side - a year or so back was around $40.
Regards, Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http
instead? (would this still let me
boot any pc with it?).
Thanks for ideas or suggestions.
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please
not realized it was part of the live cd.
Thanks again, Bryce.
From: Kevin Harvey [mailto:kev...@gmail.com]
Sent: Friday, July 30, 2010 10:07 AM
To: linux-users@it.canterbury.ac.nz
Subject: Re: LiveCD on a flash drive - make it updatable
for that Nick - that was what I was looking for.
Regards, Bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http
).
This setting is so version stays at the LTS version.
Does anyone know where to set this without a gui interface as when I get
updates I want this server to stay on the LTS version?
Or have I got it wrong and nothing can change unless I run
'do-release-upgrade' manually?
Regards,
Bryce Stenberg
' or do I download it and do it from cd?
What is the best way to upgrade this server to 10.04 lts?
Thanks,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy
-Original Message-
From: Hadley Rich [mailto:h...@nice.net.nz]
Sent: Friday, April 30, 2010 2:51 PM
On Fri, 2010-04-30 at 14:44 +1200, Bryce Stenberg wrote:
What is the best way to upgrade this server to 10.04 lts?
`sudo do-release-upgrade` is the supported way.
Cheers - thanks
this might not be working for
me, or where to look for solution?
Thanks, Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full
deb http://nz2.archive.ubuntu.com/ubuntu/ karmic main restricted
deb-src http://nz2.archive.ubuntu.com/ubuntu/ karmic main restricted
Worth trying the other one (:
Thanks Steve - changed all entries to the 'nz2' and now appears to want
to work.
Cheers - Bryce.
DISCLAIMER: If you have
mind is how it should be if they
replace with a brand new item... Anyway - don't buy a WAG160N.
-Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original
:
http://www.miracleas.com/BAARF/RAID5_versus_RAID10.txt
Regards,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER
-bd81-457927f82142 noneswapsw
0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0
0
/dev/sde1 /media/usbdrive autorw,user,exec0 0
Cheers, Bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately
is this 'soft link' thing, is it like a windows shortcut?
Cheers, Bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http
to 0 and all should be well.
Thanks Steve, I set it to '1' to force it to be checked (as per Hadley's
comment) and it appears to have booted up fine without errors.
Cheers everyone,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply
from
the beginning (although then I don't learn why it is screwed up but it
might at least work)?
Thanks for any insight you can provide me.
Regards,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect
drive, not sure what
to do in linux.
Thanks,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http
was trying to get it all in one LV to simplify backup/restore
procedures, but looks like it can't be done without going via a
'horrible answer' :)
Thanks Craig.
Regards, Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile
Can anybody help in sparing ubuntu9.10 disk pl.
I work in Lincoln Rd and can burn one for you if that is handy to you?
Is only 32bit version (although could download 64bit if you require).
Regards,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
these colours so...
I need a good SSH client to use on my windows machine.
Any recommendations?
Thanks,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy
, tunnelier prompts for
username password and connects fine).
Ideas? (may be Monday before I see these as have to trot off home
now...)
Thanks
-Bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
others have commented on Tunnelier forum about
colour issues also so must be problem with that I'm thinking.
-Bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original
for moodle to help with industry training.
Thanks for all your help and discussion.
Regards,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please
as the installation can proceed?
Regards,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http://www.hrnz.co.nz
LVM's for there ability to take almost instant 'snapshots' of
volumes to then utilize in full backups of the system including live
databases (after appropriate freezing/blocking of database and flush of
buffers etc to disk ready for snapshot).
Thanks, Bryce.
DISCLAIMER: If you have received
, or missed something
off?
I was hoping someone could give me ideas of what to look at to locate
the problem as I really haven't got my head around how linux handles
things like network cards and how the drivers fit in...
Thanks in advance.
Regards,
Bryce Stenberg.
DISCLAIMER: If you have
Cheers Craig,
With ifconfig -a I was able to see it was using eth1 so changed
/etc/network/interfaces to use eth1 and it is all good now.
Regards, Bryce.
-Original Message-
From: Craig Falconer [mailto:cfalco...@totalteam.co.nz]
Sent: Wednesday, 27 January 2010 1:23 p.m.
To: linux
Cheers Hadley - exactly my problem. Regards, Bryce.
-Original Message-
From: Hadley Rich [mailto:h...@nice.net.nz]
Sent: Wednesday, 27 January 2010 1:31 p.m.
