Re: ....document-lyxformat-474.lyx

On Monday, July 25, 2016 10:04:21 AM WEST Michael Berger wrote: > Hi, > > I am getting file names of the form shown above after upgrading to LyX > 2.2.0. > > What exactly is the purpose and may I safely remove these? document-lyxformat-474.lyx is the name of the original file, saved with

Re: Lyx-Pdf problem

On Monday, July 25, 2016 10:31:06 AM WEST Dr Eberhard Lisse wrote: > Why are you sending this in a Microsoft format? > > el It was just a way to embed the snapshot of the error. An envelope could have been saved by inserting directly the figure in the email. :-) On Monday, July 25, 2016

Re: Math: non-tex fonts default -> error

On Friday, July 1, 2016 9:13:07 AM WEST Neal Becker wrote: > There it is! > I've tried > sudo mktexlsr --verbose > and also rm -rf ~/.texlive2015 to clean cache. Hi Neal, do you have texlive-lm-math installed? If not this should work: # dnf install texlive-lm-math Regards, -- José

Re: RHEL6 Linux 2.1.4 Compiling Help

On Wednesday, September 21, 2016 5:39:40 PM WEST Ben Lowe wrote: > I'd be grateful with help compiling Lyx on RHEL6 > (2.6.32-573.3.1.el6.x86_64). I compiled Lyx 2.1.4 a while back with > no problem but having issues on 2.2.1. I have attached my configure > log and makefile logs. I am using conda

Re: Update

On Friday, August 26, 2016 4:12:42 PM WEST Patrick Dupre wrote: > Hello, > > In the version 2.2.1 that I installed, the update function does not > work as it use to do!! > I does not update the pdf file that I previously viewed (CTRL R). > I only have the option to kill the viewed version and to

Re: lyx to latex

On Wednesday, 22 March 2017 20.48.17 WET Patrick Dupre wrote: > Thank, But it does not solve my problem: > > I made the correction in the source file and installed it. > In my opinon, there is an issue with lay because. > IN my preference It set: > File Handling -> Converter: > Lyx -> rtf >

Re: Unable to open file........

On Saturday, 8 April 2017 00.14.33 WEST Charlie wrote: > More numbers. > > I attempted several encodings with the text editor but no joy. The > numbers changed a little bit but not a great deal. > > Just a question here. One of the reasons use LyX is because I thought > any LyX file could be

Re: LyX native format stuck in the middle

On Monday, 31 July 2017 18.30.31 WEST Steve Litt wrote: > I know what I'm asking for is monsterously difficult, and I know I > certainly don't have the technical chops to do it. But when it gets > done, LyX will be a brand new world, finally living up to its promise > of write once, deploy

Re: lyx to lyx on the Mac command line

On Tuesday, 8 August 2017 17.24.30 WEST Dr Eberhard Lisse wrote: > José > > thank you, but it lyx2lyx does not do what I need. > > lyx2lyx file.lyx -o file.lyx > > clobbers file.lyx > > Something like > > PID=$$ > cp file.lyx file.$PID.lyx > lyx2lyx file.$PID.lyx

Re: lyx to lyx on the Mac command line

On Wednesday, 9 August 2017 09.56.31 WEST Dr Eberhard Lisse wrote: > Jose, > > thanks, but still no error checking :-)-O > > lyx2lyx is a python script, so I am wondering whether there is not > perhaps a way of doing this inside the script, perhaps with something > like --upgrade-in-place (so

Re: lyx to lyx on the Mac command line

On Tuesday, 8 August 2017 15.50.28 WEST Dr Eberhard Lisse wrote: > Hi, > > is there a way of changing a lyx file from an older version to the > current one on the command line, like opening the file, making a > modification to trigger the saving allowed and saving it under the old > filename? >

Re: LyX-to-LyX pasting from "English" to "English (USA)" annoyances

On Saturday, 20 January 2018 22.39.46 WET Scott Kostyshak wrote: > Does anyone else run into this annoyance, e.g., with other forms of > English, French, German, etc? If not, then I don't think we should > change anything. I do with the different variants of English, sometimes I use the UK

