ups
5 \environment env-umbruch
6 \environment env-heading-sans
7 \environment env-layout
8 \environment env-figures
9 \environment env-pandoc
10 \setupcaptions[number=yes]
11 \setupdocument [
A number should have been here; I inserted '0'. (If you can't fig
ans
7 \environment env-layout
8 \environment env-figures
9 \environment env-pandoc
10 \setupcaptions[number=yes]
11 \setupdocument [
A number should have been here; I inserted '0'. (If you can't figure out
why I
needed to see a number, look up 'weird error&#x
[state=]
\setupcaptions[number=no]
\starttext
\startluacode
context.setupblank({"10mm"})
context.setupcombinations({distance="10mm", after=context.blank()})
context.startplacefigure({title = ""})
context.startcombination({nx=3, ny=4})
for i=1,
Hi,
I had the following structure which ended up at the bottom of a page:
---
\setupcaptions[number=no]
\placefigure[right]
{blah blah blah}
{%
\vskip -15pt
\externalfigure[DSC_2782][width=0.32\textwidth
n’t typeset a book before and various things are a challenge. The most recent is the following.
>
> I have \placelistoffigures some of which are logos (for the publisher and two granting bodies) that I have placed with:
>
> \setupcaptions[number=no]
> \starttplacefigure[
&
Am 29.05.24 um 17:35 schrieb Charles Doherty via ntg-context:
I have \placelistoffigures some of which are logos (for the publisher and two
granting bodies) that I have placed with:
\setupcaptions[number=no]
\starttplacefigure[
location={middle,high,low},
reference=fig:logo
ome of which are logos (for the publisher and two
> granting bodies) that I have placed with:
>
>\setupcaptions[number=no]
> \starttplacefigure[
> location={middle,high,low},
> reference=fig:logo,
> title=]
> {\externalfigure[FCLogo][width=0.045\textwidth]}
> \s
at Wolfgang was included. I have only ever
written to the list many years ago.
I haven’t typeset a book before and various things are a challenge. The most
recent is the following.
I have \placelistoffigures some of which are logos (for the publisher and two
granting bodies) that I have plac
s in inner margins though).
Here is an example:
\setuppapersize[A4]
\setuplayout[backspace=40mm, width=100mm, leftmargindistance=5mm,
leftmargin=30mm, rightmargindistance=5mm, rightmargin=50mm, topspace=10mm]
\setuppagenumbering[alternative=doublesided]
\setupcaptions[location={outermargin, l
).
I finally found the cause. I had these lines in my header:
```
\setupcaptions[minwidth=0.95\textwidth,
way=bychapter,
prefixsegments=chapter]
```
In the new context, this seem to apply to all captions, while in the old
context, it seems to apply only to those
se. I had these lines in my header:
```
\setupcaptions[minwidth=0.95\textwidth,
way=bychapter,
prefixsegments=chapter]
```
In the new context, this seem to apply to all captions, while in the old
context, it seems to apply only to those captions that are not specified
en
> Betreff: Re: [NTG-context] local footnotes and captions
>
> On 6/16/2022 12:43 PM, Denis Maier via ntg-context wrote:
> > Hi,
> >
> > another experiment with footnotes in captions, this time local footnotes :
> >
> > %%
On 6/16/2022 12:43 PM, Denis Maier via ntg-context wrote:
Hi,
another experiment with footnotes in captions, this time local footnotes :
%%%
\setupcaptions[location=top]
\starttext
\startlocalfootnotes
\placetable
Hi,
another experiment with footnotes in captions, this time local footnotes :
%%%
\setupcaptions[location=top]
\starttext
\startlocalfootnotes
\placetable
% The caption
{A breakfast table.\footnote{asdf}}
% the table
n\LeftMarginSize
> \LeftMarginSize=\dimexpr \backspace + \rightmarginwidth +
> \rightmargindistance \relax
> \newdimen\TextAreaSize
