FFT and after IFFT, and normalize. Pd's FFT
routines assume x[0] at the start of the filter kernel, not at the
center, so you have to rotate your zero phase filter kernel before
taking it's Fourier Transform.
Katja
On Mon, May 5, 2014 at 8:49 PM, david medine dmed...@ucsd.edu wrote:
For the FFT
this way, but
oh how annoying it is to not understand your own patches.
Katja
On Wed, Apr 30, 2014 at 12:49 AM, Simon Iten itensi...@gmail.com wrote:
hi katja,
i tried your patch and had a look at it. it’s beautifully programmed :-) so
skilled.
thanks for taking the time and it’s very interesting
samples delay for [rpole~]. You get the integrator's maximum
everytime. See attached patch.
Of course it still counts integer number of samples. Upsampling would
indeed improve accuracy. An upsampled signal needs filtering to remove
spectral images, did you try that?
Katja
On Tue, Apr 29, 2014 at 8
. Are you
planning to control filter cut off frequency with the pitch detection
result? Did you already try that? I wonder how that could work at all,
because the pitch result comes only after the adaptive filter.
Katja
On Tue, Apr 29, 2014 at 3:44 PM, Simon Iten itensi...@gmail.com wrote:
Katja
or singing the lowest notes in the range.
Katja
On Tue, Apr 29, 2014 at 7:58 PM, Simon Iten itensi...@gmail.com wrote:
katja,
exactly! i filter the input based on the output of the pitch detection. i
used this for quite some time with my doublebass (but with a pickup per
string) and it works
In short, the pd-double project is in coma because it was too
ambitious for the available workforce. If it is to be reanimated, it
would be better to develop a set of patch files for pd core and test
extensively on all platforms where pd can run, before touching on
externals.
Katja
On Sat, Mar
with Jack.
Katja
On Tue, Feb 25, 2014 at 9:33 PM, Pierre Massat pimas...@gmail.com wrote:
I just checked again and to to sum up I have three problems :
- errors with JACK (and instability),
- X crashes sometimes when typing stuff in an object box,
- and Alsa throwing this error in the console
to 1024 points in one last step.
Attached patch cubic_upsampling.pd shows the interpolation steps done
on a sequence of random numbers.
Katja
#N canvas 143 79 708 617 10;
#N canvas 328 438 667 277 stretch 0;
#X obj 17 178 tabread4 \$0-ampsettings;
#X obj 17 205 tabwrite \$0-stretched-settings;
#X
float type definition.
Katja
On Tue, Feb 11, 2014 at 6:39 AM, Miller Puckette m...@ucsd.edu wrote:
Hi Katya -
I think there's no simpler way. On the other hand, for constants like
0.125 and 2, it would be equivalent to say 0.125f, etc - but for other
constants (1/3 for example), casting
. For single precision
t_float, '(t_float)0.125' is equivalent to '0.125f'. I can't think of a
disadvantage, but let me know if I overlooked something.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info
Media Open Network Stream tab Network
- paste link in the network URL field and click Play
Or alternatively, there's: http://www.youtube.com/watch?v=giJ-Ss6QRJo
Katja
On Fri, Nov 22, 2013 at 9:10 PM, Julian Brooks jbee...@gmail.com wrote:
Hey Katja,
Good to hear.
Are you back now?
Very
Julian, there's ton's of California Pd weekend video material
(presentations, discussions, workshops, live performance) but it must be
viewed, edited, compressed etcetera. I would expect that it will be
available at newblankets.org in a while.
Katja
On Fri, Nov 22, 2013 at 10:15 AM, Julian
Hi Mario,
Did you try [zexy/limiter~]? It's not so CPU-intensive. Isn't that what you
want: only attenuate the sounds which exceed a limit, and leave the rest
untouched?
Katja
On Tue, Oct 1, 2013 at 4:30 PM, Mario Mey mario...@gmail.com wrote:
How does Pd or the soundcard outputs the signal
unused
options as possible in the ALSA mixer, in particular 'IEC958 Default PCM'
(don't know if you have that option). That used to make the difference
every time though I still don't know why.