Re: Small poll - download speed of LyX installers

On Friday, 16 February 2018 16.20.53 WET Pavel Sanda wrote: > If you have one minute of spare time could you download this file > ftp://ftp.lyx.org/pub/lyx/devel/lyx-2.3/lyx-2.3.0rc2/LyX-2.3.0rc2+qt5-x86_64 > -cocoa.dmg and report: > > 1. time to download (/ download speed) > 2. country (and/or

Re: Two column Koma script book > end of chapter appearance

On Wednesday, 8 August 2018 10.20.08 WEST Wolfgang Engelmann wrote: > Am 08.08.2018 um 11:07 schrieb Baris Erkus: > > Sent from Mail for > > Windows 10 > > > > *From: *Wolfgang Engelmann > > *Sent: *Wednesday,

Re: 2.3.0 installer test on Windows 10

On Wednesday, 28 February 2018 17.25.43 WET Eric Barkan wrote: > Jose: I personally don't require any Babel packages; this just came up > during testing. So no need to change the spec file, at least not for me. > > Thanks! > > Eric Barkan The underlying issue is what is the adequate set of

Re: LyX & article style?

On Friday, 6 April 2018 13.57.47 WEST Anders Ekberg wrote: > \date{} in the LaTeX Preamble (Document > Settings) Or equivalently there is a check box on Document->Settings- >Document class that says: Suppress default date on front page -- José Abílio

Re: coding of text

On Wednesday, 21 March 2018 19.17.12 WET Wolfgang Engelmann wrote: > Thanks again, Paul, it was us-ascii coded and > iconv -f us-ascii -t utf-8 original-us-ascii.txt > converted- utf8.txt > worked fine. > Wolfgang If the encoding was us-ascii there is no need to to a conversion since ascii is a

Re: 2.3.0 installer test on Windows 10

On Wednesday, 28 February 2018 00.46.49 WET Eric Barkan wrote: > Am I missing some package from Texlive? Probably you are missing the babel packages: You can install them as texlive-babel-spanish (or what is equivalent tex- babel-spanish). Probably we could add the tex-babel* as either a

Re: Bibliographic Slop-Over

On Sunday, 7 October 2018 02.48.38 WEST Daniel Kian Mc Kiernan (the best Daniel of the bunch) wrote: > Odd. We are each running distributions of Linux (Fedora in my case), > so the apps should be virtually identical. What version of Fedora are you using? I am running Fedora 29 (in development)

Re: serious bug (fedora issue?)

On Saturday, 29 December 2018 16.19.06 WET Jean-Marc Lasgouttes wrote: > Le 07/11/2018 à 14:35, Patrick Dupre a écrit : > > Hello, > > > > There is a serious bug with the version 2.3.1 under fedora 28 > > When I run the spellchecker, I got the following crash. > > Is it possible with fedora to

Re: crash when spell checking

On Tuesday, 4 December 2018 07.10.53 WET Patrick Dupre wrote: > Hello, > > I do not understand why lyx crashes when I run the spell checker. > Then it crashes every time that I try to reload it!!! > It is a BEARMER document. > Unfortunately, it is not a document that I can broadcast, and I am in

Re: serious bug

On Tuesday, 25 December 2018 18.12.22 WET Scott Kostyshak wrote: > Thanks for the reply, Patrick. Let us know once you upgrade. > > Scott Patrick has upgraded with no change, the same crashes. :-( -- José Abílio

Re: [ANNOUNCE] LyX 2.3.1 Released

On Sunday, 16 September 2018 16.40.46 WEST Richard Kimberly Heck wrote: > We are proud to announce the release of LyX 2.3.1. This is the first > maintenance release in the 2.3.x series. > > You can download LyX 2.3.1 from http://www.lyx.org/Download/. In order to build to Fedora I tried to

Re: Enumerate in Beamer

On Thursday, 23 May 2019 12.20.41 WEST Dr Eberhard Lisse wrote: > Is there a way of doing this in Beamer? With as little ERT as possible > of course > > el Have you seen https://wiki.lyx.org/LyX/Numbering or https://wiki.lyx.org/Tips/Enumitem They show how to do what you intend. Regards, --