> \TextAreaSize=\dimexpr \textwidth + \rightmarginwidth + \rightmargindistance
> \relax
> \definefloat[marginfigure][marginfigures][figure]
> \
\relax
\newdimen\TextAreaSize
\TextAreaSize=\dimexpr \textwidth + \rightmarginwidth + \rightmargindistance
\relax
\definefloat[marginfigure][marginfigures][figure]
\setupfloat[marginfigure][location=inner,default=top,width=\TextAreaSize]
\setupcaptions[marginfigure][
leftmargin=\dimexpr \LeftMar
t; wrote:
>> >
>> > On 12/25/2020 9:47 PM, Christoph Reller wrote:
>> > > Hi,
>> > >
>> > > Consider the following MWE:
>> > >
>> > > \definefloat[combination][figure]
>> >
On Sat, Dec 26, 2020 at 10:54 AM Hans Hagen wrote:
> On 12/25/2020 9:47 PM, Christoph Reller wrote:
> > Hi,
> >
> > Consider the following MWE:
> >
> > \definefloat[combination][figure]
> > \setupcaptions[
> >number=no, %<- comment and table
On 12/25/2020 9:47 PM, Christoph Reller wrote:
Hi,
Consider the following MWE:
\definefloat[combination][figure]
\setupcaptions[
number=no, %<- comment and table appears
align=flushright]
\starttext
\startplacecombination[title=Combination]
\startfloatcombination
\startplaceta
Hi,
Consider the following MWE:
\definefloat[combination][figure]
\setupcaptions[
number=no, %<- comment and table appears
align=flushright]
\starttext
\startplacecombination[title=Combination]
\startfloatcombination
\startplacetable%[title=Table] %<- uncomment and table a
Hi!
I struggle with referencing subfigures. Combinations can't be
referenced to my knowledge, that's why I went with another float for
the inner subfigure. Example:
\useMPlibrary[dum]
\definefloat
[subfigure]
[subfigures]
[figure]
\setupcaptions
nehighlight[emph][style={\em}]
> \definehighlight[strong][style={\bf}]
>
> \setupfloat[table][default={here}]
>
> \definereferenceformat[figura][text={Figura~}]
> \definereferenceformat[tabla][text={Tabla~}]
>
> \setupcaptions[style={\sans\small},
> width=max
Tabla~}]
\setupcaptions[style={\sans\small},
width=max,
prefix=no,
align={flushleft,nothyphenated},
way=bytext]
\setupcaption[table][location=top]
\setupthinrules[width=15em] % width of horizontal rules
\setupxtable[frame=off,option=stretch,bodyfont=
ateinserts % nop in LMTX
\showframe
\setupcaptions[
headstyle={\ss\bfx},
align={flushleft,high},
prefixsegments=none,
location={bottom,low},
hang=yes,
]
\setupfootnotes[
width=\textwidth,
]
\starttext
\startplacefigure[location=page,title={\fakewords{5}{7}\footnote{\fakewords{20}{30}}}]%
n current LMTX and MkIV.
Hraban
\usemodule[visual]
\definecolor[fakerulecolor][c=.2,m=.1,k=.2]
\useMPlibrary[dum]
\automigrateinserts % nop in LMTX
\showframe
\setupcaptions[
headstyle={\ss\bfx},
align={flushleft,high},
hang=yes,
]
\starttext
\fakewords{10}{30}
% Footnotes, but no co
]
\stopplacefigure
\stopsection
\startsection[title=Two]
\startplacefigure[title=Test]
\externalfigure[dummy]
\stopplacefigure
\stopsection
\setcounter[figure][5] % next figure is no.6
\startsection[ownnumber=10,title={A section}]
\start
\setupcaptions[numberstopper={a}]
\startplacefigure[title=Test
365 22 91 | t...@cs.ru.nl
On 14 Aug 2020, 23:12 +0200, Taco Hoekwater , wrote:
> Hi Tim,
>
> I misunderstood your goal, sorry. Proposed setup below.
>
>
> But first, what I think is a bug in ConTeXt:
>
> Neither
> \setupcaptions
> [counter=object]
> nor
> \setup
Hi Tim,
I misunderstood your goal, sorry. Proposed setup below.
But first, what I think is a bug in ConTeXt:
Neither
\setupcaptions
[counter=object]
nor
\setupcaption
[figure]
[counter=object]
work. the caption always falls back to the ‘current float counter’; figure or
table
…) to be numbered consecutively prefixed by the chapter and section number,
> so 1.1.1, 1.1.2, 1.2.1, ...