To: linux-users@it.canterbury.ac.nz
Subject: Re: Ubuntu server: no network after restore to new hardware?
On Wed, 27 Jan
Thanks Jim, I'll have a look at those rules and see what I make of it.
Regards, Bryce.
-Original Message-
From: jim.cheet...@gmail.com [mailto:jim.cheet...@gmail.com]
On Behalf Of Jim Cheetham
Sent: Wednesday, 27 January 2010 1:42 p.m.
To: linux-users
Subject: Re: Ubuntu server
-Original Message-
From: Roger Searle [mailto:ro...@stepahead.org.nz]
Sent: Wednesday, December 23, 2009 10:11 AM
Hi Bryce, thanks for sharing your script, it has given me ideas for
when.snip.
Thanks for your tips Roger - glad my scripts help you.
I did see mention of using
a multi-character value and assign it to a variable?
Also, is there an equivalent of the DOS 'pause' command under bash?
Cheers, Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
with gas now...
Thanks, bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http://www.hrnz.co.nz/eDisclaimer.htm
-Original Message-
From: Nick Rout [mailto:nick.r...@gmail.com]
Sent: Tuesday, December 22, 2009 10:42 AM
Just remember that linux/unix scripts are supposed to be small and do
one thing well. snip
Thanks for the additional info Nick.
-bryce.
DISCLAIMER: If you have
' to get numbers
echo You are changing the uuid values to point to the boot partitions
uuid - /dev/sda5 in our case
# end.
Thanks and Regards,
Bryce Stenberg
IT Department
Harness Racing New Zealand Inc
to get it working.
But is still not good, and won't hibernate anymore...
So, does anyone know an easy way to downgrade the installation back to
Ubuntu 9.04?
Thanks,
Bryce Stenberg
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email
until Monday now as off home -
thanks for your opinions.
Regards,
Bryce Stenberg
IT Department
Harness Racing New Zealand Inc
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
The correct answer is
sudo update-rc.d gdm remove
this will remove gdm (which starts X) from startup.
I love the rich number of options to do anything under Linux.
This answer from Nick above (with -f flag) was the one that worked for
me in the end.
Thanks everyone,
Bryce Stenberg
.
Regards,
Bryce Stenberg
IT Department
Harness Racing New Zealand Inc
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full
-Original Message-
From: steve [mailto:st...@greengecko.co.nz]
Sent: Monday, 24 August 2009 6:58 p.m.
To: linux-users@it.canterbury.ac.nz
Subject: RE: Networking - equivalent of windows 'alternate
configuration'
setting?
On Mon, 2009-08-24 at 15:02 +1200, bryce wrote:
... I've got
-Original Message-
From: steve [mailto:st...@greengecko.co.nz]
Sent: Friday, 21 August 2009 3:30 p.m.
Bryce,
If you set down exactly what you want to do, I'm happy to make a stab
at
it. Mind you, when I go through that process, it often magically sorts
itself out before my eyes!
Cheers
success.
Someone else suggested I try 'ifplugd' which may allow me to script
it,
but I haven't gone down that path yet.
Regards,
Bryce Stenberg
Let me know if it works...
Steve
DISCLAIMER: If you have received this email in error, please notify
us
immediately by reply email, facsimile
(eth0): deactivating
device (reason: 0).
Maybe the lease stuff doesn't work properly?
Regards,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original
configuration when I have to.
Regards,
Bryce Stenberg
-Original Message-
From: steve [mailto:st...@greengecko.co.nz]
Sent: Thursday, 20 August 2009 4:33 p.m.
To: linux-users@it.canterbury.ac.nz
Subject: RE: Networking - equivalent of windows 'alternate
configuration'
setting?
On Thu
to 'automatic (dhcp)' losing previously entered
manual address. I just thought there must be a way for this to be all
automatic...
Regards,
Bryce Stenberg
IT Department
Harness Racing New Zealand Inc.
DISCLAIMER: If you have received this email in error, please notify us
immediately
-Original Message-
From: jim.cheet...@gmail.com [mailto:jim.cheet...@gmail.com] On Behalf
Of
Jim Cheetham
Sent: Thursday, 20 August 2009 10:55 a.m.
So, edit /etc/dhcp3/dhclient.conf, and look at the commented-out stuff
at the bottom :-)
I've been trying this out using 'lease' but can't
(or whatever it is
called) without a reboot? Right clicking and choosing enable/disable
doesn't do trick.
