2012/12/3 Jevgeni Jurtsenko jevgeni...@gmail.com
Hi Arnaud,
Hi Jevgeni,
Unfortunately your patch didn't solved the problem for me.
it couldn't, since your issue is upstream to it (i.e, in kernel land)
I googled about the issue once more while setting the OS second time to
give logs
2012/11/29 Jevgeni Jurtsenko jevgeni...@gmail.com
Hello all,
Hi Jevgeni,
While repeatedly setting up the system for tests figured out the problem
in other OS subsystem driver. Problem solved with the script. Thanks again
for your time
I'm not sure to understand: do you mean that the
Hello all,
While repeatedly setting up the system for tests figured out the problem in
other OS subsystem driver. Problem solved with the script. Thanks again for
your time
On Fri, Nov 9, 2012 at 6:13 PM, Arnaud Quette aquette@gmail.com wrote:
2012/11/1 Jevgeni Jurtsenko
2012/11/1 Jevgeni Jurtsenko jevgeni...@gmail.com
Hello all,
Sorry for delay. I've been away for a while. Back to testing. I've tried
regular version 2.6.5-1 and patched. Main thing is that both versions work
until I reboot the OS, after that starting the nut fails with messages
below. To
Hello all,
Sorry for delay. I've been away for a while. Back to testing. I've tried
regular version 2.6.5-1 and patched. Main thing is that both versions work
until I reboot the OS, after that starting the nut fails with messages
below. To make it run again I've to re-plug the usb cable.
2012/9/21 Eugene Jurchenko jevgeni...@gmail.com
Massimo Gais simosagi9 at gmail.com writes:
On Sun, Aug 12, 2012 at 5:11 AM, Greg Vickers daehenoc at
iinet.net.au
wrote:
On 11/08/12 06:58, Arnaud Quette wrote:
Hi Massimo and Greg,
@Greg: if you yet returned your unit, you
Massimo Gais simosagi9 at gmail.com writes:
On Sun, Aug 12, 2012 at 5:11 AM, Greg Vickers daehenoc at iinet.net.au
wrote:
On 11/08/12 06:58, Arnaud Quette wrote:
Hi Massimo and Greg,
@Greg: if you yet returned your unit, you now have a solution ;)
I have not yet gotten rid of
2012/9/2 Greg Vickers daehe...@iinet.net.au
Hi Arnaud,
Hi Greg,
On 13/08/12 18:09, Arnaud Quette wrote:
Hey Massimo and Greg,
2012/8/12 Massimo Gais massimo.g...@iki.fi
On Sun, Aug 12, 2012 at 5:11 AM, Greg Vickers daehe...@iinet.net.auwrote:
I have not yet gotten rid of it, so
On Wed, Sep 5, 2012 at 5:58 PM, Arnaud Quette aquette@gmail.com wrote:
The only thing plugged into this UPS is the power supply for the
RaspberryPi - nut reports the load as 0.0% :) I'm going to also plug in the
5-port switch and ADSL modem/router, I expect to be online for some time
Hi Arnaud,
On 13/08/12 18:09, Arnaud Quette wrote:
Hey Massimo and Greg,
2012/8/12 Massimo Gais massimo.g...@iki.fi mailto:massimo.g...@iki.fi
On Sun, Aug 12, 2012 at 5:11 AM, Greg Vickers
daehe...@iinet.net.au mailto:daehe...@iinet.net.au wrote:
I have not yet gotten rid of
Hey Massimo and Greg,
2012/8/12 Massimo Gais massimo.g...@iki.fi
On Sun, Aug 12, 2012 at 5:11 AM, Greg Vickers daehe...@iinet.net.auwrote:
On 11/08/12 06:58, Arnaud Quette wrote:
Hi Massimo and Greg,
@Greg: if you yet returned your unit, you now have a solution ;)
I have not yet gotten
2012/8/11 Massimo Gais simosa...@gmail.com
On Fri, Aug 10, 2012 at 11:58 PM, Arnaud Quette aquette@gmail.com
wrote:
the driver runs fine. you should get a good upsc output now.
the Comm lost msg are part of code adjustments needed, but the code
already handle this fine, and recovers
Hi Massimo and Greg,
2012/8/9 Massimo Gais simosa...@gmail.com
On Wed, Aug 8, 2012 at 1:32 PM, Greg Vickers daehe...@iinet.net.au
wrote:
Fantastic Massimo, thank you! I have yet to replace my 5110, so if
there is
anything I can contribute, I will do.
It looks like the only difference
On Fri, Aug 10, 2012 at 12:22 PM, Arnaud Quette aquette@gmail.com wrote:
Hi Massimo and Greg,
Hello Arnaud,
instead of
receiving the whole 171 bytes transfer in one single gulp.
thus, the data of the 2nd sequence is missing (after 3b ab 01):
28 82 c0 01 00 02 00 00 80 0f 00 00 00
Hello Arnaud,
thanks for the effort for the patch!