Katja
On Sun, Sep 22, 2013 at 9:00 PM, Chris Clepper cgclep...@gmail.com wrote:
I've got a Wandboard
structure. Let's not conclude too early that the makefiles
are at fault.
Katja
On Mon, Sep 9, 2013 at 6:29 PM, jo57 jaime.oliv...@gmail.com wrote:
I don't think it is clutter at all… I don't have one of these boards, but
I'd love to try them, and when I do, I'd love to come back to this
documentation
?
Katja
On Mon, Sep 9, 2013 at 2:06 PM, Ali Momeni batc...@gmail.com wrote:
hello all,
i'm working with a Udoo board (http://Udoo.org)
i've successfully compiled PureData 0.45 from miller's site;
i'm now trying to compile some of the externals in the pd svn, but i'm
getting the same error for all
home-brew externals and some externals from Pd-extended on
RPi and PengPod amongst others. If it would build on Udoo too, we'd
know a bit more.
Katja
On Mon, Sep 9, 2013 at 4:11 PM, Ali Momeni batc...@gmail.com wrote:
Hello,
Looks like the Udoo is the same as the PengPod.
Is the PengPod
with
'Segmentation fault (core dumped)'.
Katja
On Sun, Aug 18, 2013 at 3:51 AM, Miller Puckette m...@ucsd.edu wrote:
Hi all,
Pd 0.45-0test1 is now up on http://crca.ucsd.edu/~msp/software.htm
or via git from sourceforge:
git clone git://pure-data.git.sourceforge.net/gitroot/pure-data/pure-data
git
, [cyclone/bitxor~]
amongst them. They can operate on floats as raw bit sequences, or
convert the floats to integers first.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
bought them from Digikey but it seems they're out of
stock now, obsolete they say! They can still be found from other sources.
Katja
On Sun, Aug 11, 2013 at 4:37 AM, Mario Mey mario...@gmail.com wrote:
Brian: I comment between lines:
El 09/08/13 09:42, Brian Fay escribió
latency. I got a LinexFM transmitter from
here:
http://www.linexfm.nl/
Rumors go that USA versions have higher transmission power than the ones
sold in Europe.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http
Yeah, sending FUDI would be good. Or OSC. In case of synthesis, better send
controller data instead of audio.
In my case (sending processed acoustic audio input) that wouldn't work, but
never mind.
Katja
On Fri, Apr 26, 2013 at 10:36 PM, Phil Stone pkst...@ucdavis.edu wrote:
That's a fairly
greatest from nightly builds every now and then, so you have recent
fixes.
Katja
On Mon, Apr 1, 2013 at 7:45 PM, Jm Jones juan...@gmail.com wrote:
ok! so I will install PD 64 in my windows machine algo
2013/4/1 András Murányi muran...@gmail.com:
Howdy,
another 64-bit guy here. My advice
.
Katja
On 3/15/13, chris clepper cgclep...@gmail.com wrote:
List
I rediscovered the presentation from the Weimar PdCon from Urban Schlemmer
on reverb design in Pd. The appendices list a set of abstractions and
objects from Schlemmer and others, but I have not found an online source
occur, and what
can be done to eliminate or prevent them.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
Hello, there is still something wrong with the links to Pd-E for Squeeze
i386. About 0.44 from 'latest' or nightly builds, gdebi says 'wrong
architecture, amd64'.
Katja
On Sun, Feb 10, 2013 at 9:49 PM, João Pais jmmmp...@googlemail.com wrote:
Ok. Btw, the version I just installed from
Seems that the Jan 29 2012 build (Pd-E 0.43.4) is the latest which can be
installed on Squeeze i386, newer ones for Squeeze i386 are actually amd64
according to gdebi (though I did not try 'm all of course).