Is there a way to see the output or parsing of the dhclient.conf file to
see what it is not happy with?
Thanks,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify
: info (eth0): deactivating device (reason: 40).
After that I can't keep trying until I reboot pc to reactivate the
device.
So, is there command to activate a device once it has been
'deactivated'?
Restarting dhcp client is not sufficient.
Regards,
Bryce Stenberg
DISCLAIMER: If you have
correctly.
Regards, Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http://www.hrnz.co.nz/eDisclaimer.htm
isn't very satisfactory.
Thanks.
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http
that was what it was called.
It didn't help that its icon in 'add to panel' is something completely
different.
Thanks again, Bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200
for this glitch on
this machine Ubuntu has been looking pretty good so far.
It certainly is related to the software and/or config.
I'll keep searching and see what I can figure out.
Thanks for your help.
Regards, Bryce.
DISCLAIMER: If you have received this email in error, please notify us
the driver issue on 9.04
2. Downgrade to 8.10
3. Upgrade to the unreleased 9.10.
Thanks for the tip - I'll look into it.
Regards,
Bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200
,
Bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http://www.hrnz.co.nz/eDisclaimer.htm
blockage (no fans
sucking the dust in probably helps), it feels like a lot of heat is
dissipated directly through the casing which is a magnesium alloy of
some sort.
Regards, Bryce.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect
able to be blanked is good on
a notebook.
Any other suggestions welcome.
Regards,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer
,
Bryce Stenberg
IT Department
Harness Racing New Zealand Inc.
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy the original. Please refer to full DISCLAIMER at
http
something as that doesn't fire it up. What application do I tell
it to use to install the .run file? I tried dpkg but I can't make that
launch the application installer like the right click - open in
terminal did.
Can anyone give me a clue please?
Regards,
Bryce Stenberg.
DISCLAIMER: If you have
Sorry for late reply - evolution keeps locking up on me... back in
windows now..
Anyway, Thanks for that Steve - that got my app installed.
Next week I'll hopefully get it running the way I want.
Regards,
Bryce Stenberg
IT Department
Harness Racing New Zealand Inc.
-Original
, it
seems to want to install itself to my second partition on disk1 - adding
extra partitions and resizing.
I don't want this partition touched.
Can anyone please tell me how to get it installed to Disk2?
Thanks,
Bryce Stenberg.
DISCLAIMER: If you have received this email in error, please
Yes - that let me partition my empty drive - but nowhere could I find a
way of selecting this drive for the install.
-bryce.
-Original Message-
From: steve [mailto:st...@greengecko.co.nz]
Sent: Friday, 19 June 2009 2:32 p.m.
To: linux-users@it.canterbury.ac.nz
Subject: Re: Ubuntu
for help before asking here. I was hoping someone may
have some insight into why it is going wrong on my pc?
-Bryce.
-Original Message-
From: jim.cheet...@gmail.com [mailto:jim.cheet...@gmail.com]
On Behalf Of Jim Cheetham
Sent: Friday, 19 June 2009 2:37 p.m.
To: linux-users
miss the obvious :-).
And I'll look out for that alternate ubuntu for when we come to setting
up servers.
Thanks, Bryce Stenberg
DISCLAIMER: If you have received this email in error, please notify us
immediately by reply email, facsimile or collect telephone call to +64 3
9641200 and destroy
Thanks Kerry - testing server setup will be some time off for now.
-bryce.
-Original Message-
From: 164qv.a...@gmail.com [mailto:164qv.a...@gmail.com] On
Behalf Of Kerry Mayes
No, no, there's a different disc again for servers!
2009/6/19 Bryce Stenberg br...@hrnz.co.nz
will get me a brand new replacement unit with only one month
of warranty!).
Is this right for them to be able to do this - dodgy manufacturers can
just keep giving out cheap dodgy replacements until the warranty runs
out...
Regards, Bryce Stenberg.
DISCLAIMER: If you have received this email
back to TRK - their updater looks like it was initially written for
running from a CD.
Thanks,
Bryce Stenberg
Thanks for that Eliot.
I finally got it work, once I'd added a mtools.conf file - good tip :)
Regards,
Bryce Stenberg
IT Department
Harness Racing New Zealand Inc.
-Original Message-
From: ewb...@gmail.com [mailto:ewb...@gmail.com] On Behalf Of Eliot
Blennerhassett
Sent
in NZ.
-Regards, Bryce Stenberg.