Re: Brazilian Portuguese

On Wednesday, 1 April 2020 08.55.06 WEST Steve Hnizdur wrote: > Hi > > I need to included some Brazilian Portuguese in an English document. > When I do this through standard Lyx methods, Lyx automatically adds the > option "brazil" to the document class in the preamble. Unfortunately > this stops

Re: Brazilian Portuguese

On Wednesday, 1 April 2020 09.21.39 WEST Steve Hnizdur wrote: > Hi > > Attached is a MWE. > > Error is: > > "! Package babel Error: You haven't defined the language brazil yet. > > See the babel package documentation for explanation. > Type H for immediate help. > ... > > l.12

Re: Brazilian Portuguese

On Wednesday, 1 April 2020 11.12.16 WEST Steve Hnizdur wrote: > Hi > > Solved. Needed texlive-lang-portuguese. Thought I had it but apparently not! > > Thanks for your help. That is good to know. In Fedora that is provided in texlive-babel-portuges (the absence of the u in the name is an

Re: Brazilian Portuguese

On Wednesday, 1 April 2020 15.24.08 WEST Jürgen Spitzmüller wrote: > I though it is an 8.3 thing (which is of course in itself a "historical > accident"). Yes, just like the people that I met that still use latex 2.09 features... really... argh... :-) -- José Abílio -- lyx-users mailing

Re: Brazilian Portuguese

On Wednesday, 1 April 2020 15.15.37 WEST Jean-Marc Lasgouttes wrote: > It is to compensate for the expensive double "it" > > JMarc You got it. :-) -- José Abílio -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users

Re: no modules availables

On Friday, 14 August 2020 16.28.22 WEST Jose Ramom Flores das Seixas wrote: > Hi: > > I take a long time without using LyX, but my package manager has been > updating lyx when new versions come out. Nowadays, I have installed version > 2.3.5.2 (OS: Ubuntu 18.04). > > Today I tried to edit a

Re: no modules availables

On Saturday, 15 August 2020 10.55.06 WEST Wolfgang Engelmann wrote: > I am getting a long output with mostly yes, but also no-answers, e.g. > checking for package garamondx [garamondx]... no > +checking for font garamondx-fonts [zgmr8r]... no > or > +checking for document class aapaper [aa]...

Re: no modules availables

On Saturday, 15 August 2020 08.36.32 WEST Wolfgang Engelmann wrote: > I have followed the discussion and proposals on "no modules available" > In my case I get: > > python /usr/share/lyx/configure.py > Traceback (most recent call last): >File "/usr/share/lyx/configure.py", line 23, in >

Re: Fwd: Re: no modules availables

On Saturday, 15 August 2020 15.26.27 WEST Jose Ramom Flores das Seixas wrote: > The problem with Inkscape was that I had installed it as a flatpak package. > I've removed it and installed the deb package and now all seem OK. > > Cheers > > Ramom Yes, that is the problem. :-) The issue is that

Re: Fwd: Re: no modules availables

On Saturday, 15 August 2020 16.44.37 WEST Richard Kimberly Heck wrote: > Do you think that is worth doing? If it can be done easily then why not? :-) Basically that and people asking for it. :-) The configure code has annoyed me for a long time and at the next development cycle I would like to

Re: Fwd: Re: no modules availables

On Saturday, 15 August 2020 15.26.27 WEST Jose Ramom Flores das Seixas wrote: > You got it right, as I had several old modules from Editorium of type: > > Non-ISO extended-ASCII text, with CRLF line terminators > > I have converted them to > > UTF-8 Unicode text > > and now configure.py

Re: Lyx icon?

On Monday, 22 June 2020 14.10.04 WEST Jean-Marc Lasgouttes wrote: > Could it be this bug? > https://www.lyx.org/trac/ticket/11847 > > I posted a bug there, but I am not able to test it. > > JMarc I rebuilt lyx-2.3.5.2 with just this patch applied.

Re: Conversion error for Help files

On Thursday, 4 June 2020 14.52.26 WEST Rudi Gaelzer wrote: > Yep! That's it. > I recently upgraded to Fedora 32, which distributes inkscape 1.0-2. > I'll just wait for LyX 2.3.5 then... Oi Rudi, :-) lyx-2.3.5 is on updates testing:

Re: Conversion error for Help files

On Friday, 5 June 2020 12.45.46 WEST Rudi Gaelzer wrote: > Wow! José, did you just invented time travel? I would be glad to take the credit for that but in this case all the credit goes to Riki. :-D I have studied Cosmology while an undergraduate, De Sitter– Schwarzschild and Kerr metrics, etc.

