Is this on Server 2016?
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Kennedy, Jim
Sent: Thursday, June 29, 2017 12:32 PM
To: 'ntsysadm@lists.myitforum.com'
Subject: RE: [NTSysADM] Exchange time insanity.
So that is the
If users have not successfully synced those files back to a server and you do a
mass reset or policy change you are GOING to have people lose data, so be
extremely careful. I do use the registry key method even on modern Windows 10
computers and it does work, but it resets that cache for all
Did you remember to add either "authenticated users" or "domain computers" with
read access on the advanced tab after you added the security filtering to apply
just to the group?
-Bonnie
-Original Message-
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
For this scenario you might consider adding a deny for applying the policy to
the policies for the other groups. It's really not necessary as the last
policy applied will take precedence but would potentially help with
troubleshooting logic in case a system does end up in more than one group.
It’s been several years, but whenever we run into this we start to investigate
device firmware and driver updates, which often can correct the problem. Just
do them one at a time, usually starting with the NIC driver, then bios, then
chipset, and anything else you may find that could be
redicate.
hth,
jlc
From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Friday, June 2, 2017 3:05 PM
To: ntsysadm@lists.myitforum.com<mailto:ntsysadm@lists.myitforum.com>
Subject: [NTSysAD
stsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Friday, June 2, 2017 3:05 PM
To: ntsysadm@lists.myitforum.com<mailto:ntsysadm@lists.myitforum.com>
Subject: [NTSysADM] WMI query for AD
Trying to craft a
, 2017 9:21 AM
To: ntsysadm@lists.myitforum.com
Subject: Re: [NTSysADM] Re: Using GPO to allow pop-ups and to set compatibility
settings - MORE
On Fri, Jun 2, 2017 at 12:12 PM, Miller Bonnie L.
<mille...@mukilteo.wednet.edu<mailto:mille...@mukilteo.wednet.edu>> wrote:
Just getting
Just getting caught up, I don't see that anyone has mentioned it but
compatibility view is horrible and it has all sorts of limitations, including
that it really only handles addresses out to two domain levels. So for
example, you can add xyz.foo.edu, but it actually will put all of foo.edu
Haven't seen this but if it doesn't follow through a restart, try tapping the
esc key and see if it fixes it, as that is the common workaround for several
weird windows interface bugs like this when they crop up. If not, it sort of
sounds like it could be an IE zone settings issue as well, so
n't belong in
the Enterprise Admins group. This document highlights some examples of
Enterprise Admins group requirements:
http://www.w2k.vt.edu/docs/EAScenarios.pdf
--
Espi
On Thu, May 25, 2017 at 6:48 AM, Miller Bonnie L.
<mille...@mukilteo.wednet.edu<mailto:mille...@mukilteo.wednet.edu
com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Wednesday, May 24, 2017 2:59 PM
To: ntsysadm@lists.myitforum.com<mailto:ntsysadm@lists.myitforum.com>
Subject: [NTSysADM] Managed Service Accounts
So, I'm doing a regular review of admin accounts and found somethin
So, I'm doing a regular review of admin accounts and found something odd I want
to ask about before I change that I can't find any reference to in Google-land.
Our "Enterprise admins" group has a managed service account in it, which I
don't think should be there, but I really don't know as we
istsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: 20 April 2017 16:46
To: New NT System Admin List
(NTSysADM@lists.myITforum.com<mailto:NTSysADM@lists.myITforum.com>)
<ntsysadm@lists.myitforum.com<mailto:ntsysadm@lists.myitforum.com>>
Subject: RE: [NTSysADM] Folder Redirect
An
And just a couple of other thoughts from issues we've seen over the years and
found during testing:
1) Don't try to redirect different users' folders to the same location
2) Folder redirection REQUIRES the users have full control in the
location, it doesn't work with modify
3)
+1, we're doing pretty much exactly what Jim describes as well for valid
software exceptions.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Kennedy, Jim
Sent: Monday, April 10, 2017 7:56 AM
To: ntsysadm@lists.myitforum.com
Subject: [NTSysADM] RE:
Windows Volume Shadow Copies?
-Bonnie
-Original Message-
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Kurt Buff
Sent: Friday, March 31, 2017 1:19 PM
To: ntsysadm
Subject: [NTSysADM] WTF? Way too many Volume/Disk
+1 and if it's already over 2TB, hopefully it's GPT.