I suspect anti-static strap won't
help unless hooked up to a good earth - someone please correct me if
this wrong and I'm not sure what you do with some motherboards these
days that don't completely power off until you disconnect the power
cord.
Regards, Bryce Stenberg.
be damaged by the charge now on the
earth rail? I guess I don't understand where this charge goes to if you
are not earthed? Can you offer insight into this? Thanks, Bryce
Stenberg.
Personally, I find these things highly overrated, and consciously
touching
the equipment before working on any part
Hi,
Are you now plugged into a hub instead of
a switch? Or somehow listening in promiscuous mode on the network adapter?
Otherwise, your network adapter, if into a
switch should only be seeing traffic destined just for it, and some broadcast
traffic.
Regards,
Bryce Stenberg
logout. I see she still gets her right and left mouse clicks confused
so probably hit the delete context menu item off the panel.
Anyway, is there an easy way to get the default panel back
again?
Regards,
Bryce Stenberg.
I did try the add to panel, but 'menu bar' - I'll try that one once I
get home. Thanks.
Bryce.
-Original Message-
From: Roy Britten [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 24, 2006 4:57 PM
To: linux-users@it.canterbury.ac.nz
Subject: Re: Restore default panel on gnome
And this looks a good way too, if the add menu bar doesn't do I'll give
this a go.
Thanks, Bryce.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 24, 2006 5:03 PM
To: linux-users@it.canterbury.ac.nz
Subject: Re: Restore default panel
computer at home is the non-functional linux one so I
have to try to send mails from work and recall what's actually going on
.
Thanks,
Bryce Stenberg.
Thanks Andrew,
I installed the gnome interface, I'll see how I get on with that extra info you
supplied. I did see a thread labelled 'kppp' or something but had deleted
them, not realizing it was discussing dial-up, I shall look that up on web
archive as well.
Regards,
Bryce Stenberg
know your stuff.
I will try to stay on top of answers (should flow much easier when the machine
I email from is in the same location as the one I'm trying to get support for,
or even better, is the one I am trying to get support for).
Regards,
Bryce Stenberg.
winmail.dat
it be obvious? Or is not obvious because I
picked the wrong port for the modem maybe or modem is not going or similar?
Can someone please instruct me on how to dial-up. Thanks.
Regards,
Bryce Stenberg.
Hi Rik
-Original Message-
From: Rik Tindall [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 10, 2006 5:41 PM
To: linux-users@it.canterbury.ac.nz
Subject: Re: Edit xorg.conf file, root logon
Bryce Stenberg wrote:
Thanks all for your help so far, but I'm still struggling
Bryce Stenberg [EMAIL PROTECTED] wrote:
If I edit it with 'sudo -e xorg.conf' to get root I still can't save
it.
I can't login as 'root' - should I be able to in Ubuntu? (I don't
recall
specifying a password for root during install).
sudo vi /etc/X11/xorg.conf will let you edit it.
sudo
Hi,
-Original Message-
From: Nick Rout [mailto:[EMAIL PROTECTED]
Sent: Sunday, August 06, 2006 9:36 AM
To: linux-users@it.canterbury.ac.nz
Subject: Re: Newbie questions - Ubuntu...
On Sun, 06 Aug 2006 09:01:21 +1200
Bryce Stenberg [EMAIL PROTECTED] wrote:
1. Screen refresh
- a gigabyte GA-6VEML - google
indicates under windows it would use a Trident 8500 vga driver. Does
this have any bearing on anything?
I'm still looking at the modem issue...
(and sorry for top posting - using outlook ).
Regards,
Bryce Stenberg
-Original Message-
From: Nick Rout [mailto
can anyone please tell me the program names and where
to find them, or do I need to download them from somewhere. The installer
seemed to be looking for gcc and make or makefile by default I think.
Many thanks,
Bryce Stenberg.
to copy what I just downloaded to a CD
and have my home machine get its updates from this instead?
(Im not sure but it looks like maybe the files it
downloaded went to /var/cache/apt/archives would this be
correct? Would I just copy all the files here to a CD?)
Thanks,
Bryce Stenberg.
format and when I come to play it today it doesn't work.
So, can anyone please give me a currently working link to the clip, or
even email me a copy (if file size less than 5Mb otherwise dropped by
company email server).
Many thanks,
Bryce.
Thanks everyone. Now have it and have learnt a lot more about google
options, embedded players and streaming in the process.
