Re: [NTG-context] lmtx

Dear Otared, > I updated the wiki page for installing LuaMetaTeX on MacOS: > > https://wiki.contextgarden.net/installing_luametatex Thank you for the wiki. It explains the complicate processes well. As I wrote in the last mail, I don’t have a problem of installation as before. At this

Re: [NTG-context] lmtx

Dear Hans, I downloaded the new beta today. It installs files and makes format file well. I compiled a test file without any problem. Of course, there is a security issue of OSX, but allowing the execution in the preference>security once, it doesn't ask about again. I also run a test file

Re: [NTG-context] problem with a new installation of LMTX

gt; for you: you can try to install it on your Mac running MacOS 10.15 Catalina. > Could you please tell me if you succeed to implement the procedure I > described in the other email? > > Best regards: OK > >> On 8 Dec 2019, at 13:31, Jeong Dal wrote: >> >> For t

Re: [NTG-context] problem with a new installation of LMTX

Dear Hans, Alan, and Mojca, Thank you for your concern. For me, it is a difficult problem, so I may return to the previous version of OSX. > I have no problem on Catalina, however wiping-out the cache and rebuilding > the format often gives me errors finding the lua scripts (so I have taken

Re: [NTG-context] problem with a new installation of LMTX

For test, I installed again after removing ConTeXtLMTX folder. But it is same as before. I looked files in “/tex/texmf-osx-64/bin”. There are 5 files: context, context.lua, luametatex, mtxrun, mtxrun.lua. context and mtxrun are symbolic linked to luametatex. But luametatex is not executable, so

Re: [NTG-context] problem with a new installation of LMTX

Dear Hans and Otared, Thank you again for your attempt to find a solution. Catalina(MacOS 10.15.1) prohibits an unauthorized program run. So I have to allow the execution of “mtxrun” manually in the preference. Since "mtxrun —generate” ends with the message “unknown script mtxrun-context.lua

Re: [NTG-context] problem with a new installation of LMTX

Dear Hans, Otared, Thank you for your concern. The version of luametatex is 20191206. I followed what Otared said, but texmf-cache is not created after mtxrun. "context —make" is running, but no format. I checked folders after the installation. Folders, texmf-cache, texmf-fonts, texmf-local,

[NTG-context] problem with a new installation of LMTX

I read some reports about the problems of a new installation of LMTX. Today, I did fresh install and also have a problem in compilation. I did the following: 0. Open the terminal 1. Remove all files in the folder “ConTeXtLMTX” 2. Download install files from PRAGMA ADE. 3. run “install.sh”(at

Re: [NTG-context] Transparency (Metapost)

> \ Dear Fabrice, I got color and transparency using the following command in LMTX(metafun). fill p withcolor yellow withtransparency(1, .75); I hope that it helps. Best regards, Dalyoung___ If your question is

Re: [NTG-context] new (lmtx) beta

Dear Hans, >> Though it calculates function using “x^2 + y^2”, it is better to write the >> name of it as the output of $x^2 + y^2$. >> Is it possible to write it as in mathematical form? > >functionstyle = "math”, > It works nicely. >> Is there any reason to use two different

Re: [NTG-context] new (lmtx) beta

Dear Hans, I read the manual of luametafun and do some examples. Thanks for many new features. It is really great. I’d like to ask two things. 1. On page 26,27, in the manual, > > http://www.pragma-ade.com/general/manuals/luametafun.pdf >

Re: [NTG-context] MetaPost with Multiple Variable Sections

Dear Jeroen, If you change “pair a;” to “numeric a;” in the second MPcode, it draws a circle without error. Best regards, Dalyoung > > \placefloatright{}{ > \startMPcode > pair a; numeric a; > a := 2cm; > draw fullcircle scaled (2*a); > \stopMPcode} > > \stoptext >

Re: [NTG-context] :Re: How to use ConTeXt extensions with VS Code

. Thank you again. Best regards, Dalyoung > 2019. 9. 3. 오후 9:43, Jeong Dal 작성: > > Dear Hans, > > I tried to install your vscode extension for context using the command : > > code --extensions-dir > /Users/graph/ConTeXtLMTX/tex/texmf-context/context/data/vscode/extension