Katja
On Mon, Mar 11, 2013 at 11:38 AM, katja katjavet...@gmail.com wrote:
Hello
difference? You would get playback speeds like 1.001 or 0.999,
perfectly acceptable for my purpose at least. This would greatly
simplify the task of resampling.
Katja
On 3/5/13, Charles Goyard c...@fsck.fr wrote:
Hi,
see if netjack fills the bill :
Netjack is a Realtime Audio Transport over
:
https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-WIFI/
Otherwise, I would just be happy to have learned about ad hoc networks.
This can come in handy for other purposes too, for example when synching Pd
computers.
Katja
On Fri, Mar 1, 2013 at 9:34 PM, Phil Stone pkst...@ucdavis.edu
Hi Chris, thanks for your advice. You're right, Chinese manufacturers are
generally not supportive to open source, which is a pity as they are
designing and producing most of the hardware today.
Katja
On Tue, Mar 5, 2013 at 6:43 AM, chris clepper cgclep...@gmail.com wrote:
On Mon, Mar 4, 2013
latency it could be perfect for wireless
Pd.
Katja
On Fri, Mar 1, 2013 at 11:41 AM, Antoine Villeret
antoine.ville...@gmail.com wrote:
hello,
those are good for what they have been designed for and it depends on what
you mean by exellent sound quality
I've made few tests on those few years
Thanks for the links, Rich. The Tranz system comes close, with their stereo
channels. It's a pity they don't have a body pack. Oddly, the manufacturer
doesn't supply any technical specs for these devices.
Katja
On Fri, Mar 1, 2013 at 1:08 PM, richard duckworth
richduckwo...@yahoo.comwrote
Found more info about TI's PurePath wireless. Latency of wireless
transmission is 768 samples minimum. Added to this must be the latencies of
ad/da conversion.
http://e2e.ti.com/support/low_power_rf/f/382/t/110331.aspx
Forget about it, this concept is only useful for home entertainment.
Katja
receiving Pd audio and converting it to analog. Together the
receiving device could be the size of a weight-watcher's lunch box, while
at the transmitter side the computer's built-in stuff is used. Maybe I'm a
bit naive here, anyway I'll report results from experiments.
Katja
On Fri, Mar 1, 2013 at 2:14
method in practice, to send audio from
Pd without wires?
Thanks,
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
took the opportunity to upgrade some
effects and overall sound quality.
Get SliceJockey2test2.zip from my page:
http://www.katjaas.nl/slicejockey/slicejockey.html
Please do not hesitate to report bugs if you find any.
Katja
___
Pd-list@iem.at mailing
was planning to do
my own state variable filter anyway, but it would be nice to have a
working [cyclone/svf~] as well. Check the object with attached patch
if you can. To be specific, I have the issue with Pd-E 0.43.4 for
Debian Squeeze amd64 from nightly builds. The i386 build is not
affected.
Katja
#N
~]. Not at first sight however.
Katja
On 2/26/13, Hans-Christoph Steiner h...@at.or.at wrote:
I, for one, am very happy that you post on denormal issues! Its great to
have
these hard technical details worked out so that they don't trip us up in
future works :)
On my Linux Mint Maya 64-bit
for some reason.
Katja
On Thu, Feb 21, 2013 at 5:58 PM, Funs Seelen funssee...@gmail.com wrote:
Hi list,
Sorry for being a little off topic, but I hope to find a solution here.
After spending many many hours trying to get the sound on my new
machine working I feel I'm getting close, but need
Jonathan, if you do ./configure with option --prefix=absolute path to root
dir of that Pd distribution, you can do a local install without su
privileges. This doesn't solve the issue with updating but anyway it's
convenient.
Katja
On Wed, Feb 20, 2013 at 11:47 PM, Jonathan Wilkes jancs
Hi, Pandora is ARM Cortex-A8, that's little endian right? What does
portaudio's generated makefile say? I compiled Pd for RPi (ARMv6) and there
is (correctly) '-DPA_LITTLE_ENDIAN' among the CFLAGS in portaudio's
makefile.