Regards, Bryce.
http://homepages.ihug.co.nz/~nickr/Telecon.mp4
--
Nick Rout [EMAIL PROTECTED]
Could maybe look for HP Jornada 720? People have tried running linux on
it - don't know what success rate.
Is clamshell, can plug in external monitor, not sure about keyboard
(possibly through usb port). Google for Jornada and linux.
Regards,
Bryce Stenberg.
-Original Message
).
I guess my point is that how you use your battery has a big influence on
it's lifespan.
Regards,
Bryce Stenberg
-Original Message-
From: Douglas Royds [mailto:[EMAIL PROTECTED]
Sent: Thursday, 1 September 2005 9:17 a.m.
To: linux-users@it.canterbury.ac.nz
Subject: Re: ot
houses of my place there are three people who definitely want
JetStream, and probably much more across the whole community of Leithfield
and Leithfield Beach (200 - 300 houses at a guess). What's a good way to
pressure telecom to make it happen?
Regards,
Bryce Stenberg.
-Original
From: Nick Rout [mailto:[EMAIL PROTECTED]
Sent: Monday, 24 January 2005 12:00 p.m.
To: linux-users@it.canterbury.ac.nz
On Mon, 24 Jan 2005 10:18:40 +1300
Bryce Stenberg [EMAIL PROTECTED] wrote:
Two hours before technician due to turn up he phones to check that I do
live at Leithfield Beach
Thanks Andy, I checked out the specs on the router and it does do NAT. No
DHCP however, but it's only a couple of machines - I'll just set there IP
addresses manually.
I think I'll go ahead and unwrap it all and see what happens.
Thanks again, Bryce.
-Original Message-
From: Andy
- it was part of special promotion they had last month with free modem.
Can anyone please advise me?
Thanks,
Bryce Stenberg.
DISCLAIMER: http://www.hrnz.co.nz/eDisclaimer.htm
Engineer for a private education provider.
Cheers
Bryce.
Derek Smithies wrote:
Hi,
In the past, there have been many discussions about how we can promote
linux. This sort of got no where. An unfortunate situation. Let us have
something a bit more concrete.
I propose that we offer to do a rollout
know what telecom did with all the Nokia M1122 routers that
they use to rent to people in the early Jetstream(?) days, and then took
them back as people purchased their own routers? (maybe their is a warehouse
somewhere full of them?).
TIA.
Regards,
Bryce Stenberg
(Harness Racing New Zealand
know
why they are so limited).
Thanks,
Bryce Stenberg.
-Original Message-
From: CF [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 24 September 2003 11:08 a.m.
To: Linux Users Group
Subject: Re: OT -ADSL router capable of multiple VPN connections to same
serve r?
On Wed, 2003-09-24
and that
other one over there and turn it on. They don't want yet another computer
just to get a connection.
However, we have now purchased one of the Nokia M1122's from Trademe. Thank
you.
Bryce Stenberg.
-Original Message-
From: Nick Rout [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 24
bandwidth (can get 2Mbit/sec within NZ do does anyone know of a New Zealand
site for downloading from?
I'll get back to kdat some other time once I'm sure I can get everything
working from the command line.
Thanks for the help,
Bryce Stenberg.
-Original Message-
From: Nick Rout
directory and a
locale directory.)
Regards,
Bryce Stenberg.
Original Message-
From: David Zanetti [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc:
Subject:Re: How to mount a scsi tape drive?
Reply-To: [EMAIL
,
Bryce Stenberg
CAUTION: This email message and accompanying data may contain information
that is confidential and subject to legal privilege. If you are not the
intended recipient you are notified that any use, dissemination,
distribution or copying of this message or data is prohibited. If you
updates)?
I'm away for the next five days but when I get back I'll double check kde's
current version - maybe I already have it - although the install was done
back in November/December last year so is unlikely.
Thanks,
Bryce Stenberg.
-Original Message-
From: C Harland [mailto:[EMAIL
have any ideas on why this would be?
I was at least expecting the latest KDE packages to be listed for update.
Thanks for any insights.
Regards,
Bryce Stenberg.
sorry about lengthy disclaimer following - can't get rid of it
CAUTION: This email message and accompanying data may contain
please?
Regards,
Bryce Stenberg.
CAUTION: This email message and accompanying data may contain information
that is confidential and subject to legal privilege. If you are not the
intended recipient you are notified that any use, dissemination,
distribution or copying of this message or data
1 - 100 of 105 matches
Mail list logo