>
> I’ve managed to change figure/table captions to do this by:
>
> \setupcaptions[
> way=bysection,
> prefixsegments=chapter:section,
> ]
>
> And I’ve
figure/table captions to do this by:
\setupcaptions[
way=bysection,
prefixsegments=chapter:section,
]
And I’ve setup my enumerations by:
\setupenumerations[
way=bysection,
prefix=yes,
prefixsegments=chapter:section,
]
But how do I use the same counter for figures, tables, and all
-3
\stopcombination}{}
\stopplacefigure
I tried to define a new float, say myfigure, which has captions below and then
I tried
\setupcaptions[location=top]
and
\setupcombinations[location=top]
but this does not work…
The label position in combinations is fixed and the easiest way to
tared
> On 1 Jun 2020, at 14:51, Tomas Hala wrote:
>
> Hi Otared,
>
> maybe there is a better, more system solution, but the following works:
>
> \setupcaptions[figure][location=bottom]
> \startplacefigure[title={A combination of three figures}] % this titl
Hi Otared,
maybe there is a better, more system solution, but the following works:
\setupcaptions[figure][location=bottom]
\startplacefigure[title={A combination of three figures}] % this title appears
below the figure
\startcombination[3*1]
{\framed[width=4cm]{a}}{\externalfigure[image-1
I tried to define a new float, say myfigure, which has captions below and then
I tried
\setupcaptions[location=top]
and
\setupcombinations[location=top]
but this does not work…
Thanks for any help: Otared
t[location=middle, width=27.5cm, height=18cm,
backspace=1cm,header=4cm]
\setupcaptions[location=none]
\setupbackgrounds[header][text][background={Logos}, state=repeat]
\defineoverlay
[Logos][{
\framed[width=\textwidth, height=3cm, align=right, strut=no, offset=none]{
\framed[width=0.280\textwidth,
tuppapersize[A4, landscape]
\setuplayout[location=middle, width=27.5cm, height=18cm,
backspace=1cm,header=4cm]
\setuppagenumbering[state=stop]
\setupcaptions[location=none]
\setupbackgrounds[header][text][background={Logos}, state=repeat]
\setupnumbering [location=]
\setupframed[offset=none]
\
:22 MESZ schrieb "Procházka Lukáš Ing." :
Hello,
what is the way to change caption text for figures to be "Fig." instead
of "Figure"?
\setupcaptions[numberstopper={.},] changes "Figure 1" to "Figure 1.",
but is there a similar key for the text?
Hi Lukas,
I use
\setuplabeltext[de][figure=Bild ]
You should use
\setuplabeltext[en][figure=Fig. ]
Greetings Lutz
Am 13. Juli 2018 10:30:22 MESZ schrieb "Procházka Lukáš Ing." :
>Hello,
>
>what is the way to change caption text for figures to be "Fig." instead
&g
Hello,
what is the way to change caption text for figures to be "Fig." instead of
"Figure"?
\setupcaptions[numberstopper={.},] changes "Figure 1" to "Figure 1.", but is
there a similar key for the text?
(\setupcations[prefix=] allows only "
Hello list members,
I am not sure how to achieve the following functionality:
Using \startplacefigure, I would like to place a number stopper *only*
when the caption text is non-empty, i.e.
Figure 1
Figure 2: A cow
This would be achieved through
\setupcaption [figure]
using numberstopper= I b
tsetups BG
\defineoverlay[bg][\useMPgraphic{crux}]
\setupbackgrounds[page][background=bg]
\stopsetups
\definestartstop[BG][commands=\setups{BG}]
% misc
\setupheadtext[en][pubs=]
\setupheadtext[en][content=]
\setupheadtext[en][index=]
\setuplabeltext[en][figure=??\;]
\setuplabeltext[en
Oh I sent my previous message too quickly…
I was just using the \at command for referring to captions, while you want to
use the \in command: maybe this is the problem.
> On 16 Jan 2018, at 22:25, bbvo...@home.nl wrote:
>
> Dear list,
>
> When I use the numberstopper option i
version 2018.01.14 15:55.
Best regards: OK
begin caption-numberstopper-0.tex
\setupexternalfigure[location=default]
\setupcaptions[numberstopper={:}]
\starttext
Take a look at \at{picture}[fig:cow] below.
\startplacefigure[reference=fig:cow,title=A dutch cow]
\externalfigure[cow
Dear list,
When I use the numberstopper option in setupcaptions it appears
unexpectedly in the references. The wiki states otherwise.