Katja
On Thu, Feb 14, 2013 at 11:53 AM, dreamer drea...@puikheid.nl
for an application like this.
Anyway it's great they have put your project on RPi blog. You will be
famous, Pi Massat! Congrats again.
Katja
On Fri, Feb 8, 2013 at 10:51 AM, Pierre Massat pimas...@gmail.com wrote:
Dear all,
Please read below the message I received from Eben Upton, the boss
beginners.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
the full text of /boot/cmdline.txt for me, if you
have keyboard working with lowered USB speed? (I'm not talking about
good audio yet).
Thanks,
Katja
On Sat, Jan 26, 2013 at 8:54 PM, Thomas Grill g...@g.org wrote:
Message to self: it seems that one has to wait for updated RPi USB
firmware
improve things
further.
Katja
On Sun, Jan 27, 2013 at 2:33 PM, Cyrille Henry c...@chnry.net wrote:
i put it in front of everything :
dwc_otg.speed=1 dwc_otg.lpm_enable=0 console=ttyAMA0,115200
kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4
elevator=deadline rootwait
Congratulations Pierre! You're Guitar Extended concept is really great.
cheers,
Katja
On Sun, Jan 27, 2013 at 5:00 PM, Pierre Massat pimas...@gmail.com wrote:
http://www.youtube.com/watch?v=NwJNeouLqgQfeature=youtu.be
Dear all,
It's working !!! :)
It looks like a revolution to me
Both are already mentioned but I'd like to confirm that these do work
on RPi (provided the USB speed is lowered as described in this
thread): iMic and Behringer UCA202.
Katja
On Sun, Jan 27, 2013 at 5:51 PM, Miller Puckette m...@ucsd.edu wrote:
I heard suggestions on the Pi sites (I forget
libportaudio2 via Synaptic,
'normalized' Pd would finally start.
It is no problem to have the regular Pd still installed. Maybe you can
install the local Pd over the regular Pd using the gnumakefile. Didn't
try that, I don't like to install things without package manager.
Katja
On Fri, Jan 25, 2013 at 3:41
Sorry that must be my fault, archived it with default options. I'll
have a look into that and let you know when a better .tar is uploaded.
Katja
On Fri, Jan 25, 2013 at 4:53 PM, Julian Brooks jbee...@gmail.com wrote:
Hi Katja,
Thanks for this.
When I cd into bin then ./pd I get 'permission
line with the full path to
pd-0.44-0-normalized/bin/pd. It's not a .deb, so it can't be installed
under supervision of package manager.
Katja
On Wed, Jan 23, 2013 at 9:15 PM, Julian Brooks jbee...@gmail.com wrote:
Hey Katja,
Would you mind sharing the 'normalised' Pd-0.44.0 for RPi please
On Wed, Jan 23, 2013 at 8:00 PM, padawa...@obiwannabe.co.uk
padawa...@obiwannabe.co.uk wrote:
On 23 January 2013 at 18:23 katja katjavet...@gmail.com wrote:
Now I recompiled the Pd-0.44.0 release on Raspberry Pi (took me a few
hours, not only because Pi is so slow)
Have you looked into cross
. With the 'normalized' Pd, nothing special happens.
And indeed, the PD_BIGORSMALL conditional checks come for free: with
initial settings of the chaosmonster1, performance is equivalent in
both Pd's. Cool! Hopefully this is similar on armv7.
Katja
On Wed, Jan 23, 2013 at 5:01 PM, Hans-Christoph Steiner h
confusing for the user to sort it out. I'm going
to try recompile Pd with PD_BIGORSMALL checks enabled, and see what it
means for the normal performance of the filter objects.
Katja
On Mon, Jan 21, 2013 at 4:24 PM, Pierre Massat pimas...@gmail.com wrote:
Hi Katja, thank you for your reply! It is now
), denormals are still there. I'm literally out of options for
the moment. Sorry for not having better news.