[NTG-context] :Re: How to use ConTeXt extensions with VS Code

Dear Hans, I tried to install your vscode extension for context using the command : code --extensions-dir /Users/graph/ConTeXtLMTX/tex/texmf-context/context/data/vscode/extensions --install-extension context Then I got a following error message: Installing extensions... Extension 'context'

Re: [NTG-context] ntg-context Digest, Vol 183, Issue 4

Dear Hans, By adding “setuptex” in the task file, it runs well and makes a pdf output. { "label": "ConTeXt Compile", "type": "shell", "command": "source ~/ConTeXtLMTX/tex/setuptex;context '${file}'", "args": [], "group": {

Re: [NTG-context] How to use ConTeXt extensions with VS Code

Dear Hans, >> But I cannot see any syntax coloring and don’t know how to compile a TeX >> file. >> Would you please help me more? > I think you also need to choose the context color scheme > Yes, syntax coloring works after choosing the context color scheme. I find a following task file to

Re: [NTG-context] How to use ConTeXt extensions with VS Code

Dear Hans, Thank you for a quick reply. > > tex/texmf-context/context/data/vscode > I copied all the file …/vscode/extensions/context to ~/.vscode/extexsions/ When I open vacode, there is “ConTeXt 1.0.0, ConTeXt Syntax Highlignting…” in the extensions tab. It is installed and enabled. But I

Re: [NTG-context] How to use ConTeXt extensions with VS Code

Dear Hans, > 2019. 8. 19. 오후 4:21, ntg-context-requ...@ntg.nl 작성: > > there is an vscode-context.cmd file > Where can I find a vscode-context.cmd file? I couldn’t locate it using google search. > this could also work: > >> mtxrun --script vscode --start > Thank you. Best regards,

Re: [NTG-context] balanced vertical spaces under \startcolumnset

Dear Sytse, Thank you for your suggestion. > > Maybe paragraphs work for you? > (https://wiki.contextgarden.net/Columns) I will check it. BTW, Use “\column” and don’t print a blank page is the simplest way. Thank you again. Best regards, Dalyoung

Re: [NTG-context] balanced vertical spaces under \startcolumnset

Dear Sytse Knypstra, Thank you for your reply. I read the manual “Columns” as you suggested. The command \setupcolumnsetstart made a balanced output. But my problem is little different from it. I want exam paper of two columns in a page and in each column two problems located with the same

[NTG-context] balanced vertical spaces under \startcolumnset

Dear all, I use the following code to make test. To make the same height blank spaces after the problems, I use \vfill before \column. The problem is that the second \column creates extra blank page. But, without the second \column, the height of blank spaces of the second column are different.

[NTG-context] align figures verticaly centered in \startcombination mode

Dear all, In the following example, “align=middle” works for horizontal center. Is there any way to align two figures with different height in vertically centered? Thank you. Best regards, Dalyoung \useMPlibrary[dum] \setupinteraction[state=start] \usemodule[pre-60]

Re: [NTG-context] about \startMPanimation

and thanks Wolfgang! Best regards, Dalyoung > 2019. 5. 13. 오후 10:04, Hans Hagen 작성: > > On 5/13/2019 2:14 PM, Jeong Dal wrote: >> Dear Wolfgang, >> I found the following code with a comment “code by Wolfgang” at >> https://adityam.github.io/context-blog/post/metapos

[NTG-context] about \startMPanimation

Dear Wolfgang, I found the following code with a comment “code by Wolfgang” at https://adityam.github.io/context-blog/post/metapost-animation/ \unprotect \installnamespace{MPanimationvariables} \unexpanded\def\startMPanimation

Re: [NTG-context] follow up

Dear Otared, I checked the both cases in the terminal and found that there is no problem in the installation. It call “mtxrun" in right place depending on MKIV or LMTX. Actually, files which doesn’t need files in texmf-local folder are compiled well in both installations. The problem is

