As they are standard 34-pin floppy devices they do still need a controller
board to work with the SAM Coupe.
I’ve build a few customised versions of my disk drive controller board with
longer cables to accommodate these in the past for people. There’s photos of
one in the ‘SAM Projects’
You could probably also consider switching to a HxC Floppy emulator (that has
been shown to work with the Sam Coupe), or the cheaper Gotek drive (or clone
such as the flopper interface - http://www.sellmyretro.com/offer/details/10973
Just a different way of accessing software...
Rich
Always worth bearing in mind that the Citizen disk drives used by MGT/SAMCo
were made around 1989-1991 or thereabouts, they were discontinued very early in
SAM’s life so are getting on for over 25 years old! The belts will be perishing
quite a bit and becoming slack, unfortunately I’ve not been
Always worth bearing in mind that the Citizen disk drives used by MGT/SAMCo
were made around 1989-1991 or thereabouts, they were discontinued very early in
SAM’s life so are getting on for over 25 years old! The belts will be perishing
quite a bit and becoming slack, unfortunately I’ve not been
Thanks for the endorsement. 20 odd years of doing stuff, and still going – with
a few announcements soon about some new stuff that I’m tinkering away on. Next
up will be SAM Revival issue 26… then after that some hardware…
(Who’s not got SAM Revival issue 25 yet? It’s up on eBay with £1 off
Yes, I’ve buyed two for mine too from Colin and all works well.
Very professional guy, a MUST in Sam Coupè world ;)
Kora Sistemi Informatici
Via Cavour 1, 46030 San Giorgio di Mantova MN
Tel/Fax +39 0376 371059
P. IVA: 02048930206
Da: owner-sam-us...@nvg.ntnu.no
Benvenuto Paolo,
On 23 May 2016 at 08:53, Paolo Borzini wrote:
> Hello,
> I've a problem with the floppy drive of my sam coupe.
> Typing BOOT or some other command for disk gives me this error "55 Missing
> disk, 0: 1".
> But on manual the errors list ranging from 1 to
Is it the original Citizen drive? If so, I wouldn´t be surprised at all by a
worn out/torn belt.
Stefan
From: owner-sam-us...@nvg.ntnu.no [mailto:owner-sam-us...@nvg.ntnu.no] On
Behalf Of david brant
Sent: Monday, May 23, 2016 12:34 PM
To: sam-users@nvg.ntnu.no
Subject: Re: Floppy disk drive
The Drive belt could be worn out.
David
On 23 May 2016, at 10:28, Paolo Borzini wrote:
> Yes,
> the drive heads are cleaned.
>
> Any other hints?
>
> Paolo
>
> Il 23/05/16 09:32, Rich Mellor ha scritto:
>> On 23/05/2016 07:53, Paolo Borzini wrote:
>>> Hello,
>>>
Yes,
the drive heads are cleaned.
Any other hints?
Paolo
Il 23/05/16 09:32, Rich Mellor ha scritto:
On 23/05/2016 07:53, Paolo Borzini wrote:
Hello,
I've a problem with the floppy drive of my sam coupe.
Typing BOOT or some other command for disk gives me this error "55
Missing disk, 0: 1".
On 23/05/2016 07:53, Paolo Borzini wrote:
Hello,
I've a problem with the floppy drive of my sam coupe.
Typing BOOT or some other command for disk gives me this error "55
Missing disk, 0: 1".
But on manual the errors list ranging from 1 to 54.
I've checked the floppy drive and is well
Hello,
I've a problem with the floppy drive of my sam coupe.
Typing BOOT or some other command for disk gives me this error "55
Missing disk, 0: 1".
But on manual the errors list ranging from 1 to 54.
I've checked the floppy drive and is well connected.
Is there somewhere more detailed
12 matches
Mail list logo