Wiki and a working example are listed below.
Kind regards,
Bernard
wiki: http://wiki.contextgarden.net/Command/setupcaptions:
numberstopper MKIV only. The
8:30 AM, Christoph Reller wrote:
>>> > It seems to me that the location given to \setupcaptions is not honored
>>> > correctly in floatcombinations anymore. Consider the following MWE:
>>> >
>>> > \setupcaptions[location=top, number=no]
>&
On Mon, Sep 18, 2017 at 7:19 AM Christoph Reller
wrote:
> On Sun, Sep 17, 2017 at 6:03 PM Hans Hagen wrote:
>
>> On 9/13/2017 8:30 AM, Christoph Reller wrote:
>> > It seems to me that the location given to \setupcaptions is not honored
>> > correctly in floatcomb
On Sun, Sep 17, 2017 at 6:03 PM Hans Hagen wrote:
> On 9/13/2017 8:30 AM, Christoph Reller wrote:
> > Hi,
> >
> > It seems to me that the location given to \setupcaptions is not honored
> > correctly in floatcombinations anymore. Consider the following MWE:
> >
Hi,
It seems to me that the location given to \setupcaptions is not honored
correctly in floatcombinations anymore. Consider the following MWE:
\setupcaptions[location=top, number=no]
\starttext
\placetable[][]{One}{
\bTABLE \bTR \bTD First \eTD \eTR \eTABLE}
\placefloat
;
> >> I don’t know how it is implemented, but prefixsegments (or prefixes) for
> >> captions only work when number is enabled.
> >>
> >> This makes sense if the section is part of the prefixsegments, but not
> >> if it isn’t.
> >>
e prefixsegments, but not
>> if it isn’t.
>>
>> Another sample that shows the problem:
>>
>>\mainlanguage[de]
>>\setupexternalfigures[location=default]
>>\setuphead[subsection][number=no]
>>\setupcaptions[prefixsegments=chapter]
>
>
> This makes sense if the section is part of the prefixsegments, but not
> if it isn’t.
>
> Another sample that shows the problem:
>
> \mainlanguage[de]
> \setupexternalfigures[location=default]
> \setuphead[subsection][number=no]
> \setupcaptio
for
captions only work when number is enabled.
This makes sense if the section is part of the prefixsegments, but not
if it isn’t.
Another sample that shows the problem:
\mainlanguage[de]
\setupexternalfigures[location=default]
\setuphead[subsection][number=no]
\setupcaptions[pr
\dorecurse{5}{\placefigure{Eine andere Kuh}
> {\externalfigure[cow.pdf]}}
> \dorecurse{5}{\chapter{Kapitel}
> \placefigure{Noch eine andere Kuh}{\externalfigure[cow.pdf]}}
> \stoptext
>
> In general, please provide minimal samples of code that show your problem.
Was no
m]
\stopplacefigure
\startplacefigure[title={Another Cow}]
\externalfigure[cow][width=2cm]
\stopplacefigure
\stoptext
>
> Minimal example:
>
> \setuppapersize[A6]
> \setupexternalfigures[location=default]
>
> \setupcaptions[way=bytext]
>
> \placefigure
>
]
\setupexternalfigures[location=default]
\setupcaptions[way=bytext]
\placefigure
{Cow}
{\externalfigure[cow][width=2cm]}
\placefigure
{Another Cow}
{\externalfigure[cow][width=2cm]}
___
If your question is of
",
>
> IOW, how to add "." after the figure "auto-text"?
\setupcaptions
[figure]
[
numberstopper={.},
]
\starttext
\startplacefigure
[
title={Caption},
]
\externalfigure[cow]
\stopplacefigure
\stoptext
>
> Best regards,
>
> Lukas
Hi,
I have come up with a simpler MWE which shows the problem more explicitly:
\setupcaptions[number=no]
\starttext
\startplacefigure[location=right]
\startfloatcombination
\placefigure{A Cow}{\externalfigure[cow.pdf]}
\placefigure{Another Cow}{\externalfigure[cow.pdf
ne=2.2ex] #1
>\stoptexdefinition
>
>\setupcaptions
> [
>width=fit,
>align=last,
>headstyle={\ss\bfx},
>style={\ss\tfx},
>before={\setnostrut},
>textcommand=\getvalue{caption:text},
> ]
>
>\starttext
>
>\startsubsection[t
\stoptexdefinition
\setupcaptions
[
width=fit,
align=last,
headstyle={\ss\bfx},
style={\ss\tfx},
before={\setnostrut},
textcommand=\getvalue{caption:text},
]
\starttext
\startsubsection[title={Subsection title}]
\input dawkins
\input dawkins
\setnostrut
>I would like to use grid snapping in my document: main text lines
>should be aligned to grid lines but figure caption text should not.