Re: [NTG-context] follow up

200 > From: Hans Hagen > To: mailing list for ConTeXt users > Subject: Re: [NTG-context] follow up > Message-ID: <8f908232-5516-b2a7-df76-51eba0c51...@xs4all.nl> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 4/5/2019 12:17 AM, Jeong Dal wrote: >> De

Re: [NTG-context] follow up

Dear Hans, I have installed both ConTeXt LMTX and ConTeXt MKIV side by side. But I have a problem to run it. If it is OK to run a file in LMTX environment, then I got a following error when I run it in MKIV environment. “I can’t fine a file …../defFonts.tex” even though it is there. To

Re: [NTG-context] follow up

Dear Hans and Alan, First, thanks for your wonderful work! I followed your instruction to install ConTeXt LMTX. For the record, I wrote what I did. Any comment is welcome to improve my installation. - create directory: ConTeXtLMTX - download install files. - run “sudo sh ./install.sh” - after

Re: [NTG-context] about the color of sidebar

Dear Mohammad Hossein Bateni, > 2019. 2. 25. 오후 1:27, ntg-context-requ...@ntg.nl 작성: > > I have never used the sidebar mechanism, but there is a "rulecolor" option > in setupsidebar. Maybe that's what you're looking for. > > You can look up the commands and their options in "i-context.pdf"

[NTG-context] about the color of sidebar

Dear Hans, > 2019. 2. 24. 오후 7:17, ntg-context-requ...@ntg.nl 작성: > > On 2/24/2019 12:25 AM, mf wrote: >> BTW \startsidebar ... \stopsidebar stopped working too. > i'll upload a fix later today > > Hans It is good to know the commnad "\startsidebar … \stopsidebar” because I used the same

Re: [NTG-context] When newsizing an external figure by [width=], what will be its height in pt and viceversa?

Dear Rudolf, > 2019. 2. 24. 오후 7:17, ntg-context-requ...@ntg.nl 작성: > > If you convert your sp-sizes into pt-sizes (1pt = 65536sp) you will get: > (45126287sp,31048991sp) = (688.5725pt,473.7700pt) > > What do you think, are these pt-values ok to you? In my opinion they seem to > be too >

Re: [NTG-context] When newsizing an external figure bei [width=], what will be its height in pt and viceversa?

Dear Rudolf, It is working for me. Using my figure, I got (45126287sp,31048991sp) (1372,944) As Hans said, either change ~ to some path or set the directory of externalfigure. Best regards, Dalyoung > 2019. 2. 24. 오전 5:58, ntg-context-requ...@ntg.nl 작성: > > I fear it doesn't work. I

Re: [NTG-context] baseline of outlined font

Dear Wolfgang, Thank you for the solution. BTW, what is the difference between “deeptextcommand” and “textcommand”? Best regards, Dalyoung ___ If your question is of interest to others as well, please add an entry

[NTG-context] baseline of outlined font

Dear all, Recently, I used outlined font described in MetaFun for titles. But the baselines of the number and the title of chapter are different. What is wrong in the following code? Thank you for reading. Best regards, Dalyoung \definefont[BigFontOne][NotoSansCJKkr-Bold sa 4]

Re: [NTG-context] index problem: [entry not flushed]

Dear Wolfgang, >> I couldn’t figure out what relation is there between Theorems and Exam. > The numbers are correct with the latest beta. > > mtx-context | current version: 2019.02.10 17:43 > You are right. The example which I sent last time had no problem in numbers. I checked it by

Re: [NTG-context] index problem: [entry not flushed]

Dear all, Since the customized Theorem structure is already complicate, I just extract \index from the title as following: \startTheorem{\bf title of theorem} \index{title of theorem} bla bla bla \stopTheorem In this way, I cleared the message "[entry not flushed]” in the indices. There may be

[NTG-context] index problem: [entry not flushed]

Dear all, I just found that the counter problem has no relation with theorems. It happened without theorems while some examples worked correctly. There may be another problem in my definitions in environment file. I’ll do more tests. Thank you for reading. Best regards, Dalyoung