-Original Message-
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Michael B. Smith
Sent: Tuesday, March 14, 2017 2:14 PM
To: ntsysadm@lists.myitforum.com
Subject: RE: [NTSysADM] Expanding a
And are other client pcs really getting addresses, or is it just that their
leases haven’t run out yet? What happens if you release one of the leases from
a “working” computer, does it correctly get a new one assigned?
Besides looking for another DHCP server, is there ANY chance someone has
If you really must, read up on site link bridging. I’ve personally never had
to disable it, but it sounds like what you’re looking for.
https://technet.microsoft.com/en-us/library/cc753638(v=ws.10).aspx
-Bonnie
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
.
From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Friday, January 27, 2017 7:43 AM
To: ntsysadm@lists.myitforum.com<mailto:ntsysadm@lists.myitforum.com>
Subject: RE: [NTSysADM] Group Pol
We’re very similar to what Jim has, but somewhat larger with 2000+ staff
(including subs) and 15,000+ students, 20 schools with a new one on the way, an
ECEAP site, and three admin sites. Our 6 repair techs are assigned to specific
buildings and may deal with specialized apps and hardware at
That's troubling, we have many of the pieces in place now, but haven't gone
live yet as we are trying to rid ourselves of roaming profiles first--very
painful over DA to wait around for those to load, if they do at all.
Testing from here has worked, but that has all been through a couple of
If that is the user's primary group (which I can see from below has been set),
the value is stored in a different attribute of the user account called
primaryGroupID, and that will be a number value. Certain built-in groups will
always be the same number, but others like domain groups are
DM] RE: Missing tabs in Win10 ADUC
Uninstall/reinstall the RSAT tools?
Kurt
On Fri, Dec 16, 2016 at 11:43 AM, Miller Bonnie L.
<mille...@mukilteo.wednet.edu<mailto:mille...@mukilteo.wednet.edu>> wrote:
Hmm.. I don’t know exactly when it started, but I’ll ask—it was working at one
point si
...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Friday, December 16, 2016 1:36 PM
To: ntsysadm@lists.myitforum.com<mailto:ntsysadm@lists.myitforum.com>
Subject: [NTSysADM] Missing tabs in Win10 ADUC
I have a tec
ADUC
Are the Advanced Features enabled in the snap-in?
On Dec 16, 2016 13:36, "Miller Bonnie L."
<mille...@mukilteo.wednet.edu<mailto:mille...@mukilteo.wednet.edu>> wrote:
I have a tech person who is missing several tabs in ADU on her computer when
she looks at user account on
I have a tech person who is missing several tabs in ADU on her computer when
she looks at user account on her Win10 (still 1511 plus updates) machine. I'm
finding a lot of hits online about which dll to reregister if missing the
RDS/TS related tabs, but that's not what is missing here, its:
312=4311b7b1-332d-4242-8585-36954b184dc7>
The Accidental Citrix Admin
From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Wednesday, December 7, 2016 9:28 AM
To: ntsysadm@lists.m
listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Tuesday, December 6, 2016 4:03 PM
To: ntsysadm <ntsysadm@lists.myitforum.com<mailto:ntsysadm@lists.myitforum.com>>
Subject: [NTSysADM] code-s
I feel like I must be missing a step here, so am hoping someone has seen this.
I'm most of the way through standing up a new internal CA root/subordinate
combo for our internal AD and migrating certificates, but have run into a
problem with code signing certs.
The new servers are 2012 R2,
Just guessing here--you might try:
Cmd as administrator
Sfc /scannow
And see if it will repair anything in the OS?
You may be faced with attempting a repair installation. I haven’t had to face
anything like this since Server 2000 and 2003 R2, but never had much luck (we
used
Another vote here for Enterprise mode. We tried using the old-style
compatibility settings wither earlier IE versions and were sorely disappointed
in the results. Specifically, you could only define down to two domain name
levels and couldn't define any specific sites outside of full domain
...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Friday, May 20, 2016 10:33 AM
To: ntsysadm@lists.myitforum.com<mailto:ntsysadm@lists.myitforum.com>
Subject: [NTSysADM] RE: DHCP failover
I attended a 1-hour web
I attended a 1-hour webcast with MS when DHCP failover first came out on 2012
so we could set it up, as we were just consolidating our datacenter at the time
and it made sense (we didn't already have split-scope). The way it was
described is that Microsoft didn't invent failover, they coded it
Interesting... I've not had that trouble with reservations not replicating, but
we always force scope replication after making the changes in the GUI, so maybe
it's doing the same thing as your PS script.