Re: Can't upgrade LyX on Focal Fossa

On Wednesday, 22 July 2020 19.23.10 WEST Jean-Marc Lasgouttes wrote: > Liviu, I would advise to configure with --enable-qt5 (will be the defalt > in 2.4.0) for recent versions. It almost works with 16.04 (actually it > works but outputs annoying messages on console) and actually works with > later

Re: Fwd: No first line in double enumeration

On Thursday, November 26, 2020 4:37:08 PM WET Richard Kimberly Heck wrote: > OK, I see the problem. Two solutions: > > The simplest is to add an empty ERT box to the first item. This will prevent > LyX from collapsing the empty element and adds nothing to the output. Why not to add a protected

Re: beamer notes support?

On Wednesday, December 2, 2020 5:54:30 PM WET Neal Becker wrote: > Thanks! I see now that there is Insert > Custom inset > Beamer Note, and > there is also Noteitem layout. Seems odd that these two options are in > entirely different menus. Because they correspond to different roles: Custom

Re: Markdown to Lyx

On Monday, December 14, 2020 4:41:11 AM WET Murat Yildizoglu wrote: > Hi José, > I have tried to do it, but, if I understand correctly how this works, I need > to add a new page under Tips. Unfortunately the suggested password LyX does > not seem to be enough for editing the page list. Probably, I

Re: Xubuntu 20.04: Qt Library

On Friday, December 11, 2020 5:32:44 PM WET Richard Kimberly Heck wrote: > I'm a little puzzled why you would need that. LyX uses Qt, yes, but > packages like that typically involve some kind of communication between > Qt and Gtk. I don't know why LyX would need that. I would expect for those

Re: Markdown to Lyx

On Friday, December 11, 2020 8:50:36 AM WET Dr Eberhard W Lisse wrote: > Murat, > > also look for pandoc’s template (-t latex) which you can modify. You really > want Koma-Script instead of the standard (ie scrartcl vs article), and you > also want LuaLaTeX (if you are not using it already. > >

Re: Fwd: no accents with dead keys (SOLVED)

On Wednesday, November 11, 2020 4:11:18 PM WET jorge hernando wrote: > Hi Jose > > I searched old e-mails and I believe I can confirm it's a bug in qt5 that > ts triggered by un unknown mechanism. The previous fedora version I had > (the 29) had lyx 2.3.3 and qt5.11 and it worked perfectly. When

Re: no accents with dead keys (SOLVED)

On Tuesday, November 10, 2020 7:03:42 PM WET jorge hernando wrote: > Hi > Some time ago I begun a thread about dead keys not working in lyx that ended > up with a quite cumbersome and imperfect solution (it didn't work in > formulas and was an unmitigated problem in tables); i.e. to write in a non

Re: no accents with dead keys (SOLVED)

Hi Jorge, let us keep this discussion in the mailing list to help others that could have the same problem. :-) On Wednesday, November 11, 2020 1:20:37 PM WET jorge hernando wrote: > I use mate as a desktop. I use mainly kde, sometimes test in gnome, and although I have not mate installed but

Re: LyX shortcuts

On Saturday, November 7, 2020 9:25:33 AM WET Wolfgang Engelmann wrote: > Joel, > what I am after, described with two examples: > 1. > Insert > Cross Reference > this used to show - as far as I remember- in the old golden times - > ctr r at the right. In my present LyX there is none (LyX Version

Re: | >>

On Monday, November 9, 2020 5:15:06 PM WET Patrick Dupre wrote: > Hello, > > How can I generate the following sequence with lyx? > $\left|A\right\rangle\rangle $ > > Thank. If I understand you correctly one way would be to copy that sequence text to lyx, select it and press Ctr+M (if you use

Re: | >>

On Monday, November 9, 2020 6:07:58 PM WET Patrick Dupre wrote: > Thank for the feedback, > > This I understand. The problem is that I have to type all my formula under > latex then. This is annoying for large formulas. > > I would like to by able to keep using the lyx tool. In Math manual:

