comes with kernel 2.6.18 (uname
-r gives 2.6.18-1.2798.fc6).
That's probably really 2.6.19-git*.
On 29 Oct 2006, at 16:09, Patrick Boettcher wrote:
Hi Torgeir,
On Sat, 28 Oct 2006, Torgeir Veimo wrote:
On 28 Oct 2006, at 00:35, Torgeir Veimo wrote:
Am not sure where to start looking. I've included my dmesg output
below;
using '/dev/dvb/adapter0/frontend0' and
Hi Torgeir,
On Sat, 28 Oct 2006, Torgeir Veimo wrote:
On 28 Oct 2006, at 00:35, Torgeir Veimo wrote:
Am not sure where to start looking. I've included my dmesg output below;
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 52983 Hz
video pid 0x,
I have tt budget s1102 with Philips SU1278/S tuner, not
ALPS BSRU6.
It's init file is a budget-ci.c.
I found many distinctions between stv0299 setting in
bsru6.h and budget-ci.c, may be in this is a trouble?
I not use 2.4 kernel, but I will do it for testing.
sorry bad english...
On Sat, 28
==
Date: Sat, 28 Oct 2006 15:31:58 +0200
From: Thomas Dressler [EMAIL PROTECTED]
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] kernel 2.6.18.1 sa7146
==
hi!
at first: sorry my english is bad.
i want compile kernel 2.6.18.1 with the
I'm currently improving VDR's CAM handling, and while doing so
I came across what seems to be a bug in the AV7110 driver code.
If I do
int fd = open(/dev/dvb/adapter0/ca0, O_RDWR);
ca_slot_info_t sinfo;
sinfo.num = 0;
ioctl(fd, CA_GET_SLOT_INFO, sinfo);
to check whether the CI adapter
Hi,
On Sun, 29 Oct 2006, Michael Krufky wrote:
I'm posting this to the list for final review before requesting merge into
master.
You get what you've asked for:
lgdt330x: SNR and signal strength reporting
Update the SNR calculations to use the new dvb_math log function, and add
SNR
Hi Oliver!
On Sat, 28 Oct 2006 03:19:36 +0200
Oliver Endriss [EMAIL PROTECTED] bubbled:
Martin Zwickel wrote:
Hi there!
I have a small problem:
I get no audio from my DVB-S card since a few months.
But I can't remember what could have changed that.
There is no audio from the
23 matches
Mail list logo
