manu a écrit :
On 03/11/2008 02:27:31 AM, Vladimir Prudnikov wrote:
I'm getting late buffers with vlc on some transponders (DVB-S, same
parameters, good signal guaranteed) while everything is fine with
others. Using multiproto and TT S2-3200.
Anyone having same problems?
Can you give
Good morning to everyone,
I tested the Stick with windows and it found channels ok.. So what shall I
do next?
-antti-
2008/3/18, Antti Luoma [EMAIL PROTECTED]:
Hi,
Tested with same results :( (no channels...)
Tomorrow I'l (hmm today, its getting late) test this with windows that it
works
Are you sure you tested with the new compiled module? Could you verify that
in your v4l-dvb/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c you have
this on the stk7070p_frontend_attach first line;
dib0700_set_gpio(adap-dev, GPIO6, GPIO_OUT, 0);
Because I remember with 72e that with
Could you try with the files I send?
.config must go to v4l-dvb/v4l/ folder (it's for just compiling dibcom
stuff),
dib0700_devices.c and dvb-usb-ids.h go to
v4l-dvb/linux/drivers/media/dvb/dvb-usb/
Albert
2008/3/18, insomniac [EMAIL PROTECTED]:
On Mon, 17 Mar 2008 23:59:07 +0100
Albert
On Sun, 16 Mar 2008 11:31:37 +0100
Matthias Schwarzott [EMAIL PROTECTED] wrote:
Hi there!
I updated this patch to support both Avermedia A700 cards (AverTV DVB-S Pro
and AverTV DVB-S Hybrid+FM).
The RF input of the Hybrid+FM card (with XC2028 tuner) is still untested.
I would be happy
On Dienstag, 18. März 2008, Mauro Carvalho Chehab wrote:
On Sun, 16 Mar 2008 11:31:37 +0100
For this to work, you'll need to set xc3028 parameters. This device needs a
reset during firmware load. This is done via xc3028_callback. To reset, you
need to turn some GPIO values, and then, return
On Tue, 18 Mar 2008 13:39:12 +0100
Matthias Schwarzott [EMAIL PROTECTED] wrote:
On Dienstag, 18. März 2008, Mauro Carvalho Chehab wrote:
On Sun, 16 Mar 2008 11:31:37 +0100
For this to work, you'll need to set xc3028 parameters. This device needs a
reset during firmware load. This is done
On Mon, 17 Mar 2008 19:28:32 +
Richard (MQ) [EMAIL PROTECTED] wrote:
Mauro Carvalho Chehab wrote:
Sorry for a late answer. Too busy from my side :(
And apologies from me for very slow response too. I've been away, and
although I'm back I'm now using a different box for this problem,
On Sat, 15 Mar 2008 18:33:56 +0900
timf [EMAIL PROTECTED] wrote:
[ 15.00] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid
TV/Radio (A16D) [card=137,autodetected]
[ 15.296000] tuner' 2-0061: Setting mode_mask to 0x0e
[ 15.296000] tuner' 2-0061: chip found @ 0xc2
Hi all, having a look to the pinnacle card of Andrea Barberio, we find out
that it uses a dib7770-PA with integrated tuner. It seems to load correctly
the firmware but we don't know how to comunicate with the tuner. Anybody
knows which tuner we should use? and if we can work with this chip as
Hi Hartmut,
Apologies for the length of this msg, I'm not sure what info you may
need, so I'm trying to show you that all is not right.
1) New install of ubuntu 7.10 i386.
2) Install Me-tv, Tvtime.
Me-tv, in the absence of a channels.conf, scans
via /usr/share/doc/dvb-utils/examples/scan/dvb-t
Albert Comerma wrote:
Hi all, having a look to the pinnacle card of Andrea Barberio, we find
out that it uses a dib7770-PA with integrated tuner. It seems to load
correctly the firmware but we don't know how to comunicate with the
tuner. Anybody knows which tuner we should use? and if we
On Tue, 18 Mar 2008 17:16:20 +0200
Antti Palosaari [EMAIL PROTECTED] wrote:
dib7770 is 3 in 1 solution, usb-bridge + demodulator + tuner. You can
try dib7070 tuner driver. STK7070P looks rather similar (but less
integrated).
If I'm not wrong, after taking a look at the sources, dib7070
On Tue, 18 Mar 2008 16:38:12 +0100
insomniac [EMAIL PROTECTED] wrote:
On Tue, 18 Mar 2008 17:16:20 +0200
Antti Palosaari [EMAIL PROTECTED] wrote:
dib7770 is 3 in 1 solution, usb-bridge + demodulator + tuner. You
can try dib7070 tuner driver. STK7070P looks rather similar (but
less
insomniac wrote:
On Tue, 18 Mar 2008 16:38:12 +0100
insomniac [EMAIL PROTECTED] wrote:
On Tue, 18 Mar 2008 17:16:20 +0200
Antti Palosaari [EMAIL PROTECTED] wrote:
dib7770 is 3 in 1 solution, usb-bridge + demodulator + tuner. You
can try dib7070 tuner driver. STK7070P looks rather similar
On Tue, 18 Mar 2008 18:15:27 +0200
Antti Palosaari [EMAIL PROTECTED] wrote:
DVB: registering frontend 0 (DiBcom 7000PC)...
mt2060 I2C read failed
I don't understand how dib7070p_tuner_attach could call mt2060.
Is there anything I can do to make you debug it?
--
Andrea Barberio
[EMAIL
16 matches
Mail list logo
