Kent Kostuk wrote:
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx DOS prompt and get: a
lot of text and then configure: error: cannot find chkconfig.ltx script
This makes me think I have an error in my PATH
I did a re-install off the latest version and it worked. I just
followed my original procedures, so the updated software must have been
solution.
Thanks to everyone for the help and time spent on my install problem.
Kent
Angus Leeming wrote:
Kent Kostuk wrote:
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx DOS prompt and get: a
lot of text and then configure: error: cannot find chkconfig.ltx script
I would type sh configure if you
Kent Kostuk wrote:
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx DOS prompt and get: a
lot of text and then configure: error: cannot find chkconfig.ltx script
This makes me think I have an error in my PATH
I did a re-install off the latest version and it worked. I just
followed my original procedures, so the updated software must have been
solution.
Thanks to everyone for the help and time spent on my install problem.
Kent
Angus Leeming wrote:
Kent Kostuk wrote:
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx DOS prompt and get: a
lot of text and then configure: error: cannot find chkconfig.ltx script
I would type sh configure if you
Kent Kostuk wrote:
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx> DOS prompt and get: a
lot of text and then "configure: error: cannot find chkconfig.ltx script"
This makes me think I have an error in my PATH
I did a re-install off the latest version and it worked. I just
followed my original procedures, so the updated software must have been
solution.
Thanks to everyone for the help and time spent on my install problem.
Kent
Angus Leeming wrote:
Kent Kostuk wrote:
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx> DOS prompt and get: a
lot of text and then "configure: error: cannot find chkconfig.ltx script"
I would type "sh configure"
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx DOS prompt and get: a
lot of text and then configure: error: cannot find chkconfig.ltx script
This makes me think I have an error in my PATH statment. Here is my
Kent Kostuk wrote:
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx DOS prompt and get: a
lot of text and then configure: error: cannot find chkconfig.ltx script
I would type sh configure if you are running
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx DOS prompt and get: a
lot of text and then configure: error: cannot find chkconfig.ltx script
This makes me think I have an error in my PATH statment. Here is my
Kent Kostuk wrote:
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx DOS prompt and get: a
lot of text and then configure: error: cannot find chkconfig.ltx script
I would type sh configure if you are running
First, I checked textclass.lst: it's there and non-zero.
Second, I replace sed.
Third, I type configure at the c:\lyx32\share\lyx> DOS prompt and get: a
lot of text and then "configure: error: cannot find chkconfig.ltx script"
This makes me think I have an error in my PATH statment. Here is my
Kent Kostuk wrote:
> First, I checked textclass.lst: it's there and non-zero.
>
> Second, I replace sed.
>
> Third, I type configure at the c:\lyx32\share\lyx> DOS prompt and get: a
> lot of text and then "configure: error: cannot find chkconfig.ltx script"
I would type "sh configure" if you
Kent Kostuk wrote:
I am having some difficulties getting LyX 1.3.5 for Win32 to start. When
I attempt to execute lyx.exe I get a dialog box with the following text:
LyX wasn't able to find any layout description!
Check the contents of the file textclass.lst
Sorry, has to exit :-(
A reinstall did
Kent Kostuk wrote:
I am having some difficulties getting LyX 1.3.5 for Win32 to start. When
I attempt to execute lyx.exe I get a dialog box with the following text:
LyX wasn't able to find any layout description!
Check the contents of the file textclass.lst
Sorry, has to exit :-(
A reinstall did
Kent Kostuk wrote:
I am having some difficulties getting LyX 1.3.5 for Win32 to start. When
I attempt to execute lyx.exe I get a dialog box with the following text:
LyX wasn't able to find any layout description!
Check the contents of the file "textclass.lst"
Sorry, has to exit :-(
A reinstall
I am having some difficulties getting LyX 1.3.5 for Win32 to start.
When I attempt to execute lyx.exe I get a dialog box with the following
text:
LyX wasn't able to find any layout description!
Check the contents of the file textclass.lst
Sorry, has to exit :-(
A reinstall did not make this
Kent Kostuk wrote:
I am having some difficulties getting LyX 1.3.5 for Win32 to start. When
I attempt to execute lyx.exe I get a dialog box with the following text:
LyX wasn't able to find any layout description!