-Bonnie
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
I just finished a similar year-long project a few months ago (pretty much
because it’s just me) moving our Hyper-V 2008 R2 failover cluster to Hyper-V
2012 R2 this way. I hadn’t seen yet they are going to allow 2012 R2 to 2016
upgrade, so that is good to hear for the future.
The only major
+1 and check firmware & driver versions, bios, etc. The only other time I saw
something remotely like that after fixing those things was when the switch the
server was plugged into was failing (but not failed). In that particular case,
some things would copy but it would always choke on
Any chance someone has turned on Dynamic Access Control?
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of David McSpadden
Sent: Tuesday, April 7, 2015 7:50 AM
To: ntsysadm@lists.myitforum.com
Subject: RE: [NTSysADM] access denied on mapped drive
Done and
To: ntsysadm@lists.myitforum.com
Subject: RE: [NTSysADM] access denied on mapped drive
Where would I look?
From: listsad...@lists.myitforum.commailto:listsad...@lists.myitforum.com
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Tuesday, April 07, 2015 11:09 AM
To: ntsysadm
, 2015 10:52 AM
To: ntsysadm@lists.myitforum.com
Subject: Re: [NTSysADM] RE: Java and proxy.pac
On Wed, Apr 1, 2015 at 12:27 PM, Miller Bonnie L.
mille...@mukilteo.wednet.edu wrote:
Once our Server applications analyst ... has the rights to receipt
printing in our SIS ...
I don't know what
@lists.myitforum.com
Subject: Re: [NTSysADM] RE: Java and proxy.pac
On Mon, Mar 30, 2015 at 8:02 AM, Miller Bonnie L.
mille...@mukilteo.wednet.edu wrote:
Thanks Ben--yes, the Java app does NOT work if we manually define the
path to the proxy.pac file, which is why I was asking if anyone has it
working
Have you tried clearing the GPP cached files (Delete everything under the
C:\ProgramData\Microsoft\Group Policy\History folder)
and then running GPupdate /force on each machine?
-Bonnie
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of David McSpadden
At a minimum, I’d be scanning for malware from bootable media at this point ☹
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Christopher Bodnar
Sent: Wednesday, April 1, 2015 12:50 PM
To: ntsysadm@lists.myitforum.com
Subject: [NTSysADM] OT: Home network
Message-
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Ben Scott
Sent: Friday, March 27, 2015 3:41 PM
To: ntsysadm@lists.myitforum.com
Subject: Re: [NTSysADM] RE: Java and proxy.pac
On Fri, Mar 27, 2015 at 4:10 PM, Miller Bonnie L.
mille
...@lists.myitforum.commailto:listsad...@lists.myitforum.com on
behalf of Miller Bonnie L.
mille...@mukilteo.wednet.edumailto:mille...@mukilteo.wednet.edu
Sent: Friday, March 27, 2015 10:16 AM
To: ntsysadm@lists.myitforum.commailto:ntsysadm@lists.myitforum.com
Subject: [NTSysADM] Java and proxy.pac
After many
configuration and Java applets no longer tried to go direct.
jlc
From: listsad...@lists.myitforum.commailto:listsad...@lists.myitforum.com
listsad...@lists.myitforum.commailto:listsad...@lists.myitforum.com on
behalf of Miller Bonnie L.
mille
You really should consider restricted groups for the very last part of your
question. It won't prevent them from elevating and adding their account, but
it will remove their added account when the GP refreshes (90 minutes, or less
if you change it for these machines).
I would also ask, do
To the iscsi, I'm not familiar with Synology, but does it have a group IP,
AKA cluster IP, that you always access and works across all four NICs? If so,
then you will likely use that group IP as your target. If it supports MPIO,
you could then connect from both server NICs.
From:
Only issue I've ever had with moving over the IP from the old to new DHCP
server is that sometimes you have to reauthorize the new one. Just make sure
all of your DNS (and WINS if in use) records update correctly at each step in
the IP changes before you move to the next.