>
>I have this code:
>
>\setuplayout[grid=yes]
>\showgrid
>
>\setupcaptions[width=fit,align=last,headstyle={\ss\bfx},style={\ss\tfx}]
Dear context users:
I would like to use grid snapping in my document: main text lines
should be aligned to grid lines but figure caption text should not.
I have this code:
\setuplayout[grid=yes]
\showgrid
\setupcaptions[width=fit,align=last,headstyle={\ss\bfx},style={\ss\tfx}]
\starttext
es or figure legends?
Here is an example:
\setuplayout[grid=yes]
%\showgrid
\setupcaptions[location=bottom,width=fit,align=last,headstyle={\tfxx},style={\tfxx}]
\starttext
\input ward
\input tufte
\placefigure{An example figure. \input ward }{\framed[width=0.5\textwidth]{A
figure}}
\input zapf
\sto
onnector key.
\starttext
\section{This is a section}
\setupcaptions[prefixsegments=section,prefixconnector=-]
\startplacefigure[title=\tex{setupcaptions[prefixconnector=-]}]
\externalfigure[dummy][width=.5\textwidth]
\stopplacefigure
\stopte
le for the use of the prefixconnector key.
\starttext
\section{This is a section}
\setupcaptions[prefixsegments=section,prefixconnector=-]
\startplacefigure[title=\tex{setupcaptions[prefixconnector=-]}]
\externalfigure[dummy][width=.5\textwidth]
\stopplacefigure
\stoptext
Wo
Meer, Hans van der <mailto:h.vanderm...@uva.nl>
10. Oktober 2016 um 09:41
Here is the example. \setupcaptions has no effect, however
\setupfloatcaption does (assuming of course I didn't make a silly
mistake ;-). Thus it is no problem to get the effect desired, but
possibly \se
Here is the example. \setupcaptions has no effect, however \setupfloatcaption
does (assuming of course I didn't make a silly mistake ;-). Thus it is no
problem to get the effect desired, but possibly \setupcaptions should be
deprecated, or perhaps reimplemented to calling \setupfloatcapti
Meer, Hans van der <mailto:h.vanderm...@uva.nl>
9. Oktober 2016 um 14:36
Is this still valid? Using \setupcaptions[prefixconnector=-] doesn't
seem to make a difference for \startplacefigure.
Do you have a example
Is this still valid? Using \setupcaptions[prefixconnector=-] doesn't seem to
make a difference for \startplacefigure.
Hans van der Meer
On 22 Apr 2014, at 08:25, Wolfgang Schuster
mailto:schuster.wolfg...@gmail.com>> wrote:
Am 22.04.2014 um 02:57 schrieb Rik Kabel
/mkiv/strc-flt.mkvi you can find the following definitions:
\let\setupcaption \setupfloatcaption
\let\setupcaptions\setupfloatcaption
Cheers, Henri
On 08/31/2016 09:59 AM, Mikael P. Sundqvist wrote:
> On Tue, Aug 30, 2016 at 9:25 PM, Henri Menke wrote:
>> Dear list,
>>
>>
upcaption[table][location=top]
\setupcaptions[style={\tfx}, width=.9\textwidth,align=middle]
\unprotect
\appendtoks
\setupbackgrounds[\v!page][\c!background=\makeupparameter\c!background]
\to \t_page_makeup_every_setup
\protect
\defineseparatedlist[CSV]
[separator={,},
quotech
ethod=two]
>> \setupalign[r2l]
>>
>> %% If we don't provide the numbercommand, we'll see reverse numbering
>> starting from 10.
>> \setuphead[chapter,title,section,subject][numbercommand=\righttoleft]
>> %% The following does not accept any numbercommand but it has
mand, we'll see reverse numbering
> starting from 10.
