[Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you advice me what to do ?

2005-12-29 Thread Ramy Motawei
Dear Sir, I am having a problem with ntop and I hope that you could tell me the reason for it. I work in a major ISP in Egypt and I was interested in discovering the amount of bandwidth consumed by P2P application in the internet traffic of the users in my network using ntop. I am

RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you advice me what to do ?

2005-12-29 Thread Ramy Motawei
Dear Sir, Thank you for your fast reply, so is there is a site that I can download a version of ntop for windows that is not restricted to this small number of packets? Please advice. Best Regards Ramy mohsen Motawei Planning and Designing Engineer Data communication dep.

RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you advice me what to do ?

2005-12-29 Thread Burton Strauss
The demo version records only 1000 packets - I think drawing ANY conclusion from that small a sample is unreliable. -Burton From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ramy MotaweiSent: Thursday, December 29, 2005 2:54 AMTo: ntop@Unipi.ITCc: Mohamed GamalSubject:

RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic . could you advice me what to do ?

2005-12-29 Thread Willy, Andrew
I'm pretty sure the Windows version isn't free. Andrew -Original Message- From: Ramy Motawei [mailto:[EMAIL PROTECTED] Sent: Thursday, December 29, 2005 7:31 AM To: ntop@Unipi.IT Cc: Mohamed Gamal Subject: RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you

RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you advice me what to do ?

2005-12-29 Thread Ramy Motawei
What about the unix or linux versions, do you have an idea if the unix and linux sources available to download from the ntop site are full versions or just demos as well? Ramy mohsen Motawei Planning and Designing Engineer Data communication dep. LINKdotNET 3 mussadak st. Dokki, Giza, Egypt

RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic . could you advice me what to do ?

2005-12-29 Thread Willy, Andrew
They are full versions. Andrew -Original Message- From: Ramy Motawei [mailto:[EMAIL PROTECTED] Sent: Thursday, December 29, 2005 8:40 AM To: ntop@Unipi.IT Cc: Mohamed Gamal Subject: RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you advice me what to do ?

RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you advice me what to do ?

2005-12-29 Thread Ramy Motawei
Thank you Ramy mohsen Motawei Planning and Designing Engineer Data communication dep. LINKdotNET 3 mussadak st. Dokki, Giza, Egypt E-mail:[EMAIL PROTECTED] Web: www.link.net Tel.: +202 336 77 11 - Ext:1410 Fax: +202 336 49 10 Confidentiality: This e-mail communication and any attachments

RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you advice me what to do ?

2005-12-29 Thread Burton Strauss
How about LOOKING at SourceForge? We don't mind helping people - but it's self help - and we DO expect you to have at least LOOKED at the resources that are already available first... docs/FAQ: Q. What's the scoop with ntop on Windows? A. Semi-officially, ntop for Windows 95/98/ME/NT/2K is

RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you advice me what to do ?

2005-12-29 Thread Burton Strauss
Wrong. ntop itself is available without charge - it's simply a major PITA to build under Windows. If you want the convenience of a pre-built executable, Luca makes it available - for a convenience fee - at http://shop.ntop.org. -Burton -Original Message- From: [EMAIL PROTECTED]

RE: [Ntop] I am having a problem, ntop doesn't detect P2P traffic. could you advice me what to do ?

2005-12-29 Thread Burton Strauss
Nope ... you can build the Windows executableyourself, or - for a convenience fee - Luca makes a pre-built binary available through http://shop.ntop.org. -Burton From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ramy MotaweiSent: Thursday, December 29, 2005 8:31 AMTo:

[Ntop] Packet Capture

2005-12-29 Thread Colombo Alessandro
Hello, Im having problems capturing packets with my Linux box. The LB runs Fedora Core 4 and its connected to the main switch with a network card. It has another network card used to capture packets. The switch permits to configure port mirrors, but one per time: I mean, I can set a

Re: [Ntop] Packet Capture

2005-12-29 Thread Scott Huffman
Are there any vlans? Or could you create them? I'm pretty sure on a cisco switch you can mirror (span) a port to monitor a whole vlan. On 12/29/05, Colombo Alessandro [EMAIL PROTECTED] wrote: Hello, I'm having problems capturing packets with my Linux box. The LB runs Fedora Core 4

RE: [Ntop] Packet Capture

2005-12-29 Thread Burton Strauss
Read the article in docs/FAQ on switched networks. Also read up on the -m | --local-hosts switch. But off-hand, sounds like you need either to invest in a better switch or re-think your layout. -Burton From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Colombo

[Ntop-dev] [patch] fix broken configure option handling

2005-12-29 Thread Mike Frysinger
all of the AC_ARG_ENABLE() macros used in configure.in set the 3rd option incorrectly ... find attached a patch to fix the issue -mike Index: configure.in === RCS file: /export/home/ntop/ntop/configure.in,v retrieving revision 2.246

Re: [Ntop-dev] [patch] fix broken configure option handling

2005-12-29 Thread Mike Frysinger
On Thursday 29 December 2005 20:46, Mike Frysinger wrote: all of the AC_ARG_ENABLE() macros used in configure.in set the 3rd option incorrectly ... find attached a patch to fix the issue actually that patch is slightly broken as well ... at first glance i thought they were all AC_ARG_ENABLE()

[Ntop-dev] [rfc] cleaning up the makefile hacks in plugins/Makefile.am

2005-12-29 Thread Mike Frysinger
can someone list the requirements for the plugins dir in terms of what is supposed to be installed ? all those hack rules can probably be cut out with proper autotool rules, i just need to know what exactly needs to be done ... also, the way the thing installs now is not safe ... the

RE: [Ntop-dev] [patch] fix broken configure option handling

2005-12-29 Thread Burton Strauss
So that let's us use --enable-i18n, --disable-i18n and even --enable-i18n=no ? And have them work as expected?? Cool! -Burton -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Frysinger Sent: Thursday, December 29, 2005 8:07 PM To:

Re: [Ntop-dev] [patch] fix broken configure option handling

2005-12-29 Thread Mike Frysinger
On Thursday 29 December 2005 21:58, Burton Strauss wrote: So that let's us use --enable-i18n, --disable-i18n and even --enable-i18n=no ? And have them work as expected?? exactly -mike ___ Ntop-dev mailing list Ntop-dev@unipi.it

Re: [Ntop-dev] [rfc] cleaning up the makefile hacks in plugins/Makefile.am

2005-12-29 Thread Mike Frysinger
On Thursday 29 December 2005 22:01, Mike Frysinger wrote: can someone list the requirements for the plugins dir in terms of what is supposed to be installed ? all those hack rules can probably be cut out with proper autotool rules, i just need to know what exactly needs to be done ... also,