Re: Preset LaTeX parameters/arguments

On Tuesday, November 3, 2020 12:09:26 PM WET Daniel wrote: > As my self answer indicates, it was actually a LyX specific question, I > think. > > Daniel Hi Daniel, I think that developers mailing list would have been a better target for this question. In any case you answered it yourself. :-)

Re: LyX acting differently between computers

On Friday, October 30, 2020 6:55:57 PM WET Eberhard W Lisse wrote: > And I am not criticizing one bit the efforts of the LyX trying to make this > work on Windows. > > el I did *not* read it that way either. :-) -- José Abílio-- lyx-users mailing list lyx-users@lists.lyx.org

Re: Testing Release of 2.4.0 Development Branch

On Thursday, October 29, 2020 10:09:24 PM WET Richard Kimberly Heck wrote: > Both source code and binaries for Windows and OSX can be found here: > > http://ftp.lyx.org/ftp/pub/lyx/devel/lyx-2.4/ > > Binaries for various Linux distros may or may not be available from > their associated

Re: LyX on Apple Silicon (cont.)

On Saturday, January 16, 2021 6:56:33 PM WET Richard Kimberly Heck wrote: > I honestly don't even know what Apple Silicon is That refers to the new ARM processors architecture from Apple as opposed to the previous processors that are Intel based. -- José Abílio-- lyx-users mailing list

Re: LyX 2.4.0 Alpha 1

On Saturday, January 16, 2021 1:49:23 PM WET Baris Erkus wrote: > One thing I observed, maybe nothing big, the screen fonts are quite large > compared to 2.3.x, even if the screen fonts zoom ratio is %225 in both > versions. See attached (above is 2.4, below is 2.3). Are both versions using the

Re: Flawed 2.3.6.1 upgrade

On Monday, January 25, 2021 7:04:48 PM WET Rich Shepard wrote: > GuiApplication.cpp (3126): Unable to read UI file: > /home/rshepard/.lyx/ui/classic.ui Hi Rich, do you still have the original file that gave you problems? If so could you sent it to me privately to find why this is failing with

Re: Koma-script Book Figure/Table numbering.

On Thursday, February 4, 2021 2:51:44 PM WET Norman Dunbar wrote: > Hi Rich, > > thanks for the advice. Please find the test case attached. Hopefully. > > LyxTableBug is the master, childDocument is, well, the child document. > > > Cheers, > Norm. It seems that this is on purpose due to using

Re: Set optional tabular argument

On Monday, May 17, 2021 7:20:40 AM WEST Daniel wrote: > Perfect, thanks. I missed that. I guess because "Table-wide settings" > sounds as if some setting that is normally applied only per > column/row/cell is applied table-wide. So, I had mistaken it for the > text-alignment within the table. I am

Re: beamer dual

On Wednesday, March 3, 2021 11:16:38 AM WET Patrick Dupre wrote: > Hello, > > I am preparing a short presentation for a colleague. I would like to have > the regular slides on the standard screen, and on an auxiliary screen, the > notes/text that he could use. Or at least to have the "notes"

Re: Installed module not found; page style not accepted

On Thursday, 26 August 2021 17.47.09 WEST Rich Shepard wrote: > A) Probably because that's where texlive-2020.200608-x86_64-2_SBo or > texlive-extra-2020.200608-x86_64-1_SBo put it, and Just for future reference scrpage2 is present in texlive-2020 and has been removed from texlive-2021. For

Re: lyx not a readable Lyx document

On Saturday, 9 April 2022 18.15.31 WEST Wolfgang Engelmann via lyx-users wrote: > > however, after it and after > > ./configure --with-version-suffix=lyx24n > (I unfortunately forgot --bindir=/usr/local/bin) > make > make install > > and running a lyx file I get again: > > Warning:

Re: Conversion failure for older format

On Tuesday, 21 June 2022 13.44.01 WEST Rudi Gaelzer wrote: > Hits a snag right at the beginning: > > rudi@stix|Plasma Modes>python2 /usr/share/lyx/lyx2lyx/lyx2lyx Langmuir- > lyxformat-508.lyx > /dev/null > File "/usr/lib64/python3.10/site.py", line 93 > print(message, file=sys.stderr) >