Check the contents of the file textclass.lst
Seems that LyX can't find your MikTeX.
I was instructed to try opening yap: that worked.
I was then instructed to compile the attached file from a console: that
worked.
I then checked if miktex was in my path. I see c:\texmf\miktex\bin in
my path.
Anyone have another suggestion?
Kent
Kent Kostuk wrote:
I was instructed to try opening yap: that worked.
I was then instructed to compile the attached file from a console: that
worked.
I then checked if miktex was in my path. I see c:\texmf\miktex\bin in
my path.
Anyone have another suggestion?
OK if that works, assure that
I get the same error if I try to run lyx from the console command (I had
tried this previously and just to make sure, I tried again).
It appears that the subfolders are write enabled for everyone.
Any other suggestions?
Kent
OK if that works, assure that the installation folder of LyX and all
Kent Kostuk wrote:
I get the same error if I try to run lyx from the console command (I had
tried this previously and just to make sure, I tried again).
Could you send us the text of the console window while reconfiguring LyX.
regards Uwe
I am having some difficulties getting LyX 1.3.5 for Win32 to start.
When I attempt to execute lyx.exe I get a dialog box with the following
text:
LyX wasn't able to find any layout description!
Check the contents of the file textclass.lst
Sorry, has to exit :-(
A reinstall did not make this
Kent Kostuk wrote:
I am having some difficulties getting LyX 1.3.5 for Win32 to start. When
I attempt to execute lyx.exe I get a dialog box with the following text:
LyX wasn't able to find any layout description!
Check the contents of the file textclass.lst
Seems that LyX can't find your MikTeX.
I was instructed to try opening yap: that worked.
I was then instructed to compile the attached file from a console: that
worked.
I then checked if miktex was in my path. I see c:\texmf\miktex\bin in
my path.
Anyone have another suggestion?
Kent
Kent Kostuk wrote:
I was instructed to try opening yap: that worked.
I was then instructed to compile the attached file from a console: that
worked.
I then checked if miktex was in my path. I see c:\texmf\miktex\bin in
my path.
Anyone have another suggestion?
OK if that works, assure that
I get the same error if I try to run lyx from the console command (I had
tried this previously and just to make sure, I tried again).
It appears that the subfolders are write enabled for everyone.
Any other suggestions?
Kent
OK if that works, assure that the installation folder of LyX and all
Kent Kostuk wrote:
I get the same error if I try to run lyx from the console command (I had
tried this previously and just to make sure, I tried again).
Could you send us the text of the console window while reconfiguring LyX.
regards Uwe
I am having some difficulties getting LyX 1.3.5 for Win32 to start.
When I attempt to execute lyx.exe I get a dialog box with the following
text:
LyX wasn't able to find any layout description!
Check the contents of the file "textclass.lst"
Sorry, has to exit :-(
A reinstall did not make this
Kent Kostuk wrote:
I am having some difficulties getting LyX 1.3.5 for Win32 to start. When
I attempt to execute lyx.exe I get a dialog box with the following text:
LyX wasn't able to find any layout description!
Check the contents of the file "textclass.lst"
Seems that LyX can't find your
I was instructed to try opening yap: that worked.
I was then instructed to compile the attached file from a console: that
worked.
I then checked if miktex was in my path. I see c:\texmf\miktex\bin in
my path.
Anyone have another suggestion?
Kent
Kent Kostuk wrote:
I was instructed to try opening yap: that worked.
I was then instructed to compile the attached file from a console: that
worked.
I then checked if miktex was in my path. I see c:\texmf\miktex\bin in
my path.
Anyone have another suggestion?
OK if that works, assure that
I get the same error if I try to run lyx from the console command (I had
tried this previously and just to make sure, I tried again).
It appears that the subfolders are write enabled for everyone.
Any other suggestions?
Kent
OK if that works, assure that the installation folder of LyX and all
Kent Kostuk wrote:
I get the same error if I try to run lyx from the console command (I had
tried this previously and just to make sure, I tried again).
Could you send us the text of the console window while reconfiguring LyX.
regards Uwe
36 matches
Mail list logo