> \setuphead[chapter,title,section,subject][numbercommand=\righttoleft]
> %% The following does not accept any numbercommand but it has
> numberconversion.
> %% As a result figure numbers are shown in reverse.
> \setupcap
t it has
numberconversion.
%% As a result figure numbers are shown in reverse.
\setupcaptions[numberstopper={:}]
%% Footnotes are fine and accept conversion.
%% Page numbers are also okay.
\starttext
\dorecurse{20}{
\section{Test}
This is a very simple text.
And we have a footnote\footnote{Foo
't provide the numbercommand, we'll see reverse numbering
starting from 10.
\setuphead[chapter,title,section,subject][numbercommand=\righttoleft]
%% The following does not accept any numbercommand but it has
numberconversion.
%% As a result figure numbers are shown in reverse.
\setupca
(in stead of the expected Figure 1.2)
I would like all figures (and floats) to be numbered in sequence
according the chapter numbering:
Chapter 1: Figure 1.1, Figure 1.2, Table 1.3, Figure 1.4, etc
Chapter 2: Figure 2.1, Figure 2.2 etc
I've tried several \setupcaptions options but was unable
, Figure 1.4, etc
Chapter 2: Figure 2.1, Figure 2.2 etc
I've tried several \setupcaptions options but was unable to solve so far.
Everything works as expected when using a numbered subsubsection so the problem
is somehow related to the number=no option
Minimal example:
\setuphead[chapter, se
I am using the following to style floating tables and am having some
difficulties with footnotes in the tables.
\enableregime[utf]
\setupbodyfont[modern]
\setupbodyfont[11pt]
\setupfloats[location=middle,spacebefore=0ex,spaceafter=8ex]
\setupcaptions[location=top,inbetween
xwidth=\measure{maxWidth},
maxheight=\measure{maxHeight}
]
\setupcaptions[style=\ss\tfx,align=flushleft,number=no,width=\textwidth]
\definefloat[bleedfigure][figure]
\setupfloat[bleedfigure][
outermargindistance=-2\measure{Bleed},
%leftmargindistance=-2\measure{Bleed},
Bumping another old unsolved mystery.
On 2014-04-22 22:40, Rik Kabel wrote:
> On 2011-08-05, Wolfgang wrote with regard to section numbering not
> appearing in float captions when numbering is off for the section but
> called for by the chapter
> (http://www.mail-archive.com/ntg-context%40ntg.nl/
optext
>
>
>
> I attach the generated pdf output: caption-example.pdf
>
> Unfortunately none of the above code variants gives the correct result.
> Despite of the bad
result.
Despite of the bad "wording" I don't understand why numberstopper (.)
doesn't appear after suffix (. ábra) in figure 2.
Any way to fix these?
The alignment=last option works. (This option is not mentioned among the
options at the contextgarden wiki site,
http://wiki.context
On Sat, Mar 14, 2015 at 1:10 PM, Hans Hagen wrote:
> On 3/14/2015 10:50 AM, Mojca Miklavec wrote:
>>
>> Hello,
>>
>> I'm using the following code to make the figure captions smaller:
>> \setupcaptions[style={\switchtobodyfont[8pt]}]
>>
>&
On 3/14/2015 10:50 AM, Mojca Miklavec wrote:
Hello,
I'm using the following code to make the figure captions smaller:
\setupcaptions[style={\switchtobodyfont[8pt]}]
Now I'm looking for the magic keywoard to also decrease the size of
captions inside combinations, as in the foll
Hello,
I'm using the following code to make the figure captions smaller:
\setupcaptions[style={\switchtobodyfont[8pt]}]
Now I'm looking for the magic keywoard to also decrease the size of
captions inside combinations, as in the following case for example
(otherwise the "subca
> Am 13.02.2015 um 08:53 schrieb j. van den hoff :
>
> On Fri, 13 Feb 2015 04:54:58 +0100, Wolfgang Schuster
> wrote:
>
>> No, you’re right. I used the wrong command (\at is used to show the page
>> where to float was placed)
>
> understood.