Re: Support for xfig graphics

On Tuesday, 21 June 2022 14.12.14 WEST Rudi Gaelzer wrote: > It seems that the support for xfig figures is not working on my system. See > the attached files. > The Xfig file sets the TeX flag for text. I think that this could be a manifestation of the problem that you have. LyX is choosing

Re: Conversion failure for older format

On Tuesday, 21 June 2022 17.06.00 WEST Jean-Marc Lasgouttes wrote: > Are you sure that you do not have another file names "lyx2lyx" > somewhere? "locate" may be able to determine that. > > JMarc It is unlikely because lyx always knows the relative location of lyx2lyx. So even if there are two

Re: Support for xfig graphics

On Wednesday, 22 June 2022 03.54.53 WEST Steve Litt wrote: > That can't be right. Python 2 has been deprecated for years. I'm sure > LyX gives you the choice to use Python 3. What I mean here is that LyX can still use python 2 as the python version. In the autodetection stage, in lyx 2.3, it can

Re: Conversion failure for older format

On Wednesday, 15 June 2022 18.19.22 WEST Rudi Gaelzer wrote: > I'm trying to open a LyX file with an older format: > \lyxformat 508 > > But I got the error message: LyX: Conversion script failed > It says that the lyx2lyx script failed to convert the document. > > What should I do in this case?

Re: beamer

On Thursday, 16 June 2022 17.32.06 WEST Daniel wrote: > Apparently one can even hack the navigation icons away on a specific > frame if that is desired. See attachment. Inspired by > https://tex.stackexchange.com/questions/14796/beamer-blank-black-frame. > > Daniel That is also one of the

Re: The programming language of lyx class files

On Friday, 17 June 2022 01.22.48 WEST tush via lyx-users wrote: > Github markdown allows the writer to type code snippets with syntax > highlighting. > > I want to write in such a markdown document a code snippet of a class file: > module file or layout file. > > What is the most appropriate

Re: Conversion failure for older format

On Monday, 20 June 2022 14.28.18 WEST Rudi Gaelzer wrote: > That worked. First, I copied the original .lyx to > -lyxformat-508.lyx, then ran > $>/usr/share/lyx/lyx2lyx/lyx2lyx -lyxformat-508.lyx -o .lyx > > That successfully converted the original to format 544, which the frontend > was able to

Re: Exercises at end of sections

On Wednesday, 1 June 2022 05.38.06 WEST Richard Kimberly Heck wrote: > > There probably is some pre-existing package you could adapt. But this > would be relatively easy to do from scratch. My first thought would be > as in the attached file. Is there something you need that isn't here? > > Riki

Re: lyx_tmpdirs in /tmp

On Wednesday, 5 January 2022 13.29.07 WET Wolfgang Engelmann via lyx-users wrote: > Can I delete the lyx_tmpdirs in the root /tmp? > I have the impression, that a rerun of lyx uses it, which I do not want. Every time that LyX runs it generates a temporary directory/folder, called lyx_tmpdir.

Re: pdf (lua) of a lyx document

On Wednesday, 2 February 2022 08.48.18 WET Wolfgang Engelmann via lyx-users wrote: > I use lyx 2.4.0dev (Debian) > starting lyx from a terminal, selecting a certain document and trying to > view it by export pdflua > leads to this in the terminal > >

Re: lyx_tmpdirs in /tmp

On Thursday, 6 January 2022 14.28.53 WET Wolfgang Engelmann via lyx-users wrote: > This is what I get after > mount | grep tmp: > > udev on /dev type devtmpfs > (rw,nosuid,relatime,size=1909652k,nr_inodes=477413,mode=755) > tmpfs on /run type tmpfs >

Re: lyx_tmpdirs in /tmp

On Thursday, 6 January 2022 06.29.18 WET Wolfgang Engelmann via lyx-users wrote: > My problem is, that I can't run the luatex document properly. I might > report about it if I can't manage myself. What do you get when you run: mount | grep tmp in my case (Fedora 35) I see: ... tmpfs on /tmp