[NTG-context] index problem: [entry not flushed]

Dear all, I used a customized Theorem structure which is made by the help of experts in this list. I have two questions. 1. Recently I added titles of theorems which was indexed and found a strange error message "[entry not flushed]” in the list of index. Please run the following sample

Re: [NTG-context] about vertical alignment

Dear Wolfgang, > \startitemize[n][stopper=),width=0pt] > > You have to set the width for the item symbol to 0pt because it’s now part of > the table. It works perfectly. A short argument "width=0pt” solves my problem. Thank you so much. Best regards,

[NTG-context] about vertical alignment

Dear all, I used \itemtag in \starttabulate to make columns in itemization for some reasons. Actually, it works fine. For more detailed alignment, I’d like to ask about the fine tuning of vertical alignment. Here is an MWS. %%% \showframe \starttext \startitemize[n] \item Prove the

[NTG-context] outlined font using MetaFun

Dear all, The following code which is borrowed from MetaFun manual is working nicely. %% \setupMPvariables[outlineT][tt="Hello"] \startuseMPgraphic{outlineT} draw outlinetext.b (\MPvar{tt}) (withcolor .5white) (withcolor .625blue withpen pencircle scaled .2pt) scaled 3 ;

Re: [NTG-context] About the macro path intersectionpoint path with Metapost

Dear Fabrice, Metapost is great for drawiang figures but it is not easy for me to use it. > b:= fullcircle scaled 2cm shifted (0,-3cm); > pair A, B ; > A:= p intersectionpoint r ; > B:= p intersectionpoint r ; > path u ; > u:= A--B--cycle ; A and B are the same point. One of “r” should

[NTG-context] about the location of subscript of integral sign

Hi, Four days ago, I updated the standalone ConTeXt and found a strange behavior in the integral sign. The number at the bottom is far from the integral sign while the number at the top is OK. I don’t know when it began since I didn’t use \int for a few month. Here is a small sample. In the

Re: [NTG-context] MetaFun: how to check the number of arguments

Dear Hans, > vardef textlength(text t) = >save n ; n := 0 ; >for i = t : > n := n + 1 ; >endfor; >n > enddef; > Thank you for a good method! It can be used in another program. Best regards, Dalyoung

Re: [NTG-context] MetaFun: how to check the number of arguments

작성: > > On 1/14/2019 10:44 PM, Jeong Dal wrote: >> Dear all, >> In the following sample, it draws squares with label which is given. >> I’d like to know how to check the number of elements in the second argument? >> If it is 0, then I just draw grids only. >>

[NTG-context] MetaFun: how to check the number of arguments

Dear all, In the following sample, it draws squares with label which is given. I’d like to know how to check the number of elements in the second argument? If it is 0, then I just draw grids only. Thank you for reading. Best regards, Dalyoung \startbuffer[defs] def drawGridF (expr

Re: [NTG-context] two different outputs.

%\startbackmatter %\stopbackmatter \stopproduct > 2019. 1. 2. 오전 5:13, Wolfgang Schuster 작성: > > Jeong Dal schrieb am 01.01.19 um 01:33: >> Dear all, >> First, Happy new year! >> I tried to make a style of title as following. The first code creates the >> title

[NTG-context] two different outputs.

Dear all, First, Happy new year! I tried to make a style of title as following. The first code creates the title as I wanted, but the second which uses “\title” creates the title strange. they are almost same code. To include it in the list of contents, I use “\title”. Is there a way to make

Re: [NTG-context] How to adjust the sistance between a letter and subscript

Dear Huseyin, Thank you. It works well. And, I didn’t see any side effect either. Thanks again. Best regards, Dalyoung ___ If your question is of interest to others as well, please add an entry to the Wiki!