Katja
On Sun, Jan 20, 2013 at 9:51 PM, Miller Puckette m...@ucsd.edu wrote:
OK.. but try the 0.44 build on my site - the one from Raspian is quite old :)
M
On Sun, Jan 20, 2013 at 09:28:30PM
processors, but this implements a lot of
conditional checks and it means performance loss for many objects. For
current Intel computers the extra load is not so much of a problem,
but for poor Raspberry Pi one would rather like to save a few
instructions, instead of adding more.
Katja
On Sun, Jan 20
checks are rather expensive for RPi, that's
what I've found.
Katja
On Sun, Jan 20, 2013 at 8:24 PM, Miller Puckette m...@ucsd.edu wrote:
Hi all...
I think it's possible to get flush-to-zero behavior on the Pi (ARMv6) by
calling gcc with --fast-math. At any rate what I found was that, if I
a maximum of 8 single precision floats
in parallel, but Raspberry Pi doesn't show a sign that it profits from
data alignment, at least not when code is compiled with gcc.
Katja
On Sun, Jan 20, 2013 at 5:12 PM, Hans-Christoph Steiner h...@at.or.at wrote:
I think this is what you want, from 'man
blocks are ok, but
they come from the wrong outlets. I swap these within the object. It
is less operations than copying left and right inputs to outputs, but
still a waste.
Katja
On Sun, Jan 13, 2013 at 3:49 AM, Hans-Christoph Steiner h...@at.or.at wrote:
Yeah, that makes sense. With all
Function copy_perform8() is also eligible for SIMD processing. I used
memcpy() because it is straightforward to use, while Pd's functions
pointed to the wrong locations for this case. On the reverb's total
load there is no significant performance difference.
Katja
On Sat, Jan 12, 2013 at 1:00
float precision conversions. Throughout
Pd there are many untyped float defines and literal constants which
default to double, and I have introduced more when making libs
double-ready. Not good. I'll come back to this in another thread.
Katja
On Sat, Jan 12, 2013 at 8:14 PM, Hans-Christoph Steiner h
in one object?
Thanks,
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
Hi Miller,
Thanks for the solution. The routines are in place so copying the
right channel input to output should do it. Is there any reason to
prefer copy_perform() over memcpy()? I'm trying to make the most
efficient reverb for RPi Co.
Katja
On Fri, Jan 11, 2013 at 7:57 PM, Miller Puckette
Ok so I did the ugly thing with the right channel input and output pointers:
memcpy(outR, inR, vectorsize * sizeof(t_float));
inR = outR;
Works like a charm, thanks again.
Katja
On Fri, Jan 11, 2013 at 10:05 PM, Miller Puckette m...@ucsd.edu wrote:
copy_perform assumes the data is 4-byte
, but this seems less related to the issue.
Katja
On Wed, Jan 9, 2013 at 1:02 AM, Hans-Christoph Steiner h...@at.or.at wrote:
Ah, that's an important tidbit of info! If that's not in the bug report,
please include which version is working.
.hc
On 01/08/2013 06:53 PM, Zack Settel wrote
for sample-precise throughput latency
measurement.
Katja
There is now a Debian source package as part of the nightly builds, so it
should be much easier to build Pd-extended on Debian these days. After
downloading the two tarballs:
http://autobuild.puredata.info/auto-build/latest/Pd
Hans, thanks for pointing to possible solutions for this bug. I'm
still working on a 0.42 / 0.43 compatible SliceJockey. A first test
version should be ready very soon.
Katja
On Thu, Dec 20, 2012 at 3:30 AM, Hans-Christoph Steiner h...@at.or.at wrote:
I'm using SliceJockey as a test patch
from Pd? Is a real
time kernel for ARMv7 available at all?
Thanks, Katja
7 tablets with allwinner a10 cost about 70 usd on ebay.
I have been playing with a cubieboard a lot this last week (
http://cubieboard.org/ ) and although its not a holy grail, its a really
nice toy.