Only other catch on
Are you sure it's a Pro and they aren't running Windows RT?
https://technet.microsoft.com/en-us/library/jj613768.aspx
CMAK can be used to deploy VPN profiles on all devices running Windows, except
those running Windows RT.
-Bonnie
From: listsad...@lists.myitforum.com
Engineer
From: listsad...@lists.myitforum.commailto:listsad...@lists.myitforum.com
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: 27 February 2015 15:31
To: ntsysadm@lists.myitforum.commailto:ntsysadm@lists.myitforum.com
Subject: RE: [NTSysADM] Rogue installer process
SSL/TLS settings?
-Original Message-
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of David McSpadden
Sent: Wednesday, February 18, 2015 10:36 AM
To: ntsysadm@lists.myitforum.com
Subject: Re: [NTSysADM] RE: Ie not opening website
Typing with one
...@lists.myitforum.commailto:listsad...@lists.myitforum.com
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Wednesday, February 4, 2015 12:23 PM
To: ntsysadm@lists.myitforum.commailto:ntsysadm@lists.myitforum.com
Subject: [NTSysADM] RE: Anyone successfully using Microsoft NLB
...@lists.myitforum.commailto:listsad...@lists.myitforum.com
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Wednesday, February 4, 2015 12:23 PM
To: ntsysadm@lists.myitforum.commailto:ntsysadm@lists.myitforum.com
Subject: [NTSysADM] RE: Anyone successfully using Microsoft NLB in guests
When you say just sits, does it actually open and spin/wait, or not open at
all? If the latter, think keyboard or mouse issues on the other end.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of David McSpadden
Sent: Thursday, February 05, 2015 7:36 AM
...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Miller Bonnie L.
Sent: Thursday, January 22, 2015 12:59 PM
To: ntsysadm@lists.myitforum.com
Subject: [NTSysADM] RE: Anyone successfully using Microsoft NLB in guests on
Hyper-V 2012 R2 host servers?
So this AM I took the live servers
Interesting to say the least…
http://it.slashdot.org/story/15/01/29/141243/georgia-institute-of-technology-researchers-bridge-the-airgap
Hacked has a piece about Georgia Institute of Technology researchers keylogging
from a distance using the electromagnetic radiation of CPUs. They can
Not specific to hosting, but the MyItForum also hosts a busy Exchange list:
http://myitforum.com/myitforumwp/community/email-lists-2/#exchange
-Bonnie
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Richard McClary
Sent: Thursday, January 29, 2015 6:25
Haven't done this in a long time-I think I misremembered that it's in policy.
Have a look at these:
http://blogs.technet.com/b/askpfeplat/archive/2011/12/12/how-to-implement-the-central-store-for-group-policy-admin-templates-completely-hint-remove-those-adm-files.aspx
Yes, you do have to both set up the central store and point your machines to
use the central store location (easiest with policy).
In the meantime, just copy the same files to the local machine's folders,
usually c:\windows\policydefinitions to get it going and usable. (Restart GPMC
after
And you got the adml files over into the central store location also, in their
language subfolder?
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Kennedy, Jim
Sent: Tuesday, January 27, 2015 11:53 AM
To: ntsysadm@lists.myitforum.com
Subject: RE:
I don't see mention of the excel15.adml file-that needs to be in your language
folder for the language you are using (en-us).
So, the *.admx files go in \PolicyDefinitions
And the *.adml files go in \PolicyDefinitions\language-folder
I don't think you need the *.opal files unless you are
Good catch Michael =)
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Michael B. Smith
Sent: Tuesday, January 27, 2015 1:30 PM
To: ntsysadm@lists.myitforum.com
Subject: RE: [NTSysADM] Adding admin templates to GPO
Because, as I said a number of hours
Just to confirm, you did copy ALL of the other *.admx and *.adml files to the
central store location and not JUST the new one for Excel, right?
And I just realized why I remember GPO settings-there is one that could be set
in your area. Look for:
\Computer config\administrative
No additional OUs should be necessary for that.
On the GPO, remove authenticated users and add your 5 security groups instead
(so they all have read and apply group policy). Link the policy to the OU
(or OUs) where the user accounts live and it will only apply to those users in
the groups
I don't have it in front of me, but if you're on the first tab in a GPO (In
gpmc) and you add/remove SID-objects from there it will apply those perms by
default (read apply group policy). If you're on the security tab you can get
more fine-grained with your choices (be careful with denys
Targeting is a term used with GPP (group policy preferences) and it isn't
really the same for a true GPO. GPOs can only be filtered on what you've
mentioned, by location (ou), WMI queries, and/or SID-based objects like users,
computers, and groups.