[NTG-context] How to adjust the sistance between a letter and subscript

Hi, In the following example, the distance between a letter ${\cal T}$ and its subscript is too big. It is not an error, but it looks a little bit strange. How to reduce it for a good looking? Thank you. Best regards, Dalyoung * \starttext Compare the distance between a letter and its

Re: [NTG-context] ntg-context Digest, Vol 172, Issue 2

Dear Aditya, Thank you for the reply. > > As I said, I fixed the post. I see why I have no problem. Thank you for sharing your nice samples. Best regards, Dalyoung___ If your question is of interest to others as

Re: [NTG-context] xtables with lua

Dear Otared, What do you mean “does not typeset correctly as expected”? I copied and tested the last example and got the result without error. One problem is that the vertical alignment is not centered as the example of Aditya’s. Would you please tell me what I miss? Thank you. Best regards,

Re: [NTG-context] Metafun: Finding intersection between characters

Dear Hans, Thank you so much for a new code which works fine. It can be used for the title of chapters. I will play with this to make a nice title. Thank you again. Best regards, Dalyoung > 2018. 9. 28. 오전 12:43, Hans Hagen 작성: > > On 9/27/2018 5:06 PM, Jeong Dal wrote: >

Re: [NTG-context] Metafun: Finding intersection between characters

English letters. In one glyph, there are several parts, which makes the job difficult. Thank you so much. Best regards, Dalyoung > 2018. 9. 27. 오후 5:49, Hans Hagen 작성: > > On 9/26/2018 11:38 PM, Jeong Dal wrote: >> Dear Hans, >>> 2018. 9. 26. 오후 9:24, Hans Hagen >

Re: [NTG-context] Metafun: Finding intersection between characters

Dear Hans,2018. 9. 26. 오후 9:24, Hans Hagen <j.ha...@xs4all.nl> 작성:On 9/26/2018 2:14 PM, Jeong Dal wrote:Dear Hans,I tested for more characters and found an interesting fact.If the first consonant and the vowels are connected in a glyph, then the outlining works OK, otherwise, it makes o

Re: [NTG-context] Metafun: Finding intersection between characters

eanOutline("\KoreanFont 논") ; \stopMPpage \startMPpage KoreanOutline("\KoreanFont 왕") ; \stopMPpage \startMPpage KoreanOutline("\KoreanFont 닭") ; \stopMPpage \startMPpage KoreanOutline("\KoreanFont 박") ; \stopMPpage \startMPpage KoreanOutline("\K

Re: [NTG-context] Metafun: Finding intersection between characters

Dear Hans, I have tested using your code. I just replace “N”, “T” with Korean letters. Here is an MWE which is a simplified version of your code. I tested using two fonts, and the outputs are different. Thank you for your concern. Best regards, Dalyoung %%%

Re: [NTG-context] Metafun: Finding intersection between characters

Dear Hans, First, it is great to know a new method of drawing an outlined font! I have applied it to Korean fonts. As you know, every Korean character is composed with “consonant+vowel(+consonant)” type. If consonant and vowel are connected (for example, “호”), then it draws correctly,

Re: [NTG-context] labeling in meta post

Dear Henri Menke, I always use “btex etex” for labeling math. But “…..” is simpler and it works fine. Thank you. Best regards, Dalyoung >> >> \startbuffer[delta] >> label.bot(btex ${\delta}$ etex, (1cm,0));% >> %label.bot(btex $\delta$ etex, (3cm,0)); > > Why not just > >

[NTG-context] labeling in meta post

Hi, What is the difference between {\delta} and \delta? Former is OK, but the second is not compiled. Here is a MWE. \startbuffer[delta] label.bot(btex ${\delta}$ etex, (1cm,0)); % %label.bot(btex $\delta$ etex, (3cm,0)); label.bot(btex $\frac{2-\delta}{2}$ etex, (5cm,0)); %

Re: [NTG-context] Strange vertical result with itemize in columns

Dear Mikael, I have had the similar experience. Hans suggested another command “\NI” and “\itemtag” for this case. Please check the following mail and wiki. https://mailman.ntg.nl/pipermail/ntg-context/2017/089872.html