--
buZz
Cool, with [nbuntil] the workload is even spread over the cores! So
now you can do calculations on long arrays without fear of CPU spikes.
And in turn, audio latency may be set to lower level. Great solution
Roman, thanks for sharing.
Katja
On Sun, Dec 16, 2012 at 10:51 PM, Roman Haefeli reduz
On Mon, Dec 17, 2012 at 1:21 PM, Roman Haefeli reduz...@gmail.com wrote:
...
On Mon, 2012-12-17 at 11:56 +0100, katja wrote:
Cool, with [nbuntil] the workload is even spread over the cores!
I don't think that [nbuntil] will help in making Pd use more than one
core. Since [nbuntil] is just
On Mon, Dec 17, 2012 at 4:18 PM, katja katjavet...@gmail.com wrote:
On Mon, Dec 17, 2012 at 1:21 PM, Roman Haefeli reduz...@gmail.com wrote:
...
On Mon, 2012-12-17 at 11:56 +0100, katja wrote:
Cool, with [nbuntil] the workload is even spread over the cores!
I don't think that [nbuntil
atmospheric pressure at certain height) and sensor noise frequencies.
And you want to see results with accuracy and little delay. In fact it
needs a very sharp minimum-phase filter. Maybe a median filter can
'preprocess' the signal in some way. Anyway it gives a new
perspective.
Katja
On Fri, Dec 14
):
https://github.com/lebipbip/le-BipBip
Katja
On Wed, Dec 12, 2012 at 4:37 AM, patrick pured...@11h11.com wrote:
hi,
i was trying to implement this filter in an avr, but i guess it would be
even better in pd. i just need to clean a noisy accelerometer (only 1 axis),
but then i read
denormals, this could probably be replaced by
the PD_BIGORSMALL(). I'll check that.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
don't have a Pd autobuild or SVN setup on my Linux box now, can't
test a modification rightaway. Anyhow, I guess the problem is now
identified. I am sorry about my blunt subject title 'what makes Pd
0.43 so CPU hungry?'. It wasn't even about Pd, but Pd-extended.
Katja
like the 'apt-get-for-Pd-' idea, where external libs could live
decentralized in various repos. This would give developers more autonomy
and a clearer responsability over their libs.
Katja
On Sat, Dec 8, 2012 at 2:09 AM, Hans-Christoph Steiner h...@at.or.atwrote:
Miller introduced those
' platforms.
And the disadvantage that I have to build on all platforms. This poses
a natural limit on my ambitions to publish new projects. Maybe not so
bad after all...
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http
optimization flags as well. Are they somehow conflicting,
producing an undefined result? Not for OSX, apparently. But for debian
something goes wrong. The build system stuff is really over my head,
hopefully someone else has better overview to find the exact cause.
Katja
On 5/6/12, Jamie Bullock
, using
Skype or similar, and route audio to Pd with Jack or Soundflower.
Katja
On Mon, Oct 29, 2012 at 4:21 AM, Sebastian Valenzuela
svalenzuelamu...@gmail.com wrote:
Hey everyone,
I know this is a longshot, and most likely not the best place to ask this
sort of question, but maybe you can
. Batteries of both are dead now after a
few years.
Katja
On Mon, Oct 29, 2012 at 4:13 PM, Sebastian Valenzuela
svalenzuelamu...@gmail.com wrote:
Hi Katja,
Thank you for your reply. I did find a way to SEND audio to my phone via a
wifi connection. A mac application called Airfoil allowed me
On Tue, Oct 2, 2012 at 5:05 PM, Aaron Thompson
aaron.thomp...@live.co.uk wrote:
Hi Katja,
Thanks for the reply. That seems to have fixed the problem, thanks!
With regards to using the FIR as a fractional delay filter, i'm assuming the
delta float (which feeds to the coefficient calculations
of the code should not give me
too much trouble. There's also a graphics class in the package, that's
not for me. It would be great if the port can be a collaboration
effort, HISSTools is quite an elaborate project.