I believe an LDAP query may be one of the
Agreed—my list is like what Charles has-you’re missing a lot more settings.
Where are you pulling your adm/admx templates from? Do you have a central
policy store set up? When was the last time you updated GP template files (and
have you pulled the latest ones from IE 11 WS12 R2/Win8.1)?
...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Wednesday, January 21, 2015 2:03 PM
To: 'ntsysadm@lists.myitforum.commailto:ntsysadm@lists.myitforum.com'
Subject: [NTSysADM] RE: OT Java issue.
I feel for you—we have testing coming soon too.
Just my thoughts…
Try modifying your
+1, we have one of the 5 port models with the USB ports mapped back to virtual
WS08 R2 sp1 servers running on Hyper-V (this is our 2008 R2 SP1 cluster). Ours
is probably about 4 years old now.
http://www.digi.com/products/usb/anywhereusb
-Bonnie
From:
understand - the problem occurs when you split the WNLB
cluster across two versions of Hyper-V? It works OK on 2008R2 and on 2012R2,
but not when split?
From: listsad...@lists.myitforum.commailto:listsad...@lists.myitforum.com
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent
I feel for you-we have testing coming soon too.
Just my thoughts...
Try modifying your Internet zone settings (can be done for the one user via
GPP) to make them similar to trusted. I'm not sure exactly which advanced
setting would cause this prompt, but maybe something in the scripting
I'm getting there now but have had some issues this past week and have had to
reload pages to make it work at times.
http://downforeveryoneorjustme.com/support.microsoft.com
Shows it as down.
-Bonnie
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of
Just started the process of migrating guest machines from our 2008 R2 Hyper-V
cluster to the new 2012 R2 cluster the weekend before last. Doing some legwork
on this migration as we are also migrating to some new storage and I don't
(currently) have an interim 2012 server for importing the VM
when you split the WNLB
cluster across two versions of Hyper-V? It works OK on 2008R2 and on 2012R2,
but not when split?
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Miller Bonnie L.
Sent: Tuesday, January 20, 2015 5:10 PM
To: 'ntsysadm
SFC /scannow finding anything out of sorts?
IME, not enough storage usually indicates a kernel memory issue. If seeing
it right after a restart, you may want to memtest your hardware as well.
-Bonnie
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of
Found this thread-I'm not seeing an answer here, but might give you some ideas?
The one comment that strikes me is about the page file as that could be memory
related. Maybe try removing it completely and get it to create a brand new
one? I'm assuming you've already disabled any AV software.
How are you checking space allocation, just with a right-click properties in
Explorer? Does your account have permissions all the way down the tree as an
admin and you have UAC enabled? If so, I'd suggest checking it another way as
it will only count up the files/folders you have permissions
Which version are you seeing this issue with, 7u71 or 7u72? Trying to search
to see if we're going to run into this, but all I'm finding is hits from 2013
and earlier on this error.
Thanks,
Bonnie
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of
] On Behalf Of Miller Bonnie L.
Sent: Tuesday, October 28, 2014 3:04 PM
To: ntsysadm@lists.myitforum.commailto:ntsysadm@lists.myitforum.com
Subject: [NTSysADM] RE: Windows 8 re-boots very long after latest Microsoft
updates.
Which version are you seeing this issue with, 7u71 or 7u72? Trying to search
/
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/java-installerdll-missing/42105ae3-8e22-4aa5-b4c0-56daabfcca9a
From: listsad...@lists.myitforum.commailto:listsad...@lists.myitforum.com
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Tuesday, October
Without having a backup of the original machine configuration, you may be stuck
with either discarding those snapshots, or attempting to merge the entire chain
into one new file, losing your checkpoints. Make backups of the files first,
if you haven't already.
Sharepoint Designer 2007 was what “replaced” Frontpage in Office. They aren’t
equivalent and it has quirks, but it is still free and should easily do what
you want:
http://www.microsoft.com/en-us/download/details.aspx?id=21581
Don’t try 2010 as it can only operate directly on Sharepoint sites.