[NTG-context] split long formula in two pages

Dear all, Sometime ago, I asked about the splitting the long formula. Since it is seldom to have a long formula, I manually break the formula using \startformula\startalign … formula \stopalign\stopformula \startformula\startalign … formula

Re: [NTG-context] closesymbol on same line as displayed formula

Dear Aditya, Thank you for the reply. >> \startproof >> \startitemize[n] >> \item first line. >> \item second line > > Add: \placeclosesymbol here > >> \stopitemize >> \stopproof >> >> \stoptext > It works in many cases that item content ends with words. But it is not working if the item

[NTG-context] split long formula in two pages

Dear all, Sometimes, I wrote a long formula using \startformula\startalign … \stopalign\stopformula. In that case, if the remaining space in the current page is not enough to contain the formula, then it adds ‘page break’ and write the whole formula int the new page. I have read a discussion

Re: [NTG-context] closesymbol on same line as displayed formula

Hi, I am sorry to bring up old topic “Re: closesymbol on same line as displayed formula” again. (ntg-context Digest, Vol 153, Issue 40) Is there any progress after that? It seems to me that there is no more discussions about it. The same thing happens after the itemization as in the following

Re: [NTG-context] unwanted page break in contents

Dear Wolfgang, > > \setuplist > [section] > [width=10mm, > style=, > textstyle=\ss, > after={\blank[preference]}] It works perfectly. Thank you so much. Best regards, Dalyoung ___ If your question is of

[NTG-context] unwanted page break in contents

Hi, In the table of contents, there is a unwanted blank space after chapter 2. There is a page break if the remaining space is not enough to cover the list of the next chapter. For example, page break after ch 2. in the following example. Is it possible to list them continuously? Best regards,

Re: [NTG-context] How to do an inline itemization?

Dear Wolfgang, > > \starttext > \startitemize[n,packed][stopper=)]% [stopper=,right=)] > \item This is a test for the referencing the formula like\par > \item This is a test for the referencing the formula like\par > \item This is a test for the referencing the formula like. > \stopitemize >

Re: [NTG-context] How to do an inline itemization?

Dear Hans, Thank you for the solution. It works perfectly. Have a nice weekend. Best regards, Dalyoung % \setupinteraction[state=start] \starttext \startitemize[n,text][stopper=,lefttext=,] \item This is a test for the referencing the formula like\par \item This is a test for the

Re: [NTG-context] How to do an inline itemization?

Dear Thomas, Using your example, > \starttext > > \startitemize[n,text] > \startitem > One > \stopitem > \startitem > Two > \stopitem > \stopitemize > > \stoptext > I tested the following example and it is working well. % \starttext \startitemize[n,text] \item This is the first

Re: [NTG-context] referencing the equation

2 x + b_2 y \NC = c_2 \NR[eq:2] > \stopalign \stopformula > > As seen from (\in[eq:1]) and (\in[eq:2]), referring equations is straight > forward. > > \stoptext > %% > > Wolfgang > > > > Jeong Dal schrieb am 09.08.18 um 17:12: >> Dear, >&g

[NTG-context] referencing the equation

Dear, The examples in mathalign.pdf(p4 - ) tells us the method of referencing the equation. The numbers for the equation is written as (1.1), and in the text, it is written as (1.1). That is the numbers are always surrounded by ( , ). In the output of the following code, the equations are

Re: [NTG-context] unable to define 'texgyrepagella-regula' error etc.

Dear Hans, > > > (1) wipe the cache > (2) mtxrun —script --reload -force > Do you mean “wipe cache” as delete “luatex-cache/context/5fe67…f32e/fonts” folder? I open the terminal and run “mtxrun —script — reload -force”, then I got mtxrun | ConTeXt TDS Runner Tool 1.32 mtxrun

Re: [NTG-context] about the defining itemized columns.

Dear Hans, Thanks for the solution. It works perfectly. Best regards, Dalyoung >> define[1]\iCol > {\starttabulate[|*{#1}{|lw(\dimexpr.84\makeupwidth/#1\relax)|}]} > ___ If your question is of interest to others

[NTG-context] about the defining itemized columns.

