For hod-dipped galv U-bolts, Rohn always had a good selection. I don't know
if I've ordered any since Radian took over. Pirod/Valmont also used to have
a good selection of hardware, though I found that a lot of what they had
wasn't always in their catalog or on the web site.
For stainless, if
I wonder if they are metric rather than standard sized u-bolts? This might
account for the difference in size...
Mark - N9WYS
-Original Message-
From: Repeater-Builder@yahoogroups.com On Behalf Of Chuck Kelsey
The application is a small side-arm bracket. I made it from aluminum square
Tessco, Talley Hutton. My preference would be Talley since there prices
seem to a bit less than Tessco, however Tessco will most likely have what
you need in stock. There is a reason they are a bit more than the others.
When you carry that many lines it costs a bit to keep that inventory in
Chuck,
I buy all of my antenna-mounting hardware from either Tessco or
McMaster-Carr, and I'm seldom disappointed. What, exactly, do you want?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Chuck Kelsey
Sent:
-
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, November 02, 2008 9:49 AM
Subject: RE: [Repeater-Builder] Antenna Hardware
Chuck,
I buy all of my antenna-mounting hardware from either Tessco or
McMaster-Carr, and I'm seldom disappointed. What, exactly, do
: Mike Mullarkey
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, November 02, 2008 9:45 AM
Subject: RE: [Repeater-Builder] Antenna Hardware
Tessco, Talley Hutton. My preference would be Talley since there prices
seem to a bit less than Tessco, however Tessco will most likely have what
you need
] On Behalf Of Chuck Kelsey
Sent: Sunday, November 02, 2008 6:55 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Antenna Hardware
For this particular application I was looking for:
Stainless u-bolt
Pipe size 1.25 (1.75 OD)
5/16 thread size
Minimum 3.25 length
I just looked
my question of a decent supplier... if one really exists.
Chuck
WB2EDV
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, November 02, 2008 10:20 AM
Subject: RE: [Repeater-Builder] Antenna Hardware
Chuck,
The McMaster-Carr
, November 02, 2008 10:42 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Antenna Hardware
The application is a small side-arm bracket. I made it from aluminum square
tubing. It got removed from the tower and I needed U-bolts for different
project so I borrowed them. Now
)
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, November 02, 2008 12:33 PM
Subject: RE: [Repeater-Builder] Antenna Hardware
Dunno about stainless steel U-Bolts, but our local Ace Hardware carries a
large variety of 'strange' stuff.
And, picking up the phone will save you time and money.
73,
WM4B
-
From: Mike Besemer (WM4B)
To: Repeater-Builder@yahoogroups.com
mailto:Repeater-Builder%40yahoogroups.com
Sent: Sunday, November 02, 2008 12:33 PM
Subject: RE: [Repeater-Builder] Antenna Hardware
Dunno about stainless steel U-Bolts, but our local Ace Hardware carries a
large variety
I don't think you are, Chuck. Or else we're having the same dream weird.
I've never been satisfied with any U-bolt selection I've ever seen either.
And a lot of the time, they don't come with saddle clamps either; just a
flat plate which is not usually any good for mast/tubing applications.
At 05:50 11/2/2008, Chuck Kelsey wrote:
Does anyone have a GOOD source for stainless U-Bolts
http://www.boltdepot.com/product.aspx?cc=46cs=191cm=6cd=48
Yahoo! Groups Links
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
At 05:50 11/2/2008, Chuck Kelsey wrote:
Does anyone have a GOOD source for stainless U-Bolts
http://www.boltdepot.com/product.aspx?cc=46cs=191cm=6cd=48
Yahoo! Groups Links
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
; Repeater-Builder@yahoogroups.com
Sent: Sunday, November 02, 2008 3:16 PM
Subject: Re: [Repeater-Builder] Antenna Hardware
At 05:50 11/2/2008, Chuck Kelsey wrote:
Does anyone have a GOOD source for stainless U-Bolts
http://www.boltdepot.com/product.aspx?cc=46cs=191cm=6cd=48
it U-Bolt Wire Rope Clip which is a u-bolt guy wire clamp.
Price - $80.91 ea.
What can I say
Chuck
WB2EDV
- Original Message -
From: Mike Besemer (WM4B)
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, November 02, 2008 12:33 PM
Subject: RE: [Repeater-Builder] Antenna Hardware
16 matches
Mail list logo