If you're using loopback, you need to be applying the policy at a level in AD
where it gets the computer object, not a user. But, the policy itself should
be filtered to apply to both the computer and user.
-Bonnie
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
I know this may be a little late, but have you looked at the older GPMC Scripts
(non-PS) that are available? Not sure what OS versions you are running, but
here’s a place to start:
understand binary and those who don't.
From: listsad...@lists.myitforum.commailto:listsad...@lists.myitforum.com
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Tuesday, August 19, 2014 8:19 AM
To: ntsysadm@lists.myitforum.commailto:ntsysadm@lists.myitforum.com
Subject
FYI, for those who haven't seen it, Microsoft has pulled this August update
from WU and is recommending to uninstall if you have problems:
http://support.microsoft.com/kb/2982791
-Bonnie
What version of Windows Server?
-Original Message-
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Michael Leone
Sent: Monday, August 18, 2014 11:50 AM
To: ntsysadm@lists.myitforum.com
Subject: [NTSysADM] Clustering question - 3 node cluster
...@lists.myitforum.com] On
Behalf Of Michael Leone
Sent: Monday, August 18, 2014 12:20 PM
To: ntsysadm@lists.myitforum.com
Subject: Re: [NTSysADM] Clustering question - 3 node cluster across 2 sites,
and a quorum
On Mon, Aug 18, 2014 at 3:10 PM, Miller Bonnie L.
mille
] Clustering question - 3 node cluster across 2 sites,
and a quorum
On Mon, Aug 18, 2014 at 3:32 PM, Miller Bonnie L.
mille...@mukilteo.wednet.edumailto:mille...@mukilteo.wednet.edu wrote:
I would say no then, as Node and File Share majority means MORE than half
of the voting members need to be online
Surprisingly, I hadn't seen anything posted on here about updates yesterday,
and I was too in the thick of it to add anything just yet. I realize most are
not bleeding edge, so just a heads-up that you may have some issues-hopefully
this helps someone else and MS can sort it.
Of the servers
and just can't figure out a
trigger.
Susan Bradley
Still migrating the msmvps.com blogs but we're getting closer.
blogs.msmvps.com/bradley is the new url and redirects are in place
Have I mentioned how much migrations are REALLY painful?
On 8/14/2014 1:47 PM, Miller Bonnie L. wrote:
Thanks
FAILURE_BUCKET_ID: AV_win32k!cjComputeGLYPHSET_MSFT_UNICODE
BUCKET_ID: AV_win32k!cjComputeGLYPHSET_MSFT_UNICODE
Followup: MachineOwner
---
-Original Message-
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Miller Bonnie L.
Sent
And I thought I remembered finding a KB before-this might have something
helpful as O365 is pretty much like SP2013 for these features:
http://support.microsoft.com/kb/2629108
I remember now that the webclient service was an issue back in XP.
-B
From:
When did the old list start anyway? I subbed there in ’99 when I started here
(on recommendation by a co-worker), but don’t think my first n00b post came
along until aught-aught.
-Bonnie
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Rene de Haas
My experience with this in 2013 has been to add the new Exchange Windows
Permissions group to the user account with full control, then have the user
try to connect as quickly as possible.
The problem is on all accounts that are affected by adminsdholder, and in our
case, OUs where permission
...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Thursday, June 5, 2014 2:36 PM
To: ntsysadm@lists.myitforum.commailto:ntsysadm@lists.myitforum.com
Subject: [NTSysADM] New RODC question
We have a need to allow a cloud-based service to do lookups against our
internal AD. Their site will use
an ldap_bind_s() for this verification?
From: listsad...@lists.myitforum.commailto:listsad...@lists.myitforum.com
[mailto:listsad...@lists.myitforum.com] On Behalf Of Miller Bonnie L.
Sent: Thursday, June 5, 2014 4:36 PM
To: ntsysadm@lists.myitforum.commailto:ntsysadm@lists.myitforum.com
Subject: [NTSysADM
.
From: Miller Bonnie L.
mille...@mukilteo.wednet.edumailto:mille...@mukilteo.wednet.edu
Sender: listsad...@lists.myitforum.commailto:listsad...@lists.myitforum.com
Date: Fri, 6 Jun 2014 13:01:21 +
To:
ntsysadm@lists.myitforum.comntsysadm@lists.myitforum.commailto:ntsysadm
1 - 100 of 152 matches
Mail list logo