Dear all, In mathematics, there are many occasions to make exercise problems in columns, and I did that using “tabulate” as following.Thanks Hans for this method! %%% \define\iTwo{\starttabulate[||w(.42\makeupwidth)||lw(.42\makeupwidth)|]}

[NTG-context] unable to define 'texgyrepagella-regula' error etc.

Dear all,Yesterday, I asked about a font problem without a mwe.Here is a MWE.%\setuplanguage[kr][patterns=us]\mainlanguage[kr]\setscript[hangul]\usetypescriptfile[type-hcrlvt]\usetypescript[HcrFont] 

[NTG-context] unable to define 'texgyrepagella-regula' error etc.

Dear all, I found some warning message in the log file which concerns about the font. I didn’t see this kind of error before. (I might missed this error.) However, it produced an output. fonts > defining > font with asked name 'texgyreheros-regular' is not found using lookup 'file'

Re: [NTG-context] metafun: error when I call the same function twice consecutively.

Dear Alan, Thank you for the clear explanation about z. I tought that z is a special variable different from other pairs. Now, I know that it is an equation. Thank you again. Best regards, Dalyoung > 2018. 6. 1. 오후 11:24, Alan Braslau 작성: > > On Fri, 01 Jun 2018 20:29:41 +0900 &g

Re: [NTG-context] metafun: error when I call the same function twice consecutively.

Dear Henri Menke, Thank you for the solution. After inserting a line “save x, y;”, it works. Thank you so much. Best regards, Dalyoung ___ If your question is of interest to others as well, please add an entry to

[NTG-context] metafun: error when I call the same function twice consecutively.

Hi, I defined a function using MetaFun, and call it to draw a figure. It is OK when I call it once. But there is an error when it runs the same function second time. (it stops when it call fap(3,2) after fap(2,2)) I have no idea what is wrong and how to fix it. Would you please tell me what I

[NTG-context] blank line at the beginning of the theorem or proof

Dear all, placing a figure at the right or left of the text using \placefigure[right][]{}{} insert at the begining of the paragraph under the enumerations while there is no blank line if we comment out \placefigure. See the below sample. Is there a way to make text begin from the same line of

[NTG-context] \startplacetable in \startcolumnset

Hi, I found \definecolumnset in the wiki not in the setup-en.pdf. I’ll test it again. Thank you for reading. Best regards, Dalyoung ___ If your question is of interest to others as well, please add an entry to the

[NTG-context] \startplacetable in \startcolumnset

Hi, I used the following exam format well which was set by the help of Wolfgang long time ago. Recently I got a strange output when I used \startplacetable or \placetable in the \startcolumnset … \stopcolumnset. There is a strange number first and table in the next column. The output is OK if

Re: [NTG-context] Typefile with Chinese, Korean or Japanase text

Dear Wolfgang, I found that the previous run “mtxrun - script font…” cheked the fonts for TeXLive 2017. So I run “setuptex” for ConTeXt standalone and run “mtxrun” again. After that I compiled the same file. The result is that \tt works as Nanum Gothic Coding but \ss still not working. “Nanum

Re: [NTG-context] Typefile with Chinese, Korean or Japanase text

Dear Wolfgang, Two months ago, you suggested an example for typefile with korean. I just read it at that time and I try your sample today. Although there are Nanum Gothic and Nanum Gothic Coding in my system font, no output of korean for \ss and \tt. I run ‘mtxrun —script font —reload —force

Re: [NTG-context] about makempy (metapost outlines)

Dear Otared, I am sorry that the sample code is not fully loaded. Although Hans said that we don’t need ‘makempy’, I copied the whole code again for the sake of test. \setuphead[section][style={\effect[outer]}] is working well. For korean, use \setupbodyfont[unfonts] as Hans said. Thank you.