Katja
On Thu, Sep 27, 2012 at 3:11 PM, Julian Brooks jbee...@gmail.com wrote
to be beta-tester?
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
.
Katja
On Mon, Jul 16, 2012 at 1:26 PM, Julian Brooks jbee...@gmail.com wrote:
Hey all,
Spoke to P.A. who has asked for any interested party to contact him
directly for the source code.
p.a.tremb...@hud.ac.uk
Cheers,
Julian
___
Pd-list
Julian, it is a good idea to first ask P.A. to share the code among a
small group and discuss licence, naming and maintainance matters. I am
still not back home (this mail is typed from a tourist office), but in
one week I will be ready to join in fully.
cheers, Katja
On 6/28/12, Julian Brooks
difficult. I'd
love to give it a try soon but coming weeks I'll be on a computerless
holiday. Anyway I'll try to follow the discussion in the meantime.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info
to an implementation of [tabwrite4~].
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
in my tent, Pd addict I am).
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
been talking
about, but the asymmetry with the names of other objects gives me
pause.
Yeah [poke4~] is apt for a 4 point interpolating signal write object
with index control.
OK, onto the next flight!
Have a good trip!
Katja
___
Pd-list@iem.at
for a new focus on
[tabwrite4~], [vtabwrite~] or whatever it's name could be.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
with a read object, and
I have not worked that out either. Suggestions or comments are
appreciated.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
Ha, finally a detailed discussion on this topic, I like it. My replies
are inlined.
On Wed, Jun 13, 2012 at 10:27 PM, Matt Barber brbrof...@gmail.com wrote:
Hi, I've been going through the vdelayxw code myself. See comments:
On Wed, Jun 13, 2012 at 12:30 PM, katja katjavet...@gmail.com wrote
Alexandre if he is willing to release the code so it can be ported to
Pd?
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
me a kernel
failure soon as I start sampling. Does anyone know of a fine
performance profiler for GNU/Linux?
Katja
On 5/4/12, Hans-Christoph Steiner h...@at.or.at wrote:
I honestly don't know the cause, and haven't really checked on numbers. I
mostly work on my four year old laptop, and test
. But there is no literal bitmask
defined, only a scaling. Not sure if this type punning gives a
problem.
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
On Fri, May 4, 2012 at 10:26 AM, katja katjavet...@gmail.com wrote:
On Fri, May 4, 2012 at 5:14 AM, Hans-Christoph Steiner h...@at.or.at wrote:
Does it does type-punning? Does compilation give warnings about that?
That's my guess.
[blosc~] does type punning indeed, it uses type unsigned
with Tk 8.5's antialiased font! Initially, I feared
that antialiasing was responsible for increased load on Debian, but
disabling GUI updates did not make noticeable difference. It seems
that antialiasing is done rather efficiently, the performance drop
must be somewhere else.
Katja
Great audiovisual composition. One could also spend days or weeks
learning advanced Pd techniques from it. A typical Jonathan Wilkes
patch, I would say.
Katja
On Wed, May 2, 2012 at 7:50 PM, Jonathan Wilkes jancs...@yahoo.com wrote:
Yeah, my default screen-video-capture tool doesn't capture
a lot of
experimentation. Also, the result may be different for each (mic)
preamp because input impedance is not fully standardized.
Katja
On Sat, Apr 21, 2012 at 12:12 AM, Matteo Sisti Sette
matteosistise...@gmail.com wrote:
Hi,
This is OT but I'm sure many of you have used piezo microphones
. However, numbers
should not be printed with more characters than originally typed in
the box. If you'd type 4294967297 it would be converted to 4294967296
(in single precision case). But if you typed 0.01, Pd should not print
0.00977648.
Katja
On Wed, Apr 11, 2012 at 10:01 PM, Miller
/ signals. And how about sending over UDP
or TCP?
Katja
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
1 - 100 of 168 matches
Mail list logo