I took most of this afternoon looking at this issue, and this should be
fixed with the attached patch
It applies fine on 2.6.5, using the following command:
# cd nut-2.6.5
# patch -p0 /path/to/xcp-rcv-loop.diff
# make
I've tested it on
Hi Massimo and Greg,
@Greg: if you yet returned your unit, you now have a solution ;)
thanks for the effort for the patch!
welcome ;)
I took most of this afternoon looking at this issue, and this should be
fixed with the attached patch
It applies fine on 2.6.5, using the following
On 08/08/12 20:19, Massimo Gais wrote:
I have the same issue with Raspberry Pi (running 'raspbian') and
Powerware 5110, and I'd like to help to solve it, as I don't have the
priviledge to replace UPS :-). I'm moving my nut server from an old
NSLU2 with debian squeeze (where it was working
Hi Arnaud,
On 31/07/12 01:02, Arnaud Quette wrote:
Hi Greg,
2012/7/29 Greg Vickers daehe...@iinet.net.au
mailto:daehe...@iinet.net.au
On 22/07/12 20:14, Greg Vickers wrote:
Hi Arnaud,
On 18/07/12 20:59, Arnaud Quette wrote:
I've just made a quick test on
2012/8/1 Greg Vickers daehe...@iinet.net.au
Hi Arnaud,
Hi Greg,
On 31/07/12 01:02, Arnaud Quette wrote:
Hi Greg,
2012/7/29 Greg Vickers daehe...@iinet.net.au
On 22/07/12 20:14, Greg Vickers wrote:
Hi Arnaud,
On 18/07/12 20:59, Arnaud Quette wrote:
I've just made a quick test on
Hi Greg,
2012/7/29 Greg Vickers daehe...@iinet.net.au
On 22/07/12 20:14, Greg Vickers wrote:
Hi Arnaud,
On 18/07/12 20:59, Arnaud Quette wrote:
I've just made a quick test on an Opengear ACM 50004-2 (ARM supervision
appliance).
For the record:
- uname -a: Linux acm5004-2 2.6.30.2-uc0
On 22/07/12 20:14, Greg Vickers wrote:
Hi Arnaud,
On 18/07/12 20:59, Arnaud Quette wrote:
I've just made a quick test on an Opengear ACM 50004-2 (ARM
supervision appliance).
For the record:
- uname -a: Linux acm5004-2 2.6.30.2-uc0 #1 Tue Feb 15 09:30:54 EST
2011 armv4tl unknown
- nut
Hi Arnaud,
On 18/07/12 20:59, Arnaud Quette wrote:
I've just made a quick test on an Opengear ACM 50004-2 (ARM
supervision appliance).
For the record:
- uname -a: Linux acm5004-2 2.6.30.2-uc0 #1 Tue Feb 15 09:30:54 EST
2011 armv4tl unknown
- nut version: 2.4.3 (so bcmxcp_usb 0.23)
- tried
2012/7/13 Greg Vickers daehe...@iinet.net.au
Hi,
Hi Greg,
I have set up a RaspberryPi computer to do monitoring of two UPSs. One is
an MGE evolution 800, one is an Eaton Powerware 5110. The MGE was being
monitored by another Linux (Ubuntu 12.04) computer, and I just copied and
pasted in
On 13/07/12 22:24, Charles Lepple wrote:
On Jul 13, 2012, at 12:41 AM, Greg Vickers wrote:
0.238682get_answer: (128 bytes) = ab 01 79 01 02 50 00 50 01 00 0e 00
01 00 10 50
0.239445 4f 57 45 52 57 41 52 45 20 55 50 53 20 20 20 5c 00 00 00 00 00
00 00 00 00
0.240107 00 00
söndagen den 15 juli 2012 16.59.56 skrev Greg Vickers:
Hi Greg,
On 13/07/12 22:24, Charles Lepple wrote:
On Jul 13, 2012, at 12:41 AM, Greg Vickers wrote:
0.238682get_answer: (128 bytes) = ab 01 79 01 02 50 00 50 01 00
0e 00 01 00 10 50 0.239445 4f 57 45 52 57 41 52 45 20
On Jul 13, 2012, at 12:41 AM, Greg Vickers wrote:
0.238682get_answer: (128 bytes) = ab 01 79 01 02 50 00 50 01 00 0e 00
01 00 10 50
0.239445 4f 57 45 52 57 41 52 45 20 55 50 53 20 20 20 5c 00 00 00 00 00
00 00 00 00
0.240107 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
26 matches
Mail list logo