[NTG-context] about makempy (metapost outlines)

Hi, During the search Euler font, I found a manual “creating metapost outlines”. It is what I looking for at the last year. I tried an example for section head, but it issued an undefined control sequence message. Please tell me what is wrong and how to change. I copied the sample code and

Re: [NTG-context] xits-math font problem

Dear Hans, Since I couldn’t use xits for math font, I tried to use euler. I found some mails about the euler font in the list, and change the type-imp-unfonts slightly. I replaced the lines containing xits with euler font. \loadtypescriptfile[euler] %\loadtypescriptfile[xits] … …

[NTG-context] xits-math font problem

Hi, I am using ‘xits’ font as math font which was fine for at least 10 days ago. it is defined in ’type-imp-unfonts.mkiv’ under ..tex/context/fonts/mkiv/ \loadtypescriptfile[xits] … \definetypeface [unfonts] [\s!mm] [\s!math] [xits] Suddenly it is not located by ConTeXt. Here is a sample

Re: [NTG-context] ntg-context Digest, Vol 164, Issue 29

Dear Wolfgang, “\setupmathematics[integral=nolimits]” did what I want. If I knew this two weeks ago, I saved my time to edit formulas. I should ask for this feature two weeks ago. There are so many things in ConTeXt that I don’t know. Thank you. Best regards, Dalyoung > \starttext > >

Re: [NTG-context] Problem with a macro

Dear Otared, All of your examples yield the same output in which the numbers locate at the top and at the bottom of the integral sign. Is it what you expected? I am looking for a way to place numbers at the right of the integral sign under the \startformula … \stopformula environment as the

Re: [NTG-context] Problem with a macro

Dear Otared, As you said, it is working well. However, the numbers 1, 4 located at the top and the bottom of the integral sign which is not usual in math. I have seen a discussion about such an output, but I may not see the result which I want. As you see in the following example, only the

[NTG-context] about \placeindex: uppercase initial and lowercase initial, two languages

Hi, To place the index at the end of the book, I put \placeindex before \stopproduct. It is compiled well. But, for the better output, I have two questions about the index. 1. In the output, it distinguished uppercase and lowercase initial. For example, S Squeeze theorem s set simple

Re: [NTG-context] How to make the first chapter number 0?

Dear Lukas, Thank you for the solution. It works fine for all, definitions, theorems, … except the numbers which I defined for exercise. I’ll change the number definition of exercise following your example. Thank you again. Best regards, Dalyoung

[NTG-context] How to make the first chapter number 0?

Hi, I’d like to start the chapter number from 0. So I tried “\setcounter[chapter][-1]” or “\setcounter[chapter][0]” to test, but it doesn’t work. Is there any good method to make the number of the first chapter 0? Thank you for reading. Best regards, Dalyoung

Re: [NTG-context] referencing the customized enumeration with framed title

Dear Hans, Thank you for the quick answer. Repalcing “p:=textext.rt();” and commenting out “headcommand=gobbleone…” with your suggestion, the references are working. However, there is a side effect. “Theorem 1.1” appears twice, one in the frame which I expected and one at the beginning of the

[NTG-context] referencing the customized enumeration with framed title

Hi, Some time ago, I am able to use following code(the framed title for Theorems and etc.) Thank Wolfgang and Otared again. Since it uses the customized style of numbering, there is a problem to reference them. As in the following code, \in{Definition}[] shows no number and \in{Theorem}[]

Re: [NTG-context] about the baseline of \inframed{text} in the enumerations

Dear Hans, Deleting “height=“ fixes the problem. Thank you so much. Best regards, Dalyoung ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl /

[NTG-context] about the baseline of \inframed{text} in the enumerations

Dear all, First, Happy New Year! In the output of the following sample code, the baseline of the framed text “Example” is slightly lower than the following sentences. But, in the wiki, \inframed is set center-aligned. Please tell me how to fix it. Thank you for reading. Best regards,

Re: [NTG-context] Typefile with Chinese, Korean or Japanase text

Dear Wim, There were a lot of discussions during the night. For the use CJK, I think that Wolfgang’s example is good enough(Nanum fonts are free). Here is another simple way. In 2012, Hans included a typescript file for Un Fonts, you can use it just do “\setupbodyfont”. The good thing is you

<    1   2   3   4   >