>
>> and so far there is only a workaround for th
I want to use `numberstopper' for figure caption customization like so:
\setupcaptions[numberstopper={:}]
this works fine for the caption itself (i.e. I get, e.g. "Figure 1:
caption text") _but_
references to the figure via a defined label such as [fig:example]
in the body
On Fri, 13 Feb 2015 04:54:58 +0100, Wolfgang Schuster
wrote:
No, you’re right. I used the wrong command (\at is used to show the page
where to float was placed)
understood.
and so far there is only a workaround for this problem. What you can do
OK, does this require some sort of formal
> Am 12.02.2015 um 23:14 schrieb j. van den hoff :
>
>>> On 12 Feb 2015, at 22:31, Wolfgang Schuster
>>> wrote:
>>>
>>>
>>>> Am 12.02.2015 um 17:37 schrieb j. van den hoff :
>>>>
>>>>
>>>> I want
works in mkii, though…).
Actually the command used by Joerg, that is
\setupcaptions[numberstopper={:}]
works also.
Best regards: OK
On 12 Feb 2015, at 22:31, Wolfgang Schuster
wrote:
Am 12.02.2015 um 17:37 schrieb j. van den hoff
:
I want to use `numberstopper' for f
, that is
\setupcaptions[numberstopper={:}]
works also.
Best regards: OK
> On 12 Feb 2015, at 22:31, Wolfgang Schuster
> wrote:
>
>
>> Am 12.02.2015 um 17:37 schrieb j. van den hoff :
>>
>>
>> I want to use `numberstopper' for figure caption cus
'communication channel' being which? this list? bug tracker?
best regards,
joerg
Best regards: OK
On 12 Feb 2015, at 17:37, j. van den hoff
wrote:
I want to use `numberstopper' for figure caption customization like so:
\setupcaptions[numberstopper={:}]
this works fine
> Am 12.02.2015 um 17:37 schrieb j. van den hoff :
>
>
> I want to use `numberstopper' for figure caption customization like so:
>
> \setupcaptions[numberstopper={:}]
>
> this works fine for the caption itself (i.e. I get, e.g. "Figure 1:
> caption text&q
it does not work as expected anymore.
So it is a bug introduced recently.
Probably Hans should be informed about it.
Best regards: OK
> On 12 Feb 2015, at 17:37, j. van den hoff wrote:
>
>
> I want to use `numberstopper' for figure caption customization like so:
&g
I want to use `numberstopper' for figure caption customization like so:
\setupcaptions[numberstopper={:}]
this works fine for the caption itself (i.e. I get, e.g. "Figure 1:
caption text") _but_
references to the figure via a defined label such as [fig:example]
in the body text
igure without the `:' occuring as part of the reference (i.e. it
should read "Figure 1: caption_goes_here" and the
cross-reference then should read "see Figure 1" rather than "see Figure
1:".
Using something like
\setupcaptions[width=0.9\textwidth, numbe
axwidth=...].
I can cheat as on the third figure above, but that seems like an ugly
approach to me.
can you test this a bit:
\unprotect
\setupcaptions
[\c!maxwidth=.75\hsize]
Thank you very much. The patch that you sent me for strc-flt.mkvi
seems to work as expected on a long document wit
> {\hbox to
>> .75\textwidth{\hss\framed[width=\textwidth,height=.2\textwidth]{}\hss}}
>>
>> \input tufte
>>
>> \stoptext
>>
>> I've seen an option maxwidth, but only in connection to
>> \externalfigure[...][maxwidth=...].
>>
>> I c
can you test this a bit:
\unprotect
\setupcaptions
[\c!maxwidth=.75\hsize]
\def\strc_floats_prepare_stack_caption_auto
{\ifx\p_strc_floats_caption_align\empty \else
\doifnotinset\v!middle\p_strc_floats_caption_align{\let\captionovershoot\!!zeropoint}%
\fi
\edef\
Hi,
In the following code, I would like columns that contain the figures have a
white background.
Best regards,
Fabrice
\definecolor[mycolor][c=0.1, m=0.00, y=0.00, k=0.00]
\setupcaptions[number=no]
\starttext
\startframedtext[
width=\textwidth,
frame=on,
location=middle
fault}]
\setupindenting[yes, \the\baselineskip]
%\definefontfamily [figurefamily] [serif] [Latin Modern Sans]
%\setupfloats [align=middle,
style={\switchtobodyfont[figurefamily]}, indenting=no]
\setupcaptions [style=ss]
\setupframed[style=it]
\starttext
\input knuth
\startplacefigure[
1 - 100 of 373 matches
Mail list logo
